#ifndef ASMARM_PCI_H
#define ASMARM_PCI_H

#ifdef __KERNEL__

#include <linux/mm.h>
#include <asm/arch/hardware.h>
#include <asm/scatterlist.h>
#include <asm/io.h>

/*
 * For SA-1111 these functions are "magic" and utilize bounce
 * buffers as need to workaround SA-1111 DMA bugs.  They are called in
 * place of their pci_* counterparts when dev_is_sa1111() returns true.
 */
dma_addr_t sa1111_map_single(void *, size_t, int);
void sa1111_unmap_single(dma_addr_t, size_t, int);
int sa1111_map_sg(struct scatterlist *, int, int);
void sa1111_unmap_sg(struct scatterlist *, int, int);
void sa1111_dma_sync_single(dma_addr_t, size_t, int);
void sa1111_dma_sync_sg(struct scatterlist *, int, int);

#ifdef CONFIG_SA1111

#define SA1111_FAKE_PCIDEV ((struct pci_dev *) 1111)

static inline int dev_is_sa1111(const struct pci_dev *dev)
{
	return (dev == SA1111_FAKE_PCIDEV);
}

#else

static inline int dev_is_sa1111(const struct pci_dev *dev) { return 0; }

#endif

/*
 * The PCI address space does equal the physical memory address space.
 * The networking and block device layers use this boolean for bounce
 * buffer decisions.
 */
#define PCI_DMA_BUS_IS_PHYS     (0)


static inline void pcibios_set_master(struct pci_dev *dev)
{
	/* No special bus mastering setup handling */
}

static inline void pcibios_penalize_isa_irq(int irq)
{
	/* We don't do dynamic PCI IRQ allocation */
}

#define pcibios_scan_all_fns()		0

struct pci_dev;

/* Allocate and map kernel buffer using consistent mode DMA for a device.
 * hwdev should be valid struct pci_dev pointer for PCI devices,
 * NULL for PCI-like buses (ISA, EISA).
 * Returns non-NULL cpu-view pointer to the buffer if successful and
 * sets *dma_addrp to the pci side dma address as well, else *dma_addrp
 * is undefined.
 */
extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *handle);

/* Free and unmap a consistent DMA buffer.
 * cpu_addr is what was returned from pci_alloc_consistent,
 * size must be the same as what as passed into pci_alloc_consistent,
 * and likewise dma_addr must be the same as what *dma_addrp was set to.
 *
 * References to the memory and mappings associated with cpu_addr/dma_addr
 * past this call are illegal.
 */
static inline void
pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr,
		    dma_addr_t dma_handle)
{
	consistent_free(vaddr, size, dma_handle);
}

/* Map a single buffer of the indicated size for DMA in streaming mode.
 * The 32-bit bus address to use is returned.
 *
 * Once the device is given the dma address, the device owns this memory
 * until either pci_unmap_single or pci_dma_sync_single is performed.
 */
static inline dma_addr_t
pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
{
	if (dev_is_sa1111(hwdev))
		return sa1111_map_single(ptr, size, direction);

	consistent_sync(ptr, size, direction);
	return virt_to_bus(ptr);
}

/* Unmap a single streaming mode DMA translation.  The dma_addr and size
 * must match what was provided for in a previous pci_map_single call.  All
 * other usages are undefined.
 *
 * After this call, reads by the cpu to the buffer are guarenteed to see
 * whatever the device wrote there.
 */
static inline void
pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction)
{
	if (dev_is_sa1111(hwdev))
		sa1111_unmap_single(dma_addr, size, direction);

	/* nothing to do */
}

/* Whether pci_unmap_{single,page} is a nop depends upon the
 * configuration.
 */
#ifdef CONFIG_SA1111
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
	dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
	__u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME)			\
	((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
	(((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME)			\
	((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
	(((PTR)->LEN_NAME) = (VAL))
#else /* !(CONFIG_SA1111) */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME)		(0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
#endif /* CONFIG_SA1111 */

/* Map a set of buffers described by scatterlist in streaming
 * mode for DMA.  This is the scather-gather version of the
 * above pci_map_single interface.  Here the scatter gather list
 * elements are each tagged with the appropriate dma address
 * and length.  They are obtained via sg_dma_{address,length}(SG).
 *
 * NOTE: An implementation may be able to use a smaller number of
 *       DMA address/length pairs than there are SG table elements.
 *       (for example via virtual mapping capabilities)
 *       The routine returns the number of addr/length pairs actually
 *       used, at most nents.
 *
 * Device ownership issues as mentioned above for pci_map_single are
 * the same here.
 */
static inline int
pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction)
{
	int i;

	if (dev_is_sa1111(hwdev))
		return sa1111_map_sg(sg, nents, direction);

	for (i = 0; i < nents; i++, sg++) {
		char *vaddr = sg->address;

		if (!vaddr)
			vaddr = ((char *)page_address(sg->page)) + sg->offset;

		consistent_sync(vaddr, sg->length, direction);
		sg->dma_address = virt_to_bus(vaddr);
	}

	return nents;
}

/* Unmap a set of streaming mode DMA translations.
 * Again, cpu read rules concerning calls here are the same as for
 * pci_unmap_single() above.
 */
static inline void
pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction)
{
	if (dev_is_sa1111(hwdev)) {
		sa1111_unmap_sg(sg, nents, direction);
		return;
	}

	/* nothing to do */
}

/* Make physical memory consistent for a single
 * streaming mode DMA translation after a transfer.
 *
 * If you perform a pci_map_single() but wish to interrogate the
 * buffer using the cpu, yet do not wish to teardown the PCI dma
 * mapping, you must call this function before doing so.  At the
 * next point you give the PCI dma address back to the card, the
 * device again owns the buffer.
 */
static inline void
pci_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction)
{
	if (dev_is_sa1111(hwdev)) {
	  	sa1111_dma_sync_single(dma_handle, size, direction);
		return;
	}

	consistent_sync(bus_to_virt(dma_handle), size, direction);
}

/* Make physical memory consistent for a set of streaming
 * mode DMA translations after a transfer.
 *
 * The same as pci_dma_sync_single but for a scatter-gather list,
 * same rules and usage.
 */
static inline void
pci_dma_sync_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction)
{
	int i;

 	if (dev_is_sa1111(hwdev)) {
 	  	sa1111_dma_sync_sg(sg, nelems, direction);
 		return;
 	}

	for (i = 0; i < nelems; i++, sg++)
		consistent_sync(sg->address, sg->length, direction);
}

/* Return whether the given PCI device DMA address mask can
 * be supported properly.  For example, if your device can
 * only drive the low 24-bits during PCI bus mastering, then
 * you would pass 0x00ffffff as the mask to this function.
 */
static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
{
	return 1;
}

/* This isn't fine. */
#define pci_dac_dma_supported(pci_dev, mask)	(0)

/* Return the index of the PCI controller for device PDEV. */
#define pci_controller_num(PDEV)	(0)


#if defined(CONFIG_SA1111) && !defined(CONFIG_PCI)
/* SA-1111 needs these prototypes even when !defined(CONFIG_PCI) */

/* kmem_cache style wrapper around pci_alloc_consistent() */
struct pci_pool *pci_pool_create (const char *name, struct pci_dev *dev,
		size_t size, size_t align, size_t allocation, int flags);
void pci_pool_destroy (struct pci_pool *pool);

void *pci_pool_alloc (struct pci_pool *pool, int flags, dma_addr_t *handle);
void pci_pool_free (struct pci_pool *pool, void *vaddr, dma_addr_t addr);
#endif

#endif /* __KERNEL__ */
 
#endif