1#
2# PCCARD (PCMCIA/CardBus) bus subsystem configuration
3#
4
5menuconfig PCCARD
6	tristate "PCCard (PCMCIA/CardBus) support"
7	depends on HOTPLUG
8	---help---
9	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
10	  computer.  These are credit-card size devices such as network cards,
11	  modems or hard drives often used with laptops computers.  There are
12	  actually two varieties of these cards: 16 bit PCMCIA and 32 bit
13	  CardBus cards.
14
15	  To compile this driver as modules, choose M here: the
16	  module will be called pcmcia_core.
17
18if PCCARD
19
20config PCMCIA
21	tristate "16-bit PCMCIA support"
22	select CRC32
23	default y
24	---help---
25	   This option enables support for 16-bit PCMCIA cards. Most older
26	   PC-cards are such 16-bit PCMCIA cards, so unless you know you're
27	   only using 32-bit CardBus cards, say Y or M here.
28
29	   To use 16-bit PCMCIA cards, you will need supporting software in
30	   most cases. (see the file <file:Documentation/Changes> for
31	   location and details).
32
33	   To compile this driver as modules, choose M here: the
34	   module will be called pcmcia.
35
36	   If unsure, say Y.
37
38config PCMCIA_LOAD_CIS
39	bool "Load CIS updates from userspace (EXPERIMENTAL)"
40	depends on PCMCIA && EXPERIMENTAL
41	select FW_LOADER
42	default y
43	help
44	  Some PCMCIA cards require an updated Card Information Structure (CIS)
45	  to be loaded from userspace to work correctly. If you say Y here,
46	  and your userspace is arranged correctly, this will be loaded
47	  automatically using the in-kernel firmware loader and the hotplug
48	  subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
49
50	  If unsure, say Y.
51
52config CARDBUS
53	bool "32-bit CardBus support"
54	depends on PCI
55	default y
56	---help---
57	  CardBus is a bus mastering architecture for PC-cards, which allows
58	  for 32 bit PC-cards (the original PCMCIA standard specifies only
59	  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
60
61	  To use 32 bit PC-cards, you also need a CardBus compatible host
62	  bridge. Virtually all modern PCMCIA bridges do this, and most of
63	  them are "yenta-compatible", so say Y or M there, too.
64
65	  If unsure, say Y.
66
67comment "PC-card bridges"
68
69config YENTA
70	tristate "CardBus yenta-compatible bridge support"
71	depends on PCI
72	select CARDBUS if !EXPERT
73	select PCCARD_NONSTATIC if PCMCIA != n
74	---help---
75	  This option enables support for CardBus host bridges.  Virtually
76	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
77	  the hardware inside your computer that PCMCIA cards are plugged
78	  into.
79
80	  To compile this driver as modules, choose M here: the
81	  module will be called yenta_socket.
82
83	  If unsure, say Y.
84
85config YENTA_O2
86	default y
87	bool "Special initialization for O2Micro bridges" if EXPERT
88	depends on YENTA
89
90config YENTA_RICOH
91	default y
92	bool "Special initialization for Ricoh bridges" if EXPERT
93	depends on YENTA
94
95config YENTA_TI
96	default y
97	bool "Special initialization for TI and EnE bridges" if EXPERT
98	depends on YENTA
99
100config YENTA_ENE_TUNE
101	default y
102	bool "Auto-tune EnE bridges for CB cards" if EXPERT
103	depends on YENTA_TI && CARDBUS
104
105config YENTA_TOSHIBA
106	default y
107	bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
108	depends on YENTA
109
110config PD6729
111	tristate "Cirrus PD6729 compatible bridge support"
112	depends on PCMCIA && PCI
113	select PCCARD_NONSTATIC
114	help
115	  This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
116	  device, found in some older laptops and PCMCIA card readers.
117
118config I82092
119	tristate "i82092 compatible bridge support"
120	depends on PCMCIA && PCI
121	select PCCARD_NONSTATIC
122	help
123	  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
124	  found in some older laptops and more commonly in evaluation boards for the
125	  chip.
126
127config I82365
128	tristate "i82365 compatible bridge support"
129	depends on PCMCIA && ISA
130	select PCCARD_NONSTATIC
131	help
132	  Say Y here to include support for ISA-bus PCMCIA host bridges that
133	  are register compatible with the Intel i82365.  These are found on
134	  older laptops and ISA-bus card readers for desktop systems.  A
135	  "bridge" is the hardware inside your computer that PCMCIA cards are
136	  plugged into. If unsure, say N.
137
138config TCIC
139	tristate "Databook TCIC host bridge support"
140	depends on PCMCIA && ISA
141	select PCCARD_NONSTATIC
142	help
143	  Say Y here to include support for the Databook TCIC family of PCMCIA
144	  host bridges. These are only found on a handful of old systems.
145	  "Bridge" is the name used for the hardware inside your computer that
146	  PCMCIA cards are plugged into. If unsure, say N.
147
148config PCMCIA_M8XX
149	tristate "MPC8xx PCMCIA support"
150	depends on PCCARD && PPC && 8xx
151	select PCCARD_IODYN if PCMCIA != n
152	help
153	  Say Y here to include support for PowerPC 8xx series PCMCIA
154	  controller.
