1#
2# SATA/PATA driver configuration
3#
4
5config HAVE_PATA_PLATFORM
6	bool
7	help
8	  This is an internal configuration node for any machine that
9	  uses pata-platform driver to enable the relevant driver in the
10	  configuration structure without having to submit endless patches
11	  to update the PATA_PLATFORM entry.
12
13menuconfig ATA
14	tristate "Serial ATA and Parallel ATA drivers"
15	depends on HAS_IOMEM
16	depends on BLOCK
17	depends on !(M32R || M68K) || BROKEN
18	select SCSI
19	---help---
20	  If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
21	  any other ATA device under Linux, say Y and make sure that you know
22	  the name of your ATA host adapter (the card inside your computer
23	  that "speaks" the ATA protocol, also called ATA controller),
24	  because you will be asked for it.
25
26	  NOTE: ATA enables basic SCSI support; *however*,
27	  'SCSI disk support', 'SCSI tape support', or
28	  'SCSI CDROM support' may also be needed,
29	  depending on your hardware configuration.
30
31if ATA
32
33config ATA_NONSTANDARD
34       bool
35       default n
36
37config ATA_VERBOSE_ERROR
38	bool "Verbose ATA error reporting"
39	default y
40	help
41	  This option adds parsing of ATA command descriptions and error bits
42	  in libata kernel output, making it easier to interpret.
43	  This option will enlarge the kernel by approx. 6KB. Disable it only
44	  if kernel size is more important than ease of debugging.
45
46	  If unsure, say Y.
47
48config ATA_ACPI
49	bool "ATA ACPI Support"
50	depends on ACPI && PCI
51	default y
52	help
53	  This option adds support for ATA-related ACPI objects.
54	  These ACPI objects add the ability to retrieve taskfiles
55	  from the ACPI BIOS and write them to the disk controller.
56	  These objects may be related to performance, security,
57	  power management, or other areas.
58	  You can disable this at kernel boot time by using the
59	  option libata.noacpi=1
60
61config SATA_PMP
62	bool "SATA Port Multiplier support"
63	default y
64	help
65	  This option adds support for SATA Port Multipliers
66	  (the SATA version of an ethernet hub, or SAS expander).
67
68comment "Controllers with non-SFF native interface"
69
70config SATA_AHCI
71	tristate "AHCI SATA support"
72	depends on PCI
73	help
74	  This option enables support for AHCI Serial ATA.
75
76	  If unsure, say N.
77
78config SATA_AHCI_PLATFORM
79	tristate "Platform AHCI SATA support"
80	help
81	  This option enables support for Platform AHCI Serial ATA
82	  controllers.
83
84	  If unsure, say N.
85
86config SATA_FSL
87	tristate "Freescale 3.0Gbps SATA support"
88	depends on FSL_SOC
89	help
90	  This option enables support for Freescale 3.0Gbps SATA controller.
91	  It can be found on MPC837x and MPC8315.
92
93	  If unsure, say N.
94
95config SATA_INIC162X
96	tristate "Initio 162x SATA support (Very Experimental)"
97	depends on PCI
98	help
99	  This option enables support for Initio 162x Serial ATA.
100
101config SATA_ACARD_AHCI
102	tristate "ACard AHCI variant (ATP 8620)"
103	depends on PCI
104	help
105	  This option enables support for Acard.
106
107	  If unsure, say N.
108
109config SATA_SIL24
110	tristate "Silicon Image 3124/3132 SATA support"
111	depends on PCI
112	help
113	  This option enables support for Silicon Image 3124/3132 Serial ATA.
114
115	  If unsure, say N.
116
117config ATA_SFF
118	bool "ATA SFF support"
119	default y
120	help
121	  This option adds support for ATA controllers with SFF
122	  compliant or similar programming interface.
123
124	  SFF is the legacy IDE interface that has been around since
125	  the dawn of time.  Almost all PATA controllers have an
126	  SFF interface.  Many SATA controllers have an SFF interface
127	  when configured into a legacy compatibility mode.
128
129	  For users with exclusively modern controllers like AHCI,
130	  Silicon Image 3124, or Marvell 6440, you may choose to
131	  disable this unneeded SFF support.
