1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Timer subsystem related configuration options
4#
5
6# Options selectable by arch Kconfig
7
8# Watchdog function for clocksources to detect instabilities
9config CLOCKSOURCE_WATCHDOG
10	bool
11
12# Architecture has extra clocksource data
13config ARCH_CLOCKSOURCE_DATA
14	bool
15
16# Architecture has extra clocksource init called from registration
17config ARCH_CLOCKSOURCE_INIT
18	bool
19
20# Clocksources require validation of the clocksource against the last
21# cycle update - x86/TSC misfeature
22config CLOCKSOURCE_VALIDATE_LAST_CYCLE
23	bool
24
25# Timekeeping vsyscall support
26config GENERIC_TIME_VSYSCALL
27	bool
28
29# The generic clock events infrastructure
30config GENERIC_CLOCKEVENTS
31	def_bool !LEGACY_TIMER_TICK
32
33# Architecture can handle broadcast in a driver-agnostic way
34config ARCH_HAS_TICK_BROADCAST
35	bool
36
37# Clockevents broadcasting infrastructure
38config GENERIC_CLOCKEVENTS_BROADCAST
39	bool
40	depends on GENERIC_CLOCKEVENTS
41
42# Automatically adjust the min. reprogramming time for
43# clock event device
44config GENERIC_CLOCKEVENTS_MIN_ADJUST
45	bool
46
47# Generic update of CMOS clock
48config GENERIC_CMOS_UPDATE
49	bool
50
51# Select to handle posix CPU timers from task_work
52# and not from the timer interrupt context
53config HAVE_POSIX_CPU_TIMERS_TASK_WORK
54	bool
55
56config POSIX_CPU_TIMERS_TASK_WORK
57	bool
58	default y if POSIX_TIMERS && HAVE_POSIX_CPU_TIMERS_TASK_WORK
59
60config LEGACY_TIMER_TICK
61	bool
62	help
63	  The legacy timer tick helper is used by platforms that
64	  lack support for the generic clockevent framework.
65	  New platforms should use generic clockevents instead.
66
67config TIME_KUNIT_TEST
68	tristate "KUnit test for kernel/time functions" if !KUNIT_ALL_TESTS
69	depends on KUNIT
70	default KUNIT_ALL_TESTS
71	help
72	  Enable this option to test RTC library functions.
73
74	  If unsure, say N.
75
76config CONTEXT_TRACKING
77	bool
78
79config CONTEXT_TRACKING_IDLE
80	bool
81	select CONTEXT_TRACKING
82	help
83	  Tracks idle state on behalf of RCU.
84
85if GENERIC_CLOCKEVENTS
86menu "Timers subsystem"
87
88# Core internal switch. Selected by NO_HZ_COMMON / HIGH_RES_TIMERS. This is
89# only related to the tick functionality. Oneshot clockevent devices
90# are supported independent of this.
91config TICK_ONESHOT
92	bool
93
94config NO_HZ_COMMON
95	bool
96	select TICK_ONESHOT
97
98choice
99	prompt "Timer tick handling"
100	default NO_HZ_IDLE if NO_HZ
101
102config HZ_PERIODIC
103	bool "Periodic timer ticks (constant rate, no dynticks)"
104	help
105	  This option keeps the tick running periodically at a constant
106	  rate, even when the CPU doesn't need it.
107
108config NO_HZ_IDLE
109	bool "Idle dynticks system (tickless idle)"
110	select NO_HZ_COMMON
111	help
112	  This option enables a tickless idle system: timer interrupts
113	  will only trigger on an as-needed basis when the system is idle.
114	  This is usually interesting for energy saving.
115
116	  Most of the time you want to say Y here.
117
118config NO_HZ_FULL
119	bool "Full dynticks system (tickless)"
120	# NO_HZ_COMMON dependency
121	# We need at least one periodic CPU for timekeeping
122	depends on SMP
123	depends on HAVE_CONTEXT_TRACKING_USER
124	# VIRT_CPU_ACCOUNTING_GEN dependency
125	depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
126	select NO_HZ_COMMON
127	select RCU_NOCB_CPU
128	select VIRT_CPU_ACCOUNTING_GEN
129	select IRQ_WORK
130	select CPU_ISOLATION
131	help
132	 Adaptively try to shutdown the tick whenever possible, even when
133	 the CPU is running tasks. Typically this requires running a single
134	 task on the CPU. Chances for running tickless are maximized when
135	 the task mostly runs in userspace and has few kernel activity.
136
137	 You need to fill up the nohz_full boot parameter with the
138	 desired range of dynticks CPUs to use it. This is implemented at
139	 the expense of some overhead in user <-> kernel transitions:
140	 syscalls, exceptions and interrupts.
141
142	 By default, without passing the nohz_full parameter, this behaves just
143	 like NO_HZ_IDLE.
144
145	 If you're a distro say Y.
146
147endchoice
148
149config CONTEXT_TRACKING_USER
150	bool
151	depends on HAVE_CONTEXT_TRACKING_USER
152	select CONTEXT_TRACKING
153	help
154	  Track transitions between kernel and user on behalf of RCU and
155	  tickless cputime accounting. The former case relies on context
156	  tracking to enter/exit RCU extended quiescent states.
157
158config CONTEXT_TRACKING_USER_FORCE
159	bool "Force user context tracking"
160	depends on CONTEXT_TRACKING_USER
161	default y if !NO_HZ_FULL
162	help
163	  The major pre-requirement for full dynticks to work is to
164	  support the user context tracking subsystem. But there are also
165	  other dependencies to provide in order to make the full
166	  dynticks working.
167
168	  This option stands for testing when an arch implements the
169	  user context tracking backend but doesn't yet fulfill all the
170	  requirements to make the full dynticks feature working.
171	  Without the full dynticks, there is no way to test the support
172	  for user context tracking and the subsystems that rely on it: RCU
173	  userspace extended quiescent state and tickless cputime
174	  accounting. This option copes with the absence of the full
175	  dynticks subsystem by forcing the user context tracking on all
176	  CPUs in the system.
177
178	  Say Y only if you're working on the development of an
179	  architecture backend for the user context tracking.
180
181	  Say N otherwise, this option brings an overhead that you
182	  don't want in production.
183
184config NO_HZ
185	bool "Old Idle dynticks config"
186	help
187	  This is the old config entry that enables dynticks idle.
188	  We keep it around for a little while to enforce backward
189	  compatibility with older config files.
190
191config HIGH_RES_TIMERS
192	bool "High Resolution Timer Support"
193	select TICK_ONESHOT
194	help
195	  This option enables high resolution timer support. If your
196	  hardware is not capable then this option only increases
197	  the size of the kernel image.
198
199config CLOCKSOURCE_WATCHDOG_MAX_SKEW_US
200	int "Clocksource watchdog maximum allowable skew (in μs)"
201	depends on CLOCKSOURCE_WATCHDOG
202	range 50 1000
203	default 125
204	help
205	  Specify the maximum amount of allowable watchdog skew in
206	  microseconds before reporting the clocksource to be unstable.
207	  The default is based on a half-second clocksource watchdog
208	  interval and NTP's maximum frequency drift of 500 parts
209	  per million.	If the clocksource is good enough for NTP,
210	  it is good enough for the clocksource watchdog!
211
212endmenu
213endif
214