/* * OHCI HCD (Host Controller Driver) for USB. * * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2002 David Brownell * * [ Initialisation is based on Linus' ] * [ uhci code and gregs ohci fragments ] * [ (C) Copyright 1999 Linus Torvalds ] * [ (C) Copyright 1999 Gregory P. Smith] * * PCI Bus Glue * * This file is licenced under the GPL. */ #ifndef CONFIG_PCI #error "This file is PCI bus glue. CONFIG_PCI must be defined." #endif #include #include /*-------------------------------------------------------------------------*/ static int broken_suspend(struct usb_hcd *hcd) { device_init_wakeup(&hcd->self.root_hub->dev, 0); return 0; } /* AMD 756, for most chips (early revs), corrupts register * values on read ... so enable the vendor workaround. */ static int ohci_quirk_amd756(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci->flags = OHCI_QUIRK_AMD756; ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); /* also erratum 10 (suspend/resume issues) */ return broken_suspend(hcd); } /* Apple's OHCI driver has a lot of bizarre workarounds * for this chip. Evidently control and bulk lists * can get confused. (B&W G3 models, and ...) */ static int ohci_quirk_opti(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n"); return 0; } /* Check for NSC87560. We have to look at the bridge (fn1) to * identify the USB (fn2). This quirk might apply to more or * even all NSC stuff. */ static int ohci_quirk_ns(struct usb_hcd *hcd) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); struct pci_dev *b; b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1)); if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO && b->vendor == PCI_VENDOR_ID_NS) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci->flags |= OHCI_QUIRK_SUPERIO; ohci_dbg (ohci, "Using NSC SuperIO setup\n"); } pci_dev_put(b); return 0; } /* Check for Compaq's ZFMicro chipset, which needs short * delays before control or bulk queues get re-activated * in finish_unlinks() */ static int ohci_quirk_zfmicro(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci->flags |= OHCI_QUIRK_ZFMICRO; ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n"); return 0; } /* Check for Toshiba SCC OHCI which has big endian registers * and little endian in memory data structures */ static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); /* That chip is only present in the southbridge of some * cell based platforms which are supposed to select * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if * that was the case though. */ #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO ohci->flags |= OHCI_QUIRK_BE_MMIO; ohci_dbg (ohci, "enabled big endian Toshiba quirk\n"); return 0; #else ohci_err (ohci, "unsupported big endian Toshiba quirk\n"); return -ENXIO; #endif } /* Check for NEC chip and apply quirk for allegedly lost interrupts. */ static void ohci_quirk_nec_worker(struct work_struct *work) { struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work); int status; status = ohci_init(ohci); if (status != 0) { ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n", "ohci_init", status); return; } status = ohci_restart(ohci); if (status != 0) ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n", "ohci_restart", status); } static int ohci_quirk_nec(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci->flags |= OHCI_QUIRK_NEC; INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker); ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n"); return 0; } static int ohci_quirk_amd700(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); struct pci_dev *amd_smbus_dev; u8 rev; if (usb_amd_find_chipset_info()) ohci->flags |= OHCI_QUIRK_AMD_PLL; amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); if (!amd_smbus_dev) return 0; rev = amd_smbus_dev->revision; /* SB800 needs pre-fetch fix */ if ((rev >= 0x40) && (rev <= 0x4f)) { ohci->flags |= OHCI_QUIRK_AMD_PREFETCH; ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); } pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; return 0; } static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; u16 misc; pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller); pci_read_config_word(pdev, 0x50, &misc); if (on == 0) pci_write_config_word(pdev, 0x50, misc & 0xfcff); else pci_write_config_word(pdev, 0x50, misc | 0x0300); } /* List of quirks for OHCI */ static const struct pci_device_id ohci_pci_quirks[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c), .driver_data = (unsigned