# # Input core configuration # config SERIO tristate "Serial I/O support" default y help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the * standard AT keyboard and PS/2 mouse * as well as serial mice, Sun keyboards, some joysticks and 6dof devices and more. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called serio. if SERIO config SERIO_I8042 tristate "i8042 PC Keyboard controller" default y depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \ (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN help i8042 is the chip over which the standard AT keyboard and PS/2 mouse are connected to the computer. If you use these devices, you'll need to say Y here. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called i8042. config SERIO_SERPORT tristate "Serial port line discipline" default y help Say Y here if you plan to use an input device (mouse, joystick, tablet, 6dof) that communicates over the RS232 serial (COM) port. More information is available: If unsure, say Y. To compile this driver as a module, choose M here: the module will be called serport. config SERIO_CT82C710 tristate "ct82c710 Aux port controller" depends on X86 help Say Y here if you have a Texas Instruments TravelMate notebook equipped with the ct82c710 chip and want to use a mouse connected to the "QuickPort". If unsure, say N. To compile this driver as a module, choose M here: the module will be called ct82c710. config SERIO_Q40KBD tristate "Q40 keyboard controller" depends on Q40 config SERIO_PARKBD tristate "Parallel port keyboard adapter" depends on PARPORT help Say Y here if you built a simple parallel port adapter to attach an additional AT keyboard, XT keyboard or PS/2 mouse. More information is available: If unsure, say N. To compile this driver as a module, choose M here: the module will be called parkbd. config SERIO_RPCKBD tristate "Acorn RiscPC keyboard controller" depends on ARCH_ACORN default y help Say Y here if you have the Acorn RiscPC and want to use an AT keyboard connected to its keyboard controller. To compile this driver as a module, choose M here: the module will be called rpckbd. config SERIO_AT32PSIF tristate "AVR32 PSIF PS/2 keyboard and mouse controller" depends on AVR32 help Say Y here if you want to use the PSIF peripheral on AVR32 devices and connect a PS/2 keyboard and/or mouse to it. To compile this driver as a module, choose M here: the module will be called at32psif. config SERIO_AMBAKMI tristate "AMBA KMI keyboard controller" depends on ARM_AMBA config SERIO_SA1111 tristate "Intel SA1111 keyboard controller" depends on SA1111 config SERIO_GSCPS2 tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" depends on GSC default y help This driver provides support for the PS/2 ports on PA-RISC machines over which HP PS/2 keyboards and PS/2 mice may be connected. If you use these devices, you'll need to say Y here. It's safe to enable this driver, so if unsure, say Y. To compile this driver as a module, choose M here: the module will be called gscps2. config HP_SDC tristate "HP System Device Controller i8042 Support" depends on (GSC || HP300) && SERIO default y help This option enables support for the "System Device Controller", an i8042 carrying microcode to manage a few miscellaneous devices on some Hewlett Packard systems. The SDC itself contains a 10ms resolution timer/clock capable of delivering interrupts on a periodic and one-shot basis. The SDC may also be connected to a battery-backed real-time clock, a basic audio waveform generator, and an HP-HIL Master Link Controller serving up to seven input devices. By itself this option is rather useless, but enabling it will enable selection of drivers for the abovementioned devices. It is, however, incompatible with the old, reliable HIL keyboard driver, and the new HIL driver is experimental, so if you plan to use a HIL keyboard as your primary keyboard, you may wish to keep using that driver until the new HIL drivers have had more testing. config HIL_MLC tristate "HIL MLC Support (needed for HIL input devices)" depends on HP_SDC config SERIO_PCIPS2 tristate "PCI PS/2 keyboard and PS/2 mouse controller" depends on PCI help Say Y here if you have a Mobility Docking station with PS/2 keyboard and mice ports. To compile this driver as a module, choose M here: the module will be called pcips2. config SERIO_MACEPS2 tristate "SGI O2 MACE PS/2 controller" depends on SGI_IP32 help Say Y here if you have SGI O2 workstation and want to use its PS/2 ports. To compile this driver as a module, choose M here: the module will be called maceps2. config SERIO_LIBPS2 tristate "PS/2 driver library" depends on SERIO_I8042 || SERIO_I8042=n help Say Y here if you are using a driver for device connected to a PS/2 port, such as PS/2 mouse or standard AT keyboard. To compile this driver as a module, choose M here: the module will be called libps2. config SERIO_RAW tristate "Raw access to serio ports" help Say Y here if you want to have raw access to serio ports, such as AUX ports on i8042 keyboard controller. Each serio port that is bound to this driver will be accessible via a char device with major 10 and dynamically allocated minor. The driver will try allocating minor 1 (that historically corresponds to /dev/psaux) first. To bind this driver to a serio port use sysfs interface: echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl To compile this driver as a module, choose M here: the module will be called serio_raw. config SERIO_XILINX_XPS_PS2 tristate "Xilinx XPS PS/2 Controller Support" depends on PPC || MICROBLAZE help This driver supports XPS PS/2 IP from the Xilinx EDK on PowerPC platform. To compile this driver as a module, choose M here: the module will be called xilinx_ps2. config SERIO_ALTERA_PS2 tristate "Altera UP PS/2 controller" help Say Y here if you have Altera University Program PS/2 ports. To compile this driver as a module, choose M here: the module will be called altera_ps2. config SERIO_AMS_DELTA tristate "Amstrad Delta (E3) mailboard support" depends on MACH_AMS_DELTA default y ---help--- Say Y here if you have an E3 and want to use its mailboard, or any standard AT keyboard connected to the mailboard port. When used for the E3 mailboard, a non-standard key table must be loaded from userspace, possibly using udev extras provided keymap helper utility. To compile this driver as a module, choose M here; the module will be called ams_delta_serio. config SERIO_PS2MULT tristate "TQC PS/2 multiplexer" help Say Y here if you have the PS/2 line multiplexer like the one present on TQC boards. To compile this driver as a module, choose M here: the module will be called ps2mult. endif