// SPDX-License-Identifier: GPL-2.0 /* Copyright(c) 2007 - 2011 Realtek Corporation. */ #define _RTL8188E_XMIT_C_ #include "../include/osdep_service.h" #include "../include/drv_types.h" #include "../include/wifi.h" #include "../include/osdep_intf.h" #include "../include/usb_ops.h" #include "../include/rtl8188e_hal.h" s32 rtl8188eu_init_xmit_priv(struct adapter *adapt) { struct xmit_priv *pxmitpriv = &adapt->xmitpriv; tasklet_init(&pxmitpriv->xmit_tasklet, rtl8188eu_xmit_tasklet, (unsigned long)adapt); return _SUCCESS; } static void rtl8188eu_cal_txdesc_chksum(struct tx_desc *ptxdesc) { u16 *usptr = (u16 *)ptxdesc; u32 count = 16; /* (32 bytes / 2 bytes per XOR) => 16 times */ u32 index; u16 checksum = 0; /* Clear first */ ptxdesc->txdw7 &= cpu_to_le32(0xffff0000); for (index = 0; index < count; index++) checksum = checksum ^ le16_to_cpu(*(__le16 *)(usptr + index)); ptxdesc->txdw7 |= cpu_to_le32(0x0000ffff & checksum); } /* Description: In normal chip, we should send some packet to Hw which will be used by Fw */ /* in FW LPS mode. The function is to fill the Tx descriptor of this packets, then */ /* Fw can tell Hw to send these packet derectly. */ void rtl8188e_fill_fake_txdesc(struct adapter *adapt, u8 *desc, u32 BufferLen, u8 ispspoll, u8 is_btqosnull) { struct tx_desc *ptxdesc; /* Clear all status */ ptxdesc = (struct tx_desc *)desc; memset(desc, 0, TXDESC_SIZE); /* offset 0 */ ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); /* own, bFirstSeg, bLastSeg; */ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) << OFFSET_SHT) & 0x00ff0000); /* 32 bytes for TX Desc */ ptxdesc->txdw0 |= cpu_to_le32(BufferLen & 0x0000ffff); /* Buffer size + command header */ /* offset 4 */ ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT << QSEL_SHT) & 0x00001f00); /* Fixed queue of Mgnt queue */ /* Set NAVUSEHDR to prevent Ps-poll AId filed to be changed to error vlaue by Hw. */ if (ispspoll) { ptxdesc->txdw1 |= cpu_to_le32(NAVUSEHDR); } else { ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); /* Hw set sequence number */ ptxdesc->txdw3 |= cpu_to_le32((8 << 28)); /* set bit3 to 1. Suugested by TimChen. 2009.12.29. */ } if (is_btqosnull) ptxdesc->txdw2 |= cpu_to_le32(BIT(23)); /* BT NULL */ /* offset 16 */ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));/* driver uses rate */ /* USB interface drop packet if the checksum of descriptor isn't correct. */ /* Using this checksum can let hardware recovery from packet bulk out error (e.g. Cancel URC, Bulk out error.). */ rtl8188eu_cal_txdesc_chksum(ptxdesc); } static void fill_txdesc_sectype(struct pkt_attrib *pattrib, struct tx_desc *ptxdesc) { if ((pattrib->encrypt > 0) && !pattrib->bswenc) { switch (pattrib->encrypt) { /* SEC_TYPE : 0:NO_ENC,1:WEP40/TKIP,2:WAPI,3:AES */ case _WEP40_: case _WEP104_: ptxdesc->txdw1 |= cpu_to_le32((0x01 << SEC_TYPE_SHT) & 0x00c00000); ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT); break; case _TKIP_: case _TKIP_WTMIC_: ptxdesc->txdw1 |= cpu_to_le32((0x01 << SEC_TYPE_SHT) & 0x00c00000); ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT); break; case _AES_: ptxdesc->txdw1 |= cpu_to_le32((0x03 << SEC_TYPE_SHT) & 0x00c00000); ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT); break; case _NO_PRIVACY_: default: break; } } } static void fill_txdesc_vcs(struct pkt_attrib *pattrib, __le32 *pdw) { switch (pattrib->vcs_mode) { case RTS_CTS: *pdw |= cpu_to_le32(RTS_EN); break; case CTS_TO_SELF: *pdw |= cpu_to_le32(CTS_2_SELF); break; case NONE_VCS: default: break; } if (pattrib->vcs_mode) { *pdw |= cpu_to_le32(HW_RTS_EN); /* Set RTS BW */ if (pattrib->ht_en) { *pdw |= (pattrib->bwmode & HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(27)) : 