1 2 // vim:tw=110:ts=4: 3 #ifndef MDD_H 4 #define MDD_H 1 5 6 /************************************************************************************************************* 7 * 8 * FILE : mdd.h 9 * 10 * DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.6 $ 11 * Original : 2004/05/25 05:59:37 Revision: 1.57 Tag: hcf7_t20040602_01 12 * Original : 2004/05/13 15:31:45 Revision: 1.54 Tag: hcf7_t7_20040513_01 13 * Original : 2004/04/15 09:24:41 Revision: 1.47 Tag: hcf7_t7_20040415_01 14 * Original : 2004/04/13 14:22:45 Revision: 1.46 Tag: t7_20040413_01 15 * Original : 2004/04/01 15:32:55 Revision: 1.42 Tag: t7_20040401_01 16 * Original : 2004/03/10 15:39:28 Revision: 1.38 Tag: t20040310_01 17 * Original : 2004/03/04 11:03:37 Revision: 1.36 Tag: t20040304_01 18 * Original : 2004/03/02 09:27:11 Revision: 1.34 Tag: t20040302_03 19 * Original : 2004/02/24 13:00:27 Revision: 1.29 Tag: t20040224_01 20 * Original : 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01 21 * 22 * AUTHOR : Nico Valster 23 * 24 * DESC : Definitions and Prototypes for HCF, DHF, MMD and MSF 25 * 26 *************************************************************************************************************** 27 * 28 * 29 * SOFTWARE LICENSE 30 * 31 * This software is provided subject to the following terms and conditions, 32 * which you should read carefully before using the software. Using this 33 * software indicates your acceptance of these terms and conditions. If you do 34 * not agree with these terms and conditions, do not use the software. 35 * 36 * COPYRIGHT � 1994 - 1995 by AT&T. All Rights Reserved 37 * COPYRIGHT � 1996 - 2000 by Lucent Technologies. All Rights Reserved 38 * COPYRIGHT � 2001 - 2004 by Agere Systems Inc. All Rights Reserved 39 * All rights reserved. 40 * 41 * Redistribution and use in source or binary forms, with or without 42 * modifications, are permitted provided that the following conditions are met: 43 * 44 * . Redistributions of source code must retain the above copyright notice, this 45 * list of conditions and the following Disclaimer as comments in the code as 46 * well as in the documentation and/or other materials provided with the 47 * distribution. 48 * 49 * . Redistributions in binary form must reproduce the above copyright notice, 50 * this list of conditions and the following Disclaimer in the documentation 51 * and/or other materials provided with the distribution. 52 * 53 * . Neither the name of Agere Systems Inc. nor the names of the contributors 54 * may be used to endorse or promote products derived from this software 55 * without specific prior written permission. 56 * 57 * Disclaimer 58 * 59 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 60 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF 61 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY 62 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN 63 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY 64 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 65 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 66 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 67 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT 68 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 69 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 70 * DAMAGE. 71 * 72 * 73 ************************************************************************************************************/ 74 75 76 /************************************************************************************************************ 77 * 78 * The macros Xn(...) and XXn(...) are used to define the LTV's (short for Length Type Value[ ]) , 79 * aka RIDs, processed by the Hermes. 80 * The n in Xn and XXn reflects the number of "Value" fields in these RIDs. 81 * 82 * Xn(...) : Macros used for RIDs which use only type hcf_16 for the "V" fields of the LTV. 83 * Xn takes as parameters a RID name and "n" name(s), one for each of the "V" fields of the LTV. 84 * 85 * XXn(...) : Macros used for RIDs which use at least one other type then hcf_16 for a "V" field 86 * of the LTV. 87 * XXn(..) takes as parameters a RID name and "n" pair(s) of type and name, one for each "V" field 88 * of the LTV 89 90 ****************************************** e x a m p l e s *********************************************** 91 92 * X1(RID_NAME, parameters...) : expands to : 93 * typedef struct RID_NAME_STRCT { 94 * hcf_16 len; 95 * hcf_16 typ; 96 * hcf_16 par1; 97 * } RID_NAME_STRCT; 98 99 * X2(RID_NAME, parameters...) : expands to : 100 * typedef struct RID_NAME_STRCT { 101 * hcf_16 len; 102 * hcf_16 typ; 103 * hcf_16 par1; 104 * hcf_16 par2; 105 * } RID_NAME_STRCT; 106 107 108 * XX1(RID_NAME, par1type, par1name, ...) : expands to : 109 * typedef struct RID_NAME_STRCT { 110 * hcf_16 len; 111 * hcf_16 typ; 112 * par1type par1name; 113 * } RID_NAME_STRCT; 114 115 ************************************************************************************************************/ 116 117 /******************************* XX Sub-macro definitions **************************************************/ 118 119 #define XX1( name, type1, par1 ) \ 120 typedef struct { \ 121 hcf_16 len; \ 122 hcf_16 typ; \ 123 type1 par1; \ 124 } name##_STRCT; 125 126 #define XX2( name, type1, par1, type2, par2 ) \ 127 typedef struct { \ 128 hcf_16 len; \ 129 hcf_16 typ; \ 130 type1 par1; \ 131 type2 par2; \ 132 } name##_STRCT; 133 134 #define XX3( name, type1, par1, type2, par2, type3, par3 ) \ 135 typedef struct name##_STRCT { \ 136 hcf_16 len; \ 137 hcf_16 typ; \ 138 type1 par1; \ 139 type2 par2; \ 140 type3 par3; \ 141 } name##_STRCT; 142 143 #define XX4( name, type1, par1, type2, par2, type3, par3, type4, par4 ) \ 144 typedef struct { \ 145 hcf_16 len; \ 146 hcf_16 typ; \ 147 type1 par1; \ 148 type2 par2; \ 149 type3 par3; \ 150 type4 par4; \ 151 } name##_STRCT; 152 153 #define X1( name, par1 ) \ 154 typedef struct name##_STRCT { \ 155 hcf_16 len; \ 156 hcf_16 typ; \ 157 hcf_16 par1; \ 158 } name##_STRCT; 159 160 #define X2( name, par1, par2 ) \ 161 typedef struct { \ 162 hcf_16 len; \ 163 hcf_16 typ; \ 164 hcf_16 par1; \ 165 hcf_16 par2; \ 166 } name##_STRCT; 167 168 #define X3( name, par1, par2, par3 ) \ 169 typedef struct { \ 170 hcf_16 len; \ 171 hcf_16 typ; \ 172 hcf_16 par1; \ 173 hcf_16 par2; \ 174 hcf_16 par3; \ 175 } name##_STRCT; 176 177 #define X4( name, par1, par2, par3, par4 ) \ 178 typedef struct { \ 179 hcf_16 len; \ 180 hcf_16 typ; \ 181 hcf_16 par1; \ 182 hcf_16 par2; \ 183 hcf_16 par3; \ 184 hcf_16 par4; \ 185 } name##_STRCT; 186 187 #define X5( name, par1, par2, par3, par4, par5 ) \ 188 typedef struct { \ 189 hcf_16 len; \ 190 hcf_16 typ; \ 191 hcf_16 par1; \ 192 hcf_16 par2; \ 193 hcf_16 par3; \ 194 hcf_16 par4; \ 195 hcf_16 par5; \ 196 } name##_STRCT; 197 198 #define X6( name, par1, par2, par3, par4, par5, par6 ) \ 199 typedef struct { \ 200 hcf_16 len; \ 201 hcf_16 typ; \ 202 hcf_16 par1; \ 203 hcf_16 par2; \ 204 hcf_16 par3; \ 205 hcf_16 par4; \ 206 hcf_16 par5; \ 207 hcf_16 par6; \ 208 } name##_STRCT; 209 210 #define X8( name, par1, par2, par3, par4, par5, par6, par7, par8 ) \ 211 typedef struct { \ 212 hcf_16 len; \ 213 hcf_16 typ; \ 214 hcf_16 par1; \ 215 hcf_16 par2; \ 216 hcf_16 par3; \ 217 hcf_16 par4; \ 218 hcf_16 par5; \ 219 hcf_16 par6; \ 220 hcf_16 par7; \ 221 hcf_16 par8; \ 222 } name##_STRCT; 223 224 #define X11( name, par1, par2, par3, par4, par5, par6, par7, par8, par9, par10, par11 ) \ 225 typedef struct { \ 226 hcf_16 len; \ 227 hcf_16 typ; \ 228 hcf_16 par1; \ 229 hcf_16 par2; \ 230 hcf_16 par3; \ 231 hcf_16 par4; \ 232 hcf_16 par5; \ 233 hcf_16 par6; \ 234 