1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. 7 */ 8 9 10 #ifndef _ASM_IA64_SN_BTE_H 11 #define _ASM_IA64_SN_BTE_H 12 13 #include <linux/timer.h> 14 #include <linux/spinlock.h> 15 #include <linux/cache.h> 16 #include <asm/sn/pda.h> 17 #include <asm/sn/types.h> 18 #include <asm/sn/shub_mmr.h> 19 20 #define IBCT_NOTIFY (0x1UL << 4) 21 #define IBCT_ZFIL_MODE (0x1UL << 0) 22 23 /* #define BTE_DEBUG */ 24 /* #define BTE_DEBUG_VERBOSE */ 25 26 #ifdef BTE_DEBUG 27 # define BTE_PRINTK(x) printk x /* Terse */ 28 # ifdef BTE_DEBUG_VERBOSE 29 # define BTE_PRINTKV(x) printk x /* Verbose */ 30 # else 31 # define BTE_PRINTKV(x) 32 # endif /* BTE_DEBUG_VERBOSE */ 33 #else 34 # define BTE_PRINTK(x) 35 # define BTE_PRINTKV(x) 36 #endif /* BTE_DEBUG */ 37 38 39 /* BTE status register only supports 16 bits for length field */ 40 #define BTE_LEN_BITS (16) 41 #define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) 42 #define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT) 43 44 45 /* Define hardware */ 46 #define BTES_PER_NODE (is_shub2() ? 4 : 2) 47 #define MAX_BTES_PER_NODE 4 48 49 #define BTE2OFF_CTRL 0 50 #define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) 51 #define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) 52 #define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) 53 54 #define BTE_BASE_ADDR(interface) \ 55 (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ 56 (interface == 1) ? SH2_BT_ENG_CSR_1 : \ 57 (interface == 2) ? SH2_BT_ENG_CSR_2 : \ 58 SH2_BT_ENG_CSR_3 \ 59 : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) 60 61 #define BTE_SOURCE_ADDR(base) \ 62 (is_shub2() ? base + (BTE2OFF_SRC/8) \ 63 : base + (BTEOFF_SRC/8)) 64 65 #define BTE_DEST_ADDR(base) \ 66 (is_shub2() ? base + (BTE2OFF_DEST/8) \ 67 : base + (BTEOFF_DEST/8)) 68 69 #define BTE_CTRL_ADDR(base) \ 70 (is_shub2() ? base + (BTE2OFF_CTRL/8) \ 71 : base + (BTEOFF_CTRL/8)) 72 73 #define BTE_NOTIF_ADDR(base) \ 74 (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ 75 : base + (BTEOFF_NOTIFY/8)) 76 77 /* Define hardware modes */ 78 #define BTE_NOTIFY IBCT_NOTIFY 79 #define BTE_NORMAL BTE_NOTIFY 80 #define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) 81 /* Use a reserved bit to let the caller specify a wait for any BTE */ 82 #define BTE_WACQUIRE 0x4000 83 /* Use the BTE on the node with the destination memory */ 84 #define BTE_USE_DEST (BTE_WACQUIRE << 1) 85 /* Use any available BTE interface on any node for the transfer */ 86 #define BTE_USE_ANY (BTE_USE_DEST << 1) 87 /* macro to force the IBCT0 value valid */ 88 #define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) 89 90 #define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) 91 #define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) 92 #define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) 93 94 /* 95 * Some macros to simplify reading. 96 * Start with macros to locate the BTE control registers. 97 */ 98 #define BTE_LNSTAT_LOAD(_bte) \ 99 HUB_L(_bte->bte_base_addr) 100 #define BTE_LNSTAT_STORE(_bte, _x) \ 101 HUB_S(_bte->bte_base_addr, (_x)) 102 #define BTE_SRC_STORE(_bte, _x) \ 103 ({ \ 104 u64 __addr = ((_x) & ~AS_MASK); \ 105 if (is_shub2()) \ 106 __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ 107 HUB_S(_bte->bte_source_addr, __addr); \ 108 }) 109 #define BTE_DEST_STORE(_bte, _x) \ 110 ({ \ 111 u64 __addr = ((_x) & ~AS_MASK); \ 112 if (is_shub2()) \ 113 __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ 114 HUB_S(_bte->bte_destination_addr, __addr); \ 115 }) 116 #define BTE_CTRL_STORE(_bte, _x) \ 117 HUB_S(_bte->bte_control_addr, (_x)) 118 #define BTE_NOTIF_STORE(_bte, _x) \ 119 ({ \ 120 u64 __addr = ia64_tpa((_x) & ~AS_MASK); \ 121 if (is_shub2()) \ 122 __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ 123 HUB_S(_bte->bte_notify_addr, __addr); \ 124 }) 125 126 #define BTE_START_TRANSFER(_bte, _len, _mode) \ 127 is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ 128 : BTE_LNSTAT_STORE(_bte, _len); \ 129 BTE_CTRL_STORE(_bte, _mode) 130 131 /* Possible results from bte_copy and bte_unaligned_copy */ 132 /* The following error codes map into the BTE hardware codes 133 * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses 134 * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero 135 * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error 136 * codes to give the following error codes. 