0; if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) *pdw |= cpu_to_le32((0x01 << 28) & 0x30000000); else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) *pdw |= cpu_to_le32((0x02 << 28) & 0x30000000); else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) *pdw |= 0; else *pdw |= cpu_to_le32((0x03 << 28) & 0x30000000); } } } static void fill_txdesc_phy(struct pkt_attrib *pattrib, __le32 *pdw) { if (pattrib->ht_en) { *pdw |= (pattrib->bwmode & HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(25)) : 0; if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) *pdw |= cpu_to_le32((0x01 << DATA_SC_SHT) & 0x003f0000); else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) *pdw |= cpu_to_le32((0x02 << DATA_SC_SHT) & 0x003f0000); else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) *pdw |= 0; else *pdw |= cpu_to_le32((0x03 << DATA_SC_SHT) & 0x003f0000); } } static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt) { int pull = 0; uint qsel; u8 data_rate, pwr_status, offset; struct adapter *adapt = pxmitframe->padapter; struct pkt_attrib *pattrib = &pxmitframe->attrib; struct hal_data_8188e *haldata = &adapt->haldata; struct tx_desc *ptxdesc = (struct tx_desc *)pmem; struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv; struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; memset(ptxdesc, 0, sizeof(struct tx_desc)); /* 4 offset 0 */ ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); ptxdesc->txdw0 |= cpu_to_le32(sz & 0x0000ffff);/* update TXPKTSIZE */ offset = TXDESC_SIZE + OFFSET_SZ; ptxdesc->txdw0 |= cpu_to_le32(((offset) << OFFSET_SHT) & 0x00ff0000);/* 32 bytes for TX Desc */ if (is_multicast_ether_addr(pattrib->ra)) ptxdesc->txdw0 |= cpu_to_le32(BMC); /* pkt_offset, unit:8 bytes padding */ if (pxmitframe->pkt_offset > 0) ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000); /* driver uses rate */ ptxdesc->txdw4 |= cpu_to_le32(USERATE);/* rate control always by driver */ if ((pxmitframe->frame_tag & 0x0f) == DATA_FRAMETAG) { /* offset 4 */ ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3F); qsel = (uint)(pattrib->qsel & 0x0000001f); ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00); ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000F0000); fill_txdesc_sectype(pattrib, ptxdesc); if (pattrib->ampdu_en) { ptxdesc->txdw2 |= cpu_to_le32(AGG_EN);/* AGG EN */ ptxdesc->txdw6 = cpu_to_le32(0x6666f800); } else { ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */ } /* offset 8 */ /* offset 12 */ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0FFF0000); /* offset 16 , offset 20 */ if (pattrib->qos_en) ptxdesc->txdw4 |= cpu_to_le32(QOS);/* QoS */ /* offset 20 */ if (pxmitframe->agg_num > 1) ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << USB_TXAGG_NUM_SHT) & 0xFF000000); if ((pattrib->ether_type != 0x888e) && (pattrib->ether_type != 0x0806) && (pattrib->ether_type != 0x88b4) && (pattrib->dhcp_pkt != 1)) { /* Non EAP & ARP & DHCP type data packet */ fill_txdesc_vcs(pattrib, &ptxdesc->txdw4); fill_txdesc_phy(pattrib, &ptxdesc->txdw4); ptxdesc->txdw4 |= cpu_to_le32(0x00000008);/* RTS Rate=24M */ ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);/* DATA/RTS Rate FB LMT */ if (pattrib->ht_en) { if (ODM_RA_GetShortGI_8188E(&haldata->odmpriv, pattrib->mac_id)) ptxdesc->txdw5 |= cpu_to_le32(SGI);/* SGI */ } data_rate = ODM_RA_GetDecisionRate_8188E(&haldata->odmpriv, pattrib->mac_id); ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F); pwr_status = ODM_RA_GetHwPwrStatus_8188E(&haldata->odmpriv, pattrib->mac_id); ptxdesc->txdw4 |= cpu_to_le32((pwr_status & 0x7) << PWR_STATUS_SHT); } else { /* EAP data packet and ARP packet and DHCP. */ /* Use the 1M data