hcf_16 par7; \ 235 hcf_16 par8; \ 236 hcf_16 par9; \ 237 hcf_16 par10; \ 238 hcf_16 par11; \ 239 } name##_STRCT; 240 241 /******************************* Substructure definitions **************************************************/ 242 243 //apparently not needed (CFG_CNF_COUNTRY) 244 typedef struct CHANNEL_SET { //channel set structure used in the CFG_CNF_COUNTRY LTV 245 hcf_16 first_channel; 246 hcf_16 number_of_channels; 247 hcf_16 max_tx_output_level; 248 } CHANNEL_SET; 249 250 typedef struct KEY_STRCT { // key structure used in the CFG_DEFAULT_KEYS LTV 251 hcf_16 len; //length of key 252 hcf_8 key[14]; //encryption key 253 } KEY_STRCT; 254 255 typedef struct SCAN_RS_STRCT { // Scan Result structure used in the CFG_SCAN LTV 256 hcf_16 channel_id; 257 hcf_16 noise_level; 258 hcf_16 signal_level; 259 hcf_8 bssid[6]; 260 hcf_16 beacon_interval_time; 261 hcf_16 capability; 262 hcf_16 ssid_len; 263 hcf_8 ssid_val[32]; 264 } SCAN_RS_STRCT; 265 266 typedef struct CFG_RANGE_SPEC_STRCT { // range specification structure used in CFG_RANGES, CFG_RANGE1 etc 267 hcf_16 variant; 268 hcf_16 bottom; 269 hcf_16 top; 270 } CFG_RANGE_SPEC_STRCT; 271 272 typedef struct CFG_RANGE_SPEC_BYTE_STRCT { // byte oriented range specification structure used in CFG_RANGE_B LTV 273 hcf_8 variant[2]; 274 hcf_8 bottom[2]; 275 hcf_8 top[2]; 276 } CFG_RANGE_SPEC_BYTE_STRCT; 277 278 //used to set up "T" functionality for Info frames, i.e. log info frames in MSF supplied buffer and MailBox 279 XX1( RID_LOG, unsigned short FAR*, bufp ) 280 typedef RID_LOG_STRCT FAR *RID_LOGP; 281 XX1( CFG_RID_LOG, RID_LOGP, recordp ) 282 283 X1( LTV, val[1] ) /*minimum LTV proto typ */ 284 X1( LTV_MAX, val[HCF_MAX_LTV] ) /*maximum LTV proto typ */ 285 XX2( CFG_REG_MB, hcf_16* , mb_addr, hcf_16, mb_size ) 286 287 typedef struct CFG_MB_INFO_FRAG { // specification of buffer fragment 288 unsigned short FAR* frag_addr; 289 hcf_16 frag_len; 290 } CFG_MB_INFO_FRAG; 291 292 /* Mail Box Info Block structures, 293 * the base form: CFG_MB_INFO_STRCT 294 * and the derived forms: CFG_MB_INFO_RANGE<n>_STRCT with n is 1, 2, 3 or 20 295 * predefined for a payload of 1, and up to 2, 3 and 20 CFG_MB_INFO_FRAG elements */ 296 XX3( CFG_MB_INFO, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 1] ) 297 XX3( CFG_MB_INFO_RANGE1, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 1] ) 298 XX3( CFG_MB_INFO_RANGE2, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 2] ) 299 XX3( CFG_MB_INFO_RANGE3, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 3] ) 300 XX3( CFG_MB_INFO_RANGE20, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[20] ) 301 302 XX3( CFG_MB_ASSERT, hcf_16, line, hcf_16, trace, hcf_32, qualifier ) /*MBInfoBlock for asserts */ 303 #if (HCF_ASSERT) & ( HCF_ASSERT_LNK_MSF_RTN | HCF_ASSERT_RT_MSF_RTN ) 304 typedef void (MSF_ASSERT_RTN)( unsigned int , hcf_16, hcf_32 ); 305 typedef MSF_ASSERT_RTN /*can't link FAR*/ * MSF_ASSERT_RTNP; 306 /* CFG_REG_ASSERT_RTNP (0x0832) (de-)register MSF Callback routines 307 * lvl: Assert level filtering (not yet implemented) 308 * rtnp: address of MSF_ASSERT_RTN (native Endian format) */ 309 XX2( CFG_REG_ASSERT_RTNP, hcf_16, lvl, MSF_ASSERT_RTNP, rtnp ) 310 #endif // HCF_ASSERT_LNK_MSF_RTN / HCF_ASSERT_RT_MSF_RTN 311 312 X1( CFG_HCF_OPT, val[20] ) /*(Compile time) options */ 313 X3( CFG_CMD_HCF, cmd, mode, add_info ) /*HCF Engineering command */ 314 315 typedef struct { 316 hcf_16 len; 317 hcf_16 typ; 318 hcf_16 mode; // PROG_STOP/VOLATILE [FLASH/SEEPROM/SEEPROM_READBACK] 319 hcf_16 segment_size; // size of the segment in bytes 320 hcf_32 nic_addr; // destination address (in NIC memory) 321 hcf_16 flags; // 0x0001 : CRC Yes/No 322 // hcf_32 flags; // 0x0001 : CRC Yes/No 323 /* ;? still not the whole story 324 * flags is extended from 16 to 32 bits to force that compiling FW.C produces the same structures 325 * in memory as FUPU4 BIN files. 326 * Note that the problem arises from the violation of the constraint to use packing at byte boundaries 327 * as was stipulated in the WCI-specification 328 * The Pack pragma can't resolve this issue, because that impacts all members of the structure with 329 * disregard of their actual size, so aligning host_addr under MSVC 1.5 at 4 bytes, also aligns 330 * len, typ etc on 4 bytes 331 * */ 332 // hcf_16 pad; //!! be careful alignment problems for Bin download versus C download 333 hcf_8 FAR *host_addr; // source address (in Host memory) 334 } CFG_PROG_STRCT; // segment_descp; 335 336 // a structure used for transporting debug-related information from firmware 337 // via the HCF, into the MSF 338 typedef struct { 339 hcf_16 len; 340 hcf_16 typ; 341 hcf_16 msg_id, msg_par, msg_tstamp; 342 } CFG_FW_PRINTF_STRCT; 343 344 // a structure used to define the location and size of a certain debug-related 345 // buffer in nic-ram. 346 typedef struct { 347 hcf_16 len; 348 hcf_16 typ; 349 hcf_32 DbMsgCount, // ds (nicram) address of a counter 350 DbMsgBuffer, // ds (nicram) address of the buffer 351 DbMsgSize, // number of entries (each 3 word in size) in this buffer 352 DbMsgIntrvl; // ds (nicram) address of interval for generating InfDrop event 353 } CFG_FW_PRINTF_BUFFER_LOCATION_STRCT; 354 355 XX3( CFG_RANGES, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 1] ) /*Actor/Supplier range (1 variant)*/ 356 XX3( CFG_RANGE1, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 1] ) /*Actor/Supplier range (1 variant)*/ 357 XX3( CFG_RANGE2, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 2] ) /*Actor range ( 2 variants) */ 358 XX3( CFG_RANGE3, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 3] ) /*Actor range ( 3 variants) */ 359 XX3( CFG_RANGE4, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 4] ) /*Actor range ( 4 variants) */ 360 XX3( CFG_RANGE5, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 5] ) /*Actor range ( 5 variants) */ 361 XX3( CFG_RANGE6, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 6] ) /*Actor range ( 6 variants) */ 362 XX3( CFG_RANGE7, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 7] ) /*Actor range ( 7 variants) */ 363 XX3( CFG_RANGE20, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[20] ) /*Actor range (20 variants) */ 364 365 /*Frames */ 366 X3( CFG_ASSOC_STAT, assoc_stat, station_addr[3], val[46] ) /*Association status, basic */ 367 X2( CFG_ASSOC_STAT3, assoc_stat, station_addr[3] ) /*assoc_stat:3 */ 368 X3( CFG_ASSOC_STAT1, assoc_stat, station_addr[3], frame_body[43] ) /*assoc_stat:1 */ 369 X4( CFG_ASSOC_STAT2, assoc_stat, station_addr[3], old_ap_addr[3], frame_body[43] ) /*assoc_stat:2 */ 370 371 /*Static Configurations */ 372 X1( CFG_CNF_PORT_TYPE, port_type ) /*[STA] Connection control characteristics */ 373 X1( CFG_MAC_ADDR, mac_addr[3] ) /*general: FC01,FC08,FC11,FC12,FC13,FC14,FC15,FC16 */ 374 X1( CFG_CNF_OWN_MAC_ADDR, mac_addr[3] ) 375 X1( CFG_ID, ssid[17] ) /*0xFC02, 0xFC04, 0xFC0E */ 376 /* X1( CFG_DESIRED_SSID, ssid[17] ) see Dynamic Configurations */ 377 X1( CFG_CNF_OWN_CHANNEL, channel ) /*Communication channel for BSS creation */ 378 X1( CFG_CNF_OWN_SSID, ssid[17] ) 379 X1( CFG_CNF_OWN_ATIM_WINDOW, atim_window ) 380 X1( CFG_CNF_SYSTEM_SCALE, system_scale ) 381 X1( CFG_CNF_MAX_DATA_LEN, max_data_len ) 382 X1( CFG_CNF_WDS_ADDR, mac_addr[3] ) /*[STA] MAC Address of corresponding WDS Link node */ 383 X1( CFG_CNF_PM_ENABLED, pm_enabled ) /*[STA] Switch for ESS Power Management (PM) On/Off */ 384 X1( CFG_CNF_PM_EPS, pm_eps ) /*[STA] Switch for ESS PM EPS/PS Mode */ 385 X1( CFG_CNF_MCAST_RX, mcast_rx ) /*[STA] Switch for ESS PM Multicast reception On/Off */ 386 X1( CFG_CNF_MAX_SLEEP_DURATION, duration ) /*[STA] Maximum sleep time for ESS PM */ 387 X1( CFG_CNF_PM_HOLDOVER_DURATION, duration ) /*[STA] Holdover time for ESS PM */ 388 X1( CFG_CNF_OWN_NAME, ssid[17] ) /*Identification text for diagnostic purposes */ 389 X1( CFG_CNF_OWN_DTIM_PERIOD, period ) /*[AP] Beacon intervals between successive DTIMs */ 390 X1( CFG_CNF_WDS_ADDR1, mac_addr[3] ) /*[AP] Port 1 MAC Adrs of corresponding WDS Link node */ 391 X1( CFG_CNF_WDS_ADDR2, mac_addr[3] ) /*[AP] Port 2 MAC Adrs of corresponding WDS Link node */ 392 X1( CFG_CNF_WDS_ADDR3, mac_addr[3] ) /*[AP] Port 3 MAC Adrs of corresponding WDS Link node */ 393 X1( CFG_CNF_WDS_ADDR4, mac_addr[3] ) /*[AP] Port 4 MAC Adrs of corresponding WDS Link node */ 394 X1( CFG_CNF_WDS_ADDR5, mac_addr[3] ) /*[AP] Port 5 MAC Adrs of corresponding WDS Link node */ 395 X1( CFG_CNF_WDS_ADDR6, mac_addr[3] ) /*[AP] Port 6 MAC Adrs of corresponding WDS Link node */ 396 X1( CFG_CNF_MCAST_PM_BUF, mcast_pm_buf ) /*[AP] Switch for PM buffering of Multicast Messages */ 397 X1( CFG_CNF_REJECT_ANY, reject_any ) /*[AP] Switch for PM buffering of Multicast Messages */ 398 //X1( CFG_CNF_ENCRYPTION_ENABLED, encryption ) /*specify encryption type of Tx/Rx messages */ 399 X1( CFG_CNF_ENCRYPTION, encryption ) /*specify encryption type of Tx/Rx messages */ 400 X1( CFG_CNF_AUTHENTICATION, authentication ) /*selects Authentication algorithm */ 401 X1( CFG_CNF_EXCL_UNENCRYPTED, exclude_unencrypted ) /*[AP] Switch for 'clear-text' rx message acceptance */ 402 X1( CFG_CNF_MCAST_RATE, mcast_rate ) /*Transmit Data rate for Multicast frames */ 403 X1( CFG_CNF_INTRA_BSS_RELAY, intra_bss_relay ) /*[AP] Switch for IntraBBS relay */ 404 X1( CFG_CNF_MICRO_WAVE, micro_wave ) /*MicroWave (Robustness) */ 405 X1( CFG_CNF_LOAD_BALANCING, load_balancing ) /*Load Balancing (Boolean, 0=OFF, 1=ON, default=1) */ 406 X1( CFG_CNF_MEDIUM_DISTRIBUTION, medium_distribution ) /*Medium Distribution (Boolean, 0=OFF, 1=ON, default=1) */ 407 X1( CFG_CNF_GROUP_ADDR_FILTER, group_addr_filter ) /*Group Address Filter */ 408 X1( CFG_CNF_TX_POW_LVL, tx_pow_lvl ) /*Tx Power Level */ 409 XX4( CFG_CNF_COUNTRY_INFO, \ 410 hcf_16, n_channel_sets, hcf_16, country_code[2], \ 411 hcf_16, environment, CHANNEL_SET, channel_set[1] ) /*Current Country Info */ 412 XX4( CFG_CNF_COUNTRY_INFO_MAX, \ 413 hcf_16, n_channel_sets, hcf_16, country_code[2], \ 414 hcf_16, environment, CHANNEL_SET, channel_set[14]) /*Current Country Info */ 415 416 /*Dynamic Configurations */ 417 X1( CFG_DESIRED_SSID, ssid[17] ) /*[STA] Service Set identification for connection */ 418 #define GROUP_ADDR_SIZE (32 * 6) //32 6-byte MAC-addresses 419 X1( CFG_GROUP_ADDR, mac_addr[GROUP_ADDR_SIZE/2] ) /*[STA] Multicast MAC Addresses for Rx-message */ 420 X1( CFG_CREATE_IBSS, create_ibss ) /*[STA] Switch for IBSS creation On/Off */ 421 X1( CFG_RTS_THRH, rts_thrh ) /*[STA] Frame length used for RTS/CTS handshake */ 422 X1( CFG_TX_RATE_CNTL, tx_rate_cntl ) /*[STA] Data rate control for message transmission */ 423 X1( CFG_PROMISCUOUS_MODE, promiscuous_mode ) /*[STA] Switch for Promiscuous mode reception On/Of */ 424 X1( CFG_WOL, wake_on_lan ) /*[STA] Switch for Wake-On-LAN mode */ 425 X1( CFG_RTS_THRH0, rts_thrh ) /*[AP] Port 0 frame length for RTS/CTS handshake */ 426 X1( CFG_RTS_THRH1, rts_thrh ) /*[AP] Port 1 frame length for RTS/CTS handshake */ 427 X1( CFG_RTS_THRH2, rts_thrh ) /*[AP] Port 2 frame length for RTS/CTS handshake */ 428 X1( CFG_RTS_THRH3, rts_thrh ) /*[AP] Port 3 frame length for RTS/CTS handshake */ 429 X1( CFG_RTS_THRH4, rts_thrh ) /*[AP] Port 4 frame length for RTS/CTS handshake */ 430 X1( CFG_RTS_THRH5, rts_thrh ) /*[AP] Port 5 frame length for RTS/CTS handshake */ 431 X1( CFG_RTS_THRH6, rts_thrh ) /*[AP] Port 6 frame length for RTS/CTS handshake */ 432 X1( CFG_TX_RATE_CNTL0, rate_cntl ) /*[AP] Port 0 data rate control for transmission */ 433 X1( CFG_TX_RATE_CNTL1, rate_cntl ) /*[AP] Port 1 data rate control for transmission */ 434 X1( CFG_TX_RATE_CNTL2, rate_cntl ) /*[AP] Port 2 data rate control for transmission */ 435 X1( CFG_TX_RATE_CNTL3, rate_cntl ) /*[AP] Port 3 data rate control for transmission */ 436 X1( CFG_TX_RATE_CNTL4, rate_cntl ) /*[AP] Port 4 data rate control for transmission */ 437 X1( CFG_TX_RATE_CNTL5, rate_cntl ) /*[AP] Port 5 data rate control for transmission */ 438 X1( CFG_TX_RATE_CNTL6, rate_cntl ) /*[AP] Port 6 data rate control for transmission */ 439 XX1( CFG_DEFAULT_KEYS, KEY_STRCT, key[4] ) /*defines set of encryption keys */ 440 X1( CFG_TX_KEY_ID, tx_key_id ) /*select key for encryption of Tx messages */ 441 X1( CFG_SCAN_SSID, ssid[17] ) /*identification for connection */ 442 X5( CFG_ADD_TKIP_DEFAULT_KEY, \ 443 tkip_key_id_info, tkip_key_iv_info[4], tkip_key[8], \ 444 tx_mic_key[4], rx_mic_key[4] ) /* */ 445 X6( CFG_ADD_TKIP_MAPPED_KEY, bssid[3], tkip_key[8], \ 446 tsc[4], rsc[4], tx_mic_key[4], rx_mic_key[4] ) /* */ 447 X1( CFG_SET_SSN_AUTHENTICATION_SUITE, \ 448 ssn_authentication_suite ) /* */ 449 X1( CFG_REMOVE_TKIP_DEFAULT_KEY,tkip_key_id ) /* */ 450 X1( CFG_TICK_TIME, tick_time ) /*Auxiliary Timer tick interval */ 451 X1( CFG_DDS_TICK_TIME, tick_time ) /*Disconnected DeepSleep Timer tick interval */ 452 453 /********************************************************************** 454 * Added for Pattern-matching WakeOnLan. (See firmware design note WMDN281C) 455 **********************************************************************/ 456 #define WOL_PATTERNS 5 // maximum of 5 patterns in firmware 457 #define WOL_PATTERN_LEN 124 // maximum 124 bytes pattern length per pattern in firmware 458 #define WOL_MASK_LEN 30 // maximum 30 bytes mask length per pattern in firmware 459 #define WOL_BUF_SIZE (WOL_PATTERNS * (WOL_PATTERN_LEN + WOL_MASK_LEN + 6) / 2) 460 X2( CFG_WOL_PATTERNS, nPatterns, buffer[WOL_BUF_SIZE] ) /*[STA] WakeOnLan pattern match, room for 5 patterns*/ 461 462 X5( CFG_SUP_RANGE, role, id, variant, bottom, top ) /*[PRI] Primary Supplier compatibility range */ 463 /* NIC Information */ 464 X4( CFG_IDENTITY, comp_id, variant, version_major, version_minor ) /*identification Prototype */ 465 #define CFG_DRV_IDENTITY_STRCT CFG_IDENTITY_STRCT 466 #define CFG_PRI_IDENTITY_STRCT CFG_IDENTITY_STRCT 467 #define CFG_NIC_IDENTITY_STRCT CFG_IDENTITY_STRCT 468 #define CFG_FW_IDENTITY_STRCT CFG_IDENTITY_STRCT 469 X1( CFG_RID_INF_MIN, y ) /*lowest value representing an Information RID */ 470 X1( CFG_MAX_LOAD_TIME, max_load_time ) /*[PRI] Max response time of the Download command */ 471 X3( CFG_DL_BUF, buf_page, buf_offset, buf_len ) /*[PRI] Download buffer location and size */ 472 // X5( CFG_PRI_SUP_RANGE, role, id, variant, bottom, top ) /*[PRI] Primary Supplier compatibility range */ 473 X5( CFG_CFI_ACT_RANGES_PRI,role, id, variant, bottom, top ) /*[PRI] Controller Actor compatibility ranges */ 474 // X5( CFG_NIC_HSI_SUP_RANGE, role, id, variant, bottom, top ) /*H/W - S/W I/F supplier range */ 475 X1( CFG_NIC_SERIAL_NUMBER, serial_number[17] ) /*[PRI] Network I/F Card serial number */ 476 X5( CFG_NIC_MFI_SUP_RANGE, role, id, variant, bottom, top ) /*[PRI] Modem I/F Supplier compatibility range */ 477 X5( CFG_NIC_CFI_SUP_RANGE, role, id, variant, bottom, top ) /*[PRI] Controller I/F Supplier compatibility range*/ 478 //H-I X1( CFG_CHANNEL_LIST, channel_list ) /*Allowed communication channels */ 479 //H-I XX2( CFG_REG_DOMAINS, hcf_16, num_domain, hcf_8, reg_domains[10] ) /*List of intended regulatory domains */ 480 X1( CFG_NIC_TEMP_TYPE, temp_type ) /*Hardware temperature range code */ 481 //H-I X1( CFG_CIS, cis[240] ) /*PC Card Standard Card Information Structure */ 482 X5( CFG_NIC_PROFILE, \ 483 