1# 2# Intel 82596/82593/82596 network device configuration 3# 4 5config NET_VENDOR_I825XX 6 bool "Intel (82586/82593/82596) devices" 7 default y 8 depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \ 9 ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ 10 GSC || BVME6000 || MVME16x || EXPERIMENTAL) 11 ---help--- 12 If you have a network (Ethernet) card belonging to this class, say Y 13 and read the Ethernet-HOWTO, available from 14 <http://www.tldp.org/docs.html#howto>. 15 16 Note that the answer to this question does not directly affect the 17 kernel: saying N will just cause the configurator to skip all 18 the questions about these devices. If you say Y, you will be asked for 19 your specific card in the following questions. 20 21if NET_VENDOR_I825XX 22 23config ELPLUS 24 tristate "3c505 \"EtherLink Plus\" support" 25 depends on ISA && ISA_DMA_API 26 ---help--- 27 Information about this network (Ethernet) card can be found in 28 <file:Documentation/networking/3c505.txt>. If you have a card of 29 this type, say Y and read the Ethernet-HOWTO, available from 30 <http://www.tldp.org/docs.html#howto>. 31 32 To compile this driver as a module, choose M here. The module 33 will be called 3c505. 34 35config EL16 36 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" 37 depends on ISA && EXPERIMENTAL 38 ---help--- 39 If you have a network (Ethernet) card of this type, say Y and read 40 the Ethernet-HOWTO, available from 41 <http://www.tldp.org/docs.html#howto>. 42 43 To compile this driver as a module, choose M here. The module 44 will be called 3c507. 45 46config ELMC 47 tristate "3c523 \"EtherLink/MC\" support" 48 depends on MCA_LEGACY 49 ---help--- 50 If you have a network (Ethernet) card of this type, say Y and read 51 the Ethernet-HOWTO, available from 52 <http://www.tldp.org/docs.html#howto>. 53 54 To compile this driver as a module, choose M here. The module 55 will be called 3c523. 56 57config ELMC_II 58 tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" 59 depends on MCA && MCA_LEGACY 60 ---help--- 61 If you have a network (Ethernet) card of this type, say Y and read 62 the Ethernet-HOWTO, available from 63 <http://www.tldp.org/docs.html#howto>. 64 65 To compile this driver as a module, choose M here. The module 66 will be called 3c527. 67 68config ARM_ETHER1 69 tristate "Acorn Ether1 support" 70 depends on ARM && ARCH_ACORN 71 ---help--- 72 If you have an Acorn system with one of these (AKA25) network cards, 73 you should say Y to this option if you wish to use it with Linux. 74 75config APRICOT 76 tristate "Apricot Xen-II on board Ethernet" 77 depends on ISA 78 ---help--- 79 If you have a network (Ethernet) controller of this type, say Y and 80 read the Ethernet-HOWTO, available from 81 <http://www.tldp.org/docs.html#howto>. 82 83 To compile this driver as a module, choose M here. The module 84 will be called apricot. 85 86config BVME6000_NET 87 tristate "BVME6000 Ethernet support" 88 depends on BVME6000 89 ---help--- 90 This is the driver for the Ethernet interface on BVME4000 and 91 BVME6000 VME boards. Say Y here to include the driver for this chip 92 in your kernel. 93 To compile this driver as a module, choose M here. 94 95config EEXPRESS 96 tristate "EtherExpress 16 support" 97 depends on ISA 98 ---help--- 99 If you have an EtherExpress16 network (Ethernet) card, say Y and 100 read the Ethernet-HOWTO, available from 101 <http://www.tldp.org/docs.html#howto>. Note that the Intel 102 EtherExpress16 card used to be regarded as a very poor choice 103 because the driver was very unreliable. We now have a new driver 104 that should do better. 105 106 To compile this driver as a module, choose M here. The module 107 will be called eexpress. 108 109config EEXPRESS_PRO 110 tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" 111 depends on ISA 112 ---help--- 113 If you have a network (Ethernet) card of this type, say Y. This 114 driver supports Intel i82595{FX,TX} based boards. Note however 115 that the EtherExpress PRO/100 Ethernet card has its own separate 116 driver. Please read the Ethernet-HOWTO, available from 117 <http://www.tldp.org/docs.html#howto>. 118 119 To compile this driver as a module, choose M here. The module 120 will be called eepro. 121 122config LASI_82596 123 tristate "Lasi ethernet" 124 depends on GSC 125 ---help--- 126 Say Y here to support the builtin Intel 82596 ethernet controller 127 found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. 128 129config LP486E 130 tristate "LP486E on board Ethernet" 131 depends on ISA 132 ---help--- 133 Say Y here to support the 82596-based on-board Ethernet controller 134 for the Panther motherboard, which is one of the two shipped in the 135 Intel Professional Workstation. 136 137config MVME16x_NET 138 tristate "MVME16x Ethernet support" 139 depends on MVME16x 140 ---help--- 141 This is the driver for the Ethernet interface on the Motorola 142 MVME162, 166, 167, 172 and 177 boards. Say Y here to include the 143 driver for this chip in your kernel. 144 To compile this driver as a module, choose M here. 145 146config NI52 147 tristate "NI5210 support" 148 depends on ISA 149 ---help--- 150 If you have a network (Ethernet) card of this type, say Y and read 151 the Ethernet-HOWTO, available from 152 <http://www.tldp.org/docs.html#howto>. 153 154 To compile this driver as a module, choose M here. The module 155 will be called ni52. 156 157config SNI_82596 158 tristate "SNI RM ethernet" 159 depends on SNI_RM 160 ---help--- 161 Say Y here to support the on-board Intel 82596 ethernet controller 162 built into SNI RM machines. 163 164config SUN3_82586 165 bool "Sun3 on-board Intel 82586 support" 166 depends on SUN3 167 ---help--- 168 This driver enables support for the on-board Intel 82586 based 169 Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note 170 that this driver does not support 82586-based adapters on additional 171 VME boards. 172 173config ZNET 174 tristate "Zenith Z-Note support (EXPERIMENTAL)" 175 depends on EXPERIMENTAL && ISA_DMA_API 176 ---help--- 177 The Zenith Z-Note notebook computer has a built-in network 178 (Ethernet) card, and this is the Linux driver for it. Note that the 179 IBM Thinkpad 300 is compatible with the Z-Note and is also supported 180 by this driver. Read the Ethernet-HOWTO, available from 181 <http://www.tldp.org/docs.html#howto>. 182 183endif # NET_VENDOR_I825XX 184