1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
10	select I2C
11	select I2C_ALGOBIT
12	select SLOW_WORK
13	help
14	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
15	  introduced in XFree86 4.0. If you say Y here, you need to select
16	  the module that's right for your graphics card from the list below.
17	  These modules provide support for synchronization, security, and
18	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
19	  details.  You should also select and configure AGP
20	  (/dev/agpgart) support if it is available for your platform.
21
22config DRM_KMS_HELPER
23	tristate
24	depends on DRM
25	select FB
26	select FRAMEBUFFER_CONSOLE if !EXPERT
27	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
28	help
29	  FB and CRTC helpers for KMS drivers.
30
31config DRM_TTM
32	tristate
33	depends on DRM
34	help
35	  GPU memory management subsystem for devices with multiple
36	  GPU memory types. Will be enabled automatically if a device driver
37	  uses it.
38
39config DRM_TDFX
40	tristate "3dfx Banshee/Voodoo3+"
41	depends on DRM && PCI
42	help
43	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
44	  graphics card.  If M is selected, the module will be called tdfx.
45
46config DRM_R128
47	tristate "ATI Rage 128"
48	depends on DRM && PCI
49	select FW_LOADER
50	help
51	  Choose this option if you have an ATI Rage 128 graphics card.  If M
52	  is selected, the module will be called r128.  AGP support for
53	  this card is strongly suggested (unless you have a PCI version).
54
55config DRM_RADEON
56	tristate "ATI Radeon"
57	depends on DRM && PCI
58	select FB_CFB_FILLRECT
59	select FB_CFB_COPYAREA
60	select FB_CFB_IMAGEBLIT
61	select FW_LOADER
62        select DRM_KMS_HELPER
63        select DRM_TTM
64	select POWER_SUPPLY
65	select HWMON
66	help
67	  Choose this option if you have an ATI Radeon graphics card.  There
68	  are both PCI and AGP versions.  You don't need to choose this to
69	  run the Radeon in plain VGA mode.
70
71	  If M is selected, the module will be called radeon.
72
73source "drivers/gpu/drm/radeon/Kconfig"
74
75config DRM_I810
76	tristate "Intel I810"
77	# !PREEMPT because of missing ioctl locking
78	depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
79	help
80	  Choose this option if you have an Intel I810 graphics card.  If M is
81	  selected, the module will be called i810.  AGP support is required
82	  for this driver to work.
83
84config DRM_I915
85	tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
86	depends on DRM
87	depends on AGP
88	depends on AGP_INTEL
89	# we need shmfs for the swappable backing store, and in particular
90	# the shmem_readpage() which depends upon tmpfs
91	select SHMEM
92	select TMPFS
93	select DRM_KMS_HELPER
94	select FB_CFB_FILLRECT
95	select FB_CFB_COPYAREA
96	select FB_CFB_IMAGEBLIT
97	# i915 depends on ACPI_VIDEO when ACPI is enabled
98	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
99	select BACKLIGHT_CLASS_DEVICE if ACPI
100	select VIDEO_OUTPUT_CONTROL if ACPI
101	select INPUT if ACPI
102	select ACPI_VIDEO if ACPI
103	select ACPI_BUTTON if ACPI
104	help
105	  Choose this option if you have a system that has "Intel Graphics
106	  Media Accelerator" or "HD Graphics" integrated graphics,
107	  including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
108	  G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
109	  Core i5, Core i7 as well as Atom CPUs with integrated graphics.
110	  If M is selected, the module will be called i915.  AGP support
111	  is required for this driver to work. This driver is used by
112	  the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
113	  replaces the older i830 module that supported a subset of the
114	  hardware in older X.org releases.
115
116	  Note that the older i810/i815 chipsets require the use of the
117	  i810 driver instead, and the Atom z5xx series has an entirely
118	  different implementation.
119
120config DRM_I915_KMS
121	bool "Enable modesetting on intel by default"
122	depends on DRM_I915
123	help
124	  Choose this option if you want kernel modesetting enabled by default,
125	  and you have a new enough userspace to support this. Running old
126	  userspaces with this enabled will cause pain.  Note that this causes
127	  the driver to bind to PCI devices, which precludes loading things
128	  like intelfb.
129
130config DRM_MGA
131	tristate "Matrox g200/g400"
132	depends on DRM && PCI
133	select FW_LOADER
134	help
135	  Choose this option if you have a Matrox G200, G400 or G450 graphics
136	  card.  If M is selected, the module will be called mga.  AGP
137	  support is required for this driver to work.
138
139config DRM_SIS
140	tristate "SiS video cards"
141	depends on DRM && AGP
142	depends on FB_SIS || FB_SIS=n
143	help
144	  Choose this option if you have a SiS 630 or compatible video
145          chipset. If M is selected the module will be called sis. AGP
146          support is required for this driver to work.
147
148config DRM_VIA
149	tristate "Via unichrome video cards"
150	depends on DRM && PCI
151	help
152	  Choose this option if you have a Via unichrome or compatible video
153	  chipset. If M is selected the module will be called via.
154
155config DRM_SAVAGE
156	tristate "Savage video cards"
157	depends on DRM && PCI
158	help
159	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
160	  chipset. If M is selected the module will be called savage.
161