1# SPDX-License-Identifier: GPL-2.0
2config MIPS
3	bool
4	default y
5	select ARCH_32BIT_OFF_T if !64BIT
6	select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
7	select ARCH_HAS_CPU_FINALIZE_INIT
8	select ARCH_HAS_CURRENT_STACK_POINTER if !CC_IS_CLANG || CLANG_VERSION >= 140000
9	select ARCH_HAS_DEBUG_VIRTUAL if !64BIT
10	select ARCH_HAS_FORTIFY_SOURCE
11	select ARCH_HAS_KCOV
12	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA
13	select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
14	select ARCH_HAS_STRNCPY_FROM_USER
15	select ARCH_HAS_STRNLEN_USER
16	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
17	select ARCH_HAS_UBSAN_SANITIZE_ALL
18	select ARCH_HAS_GCOV_PROFILE_ALL
19	select ARCH_KEEP_MEMBLOCK
20	select ARCH_USE_BUILTIN_BSWAP
21	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
22	select ARCH_USE_MEMTEST
23	select ARCH_USE_QUEUED_RWLOCKS
24	select ARCH_USE_QUEUED_SPINLOCKS
25	select ARCH_SUPPORTS_HUGETLBFS if CPU_SUPPORTS_HUGEPAGES
26	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
27	select ARCH_WANT_IPC_PARSE_VERSION
28	select ARCH_WANT_LD_ORPHAN_WARN
29	select BUILDTIME_TABLE_SORT
30	select CLONE_BACKWARDS
31	select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
32	select CPU_PM if CPU_IDLE
33	select GENERIC_ATOMIC64 if !64BIT
34	select GENERIC_CMOS_UPDATE
35	select GENERIC_CPU_AUTOPROBE
36	select GENERIC_GETTIMEOFDAY
37	select GENERIC_IOMAP
38	select GENERIC_IRQ_PROBE
39	select GENERIC_IRQ_SHOW
40	select GENERIC_ISA_DMA if EISA
41	select GENERIC_LIB_ASHLDI3
42	select GENERIC_LIB_ASHRDI3
43	select GENERIC_LIB_CMPDI2
44	select GENERIC_LIB_LSHRDI3
45	select GENERIC_LIB_UCMPDI2
46	select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
47	select GENERIC_SMP_IDLE_THREAD
48	select GENERIC_IDLE_POLL_SETUP
49	select GENERIC_TIME_VSYSCALL
50	select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT
51	select HAS_IOPORT if !NO_IOPORT_MAP || ISA
52	select HAVE_ARCH_COMPILER_H
53	select HAVE_ARCH_JUMP_LABEL
54	select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT
55	select HAVE_ARCH_MMAP_RND_BITS if MMU
56	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
57	select HAVE_ARCH_SECCOMP_FILTER
58	select HAVE_ARCH_TRACEHOOK
59	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
60	select HAVE_ASM_MODVERSIONS
61	select HAVE_CONTEXT_TRACKING_USER
62	select HAVE_TIF_NOHZ
63	select HAVE_C_RECORDMCOUNT
64	select HAVE_DEBUG_KMEMLEAK
65	select HAVE_DEBUG_STACKOVERFLOW
66	select HAVE_DMA_CONTIGUOUS
67	select HAVE_DYNAMIC_FTRACE
68	select HAVE_EBPF_JIT if !CPU_MICROMIPS
69	select HAVE_EXIT_THREAD
70	select HAVE_FAST_GUP
71	select HAVE_FTRACE_MCOUNT_RECORD
72	select HAVE_FUNCTION_GRAPH_TRACER
73	select HAVE_FUNCTION_TRACER
74	select HAVE_GCC_PLUGINS
75	select HAVE_GENERIC_VDSO
76	select HAVE_IOREMAP_PROT
77	select HAVE_IRQ_EXIT_ON_IRQ_STACK
78	select HAVE_IRQ_TIME_ACCOUNTING
79	select HAVE_KPROBES
80	select HAVE_KRETPROBES
81	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
82	select HAVE_MOD_ARCH_SPECIFIC
83	select HAVE_NMI
84	select HAVE_PERF_EVENTS
85	select HAVE_PERF_REGS
86	select HAVE_PERF_USER_STACK_DUMP
87	select HAVE_REGS_AND_STACK_ACCESS_API
88	select HAVE_RSEQ
89	select HAVE_SPARSE_SYSCALL_NR
90	select HAVE_STACKPROTECTOR
91	select HAVE_SYSCALL_TRACEPOINTS
92	select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
93	select IRQ_FORCED_THREADING
94	select ISA if EISA
95	select LOCK_MM_AND_FIND_VMA
96	select MODULES_USE_ELF_REL if MODULES
97	select MODULES_USE_ELF_RELA if MODULES && 64BIT
98	select PERF_USE_VMALLOC
99	select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
100	select RTC_LIB
101	select SYSCTL_EXCEPTION_TRACE
102	select TRACE_IRQFLAGS_SUPPORT
103	select ARCH_HAS_ELFCORE_COMPAT
104	select HAVE_ARCH_KCSAN if 64BIT
105
106config MIPS_FIXUP_BIGPHYS_ADDR
107	bool
108
109config MIPS_GENERIC
110	bool
111
112config MACH_INGENIC
113	bool
114	select SYS_SUPPORTS_32BIT_KERNEL
115	select SYS_SUPPORTS_LITTLE_ENDIAN
116	select SYS_SUPPORTS_ZBOOT
117	select DMA_NONCOHERENT
118	select IRQ_MIPS_CPU
119	select PINCTRL
120	select GPIOLIB
121	select COMMON_CLK
122	select GENERIC_IRQ_CHIP
123	select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
124	select USE_OF
125	select CPU_SUPPORTS_CPUFREQ
126	select MIPS_EXTERNAL_TIMER
127
128menu "Machine selection"
129
130choice
131	prompt "System type"
132	default MIPS_GENERIC_KERNEL
133
134config MIPS_GENERIC_KERNEL
135	bool "Generic board-agnostic MIPS kernel"
136	select MIPS_GENERIC
137	select BOOT_RAW
138	select BUILTIN_DTB
139	select CEVT_R4K
140	select CLKSRC_MIPS_GIC
141	select COMMON_CLK
142	select CPU_MIPSR2_IRQ_EI
143	select CPU_MIPSR2_IRQ_VI
144	select CSRC_R4K
145	select DMA_NONCOHERENT
146	select HAVE_PCI
147	select IRQ_MIPS_CPU
148	select MIPS_AUTO_PFN_OFFSET
149	select MIPS_CPU_SCACHE
150	select MIPS_GIC
151	select MIPS_L1_CACHE_SHIFT_7
152	select NO_EXCEPT_FILL
153	select PCI_DRIVERS_GENERIC
154	select SMP_UP if SMP
155	select SWAP_IO_SPACE
156	select SYS_HAS_CPU_MIPS32_R1
157	select SYS_HAS_CPU_MIPS32_R2
158	select SYS_HAS_CPU_MIPS32_R5
159	select SYS_HAS_CPU_MIPS32_R6
160	select SYS_HAS_CPU_MIPS64_R1
161	select SYS_HAS_CPU_MIPS64_R2
162	select SYS_HAS_CPU_MIPS64_R5
163	select SYS_HAS_CPU_MIPS64_R6
164	select SYS_SUPPORTS_32BIT_KERNEL
165	select SYS_SUPPORTS_64BIT_KERNEL
166	select SYS_SUPPORTS_BIG_ENDIAN
167	select SYS_SUPPORTS_HIGHMEM
168	select SYS_SUPPORTS_LITTLE_ENDIAN
169	select SYS_SUPPORTS_MICROMIPS
170	select SYS_SUPPORTS_MIPS16
171	select SYS_SUPPORTS_MIPS_CPS
172	select SYS_SUPPORTS_MULTITHREADING
173	select SYS_SUPPORTS_RELOCATABLE
174	select SYS_SUPPORTS_SMARTMIPS
175	select SYS_SUPPORTS_ZBOOT
176	select UHI_BOOT
177	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
178	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
179	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
180	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
181	select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
182	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
183	select USE_OF
184	help
185	  Select this to build a kernel which aims to support multiple boards,
186	  generally using a flattened device tree passed from the bootloader
187	  using the boot protocol defined in the UHI (Unified Hosting
188	  Interface) specification.
189
190config MIPS_ALCHEMY
191	bool "Alchemy processor based machines"
192	select PHYS_ADDR_T_64BIT
193	select CEVT_R4K
194	select CSRC_R4K
195	select IRQ_MIPS_CPU
196	select DMA_NONCOHERENT		# Au1000,1500,1100 aren't, rest is
197	select MIPS_FIXUP_BIGPHYS_ADDR if PCI
198	select SYS_HAS_CPU_MIPS32_R1
199	select SYS_SUPPORTS_32BIT_KERNEL
200	select SYS_SUPPORTS_APM_EMULATION
201	select GPIOLIB
202	select SYS_SUPPORTS_ZBOOT
203	select COMMON_CLK
204
205config AR7
206	bool "Texas Instruments AR7"
207	select BOOT_ELF32
208	select COMMON_CLK
209	select DMA_NONCOHERENT
210	select CEVT_R4K
211	select CSRC_R4K
212	select IRQ_MIPS_CPU
213	select NO_EXCEPT_FILL
214	select SWAP_IO_SPACE
215	select SYS_HAS_CPU_MIPS32_R1
216	select SYS_HAS_EARLY_PRINTK
217	select SYS_SUPPORTS_32BIT_KERNEL
218	select SYS_SUPPORTS_LITTLE_ENDIAN
219	select SYS_SUPPORTS_MIPS16
220	select SYS_SUPPORTS_ZBOOT_UART16550
221	select GPIOLIB
222	select VLYNQ
223	help
224	  Support for the Texas Instruments AR7 System-on-a-Chip
225	  family: TNETD7100, 7200 and 7300.
226
227config ATH25
228	bool "Atheros AR231x/AR531x SoC support"
229	select CEVT_R4K
230	select CSRC_R4K
231	select DMA_NONCOHERENT
232	select IRQ_MIPS_CPU
233	select IRQ_DOMAIN
234	select SYS_HAS_CPU_MIPS32_R1
235	select SYS_SUPPORTS_BIG_ENDIAN
236	select SYS_SUPPORTS_32BIT_KERNEL
237	select SYS_HAS_EARLY_PRINTK
238	help
239	  Support for Atheros AR231x and Atheros AR531x based boards
240
241config ATH79
242	bool "Atheros AR71XX/AR724X/AR913X based boards"
243	select ARCH_HAS_RESET_CONTROLLER
244	select BOOT_RAW
245	select CEVT_R4K
246	select CSRC_R4K
247	select DMA_NONCOHERENT
248	select GPIOLIB
249	select PINCTRL
250	select COMMON_CLK
251	select IRQ_MIPS_CPU
252	select SYS_HAS_CPU_MIPS32_R2
253	select SYS_HAS_EARLY_PRINTK
254	select SYS_SUPPORTS_32BIT_KERNEL
255	select SYS_SUPPORTS_BIG_ENDIAN
256	select SYS_SUPPORTS_MIPS16
257	select SYS_SUPPORTS_ZBOOT_UART_PROM
258	select USE_OF
259	select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
260	help
261	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
262
263config BMIPS_GENERIC
264	bool "Broadcom Generic BMIPS kernel"
265	select ARCH_HAS_RESET_CONTROLLER
266	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
267	select BOOT_RAW
268	select NO_EXCEPT_FILL
269	select USE_OF
270	select CEVT_R4K
271	select CSRC_R4K
272	select SYNC_R4K
273	select COMMON_CLK
274	select BCM6345_L1_IRQ
275	select BCM7038_L1_IRQ
276	select BCM7120_L2_IRQ
277	select BRCMSTB_L2_IRQ
278	select IRQ_MIPS_CPU
279	select DMA_NONCOHERENT
280	select SYS_SUPPORTS_32BIT_KERNEL
281	select SYS_SUPPORTS_LITTLE_ENDIAN
282	select SYS_SUPPORTS_BIG_ENDIAN
283	select SYS_SUPPORTS_HIGHMEM
284	select SYS_HAS_CPU_BMIPS32_3300
285	select SYS_HAS_CPU_BMIPS4350
286	select SYS_HAS_CPU_BMIPS4380
287	select SYS_HAS_CPU_BMIPS5000
288	select SWAP_IO_SPACE
289	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
290	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
291	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
292	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
293	select HARDIRQS_SW_RESEND
294	select HAVE_PCI
295	select PCI_DRIVERS_GENERIC
296	select FW_CFE
297	help
298	  Build a generic DT-based kernel image that boots on select
299	  BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
300	  box chips.  Note that CONFIG_CPU_BIG_ENDIAN/CONFIG_CPU_LITTLE_ENDIAN
301	  must be set appropriately for your board.