132
133	  If unsure, say Y.
134
135if ATA_SFF
136
137comment "SFF controllers with custom DMA interface"
138
139config PDC_ADMA
140	tristate "Pacific Digital ADMA support"
141	depends on PCI
142	help
143	  This option enables support for Pacific Digital ADMA controllers
144
145	  If unsure, say N.
146
147config PATA_OCTEON_CF
148	tristate "OCTEON Boot Bus Compact Flash support"
149	depends on CPU_CAVIUM_OCTEON
150	help
151	  This option enables a polled compact flash driver for use with
152	  compact flash cards attached to the OCTEON boot bus.
153
154	  If unsure, say N.
155
156config SATA_QSTOR
157	tristate "Pacific Digital SATA QStor support"
158	depends on PCI
159	help
160	  This option enables support for Pacific Digital Serial ATA QStor.
161
162	  If unsure, say N.
163
164config SATA_SX4
165	tristate "Promise SATA SX4 support (Experimental)"
166	depends on PCI && EXPERIMENTAL
167	help
168	  This option enables support for Promise Serial ATA SX4.
169
170	  If unsure, say N.
171
172config ATA_BMDMA
173	bool "ATA BMDMA support"
174	default y
175	help
176	  This option adds support for SFF ATA controllers with BMDMA
177	  capability.  BMDMA stands for bus-master DMA and is the
178	  de facto DMA interface for SFF controllers.
179
180	  If unsure, say Y.
181
182if ATA_BMDMA
183
184comment "SATA SFF controllers with BMDMA"
185
186config ATA_PIIX
187	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
188	depends on PCI
189	help
190	  This option enables support for ICH5/6/7/8 Serial ATA
191	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
192	  host controllers.
193
194	  If unsure, say N.
195
196config SATA_DWC
197	tristate "DesignWare Cores SATA support"
198	depends on 460EX
199	help
200	  This option enables support for the on-chip SATA controller of the
201	  AppliedMicro processor 460EX.
202
203	  If unsure, say N.
204
205config SATA_DWC_DEBUG
206	bool "Debugging driver version"
207	depends on SATA_DWC
208	help
209	  This option enables debugging output in the driver.
210
211config SATA_DWC_VDEBUG
212	bool "Verbose debug output"
213	depends on SATA_DWC_DEBUG
214	help
215	  This option enables the taskfile dumping and NCQ debugging.
216
217config SATA_MV
218	tristate "Marvell SATA support"
219	help
220	  This option enables support for the Marvell Serial ATA family.
221	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
222	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
223
224	  If unsure, say N.
225
226config SATA_NV
227	tristate "NVIDIA SATA support"
228	depends on PCI
229	help
230	  This option enables support for NVIDIA Serial ATA.
231
232	  If unsure, say N.
233
234config SATA_PROMISE
235	tristate "Promise SATA TX2/TX4 support"
236	depends on PCI
237	help
238	  This option enables support for Promise Serial ATA TX2/TX4.
239
240	  If unsure, say N.
241
242config SATA_SIL
243	tristate "Silicon Image SATA support"
244	depends on PCI
245	help
246	  This option enables support for Silicon Image Serial ATA.
247
248	  If unsure, say N.
249
250config SATA_SIS
251	tristate "SiS 964/965/966/180 SATA support"
252	depends on PCI
253	select PATA_SIS
254	help
255	  This option enables support for SiS Serial ATA on
256	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
257	  The PATA support for SiS 180 requires additionally to
258	  enable the PATA_SIS driver in the config.
259	  If unsure, say N.
260
261config SATA_SVW
262	tristate "ServerWorks Frodo / Apple K2 SATA support"
263	depends on PCI
264	help
265	  This option enables support for Broadcom/Serverworks/Apple K2
266	  SATA support.
267
268	  If unsure, say N.
269
270config SATA_ULI
271	tristate "ULi Electronics SATA support"
272	depends on PCI
273	help
274	  This option enables support for ULi Electronics SATA.
275
276	  If unsure, say N.
277
278config SATA_VIA
279	tristate "VIA SATA support"
280	depends on PCI
281	help
282	  This option enables support for VIA Serial ATA.
283
284	  If unsure, say N.
285
286config SATA_VITESSE
287	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
288	depends on PCI
289	help
290	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
291
292	  If unsure, say N.
293
294comment "PATA SFF controllers with BMDMA"
295
296config PATA_ALI
297	tristate "ALi PATA support"
298	depends on PCI
299	help
300	  This option enables support for the ALi ATA interfaces
301	  found on the many ALi chipsets.
302
303	  If unsure, say N.
304
305config PATA_AMD
306	tristate "AMD/NVidia PATA support"
307	depends on PCI
308	help
309	  This option enables support for the AMD and NVidia PATA
310	  interfaces found on the chipsets for Athlon/Athlon64.