profile_code, capability_options, allowed_data_rates, val4, val5 ) /*Card Profile */ 484 // X5( CFG_FW_SUP_RANGE, role, id, variant, bottom, top ) /*[STA] Station I/F Supplier compatibility range */ 485 X5( CFG_MFI_ACT_RANGES, role, id, variant, bottom, top ) /*[STA] Modem I/F Actor compatibility ranges */ 486 X5( CFG_CFI_ACT_RANGES_STA,role, id, variant, bottom, top ) /*[STA] Controller I/F Actor compatibility ranges */ 487 X5( CFG_MFI_ACT_RANGES_STA,role, id, variant, bottom, top ) /*[STA] Controller I/F Actor compatibility ranges */ 488 X1( CFG_NIC_BUS_TYPE, nic_bus_type ) /*NIC bustype derived from BUSSEL host I/F signals */ 489 490 /* MAC INFORMATION */ 491 X1( CFG_PORT_STAT, port_stat ) /*[STA] Actual MAC Port connection control status */ 492 X1( CFG_CUR_SSID, ssid[17] ) /*[STA] Identification of the actually connected SS */ 493 X1( CFG_CUR_BSSID, mac_addr[3] ) /*[STA] Identification of the actually connected BSS */ 494 X3( CFG_COMMS_QUALITY, coms_qual, signal_lvl, noise_lvl ) /*[STA] Quality of the Basic Service Set connection */ 495 X1( CFG_CUR_TX_RATE, rate ) /*[STA] Actual transmit data rate */ 496 X1( CFG_CUR_BEACON_INTERVAL, interval ) /*Beacon transmit interval time for BSS creation */ 497 #if (HCF_TYPE) & HCF_TYPE_WARP 498 X11( CFG_CUR_SCALE_THRH, \ 499 carrier_detect_thrh_cck, carrier_detect_thrh_ofdm, defer_thrh, \ 500 energy_detect_thrh, rssi_on_thrh_deviation, \ 501 rssi_off_thrh_deviation, cck_drop_thrh, ofdm_drop_thrh, \ 502 cell_search_thrh, out_of_range_thrh, delta_snr ) 503 #else 504 X6( CFG_CUR_SCALE_THRH, \ 505 energy_detect_thrh, carrier_detect_thrh, defer_thrh, \ 506 cell_search_thrh, out_of_range_thrh, delta_snr ) /*Actual System Scale thresholds settings */ 507 #endif // HCF_TYPE_WARP 508 X1( CFG_PROTOCOL_RSP_TIME, time ) /*Max time to await a response to a request message */ 509 X1( CFG_CUR_SHORT_RETRY_LIMIT, limit ) /*Max number of transmit attempts for short frames */ 510 X1( CFG_CUR_LONG_RETRY_LIMIT, limit ) /*Max number of transmit attempts for long frames */ 511 X1( CFG_MAX_TX_LIFETIME, time ) /*Max transmit frame handling duration */ 512 X1( CFG_MAX_RX_LIFETIME, time ) /*Max received frame handling duration */ 513 X1( CFG_CF_POLLABLE, cf_pollable ) /*[STA] Contention Free pollable capability indication */ 514 X2( CFG_AUTHENTICATION_ALGORITHMS,authentication_type, type_enabled ) /*Authentication Algorithm */ 515 X1( CFG_PRIVACY_OPT_IMPLEMENTED,privacy_opt_implemented ) /*WEP Option availability indication */ 516 X1( CFG_CUR_REMOTE_RATES, rates ) /*CurrentRemoteRates */ 517 X1( CFG_CUR_USED_RATES, rates ) /*CurrentUsedRates */ 518 X1( CFG_CUR_SYSTEM_SCALE, current_system_scale ) /*CurrentUsedRates */ 519 X1( CFG_CUR_TX_RATE1, rate ) /*[AP] Actual Port 1 transmit data rate */ 520 X1( CFG_CUR_TX_RATE2, rate ) /*[AP] Actual Port 2 transmit data rate */ 521 X1( CFG_CUR_TX_RATE3, rate ) /*[AP] Actual Port 3 transmit data rate */ 522 X1( CFG_CUR_TX_RATE4, rate ) /*[AP] Actual Port 4 transmit data rate */ 523 X1( CFG_CUR_TX_RATE5, rate ) /*[AP] Actual Port 5 transmit data rate */ 524 X1( CFG_CUR_TX_RATE6, rate ) /*[AP] Actual Port 6 transmit data rate */ 525 X1( CFG_OWN_MAC_ADDR, mac_addr[3] ) /*[AP] Unique local node MAC Address */ 526 X3( CFG_PCF_INFO, medium_occupancy_limit, \ 527 cfp_period, cfp_max_duration ) /*[AP] Point Coordination Function capability info */ 528 X1( CFG_CUR_SSN_INFO_ELEMENT, ssn_info_element[1] ) /* */ 529 X4( CFG_CUR_TKIP_IV_INFO, \ 530 tkip_seq_cnt0[4], tkip_seq_cnt1[4], \ 531 tkip_seq_cnt2[4], tkip_seq_cnt3[4] ) /* */ 532 X2( CFG_CUR_ASSOC_REQ_INFO, frame_type, frame_body[1] ) /* 0xFD8C */ 533 X2( CFG_CUR_ASSOC_RESP_INFO, frame_type, frame_body[1] ) /* 0xFD8D */ 534 535 536 /* Modem INFORMATION */ 537 X1( CFG_PHY_TYPE, phy_type ) /*Physical layer type indication */ 538 X1( CFG_CUR_CHANNEL, current_channel ) /*Actual frequency channel used for transmission */ 539 X1( CFG_CUR_POWER_STATE, current_power_state ) /*Actual power consumption status */ 540 X1( CFG_CCAMODE, cca_mode ) /*Clear channel assessment mode indication */ 541 X1( CFG_SUPPORTED_DATA_RATES, rates[5] ) /*Data rates capability information */ 542 543 544 /* FRAMES */ 545 XX1( CFG_SCAN, SCAN_RS_STRCT, scan_result[32] ) /*Scan results */ 546 547 548 549 //-------------------------------------------------------------------------------------- 550 // UIL management function to be passed to WaveLAN/IEEE Drivers in DUI_STRCT field fun 551 //-------------------------------------------------------------------------------------- 552 553 // HCF and UIL Common 554 #define MDD_ACT_SCAN 0x06 // Hermes Inquire Scan (F101) command 555 #define MDD_ACT_PRS_SCAN 0x07 // Hermes Probe Response Scan (F102) command 556 557 // UIL Specific 558 #define UIL_FUN_CONNECT 0x00 // Perform connect command 559 #define UIL_FUN_DISCONNECT 0x01 // Perform disconnect command 560 #define UIL_FUN_ACTION 0x02 // Perform UIL Action command. 561 #define UIL_FUN_SEND_DIAG_MSG 0x03 // Send a diagnostic message. 562 #define UIL_FUN_GET_INFO 0x04 // Retrieve information from NIC. 563 #define UIL_FUN_PUT_INFO 0x05 // Put information on NIC. 564 565 /* UIL_ACT_TALLIES 0x05 * this should not be exported to the USF 566 * it is solely intended as a strategic choice for the MSF to either 567 * - use HCF_ACT_TALLIES and direct IFB access 568 * - use CFG_TALLIES 569 */ 570 #define UIL_ACT_SCAN MDD_ACT_SCAN 571 #define UIL_ACT_PRS_SCAN MDD_ACT_PRS_SCAN 572 #define UIL_ACT_BLOCK 0x0B 573 #define UIL_ACT_UNBLOCK 0x0C 574 #define UIL_ACT_RESET 0x80 575 #define UIL_ACT_REBIND 0x81 576 #define UIL_ACT_APPLY 0x82 577 #define UIL_ACT_DISCONNECT 0x83 //;?040108 possibly obsolete //Special for WINCE 578 579 // HCF Specific 580 /* Note that UIL_ACT-codes must match HCF_ACT-codes across a run-time bound I/F 581 * The initial matching is achieved by "#define HCF_ACT_xxx HCF_UIL_ACT_xxx" where appropriate 582 * In other words, these codes should never, ever change to minimize migration problems between 583 * combinations of old drivers and new utilities and vice versa 584 */ 585 #define HCF_DISCONNECT 0x01 //disconnect request for hcf_connect (invalid as IO Address) 586 #define HCF_ACT_TALLIES 0x05 // ! UIL_ACT_TALLIES does not exist ! Hermes Inquire Tallies (F100) cmd 587 #if ( (HCF_TYPE) & HCF_TYPE_WARP ) == 0 588 #define HCF_ACT_SCAN MDD_ACT_SCAN 589 #endif // HCF_TYPE_WARP 590 #define HCF_ACT_PRS_SCAN MDD_ACT_PRS_SCAN 591 #if HCF_INT_ON 592 #define HCF_ACT_INT_OFF 0x0D // Disable Interrupt generation 593 #define HCF_ACT_INT_ON 0x0E // Enable Interrupt generation 594 #define HCF_ACT_INT_FORCE_ON 0x0F // Enforce Enable Interrupt generation 595 #endif // HCF_INT_ON 596 #define HCF_ACT_RX_ACK 0x15 // Receiever ACK (optimization) 597 #if (HCF_TYPE) & HCF_TYPE_CCX 598 #define HCF_ACT_CCX_ON 0x1A // enable CKIP 599 #define HCF_ACT_CCX_OFF 0x1B // disable CKIP 600 #endif // HCF_TYPE_CCX 601 #if (HCF_SLEEP) & HCF_DDS 602 #define HCF_ACT_SLEEP 0x1C // DDS Sleep request 603 //#define HCF_ACT_WAKEUP 0x1D // DDS Wakeup request 604 #endif // HCF_DDS 605 606 /* HCF_ACT_MAX // xxxx: start value for UIL-range, NOT to be passed to HCF 607 * Too bad, there was originally no spare room created to use 608 * HCF_ACT_MAX as an equivalent of HCF_ERR_MAX. Since creating 609 * this room in retrospect would create a backward incompatibility 610 * we will just have to live with the haphazard sequence of 611 * UIL- and HCF specific codes. Theoretically this could be 612 * corrected when and if there will ever be an overall 613 * incompatibility introduced for another reason 614 */ 615 616 /*============================================================= HERMES