302
303config BCM47XX
304	bool "Broadcom BCM47XX based boards"
305	select BOOT_RAW
306	select CEVT_R4K
307	select CSRC_R4K
308	select DMA_NONCOHERENT
309	select HAVE_PCI
310	select IRQ_MIPS_CPU
311	select SYS_HAS_CPU_MIPS32_R1
312	select NO_EXCEPT_FILL
313	select SYS_SUPPORTS_32BIT_KERNEL
314	select SYS_SUPPORTS_LITTLE_ENDIAN
315	select SYS_SUPPORTS_MIPS16
316	select SYS_SUPPORTS_ZBOOT
317	select SYS_HAS_EARLY_PRINTK
318	select USE_GENERIC_EARLY_PRINTK_8250
319	select GPIOLIB
320	select LEDS_GPIO_REGISTER
321	select BCM47XX_NVRAM
322	select BCM47XX_SPROM
323	select BCM47XX_SSB if !BCM47XX_BCMA
324	help
325	  Support for BCM47XX based boards
326
327config BCM63XX
328	bool "Broadcom BCM63XX based boards"
329	select BOOT_RAW
330	select CEVT_R4K
331	select CSRC_R4K
332	select SYNC_R4K
333	select DMA_NONCOHERENT
334	select IRQ_MIPS_CPU
335	select SYS_SUPPORTS_32BIT_KERNEL
336	select SYS_SUPPORTS_BIG_ENDIAN
337	select SYS_HAS_EARLY_PRINTK
338	select SYS_HAS_CPU_BMIPS32_3300
339	select SYS_HAS_CPU_BMIPS4350
340	select SYS_HAS_CPU_BMIPS4380
341	select SWAP_IO_SPACE
342	select GPIOLIB
343	select MIPS_L1_CACHE_SHIFT_4
344	select HAVE_LEGACY_CLK
345	help
346	  Support for BCM63XX based boards
347
348config MIPS_COBALT
349	bool "Cobalt Server"
350	select CEVT_R4K
351	select CSRC_R4K
352	select CEVT_GT641XX
353	select DMA_NONCOHERENT
354	select FORCE_PCI
355	select I8253
356	select I8259
357	select IRQ_MIPS_CPU
358	select IRQ_GT641XX
359	select PCI_GT64XXX_PCI0
360	select SYS_HAS_CPU_NEVADA
361	select SYS_HAS_EARLY_PRINTK
362	select SYS_SUPPORTS_32BIT_KERNEL
363	select SYS_SUPPORTS_64BIT_KERNEL
364	select SYS_SUPPORTS_LITTLE_ENDIAN
365	select USE_GENERIC_EARLY_PRINTK_8250
366
367config MACH_DECSTATION
368	bool "DECstations"
369	select BOOT_ELF32
370	select CEVT_DS1287
371	select CEVT_R4K if CPU_R4X00
372	select CSRC_IOASIC
373	select CSRC_R4K if CPU_R4X00
374	select CPU_DADDI_WORKAROUNDS if 64BIT
375	select CPU_R4000_WORKAROUNDS if 64BIT
376	select CPU_R4400_WORKAROUNDS if 64BIT
377	select DMA_NONCOHERENT
378	select NO_IOPORT_MAP
379	select IRQ_MIPS_CPU
380	select SYS_HAS_CPU_R3000
381	select SYS_HAS_CPU_R4X00
382	select SYS_SUPPORTS_32BIT_KERNEL
383	select SYS_SUPPORTS_64BIT_KERNEL
384	select SYS_SUPPORTS_LITTLE_ENDIAN
385	select SYS_SUPPORTS_128HZ
386	select SYS_SUPPORTS_256HZ
387	select SYS_SUPPORTS_1024HZ
388	select MIPS_L1_CACHE_SHIFT_4
389	help
390	  This enables support for DEC's MIPS based workstations.  For details
391	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
392	  DECstation porting pages on <http://decstation.unix-ag.org/>.
393
394	  If you have one of the following DECstation Models you definitely
395	  want to choose R4xx0 for the CPU Type:
396
397		DECstation 5000/50
398		DECstation 5000/150
399		DECstation 5000/260
400		DECsystem 5900/260
401
402	  otherwise choose R3000.
403
404config MACH_JAZZ
405	bool "Jazz family of machines"
406	select ARC_MEMORY
407	select ARC_PROMLIB
408	select ARCH_MIGHT_HAVE_PC_PARPORT
409	select ARCH_MIGHT_HAVE_PC_SERIO
410	select DMA_OPS
411	select FW_ARC
412	select FW_ARC32
413	select ARCH_MAY_HAVE_PC_FDC
414	select CEVT_R4K
415	select CSRC_R4K
416	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
417	select GENERIC_ISA_DMA
418	select HAVE_PCSPKR_PLATFORM
419	select IRQ_MIPS_CPU
420	select I8253
421	select I8259
422	select ISA
423	select SYS_HAS_CPU_R4X00
424	select SYS_SUPPORTS_32BIT_KERNEL
425	select SYS_SUPPORTS_64BIT_KERNEL
426	select SYS_SUPPORTS_100HZ
427	select SYS_SUPPORTS_LITTLE_ENDIAN
428	help
429	  This a family of machines based on the MIPS R4030 chipset which was
430	  used by several vendors to build RISC/os and Windows NT workstations.
431	  Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
432	  Olivetti M700-10 workstations.
433
434config MACH_INGENIC_SOC
435	bool "Ingenic SoC based machines"
436	select MIPS_GENERIC
437	select MACH_INGENIC
438	select SYS_SUPPORTS_ZBOOT_UART16550
439	select CPU_SUPPORTS_CPUFREQ
440	select MIPS_EXTERNAL_TIMER
441
442config LANTIQ
443	bool "Lantiq based platforms"
444	select DMA_NONCOHERENT
445	select IRQ_MIPS_CPU
446	select CEVT_R4K
447	select CSRC_R4K
448	select NO_EXCEPT_FILL
449	select SYS_HAS_CPU_MIPS32_R1
450	select SYS_HAS_CPU_MIPS32_R2
451	select SYS_SUPPORTS_BIG_ENDIAN
452	select SYS_SUPPORTS_32BIT_KERNEL
453	select SYS_SUPPORTS_MIPS16
454	select SYS_SUPPORTS_MULTITHREADING
455	select SYS_SUPPORTS_VPE_LOADER
456	select SYS_HAS_EARLY_PRINTK
457	select GPIOLIB
458	select SWAP_IO_SPACE
459	select BOOT_RAW
460	select HAVE_LEGACY_CLK
461	select USE_OF
462	select PINCTRL
463	select PINCTRL_LANTIQ
464	select ARCH_HAS_RESET_CONTROLLER
465	select RESET_CONTROLLER
466
467config MACH_LOONGSON32
468	bool "Loongson 32-bit family of machines"
469	select SYS_SUPPORTS_ZBOOT
470	help
471	  This enables support for the Loongson-1 family of machines.
472
473	  Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by
474	  the Institute of Computing Technology (ICT), Chinese Academy of
475	  Sciences (CAS).
476
477config MACH_LOONGSON2EF
478	bool "Loongson-2E/F family of machines"
479	select SYS_SUPPORTS_ZBOOT
480	help
481	  This enables the support of early Loongson-2E/F family of machines.
482
483config MACH_LOONGSON64
484	bool "Loongson 64-bit family of machines"
485	select ARCH_DMA_DEFAULT_COHERENT
486	select ARCH_SPARSEMEM_ENABLE
487	select ARCH_MIGHT_HAVE_PC_PARPORT
488	select ARCH_MIGHT_HAVE_PC_SERIO
489	select GENERIC_ISA_DMA_SUPPORT_BROKEN
490	select BOOT_ELF32
491	select BOARD_SCACHE
492	select CSRC_R4K
493	select CEVT_R4K
494	select FORCE_PCI
495	select ISA
496	select I8259
497	select IRQ_MIPS_CPU
498	select NO_EXCEPT_FILL
499	select NR_CPUS_DEFAULT_64
500	select USE_GENERIC_EARLY_PRINTK_8250
501	select PCI_DRIVERS_GENERIC
502	select SYS_HAS_CPU_LOONGSON64
503	select SYS_HAS_EARLY_PRINTK
504	select SYS_SUPPORTS_SMP
505	select SYS_SUPPORTS_HOTPLUG_CPU
506	select SYS_SUPPORTS_NUMA
507	select SYS_SUPPORTS_64BIT_KERNEL
508	select SYS_SUPPORTS_HIGHMEM
509	select SYS_SUPPORTS_LITTLE_ENDIAN
510	select SYS_SUPPORTS_ZBOOT
511	select SYS_SUPPORTS_RELOCATABLE
512	select ZONE_DMA32
513	select COMMON_CLK
514	select USE_OF
515	select BUILTIN_DTB
516	select PCI_HOST_GENERIC
517	select HAVE_ARCH_NODEDATA_EXTENSION if NUMA
518	help
519	  This enables the support of Loongson-2/3 family of machines.
520
521	  Loongson-2 and Loongson-3 are 64-bit general-purpose processors with
522	  GS264/GS464/GS464E/GS464V microarchitecture (except old Loongson-2E
523	  and Loongson-2F which will be removed), developed by the Institute
524	  of Computing Technology (ICT), Chinese Academy of Sciences (CAS).
525
526config MIPS_MALTA
527	bool "MIPS Malta board"
528	select ARCH_MAY_HAVE_PC_FDC
529	select ARCH_MIGHT_HAVE_PC_PARPORT
530	select ARCH_MIGHT_HAVE_PC_SERIO
531	select BOOT_ELF32
532	select BOOT_RAW
533	select BUILTIN_DTB
534	select CEVT_R4K
535	select CLKSRC_MIPS_GIC
536	select COMMON_CLK
537	select CSRC_R4K
538	select DMA_NONCOHERENT
539	select GENERIC_ISA_DMA
540	select HAVE_PCSPKR_PLATFORM
541	select HAVE_PCI
542	select I8253
543	select I8259
544	select IRQ_MIPS_CPU
545	select MIPS_BONITO64
546	select MIPS_CPU_SCACHE
547	select MIPS_GIC
548	select MIPS_L1_CACHE_SHIFT_6
549	select MIPS_MSC
550	select PCI_GT64XXX_PCI0
551	select SMP_UP if SMP
552	select SWAP_IO_SPACE
553	select SYS_HAS_CPU_MIPS32_R1
554	select SYS_HAS_CPU_MIPS32_R2
555	select SYS_HAS_CPU_MIPS32_R3_5
556	select SYS_HAS_CPU_MIPS32_R5
557	select SYS_HAS_CPU_MIPS32_R6
558	select SYS_HAS_CPU_MIPS64_R1
559	select SYS_HAS_CPU_MIPS64_R2
560	select SYS_HAS_CPU_MIPS64_R6
561	select SYS_HAS_CPU_NEVADA
562	select SYS_HAS_CPU_RM7000
563	select SYS_SUPPORTS_32BIT_KERNEL
564	select SYS_SUPPORTS_64BIT_KERNEL
565	select SYS_SUPPORTS_BIG_ENDIAN
566	select SYS_SUPPORTS_HIGHMEM
567	select SYS_SUPPORTS_LITTLE_ENDIAN
568	select SYS_SUPPORTS_MICROMIPS
569	select SYS_SUPPORTS_MIPS16
570	select SYS_SUPPORTS_MIPS_CPS
571	select SYS_SUPPORTS_MULTITHREADING
572	select SYS_SUPPORTS_RELOCATABLE
573	select SYS_SUPPORTS_SMARTMIPS
574	select SYS_SUPPORTS_VPE_LOADER
575	select SYS_SUPPORTS_ZBOOT
576	select USE_OF
577	select WAR_ICACHE_REFILLS
578	select ZONE_DMA32 if 64BIT
579	help
580	  This enables support for the MIPS Technologies Malta evaluation
581	  board.
582
583config MACH_PIC32
584	bool "Microchip PIC32 Family"
585	help
586	  This enables support for the Microchip PIC32 family of platforms.
587
588	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
589	  microcontrollers.
590
591config MACH_NINTENDO64
592	bool "Nintendo 64 console"
593	select CEVT_R4K
594	select CSRC_R4K
595	select SYS_HAS_CPU_R4300
596	select SYS_SUPPORTS_BIG_ENDIAN
597	select SYS_SUPPORTS_ZBOOT
598	select SYS_SUPPORTS_32BIT_KERNEL
599	select SYS_SUPPORTS_64BIT_KERNEL
600	select DMA_NONCOHERENT
601	select IRQ_MIPS_CPU
602
603config RALINK
604	bool "Ralink based machines"
605	select CEVT_R4K
606	select COMMON_CLK
607	select CSRC_R4K
608	select BOOT_RAW
609	select DMA_NONCOHERENT
610	select IRQ_MIPS_CPU
611	select USE_OF
612	select SYS_HAS_CPU_MIPS32_R2
613	select SYS_SUPPORTS_32BIT_KERNEL
614	select SYS_SUPPORTS_LITTLE_ENDIAN
615	select SYS_SUPPORTS_MIPS16
616	select SYS_SUPPORTS_ZBOOT
617	select SYS_HAS_EARLY_PRINTK
618	select ARCH_HAS_RESET_CONTROLLER
619	select RESET_CONTROLLER
620
621config MACH_REALTEK_RTL
622	bool "Realtek RTL838x/RTL839x based machines"
623	select MIPS_GENERIC
624	select DMA_NONCOHERENT
625	select IRQ_MIPS_CPU
626	select CSRC_R4K
627	select CEVT_R4K
628	select SYS_HAS_CPU_MIPS32_R1
629	select SYS_HAS_CPU_MIPS32_R2
630	select SYS_SUPPORTS_BIG_ENDIAN
631	select SYS_SUPPORTS_32BIT_KERNEL
632	select SYS_SUPPORTS_MIPS16
633	select SYS_SUPPORTS_MULTITHREADING
634	select SYS_SUPPORTS_VPE_LOADER
635	select BOOT_RAW
636	select PINCTRL
637	select USE_OF
638
639config SGI_IP22
640	bool "SGI IP22 (Indy/Indigo2)"
641	select ARC_MEMORY
642	select ARC_PROMLIB
643	select FW_ARC
644	select FW_ARC32
645	select ARCH_MIGHT_HAVE_PC_SERIO
646	select BOOT_ELF32
647	select CEVT_R4K
648	select CSRC_R4K
649	select DEFAULT_SGI_PARTITION
650	select DMA_NONCOHERENT
651	select HAVE_EISA
652	select I8253
653	select I8259
654	select IP22_CPU_SCACHE
655	select IRQ_MIPS_CPU
656	select GENERIC_ISA_DMA_SUPPORT_BROKEN
657	select SGI_HAS_I8042
658	select SGI_HAS_INDYDOG
659	select SGI_HAS_HAL2
660	select SGI_HAS_SEEQ
661	select SGI_HAS_WD93
662	select SGI_HAS_ZILOG
663	select SWAP_IO_SPACE
664	select SYS_HAS_CPU_R4X00
665	select SYS_HAS_CPU_R5000
666	select SYS_HAS_EARLY_PRINTK
667	select SYS_SUPPORTS_32BIT_KERNEL
668	select SYS_SUPPORTS_64BIT_KERNEL
669	select SYS_SUPPORTS_BIG_ENDIAN
670	select WAR_R4600_V1_INDEX_ICACHEOP
671	select WAR_R4600_V1_HIT_CACHEOP
672	select WAR_R4600_V2_HIT_CACHEOP
673	select MIPS_L1_CACHE_SHIFT_7
674	help
675	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
676	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
677	  that runs on these, say Y here.