155
156	  This driver is also available as a module called m8xx_pcmcia.
157
158config PCMCIA_AU1X00
159	tristate "Au1x00 pcmcia support"
160	depends on MIPS_ALCHEMY && PCMCIA
161
162config PCMCIA_ALCHEMY_DEVBOARD
163	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
164	depends on MIPS_ALCHEMY && PCMCIA
165	select 64BIT_PHYS_ADDR
166	help
167	  Enable this driver of you want PCMCIA support on your Alchemy
168	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
169	  NOT suitable for the PB1000!
170
171	  This driver is also available as a module called db1xxx_ss.ko
172
173config PCMCIA_XXS1500
174	tristate "MyCable XXS1500 PCMCIA socket support"
175	depends on PCMCIA && MIPS_XXS1500
176	select 64BIT_PHYS_ADDR
177	help
178	  Support for the PCMCIA/CF socket interface on MyCable XXS1500
179	  systems.
180
181	  This driver is also available as a module called xxs1500_ss.ko
182
183config PCMCIA_BCM63XX
184	tristate "bcm63xx pcmcia support"
185	depends on BCM63XX && PCMCIA
186
187config PCMCIA_SOC_COMMON
188	tristate
189
190config PCMCIA_SA1100
191	tristate "SA1100 support"
192	depends on ARM && ARCH_SA1100 && PCMCIA
193	select PCMCIA_SOC_COMMON
194	help
195	  Say Y here to include support for SA11x0-based PCMCIA or CF
196	  sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
197	  Xscale(R) embedded machines.
198
199	  This driver is also available as a module called sa1100_cs.
200
201config PCMCIA_SA1111
202	tristate "SA1111 support"
203	depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
204	select PCMCIA_SOC_COMMON
205	help
206	  Say Y  here to include support for SA1111-based PCMCIA or CF
207	  sockets, found on the Jornada 720, Graphicsmaster and other
208	  StrongARM(R)/Xscale(R) embedded machines.
209
210	  This driver is also available as a module called sa1111_cs.
211
212config PCMCIA_PXA2XX
213	tristate "PXA2xx support"
214	depends on ARM && ARCH_PXA && PCMCIA
215	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
216		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
217		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
218		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
219		    || MACH_COLIBRI320)
220	select PCMCIA_SOC_COMMON
221	help
222	  Say Y here to include support for the PXA2xx PCMCIA controller
223
224config PCMCIA_DEBUG
225	bool "Enable debugging"
226	depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
227	help
228	  Say Y here to enable debugging for the SoC PCMCIA layer.
229	  You will need to choose the debugging level either via the
230	  kernel command line, or module options depending whether
231	  you build the drivers as modules.
232
233	  The kernel command line options are:
234	    sa11xx_core.pc_debug=N
235	    pxa2xx_core.pc_debug=N
236
237	  The module option is called pc_debug=N
238
239	  In all the above examples, N is the debugging verbosity
240	  level.
241
242config PCMCIA_PROBE
243	bool
244	default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
245
246config M32R_PCC
247	bool "M32R PCMCIA I/F"
248	depends on M32R && CHIP_M32700 && PCMCIA
249	help
250	  Say Y here to use the M32R PCMCIA controller.
251
252config M32R_CFC
253	bool "M32R CF I/F Controller"
254	depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
255	help
256	  Say Y here to use the M32R CompactFlash controller.
257
258config M32R_CFC_NUM
259	int "M32R CF I/F number"
260	depends on M32R_CFC
261	default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
262	help
263	  Set the number of M32R CF slots.
264
265config PCMCIA_VRC4171
266	tristate "NEC VRC4171 Card Controllers support"
267	depends on CPU_VR41XX && ISA && PCMCIA
268
269config PCMCIA_VRC4173
270	tristate "NEC VRC4173 CARDU support"
271	depends on CPU_VR41XX && PCI && PCMCIA
272
273config OMAP_CF
274	tristate "OMAP CompactFlash Controller"
275	depends on PCMCIA && ARCH_OMAP16XX
276	help
277	  Say Y here to support the CompactFlash controller on OMAP.
278	  Note that this doesn't support "True IDE" mode.
279
280config BFIN_CFPCMCIA
281	tristate "Blackfin CompactFlash PCMCIA Driver"
282	depends on PCMCIA && BLACKFIN
283	help
284	  Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
285
286
287config AT91_CF
288	tristate "AT91 CompactFlash Controller"
289	depends on PCMCIA && ARCH_AT91RM9200
290	help
291	  Say Y here to support the CompactFlash controller on AT91 chips.
292	  Or choose M to compile the driver as a module named "at91_cf".
293
294config ELECTRA_CF
295	tristate "Electra CompactFlash Controller"
296	depends on PCMCIA && PPC_PASEMI
297	help
298	  Say Y here to support the CompactFlash controller on the
299	  PA Semi Electra eval board.
300
301config PCCARD_NONSTATIC
302	bool
303
304config PCCARD_IODYN
305	bool
306
307endif	# PCCARD
308