1#
2# SATA/PATA driver configuration
3#
4
5config HAVE_PATA_PLATFORM
6	bool
7	help
8	  This is an internal configuration node for any machine that
9	  uses pata-platform driver to enable the relevant driver in the
10	  configuration structure without having to submit endless patches
11	  to update the PATA_PLATFORM entry.
12
13menuconfig ATA
14	tristate "Serial ATA and Parallel ATA drivers"
15	depends on HAS_IOMEM
16	depends on BLOCK
17	depends on !(M32R || M68K) || BROKEN
18	select SCSI
19	---help---
20	  If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
21	  any other ATA device under Linux, say Y and make sure that you know
22	  the name of your ATA host adapter (the card inside your computer
23	  that "speaks" the ATA protocol, also called ATA controller),
24	  because you will be asked for it.
25
26	  NOTE: ATA enables basic SCSI support; *however*,
27	  'SCSI disk support', 'SCSI tape support', or
28	  'SCSI CDROM support' may also be needed,
29	  depending on your hardware configuration.
30
31if ATA
32
33config ATA_NONSTANDARD
34       bool
35       default n
36
37config ATA_VERBOSE_ERROR
38	bool "Verbose ATA error reporting"
39	default y
40	help
41	  This option adds parsing of ATA command descriptions and error bits
42	  in libata kernel output, making it easier to interpret.
43	  This option will enlarge the kernel by approx. 6KB. Disable it only
44	  if kernel size is more important than ease of debugging.
45
46	  If unsure, say Y.
47
48config ATA_ACPI
49	bool "ATA ACPI Support"
50	depends on ACPI && PCI
51	default y
52	help
53	  This option adds support for ATA-related ACPI objects.
54	  These ACPI objects add the ability to retrieve taskfiles
55	  from the ACPI BIOS and write them to the disk controller.
56	  These objects may be related to performance, security,
57	  power management, or other areas.
58	  You can disable this at kernel boot time by using the
59	  option libata.noacpi=1
60
61config SATA_PMP
62	bool "SATA Port Multiplier support"
63	default y
64	help
65	  This option adds support for SATA Port Multipliers
66	  (the SATA version of an ethernet hub, or SAS expander).
67
68comment "Controllers with non-SFF native interface"
69
70config SATA_AHCI
71	tristate "AHCI SATA support"
72	depends on PCI
73	help
74	  This option enables support for AHCI Serial ATA.
75
76	  If unsure, say N.
77
78config SATA_AHCI_PLATFORM
79	tristate "Platform AHCI SATA support"
80	help
81	  This option enables support for Platform AHCI Serial ATA
82	  controllers.
83
84	  If unsure, say N.
85
86config SATA_FSL
87	tristate "Freescale 3.0Gbps SATA support"
88	depends on FSL_SOC
89	help
90	  This option enables support for Freescale 3.0Gbps SATA controller.
91	  It can be found on MPC837x and MPC8315.
92
93	  If unsure, say N.
94
95config SATA_INIC162X
96	tristate "Initio 162x SATA support"
97	depends on PCI
98	help
99	  This option enables support for Initio 162x Serial ATA.
100
101config SATA_ACARD_AHCI
102	tristate "ACard AHCI variant (ATP 8620)"
103	depends on PCI
104	help
105	  This option enables support for Acard.
106
107	  If unsure, say N.
108
109config SATA_SIL24
110	tristate "Silicon Image 3124/3132 SATA support"
111	depends on PCI
112	help
113	  This option enables support for Silicon Image 3124/3132 Serial ATA.
114
115	  If unsure, say N.
116
117config ATA_SFF
118	bool "ATA SFF support"
119	default y
120	help
121	  This option adds support for ATA controllers with SFF
122	  compliant or similar programming interface.
123
124	  SFF is the legacy IDE interface that has been around since
125	  the dawn of time.  Almost all PATA controllers have an
126	  SFF interface.  Many SATA controllers have an SFF interface
127	  when configured into a legacy compatibility mode.
128
129	  For users with exclusively modern controllers like AHCI,
130	  Silicon Image 3124, or Marvell 6440, you may choose to
131	  disable this unneeded SFF support.