678
679config SGI_IP27
680	bool "SGI IP27 (Origin200/2000)"
681	select ARCH_HAS_PHYS_TO_DMA
682	select ARCH_SPARSEMEM_ENABLE
683	select FW_ARC
684	select FW_ARC64
685	select ARC_CMDLINE_ONLY
686	select BOOT_ELF64
687	select DEFAULT_SGI_PARTITION
688	select FORCE_PCI
689	select SYS_HAS_EARLY_PRINTK
690	select HAVE_PCI
691	select IRQ_MIPS_CPU
692	select IRQ_DOMAIN_HIERARCHY
693	select NR_CPUS_DEFAULT_64
694	select PCI_DRIVERS_GENERIC
695	select PCI_XTALK_BRIDGE
696	select SYS_HAS_CPU_R10000
697	select SYS_SUPPORTS_64BIT_KERNEL
698	select SYS_SUPPORTS_BIG_ENDIAN
699	select SYS_SUPPORTS_NUMA
700	select SYS_SUPPORTS_SMP
701	select WAR_R10000_LLSC
702	select MIPS_L1_CACHE_SHIFT_7
703	select NUMA
704	select HAVE_ARCH_NODEDATA_EXTENSION
705	help
706	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
707	  workstations.  To compile a Linux kernel that runs on these, say Y
708	  here.
709
710config SGI_IP28
711	bool "SGI IP28 (Indigo2 R10k)"
712	select ARC_MEMORY
713	select ARC_PROMLIB
714	select FW_ARC
715	select FW_ARC64
716	select ARCH_MIGHT_HAVE_PC_SERIO
717	select BOOT_ELF64
718	select CEVT_R4K
719	select CSRC_R4K
720	select DEFAULT_SGI_PARTITION
721	select DMA_NONCOHERENT
722	select GENERIC_ISA_DMA_SUPPORT_BROKEN
723	select IRQ_MIPS_CPU
724	select HAVE_EISA
725	select I8253
726	select I8259
727	select SGI_HAS_I8042
728	select SGI_HAS_INDYDOG
729	select SGI_HAS_HAL2
730	select SGI_HAS_SEEQ
731	select SGI_HAS_WD93
732	select SGI_HAS_ZILOG
733	select SWAP_IO_SPACE
734	select SYS_HAS_CPU_R10000
735	select SYS_HAS_EARLY_PRINTK
736	select SYS_SUPPORTS_64BIT_KERNEL
737	select SYS_SUPPORTS_BIG_ENDIAN
738	select WAR_R10000_LLSC
739	select MIPS_L1_CACHE_SHIFT_7
740	help
741	  This is the SGI Indigo2 with R10000 processor.  To compile a Linux
742	  kernel that runs on these, say Y here.
743
744config SGI_IP30
745	bool "SGI IP30 (Octane/Octane2)"
746	select ARCH_HAS_PHYS_TO_DMA
747	select FW_ARC
748	select FW_ARC64
749	select BOOT_ELF64
750	select CEVT_R4K
751	select CSRC_R4K
752	select FORCE_PCI
753	select SYNC_R4K if SMP
754	select ZONE_DMA32
755	select HAVE_PCI
756	select IRQ_MIPS_CPU
757	select IRQ_DOMAIN_HIERARCHY
758	select PCI_DRIVERS_GENERIC
759	select PCI_XTALK_BRIDGE
760	select SYS_HAS_EARLY_PRINTK
761	select SYS_HAS_CPU_R10000
762	select SYS_SUPPORTS_64BIT_KERNEL
763	select SYS_SUPPORTS_BIG_ENDIAN
764	select SYS_SUPPORTS_SMP
765	select WAR_R10000_LLSC
766	select MIPS_L1_CACHE_SHIFT_7
767	select ARC_MEMORY
768	help
769	  These are the SGI Octane and Octane2 graphics workstations.  To
770	  compile a Linux kernel that runs on these, say Y here.
771
772config SGI_IP32
773	bool "SGI IP32 (O2)"
774	select ARC_MEMORY
775	select ARC_PROMLIB
776	select ARCH_HAS_PHYS_TO_DMA
777	select FW_ARC
778	select FW_ARC32
779	select BOOT_ELF32
780	select CEVT_R4K
781	select CSRC_R4K
782	select DMA_NONCOHERENT
783	select HAVE_PCI
784	select IRQ_MIPS_CPU
785	select R5000_CPU_SCACHE
786	select RM7000_CPU_SCACHE
787	select SYS_HAS_CPU_R5000
788	select SYS_HAS_CPU_R10000 if BROKEN
789	select SYS_HAS_CPU_RM7000
790	select SYS_HAS_CPU_NEVADA
791	select SYS_SUPPORTS_64BIT_KERNEL
792	select SYS_SUPPORTS_BIG_ENDIAN
793	select WAR_ICACHE_REFILLS
794	help
795	  If you want this kernel to run on SGI O2 workstation, say Y here.
796
797config SIBYTE_CRHONE
798	bool "Sibyte BCM91125C-CRhone"
799	select BOOT_ELF32
800	select SIBYTE_BCM1125
801	select SWAP_IO_SPACE
802	select SYS_HAS_CPU_SB1
803	select SYS_SUPPORTS_BIG_ENDIAN
804	select SYS_SUPPORTS_HIGHMEM
805	select SYS_SUPPORTS_LITTLE_ENDIAN
806
807config SIBYTE_RHONE
808	bool "Sibyte BCM91125E-Rhone"
809	select BOOT_ELF32
810	select SIBYTE_SB1250
811	select SWAP_IO_SPACE
812	select SYS_HAS_CPU_SB1
813	select SYS_SUPPORTS_BIG_ENDIAN
814	select SYS_SUPPORTS_LITTLE_ENDIAN
815
816config SIBYTE_SWARM
817	bool "Sibyte BCM91250A-SWARM"
818	select BOOT_ELF32
819	select HAVE_PATA_PLATFORM
820	select SIBYTE_SB1250
821	select SWAP_IO_SPACE
822	select SYS_HAS_CPU_SB1
823	select SYS_SUPPORTS_BIG_ENDIAN
824	select SYS_SUPPORTS_HIGHMEM
825	select SYS_SUPPORTS_LITTLE_ENDIAN
826	select ZONE_DMA32 if 64BIT
827	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
828
829config SIBYTE_LITTLESUR
830	bool "Sibyte BCM91250C2-LittleSur"
831	select BOOT_ELF32
832	select HAVE_PATA_PLATFORM
833	select SIBYTE_SB1250
834	select SWAP_IO_SPACE
835	select SYS_HAS_CPU_SB1
836	select SYS_SUPPORTS_BIG_ENDIAN
837	select SYS_SUPPORTS_HIGHMEM
838	select SYS_SUPPORTS_LITTLE_ENDIAN
839	select ZONE_DMA32 if 64BIT
840
841config SIBYTE_SENTOSA
842	bool "Sibyte BCM91250E-Sentosa"
843	select BOOT_ELF32
844	select SIBYTE_SB1250
845	select SWAP_IO_SPACE
846	select SYS_HAS_CPU_SB1
847	select SYS_SUPPORTS_BIG_ENDIAN
848	select SYS_SUPPORTS_LITTLE_ENDIAN
849	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
850
851config SIBYTE_BIGSUR
852	bool "Sibyte BCM91480B-BigSur"
853	select BOOT_ELF32
854	select NR_CPUS_DEFAULT_4
855	select SIBYTE_BCM1x80
856	select SWAP_IO_SPACE
857	select SYS_HAS_CPU_SB1
858	select SYS_SUPPORTS_BIG_ENDIAN
859	select SYS_SUPPORTS_HIGHMEM
860	select SYS_SUPPORTS_LITTLE_ENDIAN
861	select ZONE_DMA32 if 64BIT
862	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
863
864config SNI_RM
865	bool "SNI RM200/300/400"
866	select ARC_MEMORY
867	select ARC_PROMLIB
868	select FW_ARC if CPU_LITTLE_ENDIAN
869	select FW_ARC32 if CPU_LITTLE_ENDIAN
870	select FW_SNIPROM if CPU_BIG_ENDIAN
871	select ARCH_MAY_HAVE_PC_FDC
872	select ARCH_MIGHT_HAVE_PC_PARPORT
873	select ARCH_MIGHT_HAVE_PC_SERIO
874	select BOOT_ELF32
875	select CEVT_R4K
876	select CSRC_R4K
877	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
878	select DMA_NONCOHERENT
879	select GENERIC_ISA_DMA
880	select HAVE_EISA
881	select HAVE_PCSPKR_PLATFORM
882	select HAVE_PCI
883	select IRQ_MIPS_CPU
884	select I8253
885	select I8259
886	select ISA
887	select MIPS_L1_CACHE_SHIFT_6
888	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
889	select SYS_HAS_CPU_R4X00
890	select SYS_HAS_CPU_R5000
891	select SYS_HAS_CPU_R10000
892	select R5000_CPU_SCACHE
893	select SYS_HAS_EARLY_PRINTK
894	select SYS_SUPPORTS_32BIT_KERNEL
895	select SYS_SUPPORTS_64BIT_KERNEL
896	select SYS_SUPPORTS_BIG_ENDIAN
897	select SYS_SUPPORTS_HIGHMEM
898	select SYS_SUPPORTS_LITTLE_ENDIAN
899	select WAR_R4600_V2_HIT_CACHEOP
900	help
901	  The SNI RM200/300/400 are MIPS-based machines manufactured by
902	  Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
903	  Technology and now in turn merged with Fujitsu.  Say Y here to
904	  support this machine type.
905
906config MACH_TX49XX
907	bool "Toshiba TX49 series based machines"
908	select WAR_TX49XX_ICACHE_INDEX_INV
909
910config MIKROTIK_RB532
911	bool "Mikrotik RB532 boards"
912	select CEVT_R4K
913	select CSRC_R4K
914	select DMA_NONCOHERENT
915	select HAVE_PCI
916	select IRQ_MIPS_CPU
917	select SYS_HAS_CPU_MIPS32_R1
918	select SYS_SUPPORTS_32BIT_KERNEL
919	select SYS_SUPPORTS_LITTLE_ENDIAN
920	select SWAP_IO_SPACE
921	select BOOT_RAW
922	select GPIOLIB
923	select MIPS_L1_CACHE_SHIFT_4
924	help
925	  Support the Mikrotik(tm) RouterBoard 532 series,
926	  based on the IDT RC32434 SoC.
927
928config CAVIUM_OCTEON_SOC
929	bool "Cavium Networks Octeon SoC based boards"
930	select CEVT_R4K
931	select ARCH_HAS_PHYS_TO_DMA
932	select HAVE_RAPIDIO
933	select PHYS_ADDR_T_64BIT
934	select SYS_SUPPORTS_64BIT_KERNEL
935	select SYS_SUPPORTS_BIG_ENDIAN
936	select EDAC_SUPPORT
937	select EDAC_ATOMIC_SCRUB
938	select SYS_SUPPORTS_LITTLE_ENDIAN
939	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
940	select SYS_HAS_EARLY_PRINTK
941	select SYS_HAS_CPU_CAVIUM_OCTEON
942	select HAVE_PCI
943	select HAVE_PLAT_DELAY
944	select HAVE_PLAT_FW_INIT_CMDLINE
945	select HAVE_PLAT_MEMCPY
946	select ZONE_DMA32
947	select GPIOLIB
948	select USE_OF
949	select ARCH_SPARSEMEM_ENABLE
950	select SYS_SUPPORTS_SMP
951	select NR_CPUS_DEFAULT_64
952	select MIPS_NR_CPU_NR_MAP_1024
953	select BUILTIN_DTB
954	select MTD
955	select MTD_COMPLEX_MAPPINGS
956	select SWIOTLB
957	select SYS_SUPPORTS_RELOCATABLE
958	help
959	  This option supports all of the Octeon reference boards from Cavium
960	  Networks. It builds a kernel that dynamically determines the Octeon
961	  CPU type and supports all known board reference implementations.
962	  Some of the supported boards are:
963		EBT3000
964		EBH3000
965		EBH3100
966		Thunder
967		Kodama
968		Hikari
969	  Say Y here for most Octeon reference boards.
970
971endchoice
972
973source "arch/mips/alchemy/Kconfig"
974source "arch/mips/ath25/Kconfig"
975source "arch/mips/ath79/Kconfig"
976source "arch/mips/bcm47xx/Kconfig"
977source "arch/mips/bcm63xx/Kconfig"
978source "arch/mips/bmips/Kconfig"
979source "arch/mips/generic/Kconfig"
980source "arch/mips/ingenic/Kconfig"
981source "arch/mips/jazz/Kconfig"
982source "arch/mips/lantiq/Kconfig"
983source "arch/mips/pic32/Kconfig"
984source "arch/mips/ralink/Kconfig"
985source "arch/mips/sgi-ip27/Kconfig"
986source "arch/mips/sibyte/Kconfig"
987source "arch/mips/txx9/Kconfig"
988source "arch/mips/cavium-octeon/Kconfig"
989source "arch/mips/loongson2ef/Kconfig"
990source "arch/mips/loongson32/Kconfig"
991source "arch/mips/loongson64/Kconfig"
992
993endmenu
994
995config GENERIC_HWEIGHT
996	bool
997	default y
998
999config GENERIC_CALIBRATE_DELAY
1000	bool
1001	default y
1002
1003config SCHED_OMIT_FRAME_POINTER
1004	bool
1005	default y
1006
1007#
1008# Select some configuration options automatically based on user selections.
1009#
1010config FW_ARC
1011	bool
1012
1013config ARCH_MAY_HAVE_PC_FDC
1014	bool
1015
1016config BOOT_RAW
1017	bool
1018
1019config CEVT_BCM1480
1020	bool
1021
1022config CEVT_DS1287
1023	bool
1024
1025config CEVT_GT641XX
1026	bool
1027
1028config CEVT_R4K
1029	bool
1030
1031config CEVT_SB1250
1032	bool
1033
1034config CEVT_TXX9
1035	bool
1036
1037config CSRC_BCM1480
1038	bool
1039
1040config CSRC_IOASIC
1041	bool
1042
1043config CSRC_R4K
1044	select CLOCKSOURCE_WATCHDOG if CPU_FREQ
1045	bool
1046
1047config CSRC_SB1250
1048	bool
1049
1050config MIPS_CLOCK_VSYSCALL
1051	def_bool CSRC_R4K || CLKSRC_MIPS_GIC
1052
1053config GPIO_TXX9
1054	select GPIOLIB
1055	bool
1056
1057config FW_CFE
1058	bool
1059
1060config ARCH_SUPPORTS_UPROBES
1061	def_bool y
1062
1063config DMA_NONCOHERENT
1064	bool
1065	#
1066	# MIPS allows mixing "slightly different" Cacheability and Coherency
1067	# Attribute bits.  It is believed that the uncached access through
1068	# KSEG1 and the implementation specific "uncached accelerated" used
1069	# by pgprot_writcombine can be mixed, and the latter sometimes provides
1070	# significant advantages.