long)ohci_quirk_amd756, }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861), .driver_data = (unsigned long)ohci_quirk_opti, }, { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID), .driver_data = (unsigned long)ohci_quirk_ns, }, { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8), .driver_data = (unsigned long)ohci_quirk_zfmicro, }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6), .driver_data = (unsigned long)ohci_quirk_toshiba_scc, }, { PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB), .driver_data = (unsigned long)ohci_quirk_nec, }, { /* Toshiba portege 4000 */ .vendor = PCI_VENDOR_ID_AL, .device = 0x5237, .subvendor = PCI_VENDOR_ID_TOSHIBA, .subdevice = 0x0004, .driver_data = (unsigned long) broken_suspend, }, { PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152), .driver_data = (unsigned long) broken_suspend, }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397), .driver_data = (unsigned long)ohci_quirk_amd700, }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398), .driver_data = (unsigned long)ohci_quirk_amd700, }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. */ {}, }; static int ohci_pci_reset (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int ret = 0; if (hcd->self.controller) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); const struct pci_device_id *quirk_id; quirk_id = pci_match_id(ohci_pci_quirks, pdev); if (quirk_id != NULL) { int (*quirk)(struct usb_hcd *ohci); quirk = (void *)quirk_id->driver_data; ret = quirk(hcd); } } if (ret == 0) { ohci_hcd_init (ohci); return ohci_init (ohci); } return ret; } static int __devinit ohci_pci_start (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int ret; #ifdef CONFIG_PM /* avoid warnings about unused pdev */ if (hcd->self.controller) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* RWC may not be set for add-in PCI cards, since boot * firmware probably ignored them. This transfers PCI * PM wakeup capabilities. */ if (device_can_wakeup(&pdev->dev)) ohci->hc_control |= OHCI_CTRL_RWC; } #endif /* CONFIG_PM */ ret = ohci_run (ohci); if (ret < 0) { ohci_err (ohci, "can't start\n"); ohci_stop (hcd); } return ret; } #ifdef CONFIG_PM static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; int rc = 0; /* Root hub was already suspended. Disable irq emission and * mark HW unaccessible, bail out if RH has been resumed. Use * the spinlock to properly synchronize with possible pending * RH suspend or resume activity. */ spin_lock_irqsave (&ohci->lock, flags); if (ohci->rh_state != OHCI_RH_SUSPENDED) { rc = -EINVAL; goto bail; } ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); (void)ohci_readl(ohci, &ohci->regs->intrdisable); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); bail: spin_unlock_irqrestore (&ohci->lock, flags); return rc; } static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated) { set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); /* Make sure resume from hibernation re-enumerates everything */ if (hibernated) ohci_usb_reset(hcd_to_ohci(hcd)); ohci_finish_controller_resume(hcd); return 0; } #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ static const struct hc_driver ohci_pci_hc_driver = { .description = hcd_name, .product_desc = "OHCI Host Controller", .hcd_priv_size = sizeof(struct ohci_hcd), /* * generic hardware linkage */ .irq = ohci_irq, .flags = HCD_MEMORY | HCD_USB11, /* * basic lifecycle operations */ .reset = ohci_pci_reset, .start = ohci_pci_start, .stop = ohci_stop, .shutdown = ohci_shutdown, #ifdef CONFIG_PM .pci_suspend = ohci_pci_suspend, .pci_resume = ohci_pci_resume, #endif /* * managing i/o requests and associated device resources */ .urb_enqueue = ohci_urb_enqueue, .urb_dequeue = ohci_urb_dequeue, .endpoint_disable = ohci_endpoint_disable, /* * scheduling support */ .get_frame_number = ohci_get_frame, /* * root hub support */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ static const struct pci_device_id pci_ids [] = { { /* handle any USB OHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), .driver_data = (unsigned long) &ohci_pci_hc_driver, }, { /* The device in the ConneXT I/O hub has no class reg */ PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI), .driver_data = (unsigned long) &ohci_pci_hc_driver, }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE (pci, pci_ids); /* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver ohci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = usb_hcd_pci_shutdown, #ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, #endif };