1#
2# ACPI Configuration
3#
4
5menuconfig ACPI
6	bool "ACPI (Advanced Configuration and Power Interface) Support"
7	depends on !IA64_HP_SIM
8	depends on IA64 || X86
9	depends on PCI
10	select PNP
11	default y
12	help
13	  Advanced Configuration and Power Interface (ACPI) support for
14	  Linux requires an ACPI-compliant platform (hardware/firmware),
15	  and assumes the presence of OS-directed configuration and power
16	  management (OSPM) software.  This option will enlarge your
17	  kernel by about 70K.
18
19	  Linux ACPI provides a robust functional replacement for several
20	  legacy configuration and power management interfaces, including
21	  the Plug-and-Play BIOS specification (PnP BIOS), the
22	  MultiProcessor Specification (MPS), and the Advanced Power
23	  Management (APM) specification.  If both ACPI and APM support
24	  are configured, ACPI is used.
25
26	  The project home page for the Linux ACPI subsystem is here:
27	  <http://www.lesswatts.org/projects/acpi/>
28
29	  Linux support for ACPI is based on Intel Corporation's ACPI
30	  Component Architecture (ACPI CA).  For more information on the
31	  ACPI CA, see:
32	  <http://acpica.org/>
33
34	  ACPI is an open industry specification co-developed by
35	  Hewlett-Packard, Intel, Microsoft, Phoenix, and Toshiba.
36	  The specification is available at:
37	  <http://www.acpi.info>
38
39if ACPI
40
41config ACPI_SLEEP
42	bool
43	depends on SUSPEND || HIBERNATION
44	default y
45
46config ACPI_PROCFS
47	bool "Deprecated /proc/acpi files"
48	depends on PROC_FS
49	help
50	  For backwards compatibility, this option allows
51	  deprecated /proc/acpi/ files to exist, even when
52	  they have been replaced by functions in /sys.
53
54	  This option has no effect on /proc/acpi/ files
55	  and functions which do not yet exist in /sys.
56
57	  Say N to delete /proc/acpi/ files that have moved to /sys/
58
59config ACPI_PROCFS_POWER
60	bool "Deprecated power /proc/acpi directories"
61	depends on PROC_FS
62	help
63	  For backwards compatibility, this option allows
64          deprecated power /proc/acpi/ directories to exist, even when
65          they have been replaced by functions in /sys.
66          The deprecated directories (and their replacements) include:
67	  /proc/acpi/battery/* (/sys/class/power_supply/*)
68	  /proc/acpi/ac_adapter/* (sys/class/power_supply/*)
69	  This option has no effect on /proc/acpi/ directories
70	  and functions, which do not yet exist in /sys
71	  This option, together with the proc directories, will be
72	  deleted in 2.6.39.
73
74	  Say N to delete power /proc/acpi/ directories that have moved to /sys/
75
76config ACPI_EC_DEBUGFS
77	tristate "EC read/write access through /sys/kernel/debug/ec"
78	default n
79	help
80	  Say N to disable Embedded Controller /sys/kernel/debug interface
81
82	  Be aware that using this interface can confuse your Embedded
83	  Controller in a way that a normal reboot is not enough. You then
84	  have to power off your system, and remove the laptop battery for
85	  some seconds.
86	  An Embedded Controller typically is available on laptops and reads
87	  sensor values like battery state and temperature.
88	  The kernel accesses the EC through ACPI parsed code provided by BIOS
89	  tables. This option allows to access the EC directly without ACPI
90	  code being involved.
91	  Thus this option is a debug option that helps to write ACPI drivers
92	  and can be used to identify ACPI code or EC firmware bugs.
93
94config ACPI_PROC_EVENT
95	bool "Deprecated /proc/acpi/event support"
96	depends on PROC_FS
97	default y
98	help
99	  A user-space daemon, acpid, typically reads /proc/acpi/event
100	  and handles all ACPI-generated events.
101
102	  These events are now delivered to user-space either
103	  via the input layer or as netlink events.
104
105	  This build option enables the old code for legacy
106	  user-space implementation.  After some time, this will
107	  be moved under CONFIG_ACPI_PROCFS, and then deleted.
108
109	  Say Y here to retain the old behaviour.  Say N if your
110	  user-space is newer than kernel 2.6.23 (September 2007).
111
112config ACPI_AC
113	tristate "AC Adapter"
114	depends on X86
115	select POWER_SUPPLY
116	default y
117	help
118	  This driver supports the AC Adapter object, which indicates
119	  whether a system is on AC or not.  If you have a system that can
120	  switch between A/C and battery, say Y.
121
122	  To compile this driver as a module, choose M here:
123	  the module will be called ac.