132
133	  If unsure, say Y.
134
135if ATA_SFF
136
137comment "SFF controllers with custom DMA interface"
138
139config PDC_ADMA
140	tristate "Pacific Digital ADMA support"
141	depends on PCI
142	help
143	  This option enables support for Pacific Digital ADMA controllers
144
145	  If unsure, say N.
146
147config PATA_OCTEON_CF
148	tristate "OCTEON Boot Bus Compact Flash support"
149	depends on CPU_CAVIUM_OCTEON
150	help
151	  This option enables a polled compact flash driver for use with
152	  compact flash cards attached to the OCTEON boot bus.
153
154	  If unsure, say N.
155
156config SATA_QSTOR
157	tristate "Pacific Digital SATA QStor support"
158	depends on PCI
159	help
160	  This option enables support for Pacific Digital Serial ATA QStor.
161
162	  If unsure, say N.
163
164config SATA_SX4
165	tristate "Promise SATA SX4 support (Experimental)"
166	depends on PCI && EXPERIMENTAL
167	help
168	  This option enables support for Promise Serial ATA SX4.
169
170	  If unsure, say N.
171
172config ATA_BMDMA
173	bool "ATA BMDMA support"
174	default y
175	help
176	  This option adds support for SFF ATA controllers with BMDMA
177	  capability.  BMDMA stands for bus-master DMA and is the
178	  de facto DMA interface for SFF controllers.
179
180	  If unsure, say Y.
181
182if ATA_BMDMA
183
184comment "SATA SFF controllers with BMDMA"
185
186config ATA_PIIX
187	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
188	depends on PCI
189	help
190	  This option enables support for ICH5/6/7/8 Serial ATA
191	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
192	  host controllers.
193
194	  If unsure, say N.
195
196config SATA_DWC
197	tristate "DesignWare Cores SATA support"
198	depends on 460EX
199	help
200	  This option enables support for the on-chip SATA controller of the
201	  AppliedMicro processor 460EX.
202
203	  If unsure, say N.
204
205config SATA_DWC_DEBUG
206	bool "Debugging driver version"
207	depends on SATA_DWC
208	help
209	  This option enables debugging output in the driver.
210
211config SATA_DWC_VDEBUG
212	bool "Verbose debug output"
213	depends on SATA_DWC_DEBUG
214	help
215	  This option enables the taskfile dumping and NCQ debugging.
216
217config SATA_MV
218	tristate "Marvell SATA support"
219	help
220	  This option enables support for the Marvell Serial ATA family.
221	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
222	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
223
224	  If unsure, say N.
225
226config SATA_NV
227	tristate "NVIDIA SATA support"
228	depends on PCI
229	help
230	  This option enables support for NVIDIA Serial ATA.
231
232	  If unsure, say N.
233
234config SATA_PROMISE
235	tristate "Promise SATA TX2/TX4 support"
236	depends on PCI
237	help
238	  This option enables support for Promise Serial ATA TX2/TX4.
239
240	  If unsure, say N.
241
242config SATA_SIL
243	tristate "Silicon Image SATA support"
244	depends on PCI
245	help
246	  This option enables support for Silicon Image Serial ATA.
247
248	  If unsure, say N.
249
250config SATA_SIS
251	tristate "SiS 964/965/966/180 SATA support"
252	depends on PCI
253	select PATA_SIS
254	help
255	  This option enables support for SiS Serial ATA on
256	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
257	  The PATA support for SiS 180 requires additionally to
258	  enable the PATA_SIS driver in the config.
259	  If unsure, say N.
260
261config SATA_SVW
262	tristate "ServerWorks Frodo / Apple K2 SATA support"
263	depends on PCI
264	help
265	  This option enables support for Broadcom/Serverworks/Apple K2
266	  SATA support.
267
268	  If unsure, say N.
269
270config SATA_ULI
271	tristate "ULi Electronics SATA support"
272	depends on PCI
273	help
274	  This option enables support for ULi Electronics SATA.
275
276	  If unsure, say N.
277
278config SATA_VIA
279	tristate "VIA SATA support"
280	depends on PCI
281	help
282	  This option enables support for VIA Serial ATA.
283
284	  If unsure, say N.
285
286config SATA_VITESSE
287	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
288	depends on PCI
289	help
290	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
291
292	  If unsure, say N.
293
294comment "PATA SFF controllers with BMDMA"
295
296config PATA_ALI
297	tristate "ALi PATA support"
298	depends on PCI
299	help
300	  This option enables support for the ALi ATA interfaces
301	  found on the many ALi chipsets.