1071	#
1072	select ARCH_HAS_SETUP_DMA_OPS
1073	select ARCH_HAS_DMA_WRITE_COMBINE
1074	select ARCH_HAS_DMA_PREP_COHERENT
1075	select ARCH_HAS_SYNC_DMA_FOR_CPU
1076	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
1077	select ARCH_HAS_DMA_SET_UNCACHED
1078	select DMA_NONCOHERENT_MMAP
1079	select NEED_DMA_MAP_STATE
1080
1081config SYS_HAS_EARLY_PRINTK
1082	bool
1083
1084config SYS_SUPPORTS_HOTPLUG_CPU
1085	bool
1086
1087config MIPS_BONITO64
1088	bool
1089
1090config MIPS_MSC
1091	bool
1092
1093config SYNC_R4K
1094	bool
1095
1096config NO_IOPORT_MAP
1097	def_bool n
1098
1099config GENERIC_CSUM
1100	def_bool CPU_NO_LOAD_STORE_LR
1101
1102config GENERIC_ISA_DMA
1103	bool
1104	select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
1105	select ISA_DMA_API
1106
1107config GENERIC_ISA_DMA_SUPPORT_BROKEN
1108	bool
1109	select GENERIC_ISA_DMA
1110
1111config HAVE_PLAT_DELAY
1112	bool
1113
1114config HAVE_PLAT_FW_INIT_CMDLINE
1115	bool
1116
1117config HAVE_PLAT_MEMCPY
1118	bool
1119
1120config ISA_DMA_API
1121	bool
1122
1123config SYS_SUPPORTS_RELOCATABLE
1124	bool
1125	help
1126	  Selected if the platform supports relocating the kernel.
1127	  The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
1128	  to allow access to command line and entropy sources.
1129
1130#
1131# Endianness selection.  Sufficiently obscure so many users don't know what to
1132# answer,so we try hard to limit the available choices.  Also the use of a
1133# choice statement should be more obvious to the user.
1134#
1135choice
1136	prompt "Endianness selection"
1137	help
1138	  Some MIPS machines can be configured for either little or big endian
1139	  byte order. These modes require different kernels and a different
1140	  Linux distribution.  In general there is one preferred byteorder for a
1141	  particular system but some systems are just as commonly used in the
1142	  one or the other endianness.
1143
1144config CPU_BIG_ENDIAN
1145	bool "Big endian"
1146	depends on SYS_SUPPORTS_BIG_ENDIAN
1147
1148config CPU_LITTLE_ENDIAN
1149	bool "Little endian"
1150	depends on SYS_SUPPORTS_LITTLE_ENDIAN
1151
1152endchoice
1153
1154config EXPORT_UASM
1155	bool
1156
1157config SYS_SUPPORTS_APM_EMULATION
1158	bool
1159
1160config SYS_SUPPORTS_BIG_ENDIAN
1161	bool
1162
1163config SYS_SUPPORTS_LITTLE_ENDIAN
1164	bool
1165
1166config MIPS_HUGE_TLB_SUPPORT
1167	def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
1168
1169config IRQ_TXX9
1170	bool
1171
1172config IRQ_GT641XX
1173	bool
1174
1175config PCI_GT64XXX_PCI0
1176	bool
1177
1178config PCI_XTALK_BRIDGE
1179	bool
1180
1181config NO_EXCEPT_FILL
1182	bool
1183
1184config MIPS_SPRAM
1185	bool
1186
1187config SWAP_IO_SPACE
1188	bool
1189
1190config SGI_HAS_INDYDOG
1191	bool
1192
1193config SGI_HAS_HAL2
1194	bool
1195
1196config SGI_HAS_SEEQ
1197	bool
1198
1199config SGI_HAS_WD93
1200	bool
1201
1202config SGI_HAS_ZILOG
1203	bool
1204
1205config SGI_HAS_I8042
1206	bool
1207
1208config DEFAULT_SGI_PARTITION
1209	bool
1210
1211config FW_ARC32
1212	bool
1213
1214config FW_SNIPROM
1215	bool
1216
1217config BOOT_ELF32
1218	bool
1219
1220config MIPS_L1_CACHE_SHIFT_4
1221	bool
1222
1223config MIPS_L1_CACHE_SHIFT_5
1224	bool
1225
1226config MIPS_L1_CACHE_SHIFT_6
1227	bool
1228
1229config MIPS_L1_CACHE_SHIFT_7
1230	bool
1231
1232config MIPS_L1_CACHE_SHIFT
1233	int
1234	default "7" if MIPS_L1_CACHE_SHIFT_7
1235	default "6" if MIPS_L1_CACHE_SHIFT_6
1236	default "5" if MIPS_L1_CACHE_SHIFT_5
1237	default "4" if MIPS_L1_CACHE_SHIFT_4
1238	default "5"
1239
1240config ARC_CMDLINE_ONLY
1241	bool
1242
1243config ARC_CONSOLE
1244	bool "ARC console support"
1245	depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
1246
1247config ARC_MEMORY
1248	bool
1249
1250config ARC_PROMLIB
1251	bool
1252
1253config FW_ARC64
1254	bool
1255
1256config BOOT_ELF64
1257	bool
1258
1259menu "CPU selection"
1260
1261choice
1262	prompt "CPU type"
1263	default CPU_R4X00
1264
1265config CPU_LOONGSON64
1266	bool "Loongson 64-bit CPU"
1267	depends on SYS_HAS_CPU_LOONGSON64
1268	select ARCH_HAS_PHYS_TO_DMA
1269	select CPU_MIPSR2
1270	select CPU_HAS_PREFETCH
1271	select CPU_SUPPORTS_64BIT_KERNEL
1272	select CPU_SUPPORTS_HIGHMEM
1273	select CPU_SUPPORTS_HUGEPAGES
1274	select CPU_SUPPORTS_MSA
1275	select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
1276	select CPU_MIPSR2_IRQ_VI
1277	select DMA_NONCOHERENT
1278	select WEAK_ORDERING
1279	select WEAK_REORDERING_BEYOND_LLSC
1280	select MIPS_ASID_BITS_VARIABLE
1281	select MIPS_PGD_C0_CONTEXT
1282	select MIPS_L1_CACHE_SHIFT_6
1283	select MIPS_FP_SUPPORT
1284	select GPIOLIB
1285	select SWIOTLB
1286	select HAVE_KVM
1287	help
1288	  The Loongson GSx64(GS264/GS464/GS464E/GS464V) series of processor
1289	  cores implements the MIPS64R2 instruction set with many extensions,
1290	  including most 64-bit Loongson-2 (2H, 2K) and Loongson-3 (3A1000,
1291	  3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old
1292	  Loongson-2E/2F is not covered here and will be removed in future.
1293
1294config LOONGSON3_ENHANCEMENT
1295	bool "New Loongson-3 CPU Enhancements"
1296	default n
1297	depends on CPU_LOONGSON64
1298	help
1299	  New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A
1300	  R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
1301	  FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User
1302	  Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
1303	  Fast TLB refill support, etc.
1304
1305	  This option enable those enhancements which are not probed at run
1306	  time. If you want a generic kernel to run on all Loongson 3 machines,
1307	  please say 'N' here. If you want a high-performance kernel to run on
1308	  new Loongson-3 machines only, please say 'Y' here.
1309
1310config CPU_LOONGSON3_WORKAROUNDS
1311	bool "Loongson-3 LLSC Workarounds"
1312	default y if SMP
1313	depends on CPU_LOONGSON64
1314	help
1315	  Loongson-3 processors have the llsc issues which require workarounds.
1316	  Without workarounds the system may hang unexpectedly.
1317
1318	  Say Y, unless you know what you are doing.
1319
1320config CPU_LOONGSON3_CPUCFG_EMULATION
1321	bool "Emulate the CPUCFG instruction on older Loongson cores"
1322	default y
1323	depends on CPU_LOONGSON64
1324	help
1325	  Loongson-3A R4 and newer have the CPUCFG instruction available for
1326	  userland to query CPU capabilities, much like CPUID on x86. This
1327	  option provides emulation of the instruction on older Loongson
1328	  cores, back to Loongson-3A1000.
1329
1330	  If unsure, please say Y.
1331
1332config CPU_LOONGSON2E
1333	bool "Loongson 2E"
1334	depends on SYS_HAS_CPU_LOONGSON2E
1335	select CPU_LOONGSON2EF
1336	help
1337	  The Loongson 2E processor implements the MIPS III instruction set
1338	  with many extensions.
1339
1340	  It has an internal FPGA northbridge, which is compatible to
1341	  bonito64.
1342
1343config CPU_LOONGSON2F
1344	bool "Loongson 2F"
1345	depends on SYS_HAS_CPU_LOONGSON2F
1346	select CPU_LOONGSON2EF
1347	help
1348	  The Loongson 2F processor implements the MIPS III instruction set
1349	  with many extensions.
1350
1351	  Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
1352	  have a similar programming interface with FPGA northbridge used in
1353	  Loongson2E.
1354
1355config CPU_LOONGSON1B
1356	bool "Loongson 1B"
1357	depends on SYS_HAS_CPU_LOONGSON1B
1358	select CPU_LOONGSON32
1359	select LEDS_GPIO_REGISTER
1360	help
1361	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
1362	  Release 1 instruction set and part of the MIPS32 Release 2
1363	  instruction set.
1364
1365config CPU_LOONGSON1C
1366	bool "Loongson 1C"
1367	depends on SYS_HAS_CPU_LOONGSON1C
1368	select CPU_LOONGSON32
1369	select LEDS_GPIO_REGISTER
1370	help
1371	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
1372	  Release 1 instruction set and part of the MIPS32 Release 2
1373	  instruction set.
1374
1375config CPU_MIPS32_R1
1376	bool "MIPS32 Release 1"
1377	depends on SYS_HAS_CPU_MIPS32_R1
1378	select CPU_HAS_PREFETCH
1379	select CPU_SUPPORTS_32BIT_KERNEL
1380	select CPU_SUPPORTS_HIGHMEM
1381	help
1382	  Choose this option to build a kernel for release 1 or later of the
1383	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
1384	  MIPS processor are based on a MIPS32 processor.  If you know the
1385	  specific type of processor in your system, choose those that one
1386	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
1387	  Release 2 of the MIPS32 architecture is available since several
1388	  years so chances are you even have a MIPS32 Release 2 processor
1389	  in which case you should choose CPU_MIPS32_R2 instead for better
1390	  performance.
1391
1392config CPU_MIPS32_R2
1393	bool "MIPS32 Release 2"
1394	depends on SYS_HAS_CPU_MIPS32_R2
1395	select CPU_HAS_PREFETCH
1396	select CPU_SUPPORTS_32BIT_KERNEL
1397	select CPU_SUPPORTS_HIGHMEM
1398	select CPU_SUPPORTS_MSA
1399	select HAVE_KVM
1400	help
1401	  Choose this option to build a kernel for release 2 or later of the
1402	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
1403	  MIPS processor are based on a MIPS32 processor.  If you know the
1404	  specific type of processor in your system, choose those that one
1405	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
1406
1407config CPU_MIPS32_R5
1408	bool "MIPS32 Release 5"
1409	depends on SYS_HAS_CPU_MIPS32_R5
1410	select CPU_HAS_PREFETCH
1411	select CPU_SUPPORTS_32BIT_KERNEL
1412	select CPU_SUPPORTS_HIGHMEM
1413	select CPU_SUPPORTS_MSA
1414	select HAVE_KVM
1415	select MIPS_O32_FP64_SUPPORT
1416	help
1417	  Choose this option to build a kernel for release 5 or later of the
1418	  MIPS32 architecture.  New MIPS processors, starting with the Warrior
1419	  family, are based on a MIPS32r5 processor. If you own an older
1420	  processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
1421
1422config CPU_MIPS32_R6
1423	bool "MIPS32 Release 6"
1424	depends on SYS_HAS_CPU_MIPS32_R6
1425	select CPU_HAS_PREFETCH
1426	select CPU_NO_LOAD_STORE_LR
1427	select CPU_SUPPORTS_32BIT_KERNEL
1428	select CPU_SUPPORTS_HIGHMEM
1429	select CPU_SUPPORTS_MSA
1430	select HAVE_KVM
1431	select MIPS_O32_FP64_SUPPORT
1432	help
1433	  Choose this option to build a kernel for release 6 or later of the
1434	  MIPS32 architecture.  New MIPS processors, starting with the Warrior
1435	  family, are based on a MIPS32r6 processor. If you own an older
1436	  processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
1437
1438config CPU_MIPS64_R1
1439	bool "MIPS64 Release 1"
1440	depends on SYS_HAS_CPU_MIPS64_R1
1441	select CPU_HAS_PREFETCH
1442	select CPU_SUPPORTS_32BIT_KERNEL
1443	select CPU_SUPPORTS_64BIT_KERNEL
1444	select CPU_SUPPORTS_HIGHMEM
1445	select CPU_SUPPORTS_HUGEPAGES
1446	help
1447	  Choose this option to build a kernel for release 1 or later of the
1448	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
1449	  MIPS processor are based on a MIPS64 processor.  If you know the
1450	  specific type of processor in your system, choose those that one
1451	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
1452	  Release 2 of the MIPS64 architecture is available since several
1453	  years so chances are you even have a MIPS64 Release 2 processor
1454	  in which case you should choose CPU_MIPS64_R2 instead for better
1455	  performance.