124
125config ACPI_BATTERY
126	tristate "Battery"
127	depends on X86
128	select POWER_SUPPLY
129	default y
130	help
131	  This driver adds support for battery information through
132	  /proc/acpi/battery. If you have a mobile system with a battery,
133	  say Y.
134
135	  To compile this driver as a module, choose M here:
136	  the module will be called battery.
137
138config ACPI_BUTTON
139	tristate "Button"
140	depends on INPUT
141	default y
142	help
143	  This driver handles events on the power, sleep, and lid buttons.
144	  A daemon reads /proc/acpi/event and perform user-defined actions
145	  such as shutting down the system.  This is necessary for
146	  software-controlled poweroff.
147
148	  To compile this driver as a module, choose M here:
149	  the module will be called button.
150
151config ACPI_VIDEO
152	tristate "Video"
153	depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL
154	depends on INPUT
155	select THERMAL
156	help
157	  This driver implements the ACPI Extensions For Display Adapters
158	  for integrated graphics devices on motherboard, as specified in
159	  ACPI 2.0 Specification, Appendix B.  This supports basic operations
160	  such as defining the video POST device, retrieving EDID information,
161	  and setting up a video output.
162
163	  To compile this driver as a module, choose M here:
164	  the module will be called video.
165
166config ACPI_FAN
167	tristate "Fan"
168	select THERMAL
169	default y
170	help
171	  This driver supports ACPI fan devices, allowing user-mode
172	  applications to perform basic fan control (on, off, status).
173
174	  To compile this driver as a module, choose M here:
175	  the module will be called fan.
176
177config ACPI_DOCK
178	bool "Dock"
179	depends on EXPERIMENTAL
180	help
181	  This driver supports ACPI-controlled docking stations and removable
182	  drive bays such as the IBM Ultrabay and the Dell Module Bay.
183
184config ACPI_PROCESSOR
185	tristate "Processor"
186	select THERMAL
187	select CPU_IDLE
188	default y
189	help
190	  This driver installs ACPI as the idle handler for Linux and uses
191	  ACPI C2 and C3 processor states to save power on systems that
192	  support it.  It is required by several flavors of cpufreq
193	  performance-state drivers.
194
195	  To compile this driver as a module, choose M here:
196	  the module will be called processor.
197config ACPI_IPMI
198	tristate "IPMI"
199	depends on EXPERIMENTAL && IPMI_SI && IPMI_HANDLER
200	default n
201	help
202	  This driver enables the ACPI to access the BMC controller. And it
203	  uses the IPMI request/response message to communicate with BMC
204	  controller, which can be found on on the server.
205
206	  To compile this driver as a module, choose M here:
207	  the module will be called as acpi_ipmi.
208
209config ACPI_HOTPLUG_CPU
210	bool
211	depends on ACPI_PROCESSOR && HOTPLUG_CPU
212	select ACPI_CONTAINER
213	default y
214
215config ACPI_PROCESSOR_AGGREGATOR
216	tristate "Processor Aggregator"
217	depends on ACPI_PROCESSOR
218	depends on EXPERIMENTAL
219	depends on X86
220	help
221	  ACPI 4.0 defines processor Aggregator, which enables OS to perform
222	  specific processor configuration and control that applies to all
223	  processors in the platform. Currently only logical processor idling
224	  is defined, which is to reduce power consumption. This driver
225	  supports the new device.
226
227config ACPI_THERMAL
228	tristate "Thermal Zone"
229	depends on ACPI_PROCESSOR
230	select THERMAL
231	default y
232	help
233	  This driver supports ACPI thermal zones.  Most mobile and
234	  some desktop systems support ACPI thermal zones.  It is HIGHLY
235	  recommended that this option be enabled, as your processor(s)
236	  may be damaged without it.
237
238	  To compile this driver as a module, choose M here:
239	  the module will be called thermal.
240
241config ACPI_NUMA
242	bool "NUMA support"
243	depends on NUMA
244	depends on (X86 || IA64)
245	default y if IA64_GENERIC || IA64_SGI_SN2
246
247config ACPI_CUSTOM_DSDT_FILE
248	string "Custom DSDT Table file to include"
249	default ""
250	depends on !STANDALONE
251	help
252	  This option supports a custom DSDT by linking it into the kernel.
253	  See Documentation/acpi/dsdt-override.txt
254
255	  Enter the full path name to the file which includes the AmlCode
256	  declaration.
257
258	  If unsure, don't enter a file name.
259
260config ACPI_CUSTOM_DSDT
261	bool
262	default ACPI_CUSTOM_DSDT_FILE != ""
263
264config ACPI_BLACKLIST_YEAR
265	int "Disable ACPI for systems before Jan 1st this year" if X86_32
266	default 0
267	help
268	  Enter a 4-digit year, e.g., 2001, to disable ACPI by default
269	  on platforms with DMI BIOS date before January 1st that year.