302
303	  If unsure, say N.
304
305config PATA_AMD
306	tristate "AMD/NVidia PATA support"
307	depends on PCI
308	help
309	  This option enables support for the AMD and NVidia PATA
310	  interfaces found on the chipsets for Athlon/Athlon64.
311
312	  If unsure, say N.
313
314config PATA_ARASAN_CF
315	tristate "ARASAN CompactFlash PATA Controller Support"
316	select DMA_ENGINE
317	help
318	  Say Y here to support the ARASAN CompactFlash PATA controller
319
320config PATA_ARTOP
321	tristate "ARTOP 6210/6260 PATA support"
322	depends on PCI
323	help
324	  This option enables support for ARTOP PATA controllers.
325
326	  If unsure, say N.
327
328config PATA_ATIIXP
329	tristate "ATI PATA support"
330	depends on PCI
331	help
332	  This option enables support for the ATI ATA interfaces
333	  found on the many ATI chipsets.
334
335	  If unsure, say N.
336
337config PATA_ATP867X
338	tristate "ARTOP/Acard ATP867X PATA support"
339	depends on PCI
340	help
341	  This option enables support for ARTOP/Acard ATP867X PATA
342	  controllers.
343
344	  If unsure, say N.
345
346config PATA_BF54X
347	tristate "Blackfin 54x ATAPI support"
348	depends on BF542 || BF548 || BF549
349	help
350	  This option enables support for the built-in ATAPI controller on
351	  Blackfin 54x family chips.
352
353	  If unsure, say N.
354
355config PATA_CMD64X
356	tristate "CMD64x PATA support"
357	depends on PCI
358	help
359	  This option enables support for the CMD64x series chips
360	  except for the CMD640.
361
362	  If unsure, say N.
363
364config PATA_CS5520
365	tristate "CS5510/5520 PATA support"
366	depends on PCI
367	help
368	  This option enables support for the Cyrix 5510/5520
369	  companion chip used with the MediaGX/Geode processor family.
370
371	  If unsure, say N.
372
373config PATA_CS5530
374	tristate "CS5530 PATA support"
375	depends on PCI
376	help
377	  This option enables support for the Cyrix/NatSemi/AMD CS5530
378	  companion chip used with the MediaGX/Geode processor family.
379
380	  If unsure, say N.
381
382config PATA_CS5535
383	tristate "CS5535 PATA support (Experimental)"
384	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
385	help
386	  This option enables support for the NatSemi/AMD CS5535
387	  companion chip used with the Geode processor family.
388
389	  If unsure, say N.
390
391config PATA_CS5536
392	tristate "CS5536 PATA support"
393	depends on PCI
394	help
395	  This option enables support for the AMD CS5536
396	  companion chip used with the Geode LX processor family.
397
398	  If unsure, say N.
399
400config PATA_CYPRESS
401	tristate "Cypress CY82C693 PATA support (Very Experimental)"
402	depends on PCI && EXPERIMENTAL
403	help
404	  This option enables support for the Cypress/Contaq CY82C693
405	  chipset found in some Alpha systems
406
407	  If unsure, say N.
408
409config PATA_EFAR
410	tristate "EFAR SLC90E66 support"
411	depends on PCI
412	help
413	  This option enables support for the EFAR SLC90E66
414	  IDE controller found on some older machines.
415
416	  If unsure, say N.
417
418config PATA_HPT366
419	tristate "HPT 366/368 PATA support"
420	depends on PCI
421	help
422	  This option enables support for the HPT 366 and 368
423	  PATA controllers via the new ATA layer.
424
425	  If unsure, say N.
426
427config PATA_HPT37X
428	tristate "HPT 370/370A/371/372/374/302 PATA support"
429	depends on PCI
430	help
431	  This option enables support for the majority of the later HPT
432	  PATA controllers via the new ATA layer.
433
434	  If unsure, say N.
435
436config PATA_HPT3X2N
437	tristate "HPT 371N/372N/302N PATA support"
438	depends on PCI
439	help
440	  This option enables support for the N variant HPT PATA
441	  controllers via the new ATA layer.
442
443	  If unsure, say N.
444
445config PATA_HPT3X3
446	tristate "HPT 343/363 PATA support"
447	depends on PCI
448	help
449	  This option enables support for the HPT 343/363
450	  PATA controllers via the new ATA layer
451
452	  If unsure, say N.
453
454config PATA_HPT3X3_DMA
455	bool "HPT 343/363 DMA support"
456	depends on PATA_HPT3X3
457	help
458	  This option enables DMA support for the HPT343/363
459	  controllers. Enable with care as there are still some
460	  problems with DMA on this chipset.
