1menu "RealView platform type"
2	depends on ARCH_REALVIEW
3
4config MACH_REALVIEW_EB
5	bool "Support RealView(R) Emulation Baseboard"
6	select ARM_GIC
7	help
8	  Include support for the ARM(R) RealView(R) Emulation Baseboard
9	  platform.
10
11config REALVIEW_EB_A9MP
12	bool "Support Multicore Cortex-A9 Tile"
13	depends on MACH_REALVIEW_EB
14	select CPU_V7
15	help
16	  Enable support for the Cortex-A9MPCore tile fitted to the
17	  Realview(R) Emulation Baseboard platform.
18
19config REALVIEW_EB_ARM11MP
20	bool "Support ARM11MPCore Tile"
21	depends on MACH_REALVIEW_EB
22	select CPU_V6K
23	select ARCH_HAS_BARRIERS if SMP
24	help
25	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
26	  Emulation Baseboard platform.
27
28config REALVIEW_EB_ARM11MP_REVB
29	bool "Support ARM11MPCore RevB Tile"
30	depends on REALVIEW_EB_ARM11MP
31	help
32	  Enable support for the ARM11MPCore Revision B tile on the
33	  Realview(R) Emulation Baseboard platform. Since there are device
34	  address differences, a kernel built with this option enabled is
35	  not compatible with other revisions of the ARM11MPCore tile.
36
37config MACH_REALVIEW_PB11MP
38	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
39	select CPU_V6K
40	select ARM_GIC
41	select HAVE_PATA_PLATFORM
42	select ARCH_HAS_BARRIERS if SMP
43	help
44	  Include support for the ARM(R) RealView(R) Platform Baseboard for
45	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
46	  support for PCI-E and Compact Flash.
47
48# ARMv6 CPU without K extensions, but does have the new exclusive ops
49config MACH_REALVIEW_PB1176
50	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
51	select CPU_V6
52	select ARM_GIC
53	help
54	  Include support for the ARM(R) RealView(R) Platform Baseboard for
55	  ARM1176JZF-S.
56
57config REALVIEW_PB1176_SECURE_FLASH
58	bool "Allow access to the secure flash memory block"
59	depends on MACH_REALVIEW_PB1176
60	default n
61	help
62	  Select this option if Linux will only run in secure mode on the
63	  RealView PB1176 platform and access to the secure flash memory
64	  block (64MB @ 0x3c000000) is required.
65
66config MACH_REALVIEW_PBA8
67	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
68	select CPU_V7
69	select ARM_GIC
70	select HAVE_PATA_PLATFORM
71	help
72	  Include support for the ARM(R) RealView Platform Baseboard for
73	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
74	  support for PCI-E and Compact Flash.
75
76config MACH_REALVIEW_PBX
77	bool "Support RealView(R) Platform Baseboard Explore"
78	select ARM_GIC
79	select HAVE_PATA_PLATFORM
80	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
81	select ZONE_DMA if SPARSEMEM
82	help
83	  Include support for the ARM(R) RealView(R) Platform Baseboard
84	  Explore.
85
86config REALVIEW_HIGH_PHYS_OFFSET
87	bool "High physical base address for the RealView platform"
88	depends on MMU && !MACH_REALVIEW_PB1176
89	default y
90	help
91	  RealView boards other than PB1176 have the RAM available at
92	  0x70000000, 256MB of which being mirrored at 0x00000000. If
93	  the board supports 512MB of RAM, this option allows the
94	  memory to be accessed contiguously at the high physical
95	  offset. On the PBX board, disabling this option allows 1GB of
96	  RAM to be used with SPARSEMEM.
97
98endmenu
99