270	  "acpi=force" can be used to override this mechanism.
271
272	  Enter 0 to disable this mechanism and allow ACPI to
273	  run by default no matter what the year.  (default)
274
275config ACPI_DEBUG
276	bool "Debug Statements"
277	default n
278	help
279	  The ACPI subsystem can produce debug output.  Saying Y enables this
280	  output and increases the kernel size by around 50K.
281
282	  Use the acpi.debug_layer and acpi.debug_level kernel command-line
283	  parameters documented in Documentation/acpi/debug.txt and
284	  Documentation/kernel-parameters.txt to control the type and
285	  amount of debug output.
286
287config ACPI_DEBUG_FUNC_TRACE
288	bool "Additionally enable ACPI function tracing"
289	default n
290	depends on ACPI_DEBUG
291	help
292	  ACPI Debug Statements slow down ACPI processing. Function trace
293	  is about half of the penalty and is rarely useful.
294
295config ACPI_PCI_SLOT
296	tristate "PCI slot detection driver"
297	depends on SYSFS
298	default n
299	help
300	  This driver creates entries in /sys/bus/pci/slots/ for all PCI
301	  slots in the system.  This can help correlate PCI bus addresses,
302	  i.e., segment/bus/device/function tuples, with physical slots in
303	  the system.  If you are unsure, say N.
304
305	  To compile this driver as a module, choose M here:
306	  the module will be called pci_slot.
307
308config X86_PM_TIMER
309	bool "Power Management Timer Support" if EXPERT
310	depends on X86
311	default y
312	help
313	  The Power Management Timer is available on all ACPI-capable,
314	  in most cases even if ACPI is unusable or blacklisted.
315
316	  This timing source is not affected by power management features
317	  like aggressive processor idling, throttling, frequency and/or
318	  voltage scaling, unlike the commonly used Time Stamp Counter
319	  (TSC) timing source.
320
321	  You should nearly always say Y here because many modern
322	  systems require this timer.
323
324config ACPI_CONTAINER
325	tristate "Container and Module Devices (EXPERIMENTAL)"
326	depends on EXPERIMENTAL
327	default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
328	help
329	  This driver supports ACPI Container and Module devices (IDs
330	  ACPI0004, PNP0A05, and PNP0A06).
331
332	  This helps support hotplug of nodes, CPUs, and memory.
333
334	  To compile this driver as a module, choose M here:
335	  the module will be called container.
336
337config ACPI_HOTPLUG_MEMORY
338	tristate "Memory Hotplug"
339	depends on MEMORY_HOTPLUG
340	default n
341	help
342	  This driver supports ACPI memory hotplug.  The driver
343	  fields notifications on ACPI memory devices (PNP0C80),
344	  which represent memory ranges that may be onlined or
345	  offlined during runtime.
346
347	  If your hardware and firmware do not support adding or
348	  removing memory devices at runtime, you need not enable
349	  this driver.
350
351	  To compile this driver as a module, choose M here:
352	  the module will be called acpi_memhotplug.
353
354config ACPI_SBS
355	tristate "Smart Battery System"
356	depends on X86
357	select POWER_SUPPLY
358	help
359	  This driver supports the Smart Battery System, another
360	  type of access to battery information, found on some laptops.
361
362	  To compile this driver as a module, choose M here:
363	  the modules will be called sbs and sbshc.
364
365config ACPI_HED
366	tristate "Hardware Error Device"
367	help
368	  This driver supports the Hardware Error Device (PNP0C33),
369	  which is used to report some hardware errors notified via
370	  SCI, mainly the corrected errors.
371
372config ACPI_CUSTOM_METHOD
373	tristate "Allow ACPI methods to be inserted/replaced at run time"
374	depends on DEBUG_FS
375	default n
376	help
377	  This debug facility allows ACPI AML methods to be inserted and/or
378	  replaced without rebooting the system. For details refer to:
379	  Documentation/acpi/method-customizing.txt.
380
381	  NOTE: This option is security sensitive, because it allows arbitrary
382	  kernel memory to be written to by root (uid=0) users, allowing them
383	  to bypass certain security measures (e.g. if root is not allowed to
384	  load additional kernel modules after boot, this feature may be used
385	  to override that restriction).
386
387config ACPI_BGRT
388        tristate "Boottime Graphics Resource Table support"
389        default n
390        help
391	  This driver adds support for exposing the ACPI Boottime Graphics
392	  Resource Table, which allows the operating system to obtain
393	  data from the firmware boot splash. It will appear under
394	  /sys/firmware/acpi/bgrt/ .
395
396source "drivers/acpi/apei/Kconfig"
397
398endif	# ACPI
399