137 */ 138 #define BTEFAIL_OFFSET 1 139 140 typedef enum { 141 BTE_SUCCESS, /* 0 is success */ 142 BTEFAIL_DIR, /* Directory error due to IIO access*/ 143 BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ 144 BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ 145 BTEFAIL_ACCESS, /* access error (protection violation) */ 146 BTEFAIL_PWERR, /* Partial Write Error */ 147 BTEFAIL_PRERR, /* Partial Read Error */ 148 BTEFAIL_TOUT, /* CRB Time out */ 149 BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ 150 BTEFAIL_NOTAVAIL, /* BTE not available */ 151 } bte_result_t; 152 153 #define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ 154 #define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ 155 #define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ 156 #define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ 157 #define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ 158 #define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ 159 #define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ 160 161 #define BTE_ERR_BITS 0x3FUL 162 #define BTE_ERR_SHIFT 36 163 #define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) 164 165 #define BTE_ERROR_RETRY(value) \ 166 (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ 167 : (value != BTEFAIL_TOUT)) 168 169 /* 170 * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() 171 */ 172 #define BTE_SHUB2_ERROR(_status) \ 173 ((_status & BTE_ERR_MASK) \ 174 ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ 175 : _status) 176 177 #define BTE_GET_ERROR_STATUS(_status) \ 178 (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) 179 180 #define BTE_VALID_SH2_ERROR(value) \ 181 ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) 182 183 /* 184 * Structure defining a bte. An instance of this 185 * structure is created in the nodepda for each 186 * bte on that node (as defined by BTES_PER_NODE) 187 * This structure contains everything necessary 188 * to work with a BTE. 189 */ 190 struct bteinfo_s { 191 volatile u64 notify ____cacheline_aligned; 192 u64 *bte_base_addr ____cacheline_aligned; 193 u64 *bte_source_addr; 194 u64 *bte_destination_addr; 195 u64 *bte_control_addr; 196 u64 *bte_notify_addr; 197 spinlock_t spinlock; 198 cnodeid_t bte_cnode; /* cnode */ 199 int bte_error_count; /* Number of errors encountered */ 200 int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ 201 int cleanup_active; /* Interface is locked for cleanup */ 202 volatile bte_result_t bh_error; /* error while processing */ 203 volatile u64 *most_rcnt_na; 204 struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; 205 }; 206 207 208 /* 209 * Function prototypes (functions defined in bte.c, used elsewhere) 210 */ 211 extern bte_result_t bte_copy(u64, u64, u64, u64, void *); 212 extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); 213 extern void bte_error_handler(unsigned long); 214 215 #define bte_zero(dest, len, mode, notification) \ 216 bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) 217 218 /* 219 * The following is the preferred way of calling bte_unaligned_copy 220 * If the copy is fully cache line aligned, then bte_copy is 221 * used instead. Since bte_copy is inlined, this saves a call 222 * stack. NOTE: bte_copy is called synchronously and does block 223 * until the transfer is complete. In order to get the asynch 224 * version of bte_copy, you must perform this check yourself. 225 */ 226 #define BTE_UNALIGNED_COPY(src, dest, len, mode) \ 227 (((len & (L1_CACHE_BYTES - 1)) || \ 228 (src & (L1_CACHE_BYTES - 1)) || \ 229 (dest & (L1_CACHE_BYTES - 1))) ? \ 230 bte_unaligned_copy(src, dest, len, mode) : \ 231 bte_copy(src, dest, len, mode, NULL)) 232 233 234 #endif /* _ASM_IA64_SN_BTE_H */ 235