461
462config PATA_ICSIDE
463	tristate "Acorn ICS PATA support"
464	depends on ARM && ARCH_ACORN
465	help
466	  On Acorn systems, say Y here if you wish to use the ICS PATA
467	  interface card.  This is not required for ICS partition support.
468	  If you are unsure, say N to this.
469
470config PATA_IT8213
471	tristate "IT8213 PATA support (Experimental)"
472	depends on PCI && EXPERIMENTAL
473	help
474	  This option enables support for the ITE 821 PATA
475          controllers via the new ATA layer.
476
477	  If unsure, say N.
478
479config PATA_IT821X
480	tristate "IT8211/2 PATA support"
481	depends on PCI
482	help
483	  This option enables support for the ITE 8211 and 8212
484	  PATA controllers via the new ATA layer, including RAID
485	  mode.
486
487	  If unsure, say N.
488
489config PATA_JMICRON
490	tristate "JMicron PATA support"
491	depends on PCI
492	help
493	  Enable support for the JMicron IDE controller, via the new
494	  ATA layer.
495
496	  If unsure, say N.
497
498config PATA_MACIO
499	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
500	depends on PPC_PMAC
501	help
502	  Most IDE capable PowerMacs have IDE busses driven by a variant
503          of this controller which is part of the Apple chipset used on
504          most PowerMac models. Some models have multiple busses using
505          different chipsets, though generally, MacIO is one of them.
506
507config PATA_MARVELL
508	tristate "Marvell PATA support via legacy mode"
509	depends on PCI
510	help
511	  This option enables limited support for the Marvell 88SE61xx ATA
512	  controllers. If you wish to use only the SATA ports then select
513	  the AHCI driver alone. If you wish to the use the PATA port or
514	  both SATA and PATA include this driver.
515
516	  If unsure, say N.
517
518config PATA_MPC52xx
519	tristate "Freescale MPC52xx SoC internal IDE"
520	depends on PPC_MPC52xx && PPC_BESTCOMM
521	select PPC_BESTCOMM_ATA
522	help
523	  This option enables support for integrated IDE controller
524	  of the Freescale MPC52xx SoC.
525
526	  If unsure, say N.
527
528config PATA_NETCELL
529	tristate "NETCELL Revolution RAID support"
530	depends on PCI
531	help
532	  This option enables support for the Netcell Revolution RAID
533	  PATA controller.
534
535	  If unsure, say N.
536
537config PATA_NINJA32
538	tristate "Ninja32/Delkin Cardbus ATA support"
539	depends on PCI
540	help
541	  This option enables support for the Ninja32, Delkin and
542	  possibly other brands of Cardbus ATA adapter
543
544	  If unsure, say N.
545
546config PATA_NS87415
547	tristate "Nat Semi NS87415 PATA support"
548	depends on PCI
549	help
550	  This option enables support for the National Semiconductor
551	  NS87415 PCI-IDE controller.
552
553	  If unsure, say N.
554
555config PATA_OLDPIIX
556	tristate "Intel PATA old PIIX support"
557	depends on PCI
558	help
559	  This option enables support for early PIIX PATA support.
560
561	  If unsure, say N.
562
563config PATA_OPTIDMA
564	tristate "OPTI FireStar PATA support (Very Experimental)"
565	depends on PCI && EXPERIMENTAL
566	help
567	  This option enables DMA/PIO support for the later OPTi
568	  controllers found on some old motherboards and in some
569	  laptops.
570
571	  If unsure, say N.
572
573config PATA_PDC2027X
574	tristate "Promise PATA 2027x support"
575	depends on PCI
576	help
577	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
578
579	  If unsure, say N.
580
581config PATA_PDC_OLD
582	tristate "Older Promise PATA controller support"
583	depends on PCI
584	help
585	  This option enables support for the Promise 20246, 20262, 20263,
586	  20265 and 20267 adapters.
587
588	  If unsure, say N.
589
590config PATA_RADISYS
591	tristate "RADISYS 82600 PATA support (Experimental)"
592	depends on PCI && EXPERIMENTAL
593	help
594	  This option enables support for the RADISYS 82600
595	  PATA controllers via the new ATA layer
596
597	  If unsure, say N.
598
599config PATA_RDC
600	tristate "RDC PATA support"
601	depends on PCI
602	help
603	  This option enables basic support for the later RDC PATA controllers
604	  controllers via the new ATA layer. For the RDC 1010, you need to
605	  enable the IT821X driver instead.