1456
1457config CPU_MIPS64_R2
1458	bool "MIPS64 Release 2"
1459	depends on SYS_HAS_CPU_MIPS64_R2
1460	select CPU_HAS_PREFETCH
1461	select CPU_SUPPORTS_32BIT_KERNEL
1462	select CPU_SUPPORTS_64BIT_KERNEL
1463	select CPU_SUPPORTS_HIGHMEM
1464	select CPU_SUPPORTS_HUGEPAGES
1465	select CPU_SUPPORTS_MSA
1466	select HAVE_KVM
1467	help
1468	  Choose this option to build a kernel for release 2 or later of the
1469	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
1470	  MIPS processor are based on a MIPS64 processor.  If you know the
1471	  specific type of processor in your system, choose those that one
1472	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
1473
1474config CPU_MIPS64_R5
1475	bool "MIPS64 Release 5"
1476	depends on SYS_HAS_CPU_MIPS64_R5
1477	select CPU_HAS_PREFETCH
1478	select CPU_SUPPORTS_32BIT_KERNEL
1479	select CPU_SUPPORTS_64BIT_KERNEL
1480	select CPU_SUPPORTS_HIGHMEM
1481	select CPU_SUPPORTS_HUGEPAGES
1482	select CPU_SUPPORTS_MSA
1483	select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
1484	select HAVE_KVM
1485	help
1486	  Choose this option to build a kernel for release 5 or later of the
1487	  MIPS64 architecture.  This is a intermediate MIPS architecture
1488	  release partly implementing release 6 features. Though there is no
1489	  any hardware known to be based on this release.
1490
1491config CPU_MIPS64_R6
1492	bool "MIPS64 Release 6"
1493	depends on SYS_HAS_CPU_MIPS64_R6
1494	select CPU_HAS_PREFETCH
1495	select CPU_NO_LOAD_STORE_LR
1496	select CPU_SUPPORTS_32BIT_KERNEL
1497	select CPU_SUPPORTS_64BIT_KERNEL
1498	select CPU_SUPPORTS_HIGHMEM
1499	select CPU_SUPPORTS_HUGEPAGES
1500	select CPU_SUPPORTS_MSA
1501	select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
1502	select HAVE_KVM
1503	help
1504	  Choose this option to build a kernel for release 6 or later of the
1505	  MIPS64 architecture.  New MIPS processors, starting with the Warrior
1506	  family, are based on a MIPS64r6 processor. If you own an older
1507	  processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
1508
1509config CPU_P5600
1510	bool "MIPS Warrior P5600"
1511	depends on SYS_HAS_CPU_P5600
1512	select CPU_HAS_PREFETCH
1513	select CPU_SUPPORTS_32BIT_KERNEL
1514	select CPU_SUPPORTS_HIGHMEM
1515	select CPU_SUPPORTS_MSA
1516	select CPU_SUPPORTS_CPUFREQ
1517	select CPU_MIPSR2_IRQ_VI
1518	select CPU_MIPSR2_IRQ_EI
1519	select HAVE_KVM
1520	select MIPS_O32_FP64_SUPPORT
1521	help
1522	  Choose this option to build a kernel for MIPS Warrior P5600 CPU.
1523	  It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes,
1524	  MMU with two-levels TLB, UCA, MSA, MDU core level features and system
1525	  level features like up to six P5600 calculation cores, CM2 with L2
1526	  cache, IOCU/IOMMU (though might be unused depending on the system-
1527	  specific IP core configuration), GIC, CPC, virtualisation module,
1528	  eJTAG and PDtrace.
1529
1530config CPU_R3000
1531	bool "R3000"
1532	depends on SYS_HAS_CPU_R3000
1533	select CPU_HAS_WB
1534	select CPU_R3K_TLB
1535	select CPU_SUPPORTS_32BIT_KERNEL
1536	select CPU_SUPPORTS_HIGHMEM
1537	help
1538	  Please make sure to pick the right CPU type. Linux/MIPS is not
1539	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
1540	  *not* work on R4000 machines and vice versa.  However, since most
1541	  of the supported machines have an R4000 (or similar) CPU, R4x00
1542	  might be a safe bet.  If the resulting kernel does not work,
1543	  try to recompile with R3000.
1544
1545config CPU_R4300
1546	bool "R4300"
1547	depends on SYS_HAS_CPU_R4300
1548	select CPU_SUPPORTS_32BIT_KERNEL
1549	select CPU_SUPPORTS_64BIT_KERNEL
1550	help
1551	  MIPS Technologies R4300-series processors.
1552
1553config CPU_R4X00
1554	bool "R4x00"
1555	depends on SYS_HAS_CPU_R4X00
1556	select CPU_SUPPORTS_32BIT_KERNEL
1557	select CPU_SUPPORTS_64BIT_KERNEL
1558	select CPU_SUPPORTS_HUGEPAGES
1559	help
1560	  MIPS Technologies R4000-series processors other than 4300, including
1561	  the R4000, R4400, R4600, and 4700.
1562
1563config CPU_TX49XX
1564	bool "R49XX"
1565	depends on SYS_HAS_CPU_TX49XX
1566	select CPU_HAS_PREFETCH
1567	select CPU_SUPPORTS_32BIT_KERNEL
1568	select CPU_SUPPORTS_64BIT_KERNEL
1569	select CPU_SUPPORTS_HUGEPAGES
1570
1571config CPU_R5000
1572	bool "R5000"
1573	depends on SYS_HAS_CPU_R5000
1574	select CPU_SUPPORTS_32BIT_KERNEL
1575	select CPU_SUPPORTS_64BIT_KERNEL
1576	select CPU_SUPPORTS_HUGEPAGES
1577	help
1578	  MIPS Technologies R5000-series processors other than the Nevada.
1579
1580config CPU_R5500
1581	bool "R5500"
1582	depends on SYS_HAS_CPU_R5500
1583	select CPU_SUPPORTS_32BIT_KERNEL
1584	select CPU_SUPPORTS_64BIT_KERNEL
1585	select CPU_SUPPORTS_HUGEPAGES
1586	help
1587	  NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
1588	  instruction set.
1589
1590config CPU_NEVADA
1591	bool "RM52xx"
1592	depends on SYS_HAS_CPU_NEVADA
1593	select CPU_SUPPORTS_32BIT_KERNEL
1594	select CPU_SUPPORTS_64BIT_KERNEL
1595	select CPU_SUPPORTS_HUGEPAGES
1596	help
1597	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.
1598
1599config CPU_R10000
1600	bool "R10000"
1601	depends on SYS_HAS_CPU_R10000
1602	select CPU_HAS_PREFETCH
1603	select CPU_SUPPORTS_32BIT_KERNEL
1604	select CPU_SUPPORTS_64BIT_KERNEL
1605	select CPU_SUPPORTS_HIGHMEM
1606	select CPU_SUPPORTS_HUGEPAGES
1607	help
1608	  MIPS Technologies R10000-series processors.
1609
1610config CPU_RM7000
1611	bool "RM7000"
1612	depends on SYS_HAS_CPU_RM7000
1613	select CPU_HAS_PREFETCH
1614	select CPU_SUPPORTS_32BIT_KERNEL
1615	select CPU_SUPPORTS_64BIT_KERNEL
1616	select CPU_SUPPORTS_HIGHMEM
1617	select CPU_SUPPORTS_HUGEPAGES
1618
1619config CPU_SB1
1620	bool "SB1"
1621	depends on SYS_HAS_CPU_SB1
1622	select CPU_SUPPORTS_32BIT_KERNEL
1623	select CPU_SUPPORTS_64BIT_KERNEL
1624	select CPU_SUPPORTS_HIGHMEM
1625	select CPU_SUPPORTS_HUGEPAGES
1626	select WEAK_ORDERING
1627
1628config CPU_CAVIUM_OCTEON
1629	bool "Cavium Octeon processor"
1630	depends on SYS_HAS_CPU_CAVIUM_OCTEON
1631	select CPU_HAS_PREFETCH
1632	select CPU_SUPPORTS_64BIT_KERNEL
1633	select WEAK_ORDERING
1634	select CPU_SUPPORTS_HIGHMEM
1635	select CPU_SUPPORTS_HUGEPAGES
1636	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
1637	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
1638	select MIPS_L1_CACHE_SHIFT_7
1639	select HAVE_KVM
1640	help
1641	  The Cavium Octeon processor is a highly integrated chip containing
1642	  many ethernet hardware widgets for networking tasks. The processor
1643	  can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
1644	  Full details can be found at http://www.caviumnetworks.com.
1645
1646config CPU_BMIPS
1647	bool "Broadcom BMIPS"
1648	depends on SYS_HAS_CPU_BMIPS
1649	select CPU_MIPS32
1650	select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
1651	select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
1652	select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
1653	select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
1654	select CPU_SUPPORTS_32BIT_KERNEL
1655	select DMA_NONCOHERENT
1656	select IRQ_MIPS_CPU
1657	select SWAP_IO_SPACE
1658	select WEAK_ORDERING
1659	select CPU_SUPPORTS_HIGHMEM
1660	select CPU_HAS_PREFETCH
1661	select CPU_SUPPORTS_CPUFREQ
1662	select MIPS_EXTERNAL_TIMER
1663	select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
1664	help
1665	  Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
1666
1667endchoice
1668
1669config CPU_MIPS32_3_5_FEATURES
1670	bool "MIPS32 Release 3.5 Features"
1671	depends on SYS_HAS_CPU_MIPS32_R3_5
1672	depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \
1673		   CPU_P5600
1674	help
1675	  Choose this option to build a kernel for release 2 or later of the
1676	  MIPS32 architecture including features from the 3.5 release such as
1677	  support for Enhanced Virtual Addressing (EVA).
1678
1679config CPU_MIPS32_3_5_EVA
1680	bool "Enhanced Virtual Addressing (EVA)"
1681	depends on CPU_MIPS32_3_5_FEATURES
1682	select EVA
1683	default y
1684	help
1685	  Choose this option if you want to enable the Enhanced Virtual
1686	  Addressing (EVA) on your MIPS32 core (such as proAptiv).
1687	  One of its primary benefits is an increase in the maximum size
1688	  of lowmem (up to 3GB). If unsure, say 'N' here.
1689
1690config CPU_MIPS32_R5_FEATURES
1691	bool "MIPS32 Release 5 Features"
1692	depends on SYS_HAS_CPU_MIPS32_R5
1693	depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600
1694	help
1695	  Choose this option to build a kernel for release 2 or later of the
1696	  MIPS32 architecture including features from release 5 such as
1697	  support for Extended Physical Addressing (XPA).
1698
1699config CPU_MIPS32_R5_XPA
1700	bool "Extended Physical Addressing (XPA)"
1701	depends on CPU_MIPS32_R5_FEATURES
1702	depends on !EVA
1703	depends on !PAGE_SIZE_4KB
1704	depends on SYS_SUPPORTS_HIGHMEM
1705	select XPA
1706	select HIGHMEM
1707	select PHYS_ADDR_T_64BIT
1708	default n
1709	help
1710	  Choose this option if you want to enable the Extended Physical
1711	  Addressing (XPA) on your MIPS32 core (such as P5600 series). The
1712	  benefit is to increase physical addressing equal to or greater
1713	  than 40 bits. Note that this has the side effect of turning on
1714	  64-bit addressing which in turn makes the PTEs 64-bit in size.
1715	  If unsure, say 'N' here.
1716
1717if CPU_LOONGSON2F
1718config CPU_NOP_WORKAROUNDS
1719	bool
1720
1721config CPU_JUMP_WORKAROUNDS
1722	bool
1723
1724config CPU_LOONGSON2F_WORKAROUNDS
1725	bool "Loongson 2F Workarounds"
1726	default y
1727	select CPU_NOP_WORKAROUNDS
1728	select CPU_JUMP_WORKAROUNDS
1729	help
1730	  Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
1731	  require workarounds.  Without workarounds the system may hang
1732	  unexpectedly.  For more information please refer to the gas
1733	  -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
1734
1735	  Loongson 2F03 and later have fixed these issues and no workarounds
1736	  are needed.  The workarounds have no significant side effect on them
1737	  but may decrease the performance of the system so this option should
1738	  be disabled unless the kernel is intended to be run on 2F01 or 2F02
1739	  systems.