rate to send the EAP/ARP packet. */ /* This will maybe make the handshake smooth. */ ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */ if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT) ptxdesc->txdw4 |= cpu_to_le32(BIT(24));/* DATA_SHORT */ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); } } else if ((pxmitframe->frame_tag & 0x0f) == MGNT_FRAMETAG) { /* offset 4 */ ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3f); qsel = (uint)(pattrib->qsel & 0x0000001f); ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00); ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000f0000); /* offset 8 */ /* CCX-TXRPT ack for xmit mgmt frames. */ if (pxmitframe->ack_report) ptxdesc->txdw2 |= cpu_to_le32(BIT(19)); /* offset 12 */ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0FFF0000); /* offset 20 */ ptxdesc->txdw5 |= cpu_to_le32(RTY_LMT_EN);/* retry limit enable */ if (pattrib->retry_ctrl) ptxdesc->txdw5 |= cpu_to_le32(0x00180000);/* retry limit = 6 */ else ptxdesc->txdw5 |= cpu_to_le32(0x00300000);/* retry limit = 12 */ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); } else if ((pxmitframe->frame_tag & 0x0f) != TXAGG_FRAMETAG) { /* offset 4 */ ptxdesc->txdw1 |= cpu_to_le32((4) & 0x3f);/* CAM_ID(MAC_ID) */ ptxdesc->txdw1 |= cpu_to_le32((6 << RATE_ID_SHT) & 0x000f0000);/* raid */ /* offset 8 */ /* offset 12 */ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0fff0000); /* offset 20 */ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); } /* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */ /* (1) The sequence number of each non-Qos frame / broadcast / multicast / */ /* mgnt frame should be controlled by Hw because Fw will also send null data */ /* which we cannot control when Fw LPS enable. */ /* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */ /* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */ /* (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */ /* 2010.06.23. Added by tynli. */ if (!pattrib->qos_en) { ptxdesc->txdw3 |= cpu_to_le32(EN_HWSEQ); /* Hw set sequence number */ ptxdesc->txdw4 |= cpu_to_le32(HW_SSN); /* Hw set sequence number */ } ODM_SetTxAntByTxInfo_88E(&haldata->odmpriv, pmem, pattrib->mac_id); rtl8188eu_cal_txdesc_chksum(ptxdesc); return pull; } /* for non-agg data frame or management frame */ static s32 rtw_dump_xframe(struct adapter *adapt, struct xmit_frame *pxmitframe) { s32 ret = _SUCCESS; s32 inner_ret = _SUCCESS; int t, sz, w_sz, pull = 0; u8 *mem_addr; u32 ff_hwaddr; struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf; struct pkt_attrib *pattrib = &pxmitframe->attrib; struct xmit_priv *pxmitpriv = &adapt->xmitpriv; struct security_priv *psecuritypriv = &adapt->securitypriv; if ((pxmitframe->frame_tag == DATA_FRAMETAG) && (pxmitframe->attrib.ether_type != 0x0806) && (pxmitframe->attrib.ether_type != 0x888e) && (pxmitframe->attrib.ether_type != 0x88b4) && (pxmitframe->attrib.dhcp_pkt != 1)) rtw_issue_addbareq_cmd(adapt, pxmitframe); mem_addr = pxmitframe->buf_addr; for (t = 0; t < pattrib->nr_frags; t++) { if (inner_ret != _SUCCESS && ret == _SUCCESS) ret = _FAIL; if (t != (pattrib->nr_frags - 1)) { sz = pxmitpriv->frag_len; sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len); } else { /* no frag */ sz = pattrib->last_txcmdsz; } pull = update_txdesc(pxmitframe, mem_addr, sz, false); if (pull) { mem_addr += PACKET_OFFSET_SZ; /* pull txdesc head */ pxmitframe->buf_addr = mem_addr; w_sz = sz + TXDESC_SIZE; } else { w_sz = sz + TXDESC_SIZE + PACKET_OFFSET_SZ; } ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe); inner_ret = rtw_write_port(adapt, ff_hwaddr, w_sz, (unsigned char *)pxmitbuf); rtw_count_tx_stats(adapt, pxmitframe, sz); mem_addr += w_sz; mem_addr = PTR_ALIGN(mem_addr, 4); } rtw_free_xmitframe(pxmitpriv, pxmitframe); if (ret != _SUCCESS) rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN); return ret; } static u32 xmitframe_need_length(struct xmit_frame *pxmitframe) { struct pkt_attrib *pattrib = &pxmitframe->attrib; u32 len = 0; /* no consider fragement */ len = pattrib->hdrlen + pattrib->iv_len + SNAP_SIZE + sizeof(u16) + pattrib->pktlen + ((pattrib->bswenc) ? pattrib->icv_len : 0); if (pattrib->encrypt == _TKIP_) len += 8; return len; } bool rtl8188eu_xmitframe_complete(struct adapter *adapt, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) { struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(adapt); struct xmit_frame *pxmitframe = NULL; struct xmit_frame *pfirstframe = NULL; /* aggregate variable */ struct hw_xmit *phwxmit; struct sta_info *psta = NULL; struct tx_servq *ptxservq = NULL; struct list_head *xmitframe_plist = NULL, *xmitframe_phead = NULL; u32 pbuf; /* next pkt address */ u32 pbuf_tail; /* last pkt tail */ u32 len; /* packet length, except TXDESC_SIZE and PKT_OFFSET */ u32 bulksize; u8 desc_cnt; u32 bulkptr; /* dump frame variable */ u32 ff_hwaddr; if (pdvobjpriv->pusbdev->speed == USB_SPEED_HIGH) bulksize = USB_HIGH_SPEED_BULK_SIZE; else bulksize = USB_FULL_SPEED_BULK_SIZE; /* check xmitbuffer is ok */ if (!pxmitbuf) { pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); if (!pxmitbuf) return false; } /* 3 1. pick up first frame */ rtw_free_xmitframe(pxmitpriv, pxmitframe); pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry); if (!pxmitframe) { /* no more xmit frame, release xmit buffer */ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); return false; } pxmitframe->pxmitbuf = pxmitbuf; pxmitframe->buf_addr = pxmitbuf->pbuf; pxmitbuf->priv_data = pxmitframe; pxmitframe->agg_num = 1; /* alloc xmitframe should assign to 1. */ pxmitframe->pkt_offset = 1; /* first frame of aggregation, reserve offset */ rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe); /* always return ndis_packet after rtw_xmitframe_coalesce */ rtw_xmit_complete(adapt, pxmitframe); /* 3 2. aggregate same priority and same DA(AP or STA) frames */ pfirstframe = pxmitframe; len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE + (pfirstframe->pkt_offset * PACKET_OFFSET_SZ); pbuf_tail = len; pbuf = round_up(pbuf_tail, 8); /* check pkt amount in one bulk */ desc_cnt = 0; bulkptr = bulksize; if (pbuf < bulkptr) { desc_cnt++; } else { desc_cnt = 0; bulkptr = ((pbuf / bulksize) + 1) * bulksize; /* round to next bulksize */ } /* dequeue same priority packet from station tx queue */ psta = pfirstframe->attrib.psta; switch (pfirstframe->attrib.priority) { case 1: case 2: ptxservq = &psta->sta_xmitpriv.bk_q; phwxmit = pxmitpriv->hwxmits + 3; break; case 4: case 5: ptxservq = &psta->sta_xmitpriv.vi_q; phwxmit = pxmitpriv->hwxmits + 1; break; case 6: case 7: ptxservq = &psta->sta_xmitpriv.vo_q; phwxmit = pxmitpriv->hwxmits; break; case 0: case 3: default: ptxservq = &psta->sta_xmitpriv.be_q; phwxmit = pxmitpriv->hwxmits + 2; break; } spin_lock_bh(&pxmitpriv->lock); xmitframe_phead = get_list_head(&ptxservq->sta_pending); xmitframe_plist = xmitframe_phead->next; while (xmitframe_phead != xmitframe_plist) { pxmitframe = container_of(xmitframe_plist, struct xmit_frame, list); xmitframe_plist = xmitframe_plist->next; pxmitframe->agg_num = 0; /* not first frame of aggregation */ pxmitframe->pkt_offset = 0; /* not first frame of aggregation, no need to reserve offset */ len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE + (pxmitframe->pkt_offset * PACKET_OFFSET_SZ); if (pbuf + len > MAX_XMITBUF_SZ) { pxmitframe->agg_num = 1; pxmitframe->pkt_offset = 