311
312	  If unsure, say N.
313
314config PATA_ARASAN_CF
315	tristate "ARASAN CompactFlash PATA Controller Support"
316	depends on DMADEVICES
317	select DMA_ENGINE
318	help
319	  Say Y here to support the ARASAN CompactFlash PATA controller
320
321config PATA_ARTOP
322	tristate "ARTOP 6210/6260 PATA support"
323	depends on PCI
324	help
325	  This option enables support for ARTOP PATA controllers.
326
327	  If unsure, say N.
328
329config PATA_ATIIXP
330	tristate "ATI PATA support"
331	depends on PCI
332	help
333	  This option enables support for the ATI ATA interfaces
334	  found on the many ATI chipsets.
335
336	  If unsure, say N.
337
338config PATA_ATP867X
339	tristate "ARTOP/Acard ATP867X PATA support"
340	depends on PCI
341	help
342	  This option enables support for ARTOP/Acard ATP867X PATA
343	  controllers.
344
345	  If unsure, say N.
346
347config PATA_BF54X
348	tristate "Blackfin 54x ATAPI support"
349	depends on BF542 || BF548 || BF549
350	help
351	  This option enables support for the built-in ATAPI controller on
352	  Blackfin 54x family chips.
353
354	  If unsure, say N.
355
356config PATA_CMD64X
357	tristate "CMD64x PATA support"
358	depends on PCI
359	help
360	  This option enables support for the CMD64x series chips
361	  except for the CMD640.
362
363	  If unsure, say N.
364
365config PATA_CS5520
366	tristate "CS5510/5520 PATA support"
367	depends on PCI
368	help
369	  This option enables support for the Cyrix 5510/5520
370	  companion chip used with the MediaGX/Geode processor family.
371
372	  If unsure, say N.
373
374config PATA_CS5530
375	tristate "CS5530 PATA support"
376	depends on PCI
377	help
378	  This option enables support for the Cyrix/NatSemi/AMD CS5530
379	  companion chip used with the MediaGX/Geode processor family.
380
381	  If unsure, say N.
382
383config PATA_CS5535
384	tristate "CS5535 PATA support (Experimental)"
385	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
386	help
387	  This option enables support for the NatSemi/AMD CS5535
388	  companion chip used with the Geode processor family.
389
390	  If unsure, say N.
391
392config PATA_CS5536
393	tristate "CS5536 PATA support"
394	depends on PCI
395	help
396	  This option enables support for the AMD CS5536
397	  companion chip used with the Geode LX processor family.
398
399	  If unsure, say N.
400
401config PATA_CYPRESS
402	tristate "Cypress CY82C693 PATA support (Very Experimental)"
403	depends on PCI && EXPERIMENTAL
404	help
405	  This option enables support for the Cypress/Contaq CY82C693
406	  chipset found in some Alpha systems
407
408	  If unsure, say N.
409
410config PATA_EFAR
411	tristate "EFAR SLC90E66 support"
412	depends on PCI
413	help
414	  This option enables support for the EFAR SLC90E66
415	  IDE controller found on some older machines.
416
417	  If unsure, say N.
418
419config PATA_HPT366
420	tristate "HPT 366/368 PATA support"
421	depends on PCI
422	help
423	  This option enables support for the HPT 366 and 368
424	  PATA controllers via the new ATA layer.
425
426	  If unsure, say N.
427
428config PATA_HPT37X
429	tristate "HPT 370/370A/371/372/374/302 PATA support"
430	depends on PCI
431	help
432	  This option enables support for the majority of the later HPT
433	  PATA controllers via the new ATA layer.
434
435	  If unsure, say N.
436
437config PATA_HPT3X2N
438	tristate "HPT 371N/372N/302N PATA support"
439	depends on PCI
440	help
441	  This option enables support for the N variant HPT PATA
442	  controllers via the new ATA layer.
443
444	  If unsure, say N.
445
446config PATA_HPT3X3
447	tristate "HPT 343/363 PATA support"
448	depends on PCI
449	help
450	  This option enables support for the HPT 343/363
451	  PATA controllers via the new ATA layer
452
453	  If unsure, say N.
454
455config PATA_HPT3X3_DMA
456	bool "HPT 343/363 DMA support"
457	depends on PATA_HPT3X3
458	help
459	  This option enables DMA support for the HPT343/363
460	  controllers. Enable with care as there are still some
461	  problems with DMA on this chipset.