1740
1741	  If unsure, please say Y.
1742endif # CPU_LOONGSON2F
1743
1744config SYS_SUPPORTS_ZBOOT
1745	bool
1746	select HAVE_KERNEL_GZIP
1747	select HAVE_KERNEL_BZIP2
1748	select HAVE_KERNEL_LZ4
1749	select HAVE_KERNEL_LZMA
1750	select HAVE_KERNEL_LZO
1751	select HAVE_KERNEL_XZ
1752	select HAVE_KERNEL_ZSTD
1753
1754config SYS_SUPPORTS_ZBOOT_UART16550
1755	bool
1756	select SYS_SUPPORTS_ZBOOT
1757
1758config SYS_SUPPORTS_ZBOOT_UART_PROM
1759	bool
1760	select SYS_SUPPORTS_ZBOOT
1761
1762config CPU_LOONGSON2EF
1763	bool
1764	select CPU_SUPPORTS_32BIT_KERNEL
1765	select CPU_SUPPORTS_64BIT_KERNEL
1766	select CPU_SUPPORTS_HIGHMEM
1767	select CPU_SUPPORTS_HUGEPAGES
1768
1769config CPU_LOONGSON32
1770	bool
1771	select CPU_MIPS32
1772	select CPU_MIPSR2
1773	select CPU_HAS_PREFETCH
1774	select CPU_SUPPORTS_32BIT_KERNEL
1775	select CPU_SUPPORTS_HIGHMEM
1776	select CPU_SUPPORTS_CPUFREQ
1777
1778config CPU_BMIPS32_3300
1779	select SMP_UP if SMP
1780	bool
1781
1782config CPU_BMIPS4350
1783	bool
1784	select SYS_SUPPORTS_SMP
1785	select SYS_SUPPORTS_HOTPLUG_CPU
1786
1787config CPU_BMIPS4380
1788	bool
1789	select MIPS_L1_CACHE_SHIFT_6
1790	select SYS_SUPPORTS_SMP
1791	select SYS_SUPPORTS_HOTPLUG_CPU
1792	select CPU_HAS_RIXI
1793
1794config CPU_BMIPS5000
1795	bool
1796	select MIPS_CPU_SCACHE
1797	select MIPS_L1_CACHE_SHIFT_7
1798	select SYS_SUPPORTS_SMP
1799	select SYS_SUPPORTS_HOTPLUG_CPU
1800	select CPU_HAS_RIXI
1801
1802config SYS_HAS_CPU_LOONGSON64
1803	bool
1804	select CPU_SUPPORTS_CPUFREQ
1805	select CPU_HAS_RIXI
1806
1807config SYS_HAS_CPU_LOONGSON2E
1808	bool
1809
1810config SYS_HAS_CPU_LOONGSON2F
1811	bool
1812	select CPU_SUPPORTS_CPUFREQ
1813	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
1814
1815config SYS_HAS_CPU_LOONGSON1B
1816	bool
1817
1818config SYS_HAS_CPU_LOONGSON1C
1819	bool
1820
1821config SYS_HAS_CPU_MIPS32_R1
1822	bool
1823
1824config SYS_HAS_CPU_MIPS32_R2
1825	bool
1826
1827config SYS_HAS_CPU_MIPS32_R3_5
1828	bool
1829
1830config SYS_HAS_CPU_MIPS32_R5
1831	bool
1832
1833config SYS_HAS_CPU_MIPS32_R6
1834	bool
1835
1836config SYS_HAS_CPU_MIPS64_R1
1837	bool
1838
1839config SYS_HAS_CPU_MIPS64_R2
1840	bool
1841
1842config SYS_HAS_CPU_MIPS64_R5
1843	bool
1844
1845config SYS_HAS_CPU_MIPS64_R6
1846	bool
1847
1848config SYS_HAS_CPU_P5600
1849	bool
1850
1851config SYS_HAS_CPU_R3000
1852	bool
1853
1854config SYS_HAS_CPU_R4300
1855	bool
1856
1857config SYS_HAS_CPU_R4X00
1858	bool
1859
1860config SYS_HAS_CPU_TX49XX
1861	bool
1862
1863config SYS_HAS_CPU_R5000
1864	bool
1865
1866config SYS_HAS_CPU_R5500
1867	bool
1868
1869config SYS_HAS_CPU_NEVADA
1870	bool
1871
1872config SYS_HAS_CPU_R10000
1873	bool
1874
1875config SYS_HAS_CPU_RM7000
1876	bool
1877
1878config SYS_HAS_CPU_SB1
1879	bool
1880
1881config SYS_HAS_CPU_CAVIUM_OCTEON
1882	bool
1883
1884config SYS_HAS_CPU_BMIPS
1885	bool
1886
1887config SYS_HAS_CPU_BMIPS32_3300
1888	bool
1889	select SYS_HAS_CPU_BMIPS
1890
1891config SYS_HAS_CPU_BMIPS4350
1892	bool
1893	select SYS_HAS_CPU_BMIPS
1894
1895config SYS_HAS_CPU_BMIPS4380
1896	bool
1897	select SYS_HAS_CPU_BMIPS
1898
1899config SYS_HAS_CPU_BMIPS5000
1900	bool
1901	select SYS_HAS_CPU_BMIPS
1902
1903#
1904# CPU may reorder R->R, R->W, W->R, W->W
1905# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
1906#
1907config WEAK_ORDERING
1908	bool
1909
1910#
1911# CPU may reorder reads and writes beyond LL/SC
1912# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC
1913#
1914config WEAK_REORDERING_BEYOND_LLSC
1915	bool
1916endmenu
1917
1918#
1919# These two indicate any level of the MIPS32 and MIPS64 architecture
1920#
1921config CPU_MIPS32
1922	bool
1923	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
1924		     CPU_MIPS32_R6 || CPU_P5600
1925
1926config CPU_MIPS64
1927	bool
1928	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \
1929		     CPU_MIPS64_R6 || CPU_LOONGSON64 || CPU_CAVIUM_OCTEON
1930
1931#
1932# These indicate the revision of the architecture
1933#
1934config CPU_MIPSR1
1935	bool
1936	default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
1937
1938config CPU_MIPSR2
1939	bool
1940	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
1941	select CPU_HAS_RIXI
1942	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
1943	select MIPS_SPRAM
1944
1945config CPU_MIPSR5
1946	bool
1947	default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600
1948	select CPU_HAS_RIXI
1949	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
1950	select MIPS_SPRAM
1951
1952config CPU_MIPSR6
1953	bool
1954	default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
1955	select CPU_HAS_RIXI
1956	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
1957	select HAVE_ARCH_BITREVERSE
1958	select MIPS_ASID_BITS_VARIABLE
1959	select MIPS_CRC_SUPPORT
1960	select MIPS_SPRAM
1961
1962config TARGET_ISA_REV
1963	int
1964	default 1 if CPU_MIPSR1
1965	default 2 if CPU_MIPSR2
1966	default 5 if CPU_MIPSR5
1967	default 6 if CPU_MIPSR6
1968	default 0
1969	help
1970	  Reflects the ISA revision being targeted by the kernel build. This
1971	  is effectively the Kconfig equivalent of MIPS_ISA_REV.
1972
1973config EVA
1974	bool
1975
1976config XPA
1977	bool
1978
1979config SYS_SUPPORTS_32BIT_KERNEL
1980	bool
1981config SYS_SUPPORTS_64BIT_KERNEL
1982	bool
1983config CPU_SUPPORTS_32BIT_KERNEL
1984	bool
1985config CPU_SUPPORTS_64BIT_KERNEL
1986	bool
1987config CPU_SUPPORTS_CPUFREQ
1988	bool
1989config CPU_SUPPORTS_ADDRWINCFG
1990	bool
1991config CPU_SUPPORTS_HUGEPAGES
1992	bool
1993	depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA))
1994config MIPS_PGD_C0_CONTEXT
1995	bool
1996	depends on 64BIT
1997	default y if (CPU_MIPSR2 || CPU_MIPSR6)
1998
1999#
2000# Set to y for ptrace access to watch registers.
2001#
2002config HARDWARE_WATCHPOINTS
2003	bool
2004	default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
2005
2006menu "Kernel type"
2007
2008choice
2009	prompt "Kernel code model"
2010	help
2011	  You should only select this option if you have a workload that
2012	  actually benefits from 64-bit processing or if your machine has
2013	  large memory.  You will only be presented a single option in this
2014	  menu if your system does not support both 32-bit and 64-bit kernels.
2015
2016config 32BIT
2017	bool "32-bit kernel"
2018	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
2019	select TRAD_SIGNALS
2020	help
2021	  Select this option if you want to build a 32-bit kernel.
2022
2023config 64BIT
2024	bool "64-bit kernel"
2025	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
2026	help
2027	  Select this option if you want to build a 64-bit kernel.
2028
2029endchoice
2030
2031config MIPS_VA_BITS_48
2032	bool "48 bits virtual memory"
2033	depends on 64BIT
2034	help
2035	  Support a maximum at least 48 bits of application virtual
2036	  memory.  Default is 40 bits or less, depending on the CPU.
2037	  For page sizes 16k and above, this option results in a small
2038	  memory overhead for page tables.  For 4k page size, a fourth
2039	  level of page tables is added which imposes both a memory
2040	  overhead as well as slower TLB fault handling.
2041
2042	  If unsure, say N.
2043
2044config ZBOOT_LOAD_ADDRESS
2045	hex "Compressed kernel load address"
2046	default 0xffffffff80400000 if BCM47XX
2047	default 0x0
2048	depends on SYS_SUPPORTS_ZBOOT
2049	help
2050	  The address to load compressed kernel, aka vmlinuz.
2051
2052	  This is only used if non-zero.
2053
2054choice
2055	prompt "Kernel page size"
2056	default PAGE_SIZE_4KB
2057
2058config PAGE_SIZE_4KB
2059	bool "4kB"
2060	depends on !CPU_LOONGSON2EF && !CPU_LOONGSON64
2061	help
2062	  This option select the standard 4kB Linux page size.  On some
2063	  R3000-family processors this is the only available page size.  Using
2064	  4kB page size will minimize memory consumption and is therefore
2065	  recommended for low memory systems.
2066
2067config PAGE_SIZE_8KB
2068	bool "8kB"
2069	depends on CPU_CAVIUM_OCTEON
2070	depends on !MIPS_VA_BITS_48
2071	help
2072	  Using 8kB page size will result in higher performance kernel at
2073	  the price of higher memory consumption.  This option is available
2074	  only on cnMIPS processors.  Note that you will need a suitable Linux
2075	  distribution to support this.
2076
2077config PAGE_SIZE_16KB
2078	bool "16kB"
2079	depends on !CPU_R3000
2080	help
2081	  Using 16kB page size will result in higher performance kernel at
2082	  the price of higher memory consumption.  This option is available on
2083	  all non-R3000 family processors.  Note that you will need a suitable
2084	  Linux distribution to support this.
2085
2086config PAGE_SIZE_32KB
2087	bool "32kB"
2088	depends on CPU_CAVIUM_OCTEON
2089	depends on !MIPS_VA_BITS_48
2090	help
2091	  Using 32kB page size will result in higher performance kernel at
2092	  the price of higher memory consumption.  This option is available
2093	  only on cnMIPS cores.  Note that you will need a suitable Linux
2094	  distribution to support this.
2095
2096config PAGE_SIZE_64KB
2097	bool "64kB"
2098	depends on !CPU_R3000
2099	help
2100	  Using 64kB page size will result in higher performance kernel at
2101	  the price of higher memory consumption.  This option is available on
2102	  all non-R3000 family processor.  Not that at the time of this
2103	  writing this option is still high experimental.
2104
2105endchoice
2106
2107config ARCH_FORCE_MAX_ORDER
2108	int "Maximum zone order"
2109	default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
2110	default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
2111	default "11" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
2112	default "10"
2113	help
2114	  The kernel memory allocator divides physically contiguous memory
2115	  blocks into "zones", where each zone is a power of two number of
2116	  pages.  This option selects the largest power of two that the kernel
2117	  keeps in the memory allocator.  If you need to allocate very large
2118	  blocks of physically contiguous memory, then you may need to
2119	  increase this value.
2120
2121	  The page size is not necessarily 4KB.  Keep this in mind
2122	  when choosing a value for this option.
2123
2124config BOARD_SCACHE
2125	bool
2126
2127config IP22_CPU_SCACHE
2128	bool
2129	select BOARD_SCACHE
2130
2131#
2132# Support for a MIPS32 / MIPS64 style S-caches
2133#
2134config MIPS_CPU_SCACHE
2135	bool
2136	select BOARD_SCACHE
2137
2138config R5000_CPU_SCACHE
2139	bool
2140	select BOARD_SCACHE
2141
2142config RM7000_CPU_SCACHE
2143	bool
2144	select BOARD_SCACHE
2145
2146config SIBYTE_DMA_PAGEOPS
2147	bool "Use DMA to clear/copy pages"
2148	depends on CPU_SB1
2149	help
2150	  Instead of using the CPU to zero and copy pages, use a Data Mover
2151	  channel.  These DMA channels are otherwise unused by the standard
2152	  SiByte Linux port.  Seems to give a small performance benefit.
2153
2154config CPU_HAS_PREFETCH
2155	bool
2156
2157config CPU_GENERIC_DUMP_TLB
2158	bool
2159	default y if !CPU_R3000
2160
2161config MIPS_FP_SUPPORT
2162	bool "Floating Point support" if EXPERT
2163	default y
2164	help
2165	  Select y to include support for floating point in the kernel
2166	  including initialization of FPU hardware, FP context save & restore
2167	  and emulation of an FPU where necessary. Without this support any
2168	  userland program attempting to use floating point instructions will
2169	  receive a SIGILL.
2170
2171	  If you know that your userland will not attempt to use floating point
2172	  instructions then you can say n here to shrink the kernel a little.
2173
2174	  If unsure, say y.
2175
2176config CPU_R2300_FPU
2177	bool
2178	depends on MIPS_FP_SUPPORT
2179	default y if CPU_R3000
2180
2181config CPU_R3K_TLB
2182	bool
2183
2184config CPU_R4K_FPU
2185	bool
2186	depends on MIPS_FP_SUPPORT
2187	default y if !CPU_R2300_FPU
2188
2189config CPU_R4K_CACHE_TLB
2190	bool
2191	default y if !(CPU_R3K_TLB || CPU_SB1 || CPU_CAVIUM_OCTEON)
2192
2193config MIPS_MT_SMP
2194	bool "MIPS MT SMP support (1 TC on each available VPE)"
2195	default y
2196	depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MIPSR6 && !CPU_MICROMIPS
2197	select CPU_MIPSR2_IRQ_VI
2198	select CPU_MIPSR2_IRQ_EI
2199	select SYNC_R4K
2200	select MIPS_MT
2201	select SMP
2202	select SMP_UP
2203	select SYS_SUPPORTS_SMP
2204	select SYS_SUPPORTS_SCHED_SMT
2205	select MIPS_PERF_SHARED_TC_COUNTERS
2206	help
2207	  This is a kernel model which is known as SMVP. This is supported
2208	  on cores with the MT ASE and uses the available VPEs to implement
2209	  virtual processors which supports SMP. This is equivalent to the
2210	  Intel Hyperthreading feature. For further information go to
2211	  <http://www.imgtec.com/mips/mips-multithreading.asp>.
2212
2213config MIPS_MT
2214	bool
2215
2216config SCHED_SMT
2217	bool "SMT (multithreading) scheduler support"
2218	depends on SYS_SUPPORTS_SCHED_SMT
2219	default n
2220	help
2221	  SMT scheduler support improves the CPU scheduler's decision making
2222	  when dealing with MIPS MT enabled cores at a cost of slightly
2223	  increased overhead in some places. If unsure say N here.
2224
2225config SYS_SUPPORTS_SCHED_SMT
2226	bool
2227
2228config SYS_SUPPORTS_MULTITHREADING
2229	bool
2230
2231config MIPS_MT_FPAFF
2232	bool "Dynamic FPU affinity for FP-intensive threads"
2233	default y
2234	depends on MIPS_MT_SMP
2235
2236config MIPSR2_TO_R6_EMULATOR
2237	bool "MIPS R2-to-R6 emulator"
2238	depends on CPU_MIPSR6
2239	depends on MIPS_FP_SUPPORT
2240	default y
2241	help
2242	  Choose this option if you want to run non-R6 MIPS userland code.
2243	  Even if you say 'Y' here, the emulator will still be disabled by
2244	  default. You can enable it using the 'mipsr2emu' kernel option.
2245	  The only reason this is a build-time option is to save ~14K from the
2246	  final kernel image.
2247
2248config SYS_SUPPORTS_VPE_LOADER
2249	bool
2250	depends on SYS_SUPPORTS_MULTITHREADING
2251	help
2252	  Indicates that the platform supports the VPE loader, and provides
2253	  physical_memsize.
2254
2255config MIPS_VPE_LOADER
2256	bool "VPE loader support."
2257	depends on SYS_SUPPORTS_VPE_LOADER && MODULES
2258	select CPU_MIPSR2_IRQ_VI
2259	select CPU_MIPSR2_IRQ_EI
2260	select MIPS_MT
2261	help
2262	  Includes a loader for loading an elf relocatable object
2263	  onto another VPE and running it.