RECORDS ============================*/ 617 #define CFG_RID_FW_MIN 0xFA00 //lowest value representing a Hermes-II based RID 618 // #define CFG_PDA_BEGIN 0xFA // 619 // #define CFG_PDA_END 0xFA // 620 // #define CFG_PDA_NIC_TOP_LVL_ASSEMBLY_NUMBER 0xFA // 621 // #define CFG_PDA_PCB_TRACER_NUMBER 0xFA // 622 // #define CFG_PDA_RMM_TRACER_NUMBER 0xFA // 623 // #define CFG_PDA_RMM_COMP_ID 0xFA // 624 // #define CFG_PDA_ 0xFA // 625 626 /*============================================================= CONFIGURATION RECORDS =====================*/ 627 /*============================================================= mask 0xFCxx =====================*/ 628 #define CFG_RID_CFG_MIN 0xFC00 //lowest value representing a Hermes configuration RID 629 630 // NETWORK PARAMETERS, STATIC CONFIGURATION ENTITIES 631 //FC05, FC0B, FC0C, FC0D: SEE W2DN149 632 633 #define CFG_CNF_PORT_TYPE 0xFC00 //[STA] Connection control characteristics 634 #define CFG_CNF_OWN_MAC_ADDR 0xFC01 //[STA] MAC Address of this node 635 // 0xFC02 see DYNAMIC CONFIGURATION ENTITIES 636 #define CFG_CNF_OWN_CHANNEL 0xFC03 //Communication channel for BSS creation 637 #define CFG_CNF_OWN_SSID 0xFC04 //IBSS creation (STA) or ESS (AP) Service Set Ident 638 #define CFG_CNF_OWN_ATIM_WINDOW 0xFC05 //[STA] ATIM Window time for IBSS creation 639 #define CFG_CNF_SYSTEM_SCALE 0xFC06 //System Scale that specifies the AP density 640 #define CFG_CNF_MAX_DATA_LEN 0xFC07 //Maximum length of MAC Frame Body data 641 #define CFG_CNF_PM_ENABLED 0xFC09 //[STA] Switch for ESS Power Management (PM) 642 #define CFG_CNF_MCAST_RX 0xFC0B //[STA] Switch for ESS PM Multicast reception On/Off 643 #define CFG_CNF_MAX_SLEEP_DURATION 0xFC0C //[STA] Maximum sleep time for ESS PM 644 #define CFG_CNF_HOLDOVER_DURATION 0xFC0D //[STA] Holdover time for ESS PM 645 #define CFG_CNF_OWN_NAME 0xFC0E //Identification text for diagnostic purposes 646 647 #define CFG_CNF_OWN_DTIM_PERIOD 0xFC10 //[AP] Beacon intervals between successive DTIMs 648 #define CFG_CNF_WDS_ADDR1 0xFC11 //[AP] Port 1 MAC Adrs of corresponding WDS Link node 649 #define CFG_CNF_WDS_ADDR2 0xFC12 //[AP] Port 2 MAC Adrs of corresponding WDS Link node 650 #define CFG_CNF_WDS_ADDR3 0xFC13 //[AP] Port 3 MAC Adrs of corresponding WDS Link node 651 #define CFG_CNF_WDS_ADDR4 0xFC14 //[AP] Port 4 MAC Adrs of corresponding WDS Link node 652 #define CFG_CNF_WDS_ADDR5 0xFC15 //[AP] Port 5 MAC Adrs of corresponding WDS Link node 653 #define CFG_CNF_WDS_ADDR6 0xFC16 //[AP] Port 6 MAC Adrs of corresponding WDS Link node 654 #define CFG_CNF_PM_MCAST_BUF 0xFC17 //[AP] Switch for PM buffereing of Multicast Messages 655 #define CFG_CNF_MCAST_PM_BUF CFG_CNF_PM_MCAST_BUF //name does not match H-II spec 656 #define CFG_CNF_REJECT_ANY 0xFC18 //[AP] Switch for PM buffereing of Multicast Messages 657 658 #define CFG_CNF_ENCRYPTION 0xFC20 //select en/de-cryption of Tx/Rx messages 659 #define CFG_CNF_AUTHENTICATION 0xFC21 //[STA] selects Authentication algorithm 660 #define CFG_CNF_EXCL_UNENCRYPTED 0xFC22 //[AP] Switch for 'clear-text' rx message acceptance 661 #define CFG_CNF_MCAST_RATE 0xFC23 //Transmit Data rate for Multicast frames 662 #define CFG_CNF_INTRA_BSS_RELAY 0xFC24 //[AP] Switch for IntraBBS relay 663 #define CFG_CNF_MICRO_WAVE 0xFC25 //MicroWave (Robustness) 664 #define CFG_CNF_LOAD_BALANCING 0xFC26 //Load Balancing (Boolean, 0=OFF, 1=ON, default=1) 665 #define CFG_CNF_MEDIUM_DISTRIBUTION 0xFC27 //Medium Distribution (Boolean, 0=OFF, 1=ON, default=1) 666 #define CFG_CNF_RX_ALL_GROUP_ADDR 0xFC28 //[STA] Group Address Filter 667 #define CFG_CNF_COUNTRY_INFO 0xFC29 //Country Info 668 #if (HCF_TYPE) & HCF_TYPE_WARP 669 #define CFG_CNF_TX_POW_LVL 0xFC2A //TxPower Level 670 #define CFG_CNF_CONNECTION_CNTL 0xFC30 //[STA] Connection Control 671 #define CFG_CNF_OWN_BEACON_INTERVAL 0xFC31 //[AP] 672 #define CFG_CNF_SHORT_RETRY_LIMIT 0xFC32 // 673 #define CFG_CNF_LONG_RETRY_LIMIT 0xFC33 // 674 #define CFG_CNF_TX_EVENT_MODE 0xFC34 // 675 #define CFG_CNF_WIFI_COMPATIBLE 0xFC35 //[STA] Wifi compatible 676 #endif // HCF_TYPE_WARP 677 #if (HCF_TYPE) & HCF_TYPE_BEAGLE_HII5 678 #define CFG_VOICE_RETRY_LIMIT 0xFC36 /* Voice frame retry limit. Range: 1-15, default: 4 */ 679 #define CFG_VOICE_CONTENTION_WINDOW 0xFC37 /* Contention window for voice frames. */ 680 #endif // BEAGLE_HII5 681 682 // NETWORK PARAMETERS, DYNAMIC CONFIGURATION ENTITIES 683 #define CFG_DESIRED_SSID 0xFC02 //[STA] Service Set identification for connection and scan 684 685 #define CFG_GROUP_ADDR 0xFC80 //[STA] Multicast MAC Addresses for Rx-message 686 #define CFG_CREATE_IBSS 0xFC81 //[STA] Switch for IBSS creation On/Off 687 #define CFG_RTS_THRH 0xFC83 //Frame length used for RTS/CTS handshake 688 #define CFG_TX_RATE_CNTL 0xFC84 //[STA] Data rate control for message transmission 689 #define CFG_PROMISCUOUS_MODE 0xFC85 //[STA] Switch for Promiscuous mode reception On/Off 690 #define CFG_WOL 0xFC86 //[STA] Switch for Wake-On-LAN mode 691 #define CFG_WOL_PATTERNS 0xFC87 //[STA] Patterns for Wake-On-LAN 692 #define CFG_SUPPORTED_RATE_SET_CNTL 0xFC88 // 693 #define CFG_BASIC_RATE_SET_CNTL 0xFC89 // 694 695 #define CFG_SOFTWARE_ACK_MODE 0xFC90 // 696 #define CFG_RTS_THRH0 0xFC97 //[AP] Port 0 frame length for RTS/CTS handshake 697 #define CFG_RTS_THRH1 0xFC98 //[AP] Port 1 frame length for RTS/CTS handshake 698 #define CFG_RTS_THRH2 0xFC99 //[AP] Port 2 frame length for RTS/CTS handshake 699 #define CFG_RTS_THRH3 0xFC9A //[AP] Port 3 frame length for RTS/CTS handshake 700 #define CFG_RTS_THRH4 0xFC9B //[AP] Port 4 frame length for RTS/CTS handshake 701 #define CFG_RTS_THRH5 0xFC9C //[AP] Port 5 frame length for RTS/CTS handshake 702 #define CFG_RTS_THRH6 0xFC9D //[AP] Port 6 frame length for RTS/CTS handshake 703 704 #define CFG_TX_RATE_CNTL0 0xFC9E //[AP] Port 0 data rate control for transmission 705 #define CFG_TX_RATE_CNTL1 0xFC9F //[AP] Port 1 data rate control for transmission 706 #define CFG_TX_RATE_CNTL2 0xFCA0 //[AP] Port 2 data rate control for transmission 707 #define CFG_TX_RATE_CNTL3 0xFCA1 //[AP] Port 3 data rate control for transmission 708 #define CFG_TX_RATE_CNTL4 0xFCA2 //[AP] Port 4 data rate control for transmission 709 #define CFG_TX_RATE_CNTL5 0xFCA3 //[AP] Port 5 data rate control for transmission 710 #define CFG_TX_RATE_CNTL6 0xFCA4 //[AP] Port 6 data rate control for transmission 711 712 #define CFG_DEFAULT_KEYS 0xFCB0 //defines set of encryption keys 713 #define CFG_TX_KEY_ID 0xFCB1 //select key for encryption of Tx messages 714 #define CFG_SCAN_SSID 0xFCB2 //Scan SSID 715 #define CFG_ADD_TKIP_DEFAULT_KEY 0xFCB4 //set KeyID and TxKey indication 716 #define KEY_ID 0x0003 //KeyID mask for tkip_key_id_info field 717 #define TX_KEY 0x8000 //Default Tx Key flag of tkip_key_id_info field 718 #define CFG_SET_WPA_AUTH_KEY_MGMT_SUITE 0xFCB5 //Authenticated Key Management Suite 719 #define CFG_REMOVE_TKIP_DEFAULT_KEY 0xFCB6 //invalidate KeyID and TxKey indication 720 #define CFG_ADD_TKIP_MAPPED_KEY 0xFCB7 //set MAC address pairwise station 721 #define CFG_REMOVE_TKIP_MAPPED_KEY 0xFCB8 //invalidate MAC address pairwise station 722 #define CFG_SET_WPA_CAPABILITIES_INFO 0xFCB9 //WPA Capabilities 723 #define CFG_CACHED_PMK_ADDR 0xFCBA //set MAC address of pre-authenticated AP 724 #define CFG_REMOVE_CACHED_PMK_ADDR 0xFCBB //invalidate MAC address of pre-authenticated AP 725 #define CFG_FCBC 0xFCBC //FW codes ahead of available documentation, so ??????? 726 #define CFG_FCBD 0xFCBD //FW codes ahead of available documentation, so ??????? 727 #define CFG_FCBE 0xFCBE //FW codes ahead of available documentation, so ??????? 