462
463config PATA_ICSIDE
464	tristate "Acorn ICS PATA support"
465	depends on ARM && ARCH_ACORN
466	help
467	  On Acorn systems, say Y here if you wish to use the ICS PATA
468	  interface card.  This is not required for ICS partition support.
469	  If you are unsure, say N to this.
470
471config PATA_IMX
472	tristate "PATA support for Freescale iMX"
473	depends on ARCH_MXC
474	help
475	  This option enables support for the PATA host available on Freescale
476          iMX SoCs.
477
478	  If unsure, say N.
479
480config PATA_IT8213
481	tristate "IT8213 PATA support (Experimental)"
482	depends on PCI && EXPERIMENTAL
483	help
484	  This option enables support for the ITE 821 PATA
485          controllers via the new ATA layer.
486
487	  If unsure, say N.
488
489config PATA_IT821X
490	tristate "IT8211/2 PATA support"
491	depends on PCI
492	help
493	  This option enables support for the ITE 8211 and 8212
494	  PATA controllers via the new ATA layer, including RAID
495	  mode.
496
497	  If unsure, say N.
498
499config PATA_JMICRON
500	tristate "JMicron PATA support"
501	depends on PCI
502	help
503	  Enable support for the JMicron IDE controller, via the new
504	  ATA layer.
505
506	  If unsure, say N.
507
508config PATA_MACIO
509	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
510	depends on PPC_PMAC
511	help
512	  Most IDE capable PowerMacs have IDE busses driven by a variant
513          of this controller which is part of the Apple chipset used on
514          most PowerMac models. Some models have multiple busses using
515          different chipsets, though generally, MacIO is one of them.
516
517config PATA_MARVELL
518	tristate "Marvell PATA support via legacy mode"
519	depends on PCI
520	help
521	  This option enables limited support for the Marvell 88SE61xx ATA
522	  controllers. If you wish to use only the SATA ports then select
523	  the AHCI driver alone. If you wish to the use the PATA port or
524	  both SATA and PATA include this driver.
525
526	  If unsure, say N.
527
528config PATA_MPC52xx
529	tristate "Freescale MPC52xx SoC internal IDE"
530	depends on PPC_MPC52xx && PPC_BESTCOMM
531	select PPC_BESTCOMM_ATA
532	help
533	  This option enables support for integrated IDE controller
534	  of the Freescale MPC52xx SoC.
535
536	  If unsure, say N.
537
538config PATA_NETCELL
539	tristate "NETCELL Revolution RAID support"
540	depends on PCI
541	help
542	  This option enables support for the Netcell Revolution RAID
543	  PATA controller.
544
545	  If unsure, say N.
546
547config PATA_NINJA32
548	tristate "Ninja32/Delkin Cardbus ATA support"
549	depends on PCI
550	help
551	  This option enables support for the Ninja32, Delkin and
552	  possibly other brands of Cardbus ATA adapter
553
554	  If unsure, say N.
555
556config PATA_NS87415
557	tristate "Nat Semi NS87415 PATA support"
558	depends on PCI
559	help
560	  This option enables support for the National Semiconductor
561	  NS87415 PCI-IDE controller.
562
563	  If unsure, say N.
564
565config PATA_OLDPIIX
566	tristate "Intel PATA old PIIX support"
567	depends on PCI
568	help
569	  This option enables support for early PIIX PATA support.
570
571	  If unsure, say N.
572
573config PATA_OPTIDMA
574	tristate "OPTI FireStar PATA support (Very Experimental)"
575	depends on PCI && EXPERIMENTAL
576	help
577	  This option enables DMA/PIO support for the later OPTi
578	  controllers found on some old motherboards and in some
579	  laptops.
580
581	  If unsure, say N.
582
583config PATA_PDC2027X
584	tristate "Promise PATA 2027x support"
585	depends on PCI
586	help
587	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
588
589	  If unsure, say N.
590
591config PATA_PDC_OLD
592	tristate "Older Promise PATA controller support"
593	depends on PCI
594	help
595	  This option enables support for the Promise 20246, 20262, 20263,
596	  20265 and 20267 adapters.