2264
2265config MIPS_VPE_LOADER_MT
2266	bool
2267	default "y"
2268	depends on MIPS_VPE_LOADER
2269
2270config MIPS_VPE_LOADER_TOM
2271	bool "Load VPE program into memory hidden from linux"
2272	depends on MIPS_VPE_LOADER
2273	default y
2274	help
2275	  The loader can use memory that is present but has been hidden from
2276	  Linux using the kernel command line option "mem=xxMB". It's up to
2277	  you to ensure the amount you put in the option and the space your
2278	  program requires is less or equal to the amount physically present.
2279
2280config MIPS_VPE_APSP_API
2281	bool "Enable support for AP/SP API (RTLX)"
2282	depends on MIPS_VPE_LOADER
2283
2284config MIPS_VPE_APSP_API_MT
2285	bool
2286	default "y"
2287	depends on MIPS_VPE_APSP_API
2288
2289config MIPS_CPS
2290	bool "MIPS Coherent Processing System support"
2291	depends on SYS_SUPPORTS_MIPS_CPS
2292	select MIPS_CM
2293	select MIPS_CPS_PM if HOTPLUG_CPU
2294	select SMP
2295	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
2296	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
2297	select SYS_SUPPORTS_HOTPLUG_CPU
2298	select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
2299	select SYS_SUPPORTS_SMP
2300	select WEAK_ORDERING
2301	select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
2302	help
2303	  Select this if you wish to run an SMP kernel across multiple cores
2304	  within a MIPS Coherent Processing System. When this option is
2305	  enabled the kernel will probe for other cores and boot them with
2306	  no external assistance. It is safe to enable this when hardware
2307	  support is unavailable.
2308
2309config MIPS_CPS_PM
2310	depends on MIPS_CPS
2311	bool
2312
2313config MIPS_CM
2314	bool
2315	select MIPS_CPC
2316
2317config MIPS_CPC
2318	bool
2319
2320config SB1_PASS_2_WORKAROUNDS
2321	bool
2322	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
2323	default y
2324
2325config SB1_PASS_2_1_WORKAROUNDS
2326	bool
2327	depends on CPU_SB1 && CPU_SB1_PASS_2
2328	default y
2329
2330choice
2331	prompt "SmartMIPS or microMIPS ASE support"
2332
2333config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
2334	bool "None"
2335	help
2336	  Select this if you want neither microMIPS nor SmartMIPS support
2337
2338config CPU_HAS_SMARTMIPS
2339	depends on SYS_SUPPORTS_SMARTMIPS
2340	bool "SmartMIPS"
2341	help
2342	  SmartMIPS is a extension of the MIPS32 architecture aimed at
2343	  increased security at both hardware and software level for
2344	  smartcards.  Enabling this option will allow proper use of the
2345	  SmartMIPS instructions by Linux applications.  However a kernel with
2346	  this option will not work on a MIPS core without SmartMIPS core.  If
2347	  you don't know you probably don't have SmartMIPS and should say N
2348	  here.
2349
2350config CPU_MICROMIPS
2351	depends on 32BIT && SYS_SUPPORTS_MICROMIPS && !CPU_MIPSR6
2352	bool "microMIPS"
2353	help
2354	  When this option is enabled the kernel will be built using the
2355	  microMIPS ISA
2356
2357endchoice
2358
2359config CPU_HAS_MSA
2360	bool "Support for the MIPS SIMD Architecture"
2361	depends on CPU_SUPPORTS_MSA
2362	depends on MIPS_FP_SUPPORT
2363	depends on 64BIT || MIPS_O32_FP64_SUPPORT
2364	help
2365	  MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers
2366	  and a set of SIMD instructions to operate on them. When this option
2367	  is enabled the kernel will support allocating & switching MSA
2368	  vector register contexts. If you know that your kernel will only be
2369	  running on CPUs which do not support MSA or that your userland will
2370	  not be making use of it then you may wish to say N here to reduce
2371	  the size & complexity of your kernel.
2372
2373	  If unsure, say Y.
2374
2375config CPU_HAS_WB
2376	bool
2377
2378config XKS01
2379	bool
2380
2381config CPU_HAS_DIEI
2382	depends on !CPU_DIEI_BROKEN
2383	bool
2384
2385config CPU_DIEI_BROKEN
2386	bool
2387
2388config CPU_HAS_RIXI
2389	bool
2390
2391config CPU_NO_LOAD_STORE_LR
2392	bool
2393	help
2394	  CPU lacks support for unaligned load and store instructions:
2395	  LWL, LWR, SWL, SWR (Load/store word left/right).
2396	  LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
2397	  systems).
2398
2399#
2400# Vectored interrupt mode is an R2 feature
2401#
2402config CPU_MIPSR2_IRQ_VI
2403	bool
2404
2405#
2406# Extended interrupt mode is an R2 feature
2407#
2408config CPU_MIPSR2_IRQ_EI
2409	bool
2410
2411config CPU_HAS_SYNC
2412	bool
2413	depends on !CPU_R3000
2414	default y
2415
2416#
2417# CPU non-features
2418#
2419
2420# Work around the "daddi" and "daddiu" CPU errata:
2421#
2422# - The `daddi' instruction fails to trap on overflow.
2423#   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
2424#   erratum #23
2425#
2426# - The `daddiu' instruction can produce an incorrect result.
2427#   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
2428#   erratum #41
2429#   "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
2430#   #15
2431#   "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7
2432#   "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5
2433config CPU_DADDI_WORKAROUNDS
2434	bool
2435
2436# Work around certain R4000 CPU errata (as implemented by GCC):
2437#
2438# - A double-word or a variable shift may give an incorrect result
2439#   if executed immediately after starting an integer division:
2440#   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
2441#   erratum #28
2442#   "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
2443#   #19
2444#
2445# - A double-word or a variable shift may give an incorrect result
2446#   if executed while an integer multiplication is in progress:
2447#   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
2448#   errata #16 & #28
2449#
2450# - An integer division may give an incorrect result if started in
2451#   a delay slot of a taken branch or a jump:
2452#   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
2453#   erratum #52
2454config CPU_R4000_WORKAROUNDS
2455	bool
2456	select CPU_R4400_WORKAROUNDS
2457
2458# Work around certain R4400 CPU errata (as implemented by GCC):
2459#
2460# - A double-word or a variable shift may give an incorrect result
2461#   if executed immediately after starting an integer division:
2462#   "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
2463#   "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4
2464config CPU_R4400_WORKAROUNDS
2465	bool
2466
2467config CPU_R4X00_BUGS64
2468	bool
2469	default y if SYS_HAS_CPU_R4X00 && 64BIT && (TARGET_ISA_REV < 1)
2470
2471config MIPS_ASID_SHIFT
2472	int
2473	default 6 if CPU_R3000
2474	default 0
2475
2476config MIPS_ASID_BITS
2477	int
2478	default 0 if MIPS_ASID_BITS_VARIABLE
2479	default 6 if CPU_R3000
2480	default 8
2481
2482config MIPS_ASID_BITS_VARIABLE
2483	bool
2484
2485config MIPS_CRC_SUPPORT
2486	bool
2487
2488# R4600 erratum.  Due to the lack of errata information the exact
2489# technical details aren't known.  I've experimentally found that disabling
2490# interrupts during indexed I-cache flushes seems to be sufficient to deal
2491# with the issue.
2492config WAR_R4600_V1_INDEX_ICACHEOP
2493	bool
2494
2495# Pleasures of the R4600 V1.x.  Cite from the IDT R4600 V1.7 errata:
2496#
2497#  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
2498#      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
2499#      executed if there is no other dcache activity. If the dcache is
2500#      accessed for another instruction immediately preceding when these
2501#      cache instructions are executing, it is possible that the dcache
2502#      tag match outputs used by these cache instructions will be
2503#      incorrect. These cache instructions should be preceded by at least
2504#      four instructions that are not any kind of load or store
2505#      instruction.
2506#
2507#      This is not allowed:    lw
2508#                              nop
2509#                              nop
2510#                              nop
2511#                              cache       Hit_Writeback_Invalidate_D
2512#
2513#      This is allowed:        lw
2514#                              nop
2515#                              nop
2516#                              nop
2517#                              nop
2518#                              cache       Hit_Writeback_Invalidate_D
2519config WAR_R4600_V1_HIT_CACHEOP
2520	bool
2521
2522# Writeback and invalidate the primary cache dcache before DMA.
2523#
2524# R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
2525# Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
2526# operate correctly if the internal data cache refill buffer is empty.  These
2527# CACHE instructions should be separated from any potential data cache miss
2528# by a load instruction to an uncached address to empty the response buffer."
2529# (Revision 2.0 device errata from IDT available on https://www.idt.com/
2530# in .pdf format.)
2531config WAR_R4600_V2_HIT_CACHEOP
2532	bool
2533
2534# From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
2535# the line which this instruction itself exists, the following
2536# operation is not guaranteed."
2537#
2538# Workaround: do two phase flushing for Index_Invalidate_I
2539config WAR_TX49XX_ICACHE_INDEX_INV
2540	bool
2541
2542# The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
2543# opposes it being called that) where invalid instructions in the same
2544# I-cache line worth of instructions being fetched may case spurious
2545# exceptions.
2546config WAR_ICACHE_REFILLS
2547	bool
2548
2549# On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that
2550# may cause ll / sc and lld / scd sequences to execute non-atomically.
2551config WAR_R10000_LLSC
2552	bool
2553
2554# 34K core erratum: "Problems Executing the TLBR Instruction"
2555config WAR_MIPS34K_MISSED_ITLB
2556	bool
2557
2558#
2559# - Highmem only makes sense for the 32-bit kernel.
2560# - The current highmem code will only work properly on physically indexed
2561#   caches such as R3000, SB1, R7000 or those that look like they're virtually
2562#   indexed such as R4000/R4400 SC and MC versions or R10000.  So for the
2563#   moment we protect the user and offer the highmem option only on machines
2564#   where it's known to be safe.  This will not offer highmem on a few systems
2565#   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
2566#   indexed CPUs but we're playing safe.
2567# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
2568#   know they might have memory configurations that could make use of highmem
2569#   support.
2570#
2571config HIGHMEM
2572	bool "High Memory Support"
2573	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM && !CPU_MIPS32_3_5_EVA
2574	select KMAP_LOCAL
2575
2576config CPU_SUPPORTS_HIGHMEM
2577	bool
2578
2579config SYS_SUPPORTS_HIGHMEM
2580	bool
2581
2582config SYS_SUPPORTS_SMARTMIPS
2583	bool
2584
2585config SYS_SUPPORTS_MICROMIPS
2586	bool
2587
2588config SYS_SUPPORTS_MIPS16
2589	bool
2590	help
2591	  This option must be set if a kernel might be executed on a MIPS16-
2592	  enabled CPU even if MIPS16 is not actually being used.  In other
2593	  words, it makes the kernel MIPS16-tolerant.
2594
2595config CPU_SUPPORTS_MSA
2596	bool
2597
2598config ARCH_FLATMEM_ENABLE
2599	def_bool y
2600	depends on !NUMA && !CPU_LOONGSON2EF
2601
2602config ARCH_SPARSEMEM_ENABLE
2603	bool
2604
2605config NUMA
2606	bool "NUMA Support"
2607	depends on SYS_SUPPORTS_NUMA
2608	select SMP
2609	select HAVE_SETUP_PER_CPU_AREA
2610	select NEED_PER_CPU_EMBED_FIRST_CHUNK
2611	help
2612	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
2613	  Access).  This option improves performance on systems with more
2614	  than two nodes; on two node systems it is generally better to
2615	  leave it disabled; on single node systems leave this option
2616	  disabled.
2617
2618config SYS_SUPPORTS_NUMA
2619	bool
2620
2621config HAVE_ARCH_NODEDATA_EXTENSION
2622	bool
2623
2624config RELOCATABLE
2625	bool "Relocatable kernel"
2626	depends on SYS_SUPPORTS_RELOCATABLE
2627	depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \
2628		   CPU_MIPS32_R5 || CPU_MIPS64_R5 || \
2629		   CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
2630		   CPU_P5600 || CAVIUM_OCTEON_SOC || \
2631		   CPU_LOONGSON64
2632	help
2633	  This builds a kernel image that retains relocation information
2634	  so it can be loaded someplace besides the default 1MB.
2635	  The relocations make the kernel binary about 15% larger,
2636	  but are discarded at runtime
2637
2638config RELOCATION_TABLE_SIZE
2639	hex "Relocation table size"
2640	depends on RELOCATABLE
2641	range 0x0 0x01000000
2642	default "0x00200000" if CPU_LOONGSON64
2643	default "0x00100000"
2644	help
2645	  A table of relocation data will be appended to the kernel binary
2646	  and parsed at boot to fix up the relocated kernel.
2647
2648	  This option allows the amount of space reserved for the table to be
2649	  adjusted, although the default of 1Mb should be ok in most cases.
2650
2651	  The build will fail and a valid size suggested if this is too small.
2652
2653	  If unsure, leave at the default value.
2654
2655config RANDOMIZE_BASE
2656	bool "Randomize the address of the kernel image"
2657	depends on RELOCATABLE
2658	help
2659	  Randomizes the physical and virtual address at which the
2660	  kernel image is loaded, as a security feature that
2661	  deters exploit attempts relying on knowledge of the location
2662	  of kernel internals.
2663
2664	  Entropy is generated using any coprocessor 0 registers available.
2665
2666	  The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
2667
2668	  If unsure, say N.
2669
2670config RANDOMIZE_BASE_MAX_OFFSET
2671	hex "Maximum kASLR offset" if EXPERT
2672	depends on RANDOMIZE_BASE
2673	range 0x0 0x40000000 if EVA || 64BIT
2674	range 0x0 0x08000000
2675	default "0x01000000"
2676	help
2677	  When kASLR is active, this provides the maximum offset that will
2678	  be applied to the kernel image. It should be set according to the
2679	  amount of physical RAM available in the target system minus
2680	  PHYSICAL_START and must be a power of 2.
2681
2682	  This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with
2683	  EVA or 64-bit. The default is 16Mb.
2684
2685config NODES_SHIFT
2686	int
2687	default "6"
2688	depends on NUMA
2689
2690config HW_PERF_EVENTS
2691	bool "Enable hardware performance counter support for perf events"
2692	depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_LOONGSON64)
2693	default y
2694	help
2695	  Enable hardware performance counter support for perf events. If
2696	  disabled, perf events will use software events only.
