1menu "RealView platform type"
2	depends on ARCH_REALVIEW
3
4config MACH_REALVIEW_EB
5	bool "Support RealView(R) Emulation Baseboard"
6	select ARM_GIC
7	help
8	  Include support for the ARM(R) RealView(R) Emulation Baseboard
9	  platform.
10
11config REALVIEW_EB_A9MP
12	bool "Support Multicore Cortex-A9 Tile"
13	depends on MACH_REALVIEW_EB
14	select CPU_V7
15	select HAVE_SMP
16	select MIGHT_HAVE_CACHE_L2X0
17	help
18	  Enable support for the Cortex-A9MPCore tile fitted to the
19	  Realview(R) Emulation Baseboard platform.
20
21config REALVIEW_EB_ARM11MP
22	bool "Support ARM11MPCore Tile"
23	depends on MACH_REALVIEW_EB
24	select CPU_V6K
25	select ARCH_HAS_BARRIERS if SMP
26	select HAVE_SMP
27	select MIGHT_HAVE_CACHE_L2X0
28	help
29	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
30	  Emulation Baseboard platform.
31
32config REALVIEW_EB_ARM11MP_REVB
33	bool "Support ARM11MPCore RevB Tile"
34	depends on REALVIEW_EB_ARM11MP
35	help
36	  Enable support for the ARM11MPCore Revision B tile on the
37	  Realview(R) Emulation Baseboard platform. Since there are device
38	  address differences, a kernel built with this option enabled is
39	  not compatible with other revisions of the ARM11MPCore tile.
40
41config MACH_REALVIEW_PB11MP
42	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
43	select CPU_V6K
44	select ARM_GIC
45	select HAVE_PATA_PLATFORM
46	select HAVE_SMP
47	select MIGHT_HAVE_CACHE_L2X0
48	select ARCH_HAS_BARRIERS if SMP
49	help
50	  Include support for the ARM(R) RealView(R) Platform Baseboard for
51	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
52	  support for PCI-E and Compact Flash.
53
54# ARMv6 CPU without K extensions, but does have the new exclusive ops
55config MACH_REALVIEW_PB1176
56	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
57	select CPU_V6
58	select ARM_GIC
59	select HAVE_TCM
60	select MIGHT_HAVE_CACHE_L2X0
61	help
62	  Include support for the ARM(R) RealView(R) Platform Baseboard for
63	  ARM1176JZF-S.
64
65config REALVIEW_PB1176_SECURE_FLASH
66	bool "Allow access to the secure flash memory block"
67	depends on MACH_REALVIEW_PB1176
68	default n
69	help
70	  Select this option if Linux will only run in secure mode on the
71	  RealView PB1176 platform and access to the secure flash memory
72	  block (64MB @ 0x3c000000) is required.
73
74config MACH_REALVIEW_PBA8
75	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
76	select CPU_V7
77	select ARM_GIC
78	select HAVE_PATA_PLATFORM
79	help
80	  Include support for the ARM(R) RealView Platform Baseboard for
81	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
82	  support for PCI-E and Compact Flash.
83
84config MACH_REALVIEW_PBX
85	bool "Support RealView(R) Platform Baseboard Explore"
86	select ARM_GIC
87	select HAVE_PATA_PLATFORM
88	select HAVE_SMP
89	select MIGHT_HAVE_CACHE_L2X0
90	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
91	select ZONE_DMA if SPARSEMEM
92	help
93	  Include support for the ARM(R) RealView(R) Platform Baseboard
94	  Explore.
95
96config REALVIEW_HIGH_PHYS_OFFSET
97	bool "High physical base address for the RealView platform"
98	depends on MMU && !MACH_REALVIEW_PB1176
99	default y
100	help
101	  RealView boards other than PB1176 have the RAM available at
102	  0x70000000, 256MB of which being mirrored at 0x00000000. If
103	  the board supports 512MB of RAM, this option allows the
104	  memory to be accessed contiguously at the high physical
105	  offset. On the PBX board, disabling this option allows 1GB of
106	  RAM to be used with SPARSEMEM.
107
108endmenu
109