597
598	  If unsure, say N.
599
600config PATA_RADISYS
601	tristate "RADISYS 82600 PATA support (Experimental)"
602	depends on PCI && EXPERIMENTAL
603	help
604	  This option enables support for the RADISYS 82600
605	  PATA controllers via the new ATA layer
606
607	  If unsure, say N.
608
609config PATA_RDC
610	tristate "RDC PATA support"
611	depends on PCI
612	help
613	  This option enables basic support for the later RDC PATA controllers
614	  controllers via the new ATA layer. For the RDC 1010, you need to
615	  enable the IT821X driver instead.
616
617	  If unsure, say N.
618
619config PATA_SC1200
620	tristate "SC1200 PATA support"
621	depends on PCI
622	help
623	  This option enables support for the NatSemi/AMD SC1200 SoC
624	  companion chip used with the Geode processor family.
625
626	  If unsure, say N.
627
628config PATA_SCC
629	tristate "Toshiba's Cell Reference Set IDE support"
630	depends on PCI && PPC_CELLEB
631	help
632	  This option enables support for the built-in IDE controller on
633	  Toshiba Cell Reference Board.
634
635	  If unsure, say N.
636
637config PATA_SCH
638	tristate "Intel SCH PATA support"
639	depends on PCI
640	help
641	  This option enables support for Intel SCH PATA on the Intel
642	  SCH (US15W, US15L, UL11L) series host controllers.
643
644	  If unsure, say N.
645
646config PATA_SERVERWORKS
647	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
648	depends on PCI
649	help
650	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
651	  HT1000 PATA controllers, via the new ATA layer.
652
653	  If unsure, say N.
654
655config PATA_SIL680
656	tristate "CMD / Silicon Image 680 PATA support"
657	depends on PCI
658	help
659	  This option enables support for CMD / Silicon Image 680 PATA.
660
661	  If unsure, say N.
662
663config PATA_SIS
664	tristate "SiS PATA support"
665	depends on PCI
666	help
667	  This option enables support for SiS PATA controllers
668
669	  If unsure, say N.
670
671config PATA_TOSHIBA
672	tristate "Toshiba Piccolo support (Experimental)"
673	depends on PCI && EXPERIMENTAL
674	help
675	  Support for the Toshiba Piccolo controllers. Currently only the
676	  primary channel is supported by this driver.
677
678	  If unsure, say N.
679
680config PATA_TRIFLEX
681	tristate "Compaq Triflex PATA support"
682	depends on PCI
683	help
684	  Enable support for the Compaq 'Triflex' IDE controller as found
685	  on many Compaq Pentium-Pro systems, via the new ATA layer.
686
687	  If unsure, say N.
688
689config PATA_VIA
690	tristate "VIA PATA support"
691	depends on PCI
692	help
693	  This option enables support for the VIA PATA interfaces
694	  found on the many VIA chipsets.
695
696	  If unsure, say N.
697
698config PATA_PXA
699	tristate "PXA DMA-capable PATA support"
700	depends on ARCH_PXA
701	help
702	  This option enables support for harddrive attached to PXA CPU's bus.
703
704	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
705	        is not capable of doing MWDMA, use pata_platform instead.
706
707	  If unsure, say N.
708
709config PATA_WINBOND
710	tristate "Winbond SL82C105 PATA support"
711	depends on PCI
712	help
713	  This option enables support for SL82C105 PATA devices found in the
714	  Netwinder and some other systems
715
716	  If unsure, say N.
717
718endif # ATA_BMDMA
719
720comment "PIO-only SFF controllers"
721
722config PATA_AT32
723	tristate "Atmel AVR32 PATA support (Experimental)"
724	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
725	help
726	  This option enables support for the IDE devices on the
727	  Atmel AT32AP platform.
728
729	  If unsure, say N.
730
731config PATA_AT91
732	tristate "PATA support for AT91SAM9260"
733	depends on ARM && ARCH_AT91
734	help
735	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
736
737	  If unsure, say N.
738
739config PATA_CMD640_PCI
740	tristate "CMD640 PCI PATA support (Experimental)"
741	depends on PCI && EXPERIMENTAL
742	help
743	  This option enables support for the CMD640 PCI IDE
744	  interface chip. Only the primary channel is currently
745	  supported.
746
747	  If unsure, say N.
748
749config PATA_ISAPNP
750	tristate "ISA Plug and Play PATA support"
751	depends on ISAPNP
752	help
753	  This option enables support for ISA plug & play ATA
754	  controllers such as those found on old soundcards.