1; break; } list_del_init(&pxmitframe->list); ptxservq->qcnt--; phwxmit->accnt--; pxmitframe->buf_addr = pxmitbuf->pbuf + pbuf; rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe); /* always return ndis_packet after rtw_xmitframe_coalesce */ rtw_xmit_complete(adapt, pxmitframe); /* (len - TXDESC_SIZE) == pxmitframe->attrib.last_txcmdsz */ update_txdesc(pxmitframe, pxmitframe->buf_addr, pxmitframe->attrib.last_txcmdsz, true); /* don't need xmitframe any more */ rtw_free_xmitframe(pxmitpriv, pxmitframe); /* handle pointer and stop condition */ pbuf_tail = pbuf + len; pbuf = round_up(pbuf_tail, 8); pfirstframe->agg_num++; if (MAX_TX_AGG_PACKET_NUMBER == pfirstframe->agg_num) break; if (pbuf < bulkptr) { desc_cnt++; if (desc_cnt == USB_TXAGG_DESC_NUM) break; } else { desc_cnt = 0; bulkptr = ((pbuf / bulksize) + 1) * bulksize; } } /* end while (aggregate same priority and same DA(AP or STA) frames) */ if (list_empty(&ptxservq->sta_pending.queue)) list_del_init(&ptxservq->tx_pending); spin_unlock_bh(&pxmitpriv->lock); if ((pfirstframe->attrib.ether_type != 0x0806) && (pfirstframe->attrib.ether_type != 0x888e) && (pfirstframe->attrib.ether_type != 0x88b4) && (pfirstframe->attrib.dhcp_pkt != 1)) rtw_issue_addbareq_cmd(adapt, pfirstframe); /* 3 3. update first frame txdesc */ if ((pbuf_tail % bulksize) == 0) { /* remove pkt_offset */ pbuf_tail -= PACKET_OFFSET_SZ; pfirstframe->buf_addr += PACKET_OFFSET_SZ; pfirstframe->pkt_offset--; } update_txdesc(pfirstframe, pfirstframe->buf_addr, pfirstframe->attrib.last_txcmdsz, true); /* 3 4. write xmit buffer to USB FIFO */ ff_hwaddr = rtw_get_ff_hwaddr(pfirstframe); rtw_write_port(adapt, ff_hwaddr, pbuf_tail, (u8 *)pxmitbuf); /* 3 5. update statisitc */ pbuf_tail -= (pfirstframe->agg_num * TXDESC_SIZE); pbuf_tail -= (pfirstframe->pkt_offset * PACKET_OFFSET_SZ); rtw_count_tx_stats(adapt, pfirstframe, pbuf_tail); rtw_free_xmitframe(pxmitpriv, pfirstframe); return true; } static s32 xmitframe_direct(struct adapter *adapt, struct xmit_frame *pxmitframe) { s32 res = _SUCCESS; res = rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe); if (res == _SUCCESS) rtw_dump_xframe(adapt, pxmitframe); return res; } /* * Return * true dump packet directly * false enqueue packet */ static s32 pre_xmitframe(struct adapter *adapt, struct xmit_frame *pxmitframe) { s32 res; struct xmit_buf *pxmitbuf = NULL; struct xmit_priv *pxmitpriv = &adapt->xmitpriv; struct pkt_attrib *pattrib = &pxmitframe->attrib; struct mlme_priv *pmlmepriv = &adapt->mlmepriv; spin_lock_bh(&pxmitpriv->lock); if (rtw_txframes_sta_ac_pending(adapt, pattrib) > 0) goto enqueue; if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY | _FW_UNDER_LINKING)) goto enqueue; pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); if (!pxmitbuf) goto enqueue; spin_unlock_bh(&pxmitpriv->lock); pxmitframe->pxmitbuf = pxmitbuf; pxmitframe->buf_addr = pxmitbuf->pbuf; pxmitbuf->priv_data = pxmitframe; if (xmitframe_direct(adapt, pxmitframe) != _SUCCESS) { rtw_free_xmitbuf(pxmitpriv, pxmitbuf); rtw_free_xmitframe(pxmitpriv, pxmitframe); } return true; enqueue: res = rtw_xmitframe_enqueue(adapt, pxmitframe); spin_unlock_bh(&pxmitpriv->lock); if (res != _SUCCESS) { rtw_free_xmitframe(pxmitpriv, pxmitframe); /* Trick, make the statistics correct */ pxmitpriv->tx_pkts--; pxmitpriv->tx_drop++; return true; } return false; } s32 rtl8188eu_mgnt_xmit(struct adapter *adapt, struct xmit_frame *pmgntframe) { return rtw_dump_xframe(adapt, pmgntframe); } /* * Return * true dump packet directly ok * false temporary can't transmit packets to hardware */ s32 rtl8188eu_hal_xmit(struct adapter *adapt, struct xmit_frame *pxmitframe) { return pre_xmitframe(adapt, pxmitframe); }