606
607	  If unsure, say N.
608
609config PATA_SC1200
610	tristate "SC1200 PATA support"
611	depends on PCI
612	help
613	  This option enables support for the NatSemi/AMD SC1200 SoC
614	  companion chip used with the Geode processor family.
615
616	  If unsure, say N.
617
618config PATA_SCC
619	tristate "Toshiba's Cell Reference Set IDE support"
620	depends on PCI && PPC_CELLEB
621	help
622	  This option enables support for the built-in IDE controller on
623	  Toshiba Cell Reference Board.
624
625	  If unsure, say N.
626
627config PATA_SCH
628	tristate "Intel SCH PATA support"
629	depends on PCI
630	help
631	  This option enables support for Intel SCH PATA on the Intel
632	  SCH (US15W, US15L, UL11L) series host controllers.
633
634	  If unsure, say N.
635
636config PATA_SERVERWORKS
637	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
638	depends on PCI
639	help
640	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
641	  HT1000 PATA controllers, via the new ATA layer.
642
643	  If unsure, say N.
644
645config PATA_SIL680
646	tristate "CMD / Silicon Image 680 PATA support"
647	depends on PCI
648	help
649	  This option enables support for CMD / Silicon Image 680 PATA.
650
651	  If unsure, say N.
652
653config PATA_SIS
654	tristate "SiS PATA support"
655	depends on PCI
656	help
657	  This option enables support for SiS PATA controllers
658
659	  If unsure, say N.
660
661config PATA_TOSHIBA
662	tristate "Toshiba Piccolo support (Experimental)"
663	depends on PCI && EXPERIMENTAL
664	help
665	  Support for the Toshiba Piccolo controllers. Currently only the
666	  primary channel is supported by this driver.
667
668	  If unsure, say N.
669
670config PATA_TRIFLEX
671	tristate "Compaq Triflex PATA support"
672	depends on PCI
673	help
674	  Enable support for the Compaq 'Triflex' IDE controller as found
675	  on many Compaq Pentium-Pro systems, via the new ATA layer.
676
677	  If unsure, say N.
678
679config PATA_VIA
680	tristate "VIA PATA support"
681	depends on PCI
682	help
683	  This option enables support for the VIA PATA interfaces
684	  found on the many VIA chipsets.
685
686	  If unsure, say N.
687
688config PATA_PXA
689	tristate "PXA DMA-capable PATA support"
690	depends on ARCH_PXA
691	help
692	  This option enables support for harddrive attached to PXA CPU's bus.
693
694	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
695	        is not capable of doing MWDMA, use pata_platform instead.
696
697	  If unsure, say N.
698
699config PATA_WINBOND
700	tristate "Winbond SL82C105 PATA support"
701	depends on PCI
702	help
703	  This option enables support for SL82C105 PATA devices found in the
704	  Netwinder and some other systems
705
706	  If unsure, say N.
707
708endif # ATA_BMDMA
709
710comment "PIO-only SFF controllers"
711
712config PATA_AT32
713	tristate "Atmel AVR32 PATA support (Experimental)"
714	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
715	help
716	  This option enables support for the IDE devices on the
717	  Atmel AT32AP platform.
718
719	  If unsure, say N.
720
721config PATA_AT91
722	tristate "PATA support for AT91SAM9260"
723	depends on ARM && ARCH_AT91
724	help
725	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
726
727	  If unsure, say N.
728
729config PATA_CMD640_PCI
730	tristate "CMD640 PCI PATA support (Experimental)"
731	depends on PCI && EXPERIMENTAL
732	help
733	  This option enables support for the CMD640 PCI IDE
734	  interface chip. Only the primary channel is currently
735	  supported.
736
737	  If unsure, say N.
738
739config PATA_ISAPNP
740	tristate "ISA Plug and Play PATA support"
741	depends on ISAPNP
742	help
743	  This option enables support for ISA plug & play ATA
744	  controllers such as those found on old soundcards.