728 #define CFG_FCBF 0xFCBF //FW codes ahead of available documentation, so ??????? 729 730 #define CFG_HANDOVER_ADDR 0xFCC0 //[AP] Station MAC Address re-associated with other AP 731 #define CFG_SCAN_CHANNEL 0xFCC2 //Channel set for host requested scan 732 //;?#define CFG_SCAN_CHANNEL_MASK 0xFCC2 // contains 733 #define CFG_DISASSOCIATE_ADDR 0xFCC4 //[AP] Station MAC Address to be disassociated 734 #define CFG_PROBE_DATA_RATE 0xFCC5 //WARP connection control 735 #define CFG_FRAME_BURST_LIMIT 0xFCC6 // 736 #define CFG_COEXISTENSE_BEHAVIOUR 0xFCC7 //[AP] 737 #define CFG_DEAUTHENTICATE_ADDR 0xFCC8 //MAC address of Station to be deauthenticated 738 739 // BEHAVIOR PARAMETERS 740 #define CFG_TICK_TIME 0xFCE0 //Auxiliary Timer tick interval 741 #define CFG_DDS_TICK_TIME 0xFCE1 //Disconnected DeepSleep Timer tick interval 742 //#define CFG_CNF_COUNTRY 0xFCFE apparently not needed ;? 743 #define CFG_RID_CFG_MAX 0xFCFF //highest value representing an Configuration RID 744 745 746 /*============================================================= INFORMATION RECORDS =====================*/ 747 /*============================================================= mask 0xFDxx =====================*/ 748 // NIC INFORMATION 749 #define CFG_RID_INF_MIN 0xFD00 //lowest value representing an Information RID 750 #define CFG_MAX_LOAD_TIME 0xFD00 //[INT] Maximum response time of the Download command. 751 #define CFG_DL_BUF 0xFD01 //[INT] Download buffer location and size. 752 #define CFG_PRI_IDENTITY 0xFD02 //[PRI] Primary Functions firmware identification. 753 #define CFG_PRI_SUP_RANGE 0xFD03 //[PRI] Primary Functions I/F Supplier compatibility range. 754 #define CFG_NIC_HSI_SUP_RANGE 0xFD09 //H/W - S/W I/F supplier range 755 #define CFG_NIC_SERIAL_NUMBER 0xFD0A //[PRI] Network Interface Card serial number. 756 #define CFG_NIC_IDENTITY 0xFD0B //[PRI] Network Interface Card identification. 757 #define CFG_NIC_MFI_SUP_RANGE 0xFD0C //[PRI] Modem I/F Supplier compatibility range. 758 #define CFG_NIC_CFI_SUP_RANGE 0xFD0D //[PRI] Controller I/F Supplier compatibility range. 759 #define CFG_CHANNEL_LIST 0xFD10 //Allowed communication channels. 760 #define CFG_NIC_TEMP_TYPE 0xFD12 //Hardware temperature range code. 761 #define CFG_CIS 0xFD13 //PC Card Standard Card Information Structure 762 #define CFG_NIC_PROFILE 0xFD14 //Card Profile 763 #define CFG_FW_IDENTITY 0xFD20 //firmware identification. 764 #define CFG_FW_SUP_RANGE 0xFD21 //firmware Supplier compatibility range. 765 #define CFG_MFI_ACT_RANGES_STA 0xFD22 //[STA] Modem I/F Actor compatibility ranges. 766 #define CFG_CFI_ACT_RANGES_STA 0xFD23 //[STA] Controller I/F Actor compatibility ranges. 767 #define CFG_NIC_BUS_TYPE 0xFD24 //Card Bustype 768 #define CFG_NIC_BUS_TYPE_PCCARD_CF 0x0000 //16 bit PC Card or Compact Flash 769 #define CFG_NIC_BUS_TYPE_USB 0x0001 //USB 770 #define CFG_NIC_BUS_TYPE_CARDBUS 0x0002 //CardBus 771 #define CFG_NIC_BUS_TYPE_PCI 0x0003 //(mini)PCI 772 #define CFG_DOMAIN_CODE 0xFD25 773 774 // MAC INFORMATION 775 #define CFG_PORT_STAT 0xFD40 //Actual MAC Port connection control status 776 #define CFG_CUR_SSID 0xFD41 //[STA] Identification of the actually connected SS 777 #define CFG_CUR_BSSID 0xFD42 //[STA] Identification of the actually connected BSS 778 #define CFG_COMMS_QUALITY 0xFD43 //[STA] Quality of the Basic Service Set connection 779 #define CFG_CUR_TX_RATE 0xFD44 //[STA] Actual transmit data rate 780 #define CFG_CUR_BEACON_INTERVAL 0xFD45 //Beacon transmit interval time for BSS creation 781 #define CFG_CUR_SCALE_THRH 0xFD46 //Actual System Scale thresholds settings 782 #define CFG_PROTOCOL_RSP_TIME 0xFD47 //Max time to await a response to a request message 783 #define CFG_CUR_SHORT_RETRY_LIMIT 0xFD48 //Max number of transmit attempts for short frames 784 #define CFG_CUR_LONG_RETRY_LIMIT 0xFD49 //Max number of transmit attempts for long frames 785 #define CFG_MAX_TX_LIFETIME 0xFD4A //Max transmit frame handling duration 786 #define CFG_MAX_RX_LIFETIME 0xFD4B //Max received frame handling duration 787 #define CFG_CF_POLLABLE 0xFD4C //[STA] Contention Free pollable capability indication 788 #define CFG_AUTHENTICATION_ALGORITHMS 0xFD4D //Available Authentication Algorithms indication 789 #define CFG_PRIVACY_OPT_IMPLEMENTED 0xFD4F //WEP Option availability indication 790 791 #define CFG_CUR_REMOTE_RATES 0xFD50 //[STA] CurrentRemoteRates 792 #define CFG_CUR_USED_RATES 0xFD51 //[STA] CurrentUsedRates 793 #define CFG_CUR_SYSTEM_SCALE 0xFD52 //[STA] CurrentSystemScale 794 795 #define CFG_CUR_TX_RATE1 0xFD80 //[AP] Actual Port 1 transmit data rate 796 #define CFG_CUR_TX_RATE2 0xFD81 //[AP] Actual Port 2 transmit data rate 797 #define CFG_CUR_TX_RATE3 0xFD82 //[AP] Actual Port 3 transmit data rate 798 #define CFG_CUR_TX_RATE4 0xFD83 //[AP] Actual Port 4 transmit data rate 799 #define CFG_CUR_TX_RATE5 0xFD84 //[AP] Actual Port 5 transmit data rate 800 #define CFG_CUR_TX_RATE6 0xFD85 //[AP] Actual Port 6 transmit data rate 801 #define CFG_NIC_MAC_ADDR 0xFD86 //Unique local node MAC Address 802 #define CFG_PCF_INFO 0xFD87 //[AP] Point Coordination Function capability info 803 //*RESERVED* #define CFG_HIGHEST_BASIC_RATE 0xFD88 // 804 #define CFG_CUR_COUNTRY_INFO 0xFD89 // 805 #define CFG_CUR_SSN_INFO_ELEMENT 0xFD8A // 806 #define CFG_CUR_TKIP_IV_INFO 0xFD8B // 807 #define CFG_CUR_ASSOC_REQ_INFO 0xFD8C // 808 #define CFG_CUR_ASSOC_RESP_INFO 0xFD8D // 809 #define CFG_CUR_LOAD 0xFD8E //[AP] current load on AP's channel 810 811 #define CFG_SECURITY_CAPABILITIES 0xFD90 //Combined capabilities information 812 813 // MODEM INFORMATION 814 #define CFG_PHY_TYPE 0xFDC0 //Physical layer type indication 815 #define CFG_CUR_CHANNEL 0xFDC1 //Actual frequency channel used for transmission 816 #define CFG_CUR_POWER_STATE 0xFDC2 //Actual power consumption status 817 #define CFG_CCA_MODE 0xFDC3 //Clear channel assessment mode indication 818 #define CFG_SUPPORTED_DATA_RATES 0xFDC6 //Data rates capability information 819 820 #define CFG_RID_INF_MAX 0xFDFF //highest value representing an Information RID 821 822 // ENGINEERING INFORMATION 823 #define CFG_RID_ENG_MIN 0xFFE0 //lowest value representing a Hermes engineering RID 824 825 826 /****************************** General define *************************************************************/ 827 828 829 //IFB field related 830 // IFB_CardStat 831 #define CARD_STAT_INCOMP_PRI 0x2000U // no compatible HSI / primary F/W 832 #define CARD_STAT_INCOMP_FW 0x1000U // no compatible station / tertiary F/W 833 #define CARD_STAT_DEFUNCT 0x0100U // HCF is in Defunct mode 834 // IFB_RxStat 835 #define RX_STAT_PRIO 0x00E0U //Priority subfield 836 #define RX_STAT_ERR 0x000FU //Error mask 837 #define RX_STAT_UNDECR 0x0002U //Non-decryptable encrypted message 838 #define RX_STAT_FCS_ERR 0x0001U //FCS error 839 840 // SNAP header for E-II Encapsulation 841 #define ENC_NONE 0xFF 842 #define ENC_1042 0x00 843 #define ENC_TUNNEL 0xF8 844 /****************************** Xxxxxxxx *******************************************************************/ 845 846 847 #define HCF_SUCCESS 0x00 // OK 848 #define HCF_ERR_TIME_OUT 0x04 // Expected Hermes event did not occure in expected time 849 #define HCF_ERR_NO_NIC 0x05 /* card not found (usually yanked away during hcfio_in_string 850 * Also: card is either absent or disabled while it should be neither */ 851 #define HCF_ERR_LEN 0x08 /* buffer size insufficient 852 * - IFB_ConfigTable too small 853 * - hcf_get_info buffer has a size of 0 or 1 or less than needed 854 * to accomodate all data 855 * - hcf_put_info: CFG_DLNV_DATA exceeds intermediate 856 * buffer size */ 857 #define HCF_ERR_INCOMP_PRI 0x09 // primary functions are