2697
2698config DMI
2699	bool "Enable DMI scanning"
2700	depends on MACH_LOONGSON64
2701	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
2702	default y
2703	help
2704	  Enabled scanning of DMI to identify machine quirks. Say Y
2705	  here unless you have verified that your setup is not
2706	  affected by entries in the DMI blacklist. Required by PNP
2707	  BIOS code.
2708
2709config SMP
2710	bool "Multi-Processing support"
2711	depends on SYS_SUPPORTS_SMP
2712	help
2713	  This enables support for systems with more than one CPU. If you have
2714	  a system with only one CPU, say N. If you have a system with more
2715	  than one CPU, say Y.
2716
2717	  If you say N here, the kernel will run on uni- and multiprocessor
2718	  machines, but will use only one CPU of a multiprocessor machine. If
2719	  you say Y here, the kernel will run on many, but not all,
2720	  uniprocessor machines. On a uniprocessor machine, the kernel
2721	  will run faster if you say N here.
2722
2723	  People using multiprocessor machines who say Y here should also say
2724	  Y to "Enhanced Real Time Clock Support", below.
2725
2726	  See also the SMP-HOWTO available at
2727	  <https://www.tldp.org/docs.html#howto>.
2728
2729	  If you don't know what to do here, say N.
2730
2731config HOTPLUG_CPU
2732	bool "Support for hot-pluggable CPUs"
2733	depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
2734	help
2735	  Say Y here to allow turning CPUs off and on. CPUs can be
2736	  controlled through /sys/devices/system/cpu.
2737	  (Note: power management support will enable this option
2738	    automatically on SMP systems. )
2739	  Say N if you want to disable CPU hotplug.
2740
2741config SMP_UP
2742	bool
2743
2744config SYS_SUPPORTS_MIPS_CPS
2745	bool
2746
2747config SYS_SUPPORTS_SMP
2748	bool
2749
2750config NR_CPUS_DEFAULT_4
2751	bool
2752
2753config NR_CPUS_DEFAULT_8
2754	bool
2755
2756config NR_CPUS_DEFAULT_16
2757	bool
2758
2759config NR_CPUS_DEFAULT_32
2760	bool
2761
2762config NR_CPUS_DEFAULT_64
2763	bool
2764
2765config NR_CPUS
2766	int "Maximum number of CPUs (2-256)"
2767	range 2 256
2768	depends on SMP
2769	default "4" if NR_CPUS_DEFAULT_4
2770	default "8" if NR_CPUS_DEFAULT_8
2771	default "16" if NR_CPUS_DEFAULT_16
2772	default "32" if NR_CPUS_DEFAULT_32
2773	default "64" if NR_CPUS_DEFAULT_64
2774	help
2775	  This allows you to specify the maximum number of CPUs which this
2776	  kernel will support.  The maximum supported value is 32 for 32-bit
2777	  kernel and 64 for 64-bit kernels; the minimum value which makes
2778	  sense is 1 for Qemu (useful only for kernel debugging purposes)
2779	  and 2 for all others.
2780
2781	  This is purely to save memory - each supported CPU adds
2782	  approximately eight kilobytes to the kernel image.  For best
2783	  performance should round up your number of processors to the next
2784	  power of two.
2785
2786config MIPS_PERF_SHARED_TC_COUNTERS
2787	bool
2788
2789config MIPS_NR_CPU_NR_MAP_1024
2790	bool
2791
2792config MIPS_NR_CPU_NR_MAP
2793	int
2794	depends on SMP
2795	default 1024 if MIPS_NR_CPU_NR_MAP_1024
2796	default NR_CPUS if !MIPS_NR_CPU_NR_MAP_1024
2797
2798#
2799# Timer Interrupt Frequency Configuration
2800#
2801
2802choice
2803	prompt "Timer frequency"
2804	default HZ_250
2805	help
2806	  Allows the configuration of the timer frequency.
2807
2808	config HZ_24
2809		bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
2810
2811	config HZ_48
2812		bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
2813
2814	config HZ_100
2815		bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
2816
2817	config HZ_128
2818		bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
2819
2820	config HZ_250
2821		bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
2822
2823	config HZ_256
2824		bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
2825
2826	config HZ_1000
2827		bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
2828
2829	config HZ_1024
2830		bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
2831
2832endchoice
2833
2834config SYS_SUPPORTS_24HZ
2835	bool
2836
2837config SYS_SUPPORTS_48HZ
2838	bool
2839
2840config SYS_SUPPORTS_100HZ
2841	bool
2842
2843config SYS_SUPPORTS_128HZ
2844	bool
2845
2846config SYS_SUPPORTS_250HZ
2847	bool
2848
2849config SYS_SUPPORTS_256HZ
2850	bool
2851
2852config SYS_SUPPORTS_1000HZ
2853	bool
2854
2855config SYS_SUPPORTS_1024HZ
2856	bool
2857
2858config SYS_SUPPORTS_ARBIT_HZ
2859	bool
2860	default y if !SYS_SUPPORTS_24HZ && \
2861		     !SYS_SUPPORTS_48HZ && \
2862		     !SYS_SUPPORTS_100HZ && \
2863		     !SYS_SUPPORTS_128HZ && \
2864		     !SYS_SUPPORTS_250HZ && \
2865		     !SYS_SUPPORTS_256HZ && \
2866		     !SYS_SUPPORTS_1000HZ && \
2867		     !SYS_SUPPORTS_1024HZ
2868
2869config HZ
2870	int
2871	default 24 if HZ_24
2872	default 48 if HZ_48
2873	default 100 if HZ_100
2874	default 128 if HZ_128
2875	default 250 if HZ_250
2876	default 256 if HZ_256
2877	default 1000 if HZ_1000
2878	default 1024 if HZ_1024
2879
2880config SCHED_HRTICK
2881	def_bool HIGH_RES_TIMERS
2882
2883config ARCH_SUPPORTS_KEXEC
2884	def_bool y
2885
2886config ARCH_SUPPORTS_CRASH_DUMP
2887	def_bool y
2888
2889config PHYSICAL_START
2890	hex "Physical address where the kernel is loaded"
2891	default "0xffffffff84000000"
2892	depends on CRASH_DUMP
2893	help
2894	  This gives the CKSEG0 or KSEG0 address where the kernel is loaded.
2895	  If you plan to use kernel for capturing the crash dump change
2896	  this value to start of the reserved region (the "X" value as
2897	  specified in the "crashkernel=YM@XM" command line boot parameter
2898	  passed to the panic-ed kernel).
2899
2900config MIPS_O32_FP64_SUPPORT
2901	bool "Support for O32 binaries using 64-bit FP" if !CPU_MIPSR6
2902	depends on 32BIT || MIPS32_O32
2903	help
2904	  When this is enabled, the kernel will support use of 64-bit floating
2905	  point registers with binaries using the O32 ABI along with the
2906	  EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On
2907	  32-bit MIPS systems this support is at the cost of increasing the
2908	  size and complexity of the compiled FPU emulator. Thus if you are
2909	  running a MIPS32 system and know that none of your userland binaries
2910	  will require 64-bit floating point, you may wish to reduce the size
2911	  of your kernel & potentially improve FP emulation performance by
2912	  saying N here.
2913
2914	  Although binutils currently supports use of this flag the details
2915	  concerning its effect upon the O32 ABI in userland are still being
2916	  worked on. In order to avoid userland becoming dependent upon current
2917	  behaviour before the details have been finalised, this option should
2918	  be considered experimental and only enabled by those working upon
2919	  said details.
2920
2921	  If unsure, say N.
2922
2923config USE_OF
2924	bool
2925	select OF
2926	select OF_EARLY_FLATTREE
2927	select IRQ_DOMAIN
2928
2929config UHI_BOOT
2930	bool
2931
2932config BUILTIN_DTB
2933	bool
2934
2935choice
2936	prompt "Kernel appended dtb support" if USE_OF
2937	default MIPS_NO_APPENDED_DTB
2938
2939	config MIPS_NO_APPENDED_DTB
2940		bool "None"
2941		help
2942		  Do not enable appended dtb support.
2943
2944	config MIPS_ELF_APPENDED_DTB
2945		bool "vmlinux"
2946		help
2947		  With this option, the boot code will look for a device tree binary
2948		  DTB) included in the vmlinux ELF section .appended_dtb. By default
2949		  it is empty and the DTB can be appended using binutils command
2950		  objcopy:
2951
2952		    objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
2953
2954		  This is meant as a backward compatibility convenience for those
2955		  systems with a bootloader that can't be upgraded to accommodate
2956		  the documented boot protocol using a device tree.
2957
2958	config MIPS_RAW_APPENDED_DTB
2959		bool "vmlinux.bin or vmlinuz.bin"
2960		help
2961		  With this option, the boot code will look for a device tree binary
2962		  DTB) appended to raw vmlinux.bin or vmlinuz.bin.
2963		  (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
2964
2965		  This is meant as a backward compatibility convenience for those
2966		  systems with a bootloader that can't be upgraded to accommodate
2967		  the documented boot protocol using a device tree.
2968
2969		  Beware that there is very little in terms of protection against
2970		  this option being confused by leftover garbage in memory that might
2971		  look like a DTB header after a reboot if no actual DTB is appended
2972		  to vmlinux.bin.  Do not leave this option active in a production kernel
2973		  if you don't intend to always append a DTB.
2974endchoice
2975
2976choice
2977	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
2978	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
2979					 !MACH_LOONGSON64 && !MIPS_MALTA && \
2980					 !CAVIUM_OCTEON_SOC
2981	default MIPS_CMDLINE_FROM_BOOTLOADER
2982
2983	config MIPS_CMDLINE_FROM_DTB
2984		depends on USE_OF
2985		bool "Dtb kernel arguments if available"
2986
2987	config MIPS_CMDLINE_DTB_EXTEND
2988		depends on USE_OF
2989		bool "Extend dtb kernel arguments with bootloader arguments"
2990
2991	config MIPS_CMDLINE_FROM_BOOTLOADER
2992		bool "Bootloader kernel arguments if available"
2993
2994	config MIPS_CMDLINE_BUILTIN_EXTEND
2995		depends on CMDLINE_BOOL
2996		bool "Extend builtin kernel arguments with bootloader arguments"
2997endchoice
2998
2999endmenu
3000
3001config LOCKDEP_SUPPORT
3002	bool
3003	default y
3004
3005config STACKTRACE_SUPPORT
3006	bool
3007	default y
3008
3009config PGTABLE_LEVELS
3010	int
3011	default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
3012	default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
3013	default 2
3014
3015config MIPS_AUTO_PFN_OFFSET
3016	bool
3017
3018menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
3019
3020config PCI_DRIVERS_GENERIC
3021	select PCI_DOMAINS_GENERIC if PCI
3022	bool
3023
3024config PCI_DRIVERS_LEGACY
3025	def_bool !PCI_DRIVERS_GENERIC
3026	select NO_GENERIC_PCI_IOPORT_MAP
3027	select PCI_DOMAINS if PCI
3028
3029#
3030# ISA support is now enabled via select.  Too many systems still have the one
3031# or other ISA chip on the board that users don't know about so don't expect
3032# users to choose the right thing ...
3033#
3034config ISA
3035	bool
3036
3037config TC
3038	bool "TURBOchannel support"
3039	depends on MACH_DECSTATION
3040	help
3041	  TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
3042	  processors.  TURBOchannel programming specifications are available
3043	  at:
3044	  <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/>
3045	  and:
3046	  <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/>
3047	  Linux driver support status is documented at:
3048	  <http://www.linux-mips.org/wiki/DECstation>
3049
3050config MMU
3051	bool
3052	default y
3053
3054config ARCH_MMAP_RND_BITS_MIN
3055	default 12 if 64BIT
3056	default 8
3057
3058config ARCH_MMAP_RND_BITS_MAX
3059	default 18 if 64BIT
3060	default 15
3061
3062config ARCH_MMAP_RND_COMPAT_BITS_MIN
3063	default 8
3064
3065config ARCH_MMAP_RND_COMPAT_BITS_MAX
3066	default 15
3067
3068config I8253
3069	bool
3070	select CLKSRC_I8253
3071	select CLKEVT_I8253
3072	select MIPS_EXTERNAL_TIMER
3073endmenu
3074
3075config TRAD_SIGNALS
3076	bool
3077
3078config MIPS32_COMPAT
3079	bool
3080
3081config COMPAT
3082	bool
3083
3084config MIPS32_O32
3085	bool "Kernel support for o32 binaries"
3086	depends on 64BIT
3087	select ARCH_WANT_OLD_COMPAT_IPC
3088	select COMPAT
3089	select MIPS32_COMPAT
3090	help
3091	  Select this option if you want to run o32 binaries.  These are pure
3092	  32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
3093	  existing binaries are in this format.
3094
3095	  If unsure, say Y.
3096
3097config MIPS32_N32
3098	bool "Kernel support for n32 binaries"
3099	depends on 64BIT
3100	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
3101	select COMPAT
3102	select MIPS32_COMPAT
3103	help
3104	  Select this option if you want to run n32 binaries.  These are
3105	  64-bit binaries using 32-bit quantities for addressing and certain
3106	  data that would normally be 64-bit.  They are used in special
3107	  cases.
3108
3109	  If unsure, say N.
3110
3111config CC_HAS_MNO_BRANCH_LIKELY
3112	def_bool y
3113	depends on $(cc-option,-mno-branch-likely)
3114
3115# https://github.com/llvm/llvm-project/issues/61045
3116config CC_HAS_BROKEN_INLINE_COMPAT_BRANCH
3117	def_bool y if CC_IS_CLANG
3118
3119menu "Power management options"
3120
3121config ARCH_HIBERNATION_POSSIBLE
3122	def_bool y
3123	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
3124
3125config ARCH_SUSPEND_POSSIBLE
3126	def_bool y
3127	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
3128
3129source "kernel/power/Kconfig"
3130
3131endmenu
3132
3133config MIPS_EXTERNAL_TIMER
3134	bool
3135
3136menu "CPU Power Management"
3137
3138if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
3139source "drivers/cpufreq/Kconfig"
3140endif # CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
3141
3142source "drivers/cpuidle/Kconfig"
3143
3144endmenu
3145
3146source "arch/mips/kvm/Kconfig"
3147
3148source "arch/mips/vdso/Kconfig"
3149