745
746	  If unsure, say N.
747
748config PATA_IXP4XX_CF
749	tristate "IXP4XX Compact Flash support"
750	depends on ARCH_IXP4XX
751	help
752	  This option enables support for a Compact Flash connected on
753	  the ixp4xx expansion bus. This driver had been written for
754	  Loft/Avila boards in mind but can work with others.
755
756	  If unsure, say N.
757
758config PATA_MPIIX
759	tristate "Intel PATA MPIIX support"
760	depends on PCI
761	help
762	  This option enables support for MPIIX PATA support.
763
764	  If unsure, say N.
765
766config PATA_NS87410
767	tristate "Nat Semi NS87410 PATA support"
768	depends on PCI
769	help
770	  This option enables support for the National Semiconductor
771	  NS87410 PCI-IDE controller.
772
773	  If unsure, say N.
774
775config PATA_OPTI
776	tristate "OPTI621/6215 PATA support (Very Experimental)"
777	depends on PCI && EXPERIMENTAL
778	help
779	  This option enables full PIO support for the early Opti ATA
780	  controllers found on some old motherboards.
781
782	  If unsure, say N.
783
784config PATA_PALMLD
785	tristate "Palm LifeDrive PATA support"
786	depends on MACH_PALMLD
787	help
788	  This option enables support for Palm LifeDrive's internal ATA
789	  port via the new ATA layer.
790
791	  If unsure, say N.
792
793config PATA_PCMCIA
794	tristate "PCMCIA PATA support"
795	depends on PCMCIA
796	help
797	  This option enables support for PCMCIA ATA interfaces, including
798	  compact flash card adapters via the new ATA layer.
799
800	  If unsure, say N.
801
802config PATA_PLATFORM
803	tristate "Generic platform device PATA support"
804	depends on EXPERT || PPC || HAVE_PATA_PLATFORM
805	help
806	  This option enables support for generic directly connected ATA
807	  devices commonly found on embedded systems.
808
809	  If unsure, say N.
810
811config PATA_OF_PLATFORM
812	tristate "OpenFirmware platform device PATA support"
813	depends on PATA_PLATFORM && PPC_OF
814	help
815	  This option enables support for generic directly connected ATA
816	  devices commonly found on embedded systems with OpenFirmware
817	  bindings.
818
819	  If unsure, say N.
820
821config PATA_QDI
822	tristate "QDI VLB PATA support"
823	depends on ISA
824	help
825	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
826
827config PATA_RB532
828	tristate "RouterBoard 532 PATA CompactFlash support"
829	depends on MIKROTIK_RB532
830	help
831	  This option enables support for the RouterBoard 532
832	  PATA CompactFlash controller.
833
834	  If unsure, say N.
835
836config PATA_RZ1000
837	tristate "PC Tech RZ1000 PATA support"
838	depends on PCI
839	help
840	  This option enables basic support for the PC Tech RZ1000/1
841	  PATA controllers via the new ATA layer
842
843	  If unsure, say N.
844
845config PATA_SAMSUNG_CF
846	tristate "Samsung SoC PATA support"
847	depends on SAMSUNG_DEV_IDE
848	help
849	  This option enables basic support for Samsung's S3C/S5P board
850	  PATA controllers via the new ATA layer
851
852	  If unsure, say N.
853
854config PATA_WINBOND_VLB
855	tristate "Winbond W83759A VLB PATA support (Experimental)"
856	depends on ISA && EXPERIMENTAL
857	select PATA_LEGACY
858	help
859	  Support for the Winbond W83759A controller on Vesa Local Bus
860	  systems.
861
862comment "Generic fallback / legacy drivers"
863
864config PATA_ACPI
865	tristate "ACPI firmware driver for PATA"
866	depends on ATA_ACPI && ATA_BMDMA
867	help
868	  This option enables an ACPI method driver which drives
869	  motherboard PATA controller interfaces through the ACPI
870	  firmware in the BIOS. This driver can sometimes handle
871	  otherwise unsupported hardware.
872
873config ATA_GENERIC
874	tristate "Generic ATA support"
875	depends on PCI && ATA_BMDMA
876	help
877	  This option enables support for generic BIOS configured
878	  ATA controllers via the new ATA layer
879
880	  If unsure, say N.
881
882config PATA_LEGACY
883	tristate "Legacy ISA PATA support (Experimental)"
884	depends on (ISA || PCI) && EXPERIMENTAL
885	help
886	  This option enables support for ISA/VLB/PCI bus legacy PATA
887	  ports and allows them to be accessed via the new ATA layer.
888
889	  If unsure, say N.
890
891endif # ATA_SFF
892endif # ATA
893