755
756	  If unsure, say N.
757
758config PATA_IXP4XX_CF
759	tristate "IXP4XX Compact Flash support"
760	depends on ARCH_IXP4XX
761	help
762	  This option enables support for a Compact Flash connected on
763	  the ixp4xx expansion bus. This driver had been written for
764	  Loft/Avila boards in mind but can work with others.
765
766	  If unsure, say N.
767
768config PATA_MPIIX
769	tristate "Intel PATA MPIIX support"
770	depends on PCI
771	help
772	  This option enables support for MPIIX PATA support.
773
774	  If unsure, say N.
775
776config PATA_NS87410
777	tristate "Nat Semi NS87410 PATA support"
778	depends on PCI
779	help
780	  This option enables support for the National Semiconductor
781	  NS87410 PCI-IDE controller.
782
783	  If unsure, say N.
784
785config PATA_OPTI
786	tristate "OPTI621/6215 PATA support (Very Experimental)"
787	depends on PCI && EXPERIMENTAL
788	help
789	  This option enables full PIO support for the early Opti ATA
790	  controllers found on some old motherboards.
791
792	  If unsure, say N.
793
794config PATA_PALMLD
795	tristate "Palm LifeDrive PATA support"
796	depends on MACH_PALMLD
797	help
798	  This option enables support for Palm LifeDrive's internal ATA
799	  port via the new ATA layer.
800
801	  If unsure, say N.
802
803config PATA_PCMCIA
804	tristate "PCMCIA PATA support"
805	depends on PCMCIA
806	help
807	  This option enables support for PCMCIA ATA interfaces, including
808	  compact flash card adapters via the new ATA layer.
809
810	  If unsure, say N.
811
812config PATA_PLATFORM
813	tristate "Generic platform device PATA support"
814	depends on EXPERT || PPC || HAVE_PATA_PLATFORM
815	help
816	  This option enables support for generic directly connected ATA
817	  devices commonly found on embedded systems.
818
819	  If unsure, say N.
820
821config PATA_OF_PLATFORM
822	tristate "OpenFirmware platform device PATA support"
823	depends on PATA_PLATFORM && OF
824	help
825	  This option enables support for generic directly connected ATA
826	  devices commonly found on embedded systems with OpenFirmware
827	  bindings.
828
829	  If unsure, say N.
830
831config PATA_QDI
832	tristate "QDI VLB PATA support"
833	depends on ISA
834	select PATA_LEGACY
835	help
836	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
837
838config PATA_RB532
839	tristate "RouterBoard 532 PATA CompactFlash support"
840	depends on MIKROTIK_RB532
841	help
842	  This option enables support for the RouterBoard 532
843	  PATA CompactFlash controller.
844
845	  If unsure, say N.
846
847config PATA_RZ1000
848	tristate "PC Tech RZ1000 PATA support"
849	depends on PCI
850	help
851	  This option enables basic support for the PC Tech RZ1000/1
852	  PATA controllers via the new ATA layer
853
854	  If unsure, say N.
855
856config PATA_SAMSUNG_CF
857	tristate "Samsung SoC PATA support"
858	depends on SAMSUNG_DEV_IDE
859	help
860	  This option enables basic support for Samsung's S3C/S5P board
861	  PATA controllers via the new ATA layer
862
863	  If unsure, say N.
864
865config PATA_WINBOND_VLB
866	tristate "Winbond W83759A VLB PATA support (Experimental)"
867	depends on ISA && EXPERIMENTAL
868	select PATA_LEGACY
869	help
870	  Support for the Winbond W83759A controller on Vesa Local Bus
871	  systems.
872
873comment "Generic fallback / legacy drivers"
874
875config PATA_ACPI
876	tristate "ACPI firmware driver for PATA"
877	depends on ATA_ACPI && ATA_BMDMA
878	help
879	  This option enables an ACPI method driver which drives
880	  motherboard PATA controller interfaces through the ACPI
881	  firmware in the BIOS. This driver can sometimes handle
882	  otherwise unsupported hardware.
883
884config ATA_GENERIC
885	tristate "Generic ATA support"
886	depends on PCI && ATA_BMDMA
887	help
888	  This option enables support for generic BIOS configured
889	  ATA controllers via the new ATA layer
890
891	  If unsure, say N.
892
893config PATA_LEGACY
894	tristate "Legacy ISA PATA support (Experimental)"
895	depends on (ISA || PCI) && EXPERIMENTAL
896	help
897	  This option enables support for ISA/VLB/PCI bus legacy PATA
898	  ports and allows them to be accessed via the new ATA layer.
899
900	  If unsure, say N.
901
902endif # ATA_SFF
903endif # ATA
904