not compatible 858 #define HCF_ERR_INCOMP_FW 0x0A // station functions are compatible 859 #define HCF_ERR_MIC 0x0D // MIC check fails 860 #define HCF_ERR_SLEEP 0x0E // NIC in sleep mode 861 #define HCF_ERR_MAX 0x3F /* end of HCF range 862 *** ** *** ****** *** *************** */ 863 #define HCF_ERR_DEFUNCT 0x80 // BIT, reflecting that the HCF is in defunct mode (bits 0x7F reflect cause) 864 #define HCF_ERR_DEFUNCT_AUX 0x82 // Timeout on acknowledgement on en/disabling AUX registers 865 #define HCF_ERR_DEFUNCT_TIMER 0x83 // Timeout on timer calibration during initialization process 866 #define HCF_ERR_DEFUNCT_TIME_OUT 0x84 // Timeout on Busy bit drop during BAP setup 867 #define HCF_ERR_DEFUNCT_CMD_SEQ 0x86 // Hermes and HCF are out of sync in issuing/processing commands 868 869 #define HCF_INT_PENDING 0x01 // return status of hcf_act( HCF_ACT_INT_OFF ) 870 871 #define HCF_PORT_0 0x0000 // Station supports only single MAC Port 872 #define HCF_PORT_1 0x0100 // HCF_PORT_1 through HCF_PORT_6 are only supported by AP F/W 873 #define HCF_PORT_2 0x0200 874 #define HCF_PORT_3 0x0300 875 #define HCF_PORT_4 0x0400 876 #define HCF_PORT_5 0x0500 877 #define HCF_PORT_6 0x0600 878 879 #define HCF_CNTL_ENABLE 0x01 880 #define HCF_CNTL_DISABLE 0x02 881 #define HCF_CNTL_CONNECT 0x03 882 #define HCF_CNTL_DISCONNECT 0x05 883 #define HCF_CNTL_CONTINUE 0x07 884 885 #define USE_DMA 0x0001 886 #define USE_16BIT 0x0002 887 #define DMA_ENABLED 0x8000 //weak name, it really means: F/W enabled and DMA selected 888 889 //#define HCF_DMA_FD_CNT (2*29) //size in bytes of one Tx/RxFS minus DA/SA 890 //;?the MSF ( H2PCI.C uses the next 2 mnemonics ) 891 #define HCF_DMA_RX_BUF1_SIZE (HFS_ADDR_DEST + 8) //extra bytes for LEN/SNAP if decapsulation 892 #define HCF_DMA_TX_BUF1_SIZE (HFS_ADDR_DEST + 2*6 + 8) //extra bytes for DA/SA/LEN/SNAP if encapsulation 893 894 //HFS_TX_CNTL 895 /* Note that the HCF_.... System Constants influence the HFS_.... values below 896 * H-I H-I | H-II H-II H-II.5 897 * WPA | WPA 898 * HFS_TX_CNTL_TX_OK 0002 0002 | 0002 0002 N/A <<<<<<<<deprecated 899 * HFS_TX_CNTL_TX_EX 0004 0004 | 0004 0004 N/A 900 * HFS_TX_CNTL_MIC N/A 0010 | N/A 0010 N/A 901 * HFS_TX_CNTL_TID N/A N/A | N/A N/A 000F 902 * HFS_TX_CNTL_SERVICE_CLASS N/A N/A | N/A N/A 00C0 903 * HFS_TX_CNTL_PORT 0700 0700 | 0700 0700 0700 904 * HFS_TX_CNTL_MIC_KEY_ID 1800 1800 | 0000 1800 N/A 905 * HFS_TX_CNTL_CKIP 0000 0000 | 0000 2000 2000 906 * HFS_TX_CNTL_TX_DELAY 4000 4000 | 4000 4000 N/A 907 * HFS_TX_CNTL_ACTION N/A N/A | N/A N/A 4000 908 * ==== ==== | ==== ==== ==== 909 * 5F06 5F16 | 4706 7F06 67CF 910 * 911 * HCF_TX_CNTL_MASK specifies the bits allowed on the Host I/F 912 * note: bit 0x4000 has different meaning for H-II and H-II.5 913 * note: [] indicate bits which are possibly added by the HCF to TxControl at the Host I/F 914 * note: () indicate bits which are supposedly never ever used in a WCI environment 915 * note: ? denote bits which seem not to be documented in the documents I have available 916 */ 917 //H-I: HCF_TX_CNTL_MASK 0x47FE //TX_DELAY, MACPort, Priority, (StrucType), TxEx, TxOK 918 //H-I WPA: HCF_TX_CNTL_MASK 0x5FE6 //TX_DELAY, MICKey, MACPort, Priority, (StrucType), TxEx, TxOK 919 #if (HCF_TYPE) & HCF_TYPE_WARP 920 #define HCF_TX_CNTL_MASK 0x27E7 //no TX_DELAY?, CCX, MACPort, Priority, (StrucType), TxEx, TxOK, Spectralink 921 //#elif (HCF_TYPE) & HCF_TYPE_WPA 922 //#define HCF_TX_CNTL_MASK 0x7F06 //TX_DELAY, CKIP?, MICKeyID, MACPort, [MIC],TxEx, TxOK (TAR419D7) 923 #else 924 #define HCF_TX_CNTL_MASK 0x67E7 //TX_DELAY?, CCX, MACPort, Priority, (StrucType), TxEx, TxOK, Spectralink 925 #endif // HCF_TYPE_WARP 926 927 #define HFS_TX_CNTL_TX_EX 0x0004U 928 929 #if (HCF_TYPE) & HCF_TYPE_WPA 930 #define HFS_TX_CNTL_MIC 0x0010U //802.3 format with TKIP ;?changes to 0x0008 for H-II 931 #define HFS_TX_CNTL_MIC_KEY_ID 0x1800U //MIC Key ID subfield 932 #endif // HCF_TYPE_WPA 933 934 #define HFS_TX_CNTL_PORT 0x0700U //Port subfield of TxControl field of Transmit Frame Structure 935 936 #if (HCF_TYPE) & HCF_TYPE_CCX 937 #define HFS_TX_CNTL_CKIP 0x2000U //CKIP encrypted flag 938 #endif // HCF_TYPE_CCX 939 940 #if (HCF_TYPE) & HCF_TYPE_TX_DELAY 941 #define HFS_TX_CNTL_TX_DELAY 0x4000U //decouple "put data" and send 942 #endif // HCF_TYPE_TX_DELAY 943 #define HFS_TX_CNTL_TX_CONT 0x4000u //engineering: continuous transmit 944 945 /*============================================================= HCF Defined RECORDS =========================*/ 946 #define CFG_PROD_DATA 0x0800 //Plug Data (Engineering Test purposes only) 947 #define CFG_DL_EEPROM 0x0806 //Up/Download I2PROM for USB 948 #define CFG_PDA 0x0002 //Download PDA 949 #define CFG_MEM_I2PROM 0x0004 //Up/Download EEPROM 950 951 #define CFG_MEM_READ 0x0000 952 #define CFG_MEM_WRITE 0x0001 953 954 #define CFG_NULL 0x0820 //Empty Mail Box Info Block 955 #define CFG_MB_INFO 0x0820 //Mail Box Info Block 956 #define CFG_WMP 0x0822 //WaveLAN Management Protocol 957 958 #if defined MSF_COMPONENT_ID 959 #define CFG_DRV_INFO 0x0825 //Driver Information structure (see CFG_DRV_INFO_STRCT for details) 960 #define CFG_DRV_IDENTITY 0x0826 //driver identity (see CFG_DRV_IDENTITY_STRCT for details) 961 #define CFG_DRV_SUP_RANGE 0x0827 //Supplier range of driver - utility I/F 962 #define CFG_DRV_ACT_RANGES_PRI 0x0828 //(Acceptable) Actor range for Primary Firmware - driver I/F 963 #define CFG_DRV_ACT_RANGES_STA 0x0829 //(Acceptable) Actor range for Station Firmware - driver I/F 964 #define CFG_DRV_ACT_RANGES_HSI 0x082A //(Acceptable) Actor range for H/W - driver I/F 965 #define CFG_DRV_ACT_RANGES_APF 0x082B //(Acceptable) Actor range for AP Firmware - driver I/F 966 #define CFG_HCF_OPT 0x082C //HCF (Compile time) options 967 #endif // MSF_COMPONENT_ID 968 969 #define CFG_REG_MB 0x0830 //Register Mail Box 970 #define CFG_MB_ASSERT 0x0831 //Assert information 971 #define CFG_REG_ASSERT_RTNP 0x0832 //(de-)register MSF Assert Callback routine 972 #if (HCF_EXT) & HCF_EXT_INFO_LOG 973 #define CFG_REG_INFO_LOG 0x0839 //(de-)register Info frames to Log 974 #endif // HCF_INFO_LOG 975 #define CFG_CNTL_OPT 0x083A //Control options 976 977 #define CFG_PROG 0x0857 //Program NIC memory 978 #define CFG_PROG_STOP 0x0000 979 #define CFG_PROG_VOLATILE 0x0100 980 //#define CFG_PROG_FLASH 0x0300 //restore if H-II non-volatile is introduced 981 //#define CFG_PROG_SEEPROM 0x1300 //restore if H-II non-volatile is introduced 982 #define CFG_PROG_SEEPROM_READBACK 0x0400 983 984 #define CFG_FW_PRINTF 0x0858 //Related to firmware debug printf functionality 985 #define CFG_FW_PRINTF_BUFFER_LOCATION 0x0859 //Also related to firmware debug printf functionality 986 987 #define CFG_CMD_NIC 0x0860 //Hermes Engineering command 988 #define CFG_CMD_HCF 0x0863 //HCF Engineering command 989 #define CFG_CMD_HCF_REG_ACCESS 0x0000 //Direct register access 990 #define CFG_CMD_HCF_RX_MON 0x0001 //Rx-monitor 991 992 993 /*============================================================= MSF Defined RECORDS ========================*/ 994 #define CFG_ENCRYPT_STRING 0x0900 //transfer encryption info from CPL to MSF 995 #define CFG_AP_MODE 0x0901 //control mode of STAP driver from CPL 996 #define CFG_DRIVER_ENABLE 0x0902 //extend&export En-/Disable facility to Utility 997 #define CFG_PCI_COMMAND 0x0903 //PCI adapter (Ooievaar) structure 998 #define CFG_WOLAS_ENABLE 0x0904 //extend&export En-/Disable WOLAS facility to Utility 999 #define CFG_COUNTRY_STRING 0x0905 //transfer CountryInfo info from CPL to MSF 1000 #define CFG_FW_DUMP 0x0906 //transfer nic memory to utility 1001 #define CFG_POWER_MODE 0x0907 //controls the PM mode of the card 1002 #define CFG_CONNECTION_MODE 0x0908 //controls the mode of the FW (ESS/AP/IBSS/ADHOC) 1003 #define CFG_IFB 0x0909 //byte wise copy of IFB 1004 #define CFG_MSF_TALLIES 0x090A //MSF tallies (int's, rx and tx) 1005 #define CFG_CURRENT_LINK_STATUS 0x090B //Latest link status got through 0xF200 LinkEvent 1006 1007 /*============================================================ INFORMATION FRAMES =========================*/ 1008 #define CFG_INFO_FRAME_MIN 0xF000 //lowest value representing an Informatio Frame 1009 1010 #define CFG_TALLIES 0xF100 //Communications Tallies 1011 #define CFG_SCAN 0xF101 //Scan results 1012 #define CFG_PRS_SCAN 0xF102 //Probe Response Scan results 1013 1014 #define CFG_LINK_STAT 0xF200 //Link Status 1015 /* 1 through 5 are F/W defined values, produced by CFG_LINK_STAT frame 1016 * 1 through 5 are shared by CFG_LINK_STAT, IFB_LinkStat and IFB_DSLinkStat 1017 * 1 plays a double role as CFG_LINK_STAT_CONNECTED and as bit reflecting: 1018 * - connected: ON 1019 * - disconnected: OFF 1020 */ 1021 #define CFG_LINK_STAT_CONNECTED 0x0001 1022 #define CFG_LINK_STAT_DISCONNECTED 0x0002 1023 #define CFG_LINK_STAT_AP_CHANGE 0x0003 1024 #define CFG_LINK_STAT_AP_OOR 0x0004 1025 #define CFG_LINK_STAT_AP_IR 0x0005 1026 #define CFG_LINK_STAT_FW 0x000F //mask to isolate F/W defined bits 1027 //#define CFG_LINK_STAT_TIMER 0x0FF0 //mask to isolate OOR timer 1028 //#define CFG_LINK_STAT_DS_OOR 0x2000 //2000 and up are IFB_LinkStat specific 1029 //#define CFG_LINK_STAT_DS_IR 0x4000 1030 #define CFG_LINK_STAT_CHANGE 0x8000 1031 #define CFG_ASSOC_STAT 0xF201 //Association Status 1032 #define CFG_SECURITY_STAT 0xF202 //Security Status 1033 #define CFG_UPDATED_INFO_RECORD 0xF204 //Updated Info Record 1034 1035 /*============================================================ CONFIGURATION RECORDS ======================*/ 1036 /***********************************************************************************************************/ 1037 1038 /****************************** S T R U C T U R E D E F I N I T I O N S **********************************/ 1039 1040 //Quick&Dirty to get download for DOS ODI Hermes-II running typedef LTV_STRCT FAR * LTVP; 1041 typedef LTV_STRCT FAR * LTVP; // i.s.o #define LTVP LTV_STRCT FAR * 1042 1043 #if defined WVLAN_42 || defined WVLAN_43 //;?keepup with legacy a little while longer (4aug2003) 1044 typedef struct DUI_STRCT { /* "legacy", still used by WVLAN42/43, NDIS drivers use WLAPI */ 1045 void FAR *ifbp; /* Pointer to IFB 1046 * returned from MSF to USF by uil_connect 1047 * passed from USF to MSF as a "magic cookie" by all other UIL function calls 1048 */ 1049 hcf_16 stat; // status returned from MSF to USF 1050 hcf_16 fun; // command code from USF to MSF 1051 LTV_STRCT ltv; /* LTV structure 1052 *** during uil_put_info: 1053 * the L, T and V-fields carry information from USF to MSF 1054 *** during uil_get_info: 1055 * the L and T fields carry information from USF to MSF 1056 * the L and V-fields carry information from MSF to USF 1057 */ 1058 } DUI_STRCT; 1059 typedef DUI_STRCT FAR * DUIP; 1060 #endif //defined WVLAN_42 || defined WVLAN_43 //;?keepup with legacy a liitle while longer (4aug2003) 1061 1062 1063 typedef struct CFG_CMD_NIC_STRCT { // CFG_CMD_NIC (0x0860) Hermes Engineering command 1064 hcf_16 len; //default length of RID 1065 hcf_16 typ; //RID identification as defined by Hermes 1066 hcf_16 cmd; //Command code (0x003F) and control bits (0xFFC0) 1067 hcf_16 parm0; //parameters for Hermes Param0 register 1068 hcf_16 parm1; //parameters for Hermes Param1 register 1069 hcf_16 parm2; //parameters for Hermes Param2 register 1070 hcf_16 stat; //result code from Hermes Status register 1071 hcf_16 resp0; //responses from Hermes Resp0 register 1072 hcf_16 resp1; //responses from Hermes Resp1 register 1073 hcf_16 resp2; //responses from Hermes Resp2 register 1074 hcf_16 hcf_stat; //result code from cmd_exe routine 1075 hcf_16 ifb_err_cmd; //IFB_ErrCmd 1076 hcf_16 ifb_err_qualifier; //IFB_ErrQualifier 1077 } CFG_CMD_NIC_STRCT; 1078 1079 1080 typedef struct CFG_DRV_INFO_STRCT { //CFG_DRV_INFO (0x0825) driver information 1081 hcf_16 len; //default length of RID 1082 hcf_16 typ; //RID identification as defined by Hermes 1083 hcf_8 driver_name[8]; //Driver name, 8 bytes, right zero padded 1084 hcf_16 driver_version; //BCD 2 digit major and 2 digit minor driver version 1085 hcf_16 HCF_version; //BCD 2 digit major and 2 digit minor HCF version 1086 hcf_16 driver_stat; // 1087 hcf_16 IO_address; //base IO address used by NIC 1088 hcf_16 IO_range; //range of IO addresses used by NIC 1089 hcf_16 IRQ_number; //Interrupt used by NIC 1090 hcf_16 card_stat; /*NIC status 1091 @* 0x8000 Card present 1092 @* 0x4000 Card Enabled 1093 @* 0x2000 Driver incompatible with NIC Primary Functions 1094 @* 0x1000 Driver incompatible with NIC Station Functions */ 1095 hcf_16 frame_type; /*Frame type 1096 @* 0x000 802.3 1097 @* 0x008 802.11 */ 1098 hcf_32 drv_info; /*driver specific info 1099 * CE: virtual I/O base */ 1100 }CFG_DRV_INFO_STRCT; 1101 1102 #define COMP_ID_FW_PRI 21 //Primary Functions Firmware 1103 #define COMP_ID_FW_INTERMEDIATE 22 //Intermediate Functions Firmware 1104 #define COMP_ID_FW_STA 31 //Station Functions Firmware 1105 #define COMP_ID_FW_AP 32 //AP Functions Firmware 1106 #define COMP_ID_FW_AP_FAKE 331 //AP Functions Firmware 1107 1108 #define COMP_ID_MINIPORT_NDIS_31 41 //Windows 9x/NT Miniport NDIS 3.1 1109 #define COMP_ID_PACKET 42 //Packet 1110 #define COMP_ID_ODI_16 43 //DOS ODI 1111 #define COMP_ID_ODI_32 44 //32-bits ODI 1112 #define COMP_ID_MAC_OS 45 //Macintosh OS 1113 #define COMP_ID_WIN_CE 46 //Windows CE Miniport 1114 //#define COMP_ID_LINUX_PD 47 //Linux, HCF-light based, MSF source code in Public Domain 1115 #define COMP_ID_MINIPORT_NDIS_50 48 //Windows 9x/NT Miniport NDIS 5.0 1116 #define COMP_ID_LINUX 49 /*Linux, GPL'ed HCF based, full source code in Public Domain 1117 *thanks to Andreas Neuhaus */ 1118 #define COMP_ID_QNX 50 //QNX 1119 #define COMP_ID_MINIPORT_NDIS_50_USB 51 //Windows 9x/NT Miniport NDIS 4.0 1120 #define COMP_ID_MINIPORT_NDIS_40 52 //Windows 9x/NT Miniport NDIS 4.0 1121 #define COMP_ID_VX_WORKS_ENDSTA 53 // VxWorks END Station driver 1122 #define COMP_ID_VX_WORKS_ENDAP 54 // VxWorks END Access Point driver 1123 //;?#define COMP_ID_MAC_OS_???? 55 //;?check with HM 1124 #define COMP_ID_VX_WORKS_END 56 // VxWorks END Station/Access Point driver 1125 // 57 //NucleusOS@ARM Driver. 1126 #define COMP_ID_WSU 63 /* WaveLAN Station Firmware Update utility 1127 * variant 1: Windows 1128 * variant 2: DOS 1129 */ 1130 #define COMP_ID_AP1 81 //WaveLAN/IEEE AP 1131 #define COMP_ID_EC 83 //WaveLAN/IEEE Ethernet Converter 1132 #define COMP_ID_UBL 87 //USB Boot Loader 1133 1134 #define COMP_ROLE_SUPL 0x00 //supplier 1135 #define COMP_ROLE_ACT 0x01 //actor 1136 1137 //Supplier - actor 1138 #define COMP_ID_MFI 0x01 //Modem - Firmware I/F 1139 #define COMP_ID_CFI 0x02 //Controller - Firmware I/F 1140 #define COMP_ID_PRI 0x03 //Primary Firmware - Driver I/F 1141 #define COMP_ID_STA 0x04 //Station Firmware - Driver I/F 1142 #define COMP_ID_DUI 0x05 //Driver - Utility I/F 1143 #define COMP_ID_HSI 0x06 //H/W - Driver I/F 1144 #define COMP_ID_DAI 0x07 //API - Driver I/F 1145 #define COMP_ID_APF 0x08 //H/W - Driver I/F 1146 #define COMP_ID_INT 0x09 //Intermediate FW - Driver I/F 1147 1148 #ifdef HCF_LEGACY 1149 #define HCF_ACT_ACS_SCAN HCF_ACT_PRS_SCAN 1150 #define UIL_ACT_ACS_SCAN UIL_ACT_PRS_SCAN 1151 #define MDD_ACT_ACS_SCAN MDD_ACT_PRS_SCAN 1152 #define CFG_ACS_SCAN CFG_PRS_SCAN 1153 #endif // HCF_LEGACY 1154 1155 #endif // MDD_H 1156 1157