/* $XFree86$ */ /* $XdotOrg$ */ /* * Global definitions for init.c and init301.c * * Copyright (C) 2001-2004 by Thomas Winischhofer, Vienna, Austria * * If distributed as part of the Linux kernel, the following license terms * apply: * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the named License, * * or any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the Free Software * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA * * Otherwise, the following license terms apply: * * * Redistribution and use in source and binary forms, with or without * * modification, are permitted provided that the following conditions * * are met: * * 1) Redistributions of source code must retain the above copyright * * notice, this list of conditions and the following disclaimer. * * 2) Redistributions in binary form must reproduce the above copyright * * notice, this list of conditions and the following disclaimer in the * * documentation and/or other materials provided with the distribution. * * 3) The name of the author may not be used to endorse or promote products * * derived from this software without specific prior written permission. * * * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Author: Thomas Winischhofer * */ #ifndef _INITDEF_ #define _INITDEF_ #define IS_SIS330 (HwInfo->jChipType == SIS_330) #define IS_SIS550 (HwInfo->jChipType == SIS_550) #define IS_SIS650 (HwInfo->jChipType == SIS_650) /* All versions, incl 651, M65x */ #define IS_SIS740 (HwInfo->jChipType == SIS_740) #define IS_SIS651 (SiS_Pr->SiS_SysFlags & (SF_Is651 | SF_Is652)) #define IS_SISM650 (SiS_Pr->SiS_SysFlags & (SF_IsM650 | SF_IsM652 | SF_IsM653)) #define IS_SIS65x (IS_SIS651 || IS_SISM650) /* Only special versions of 65x */ #define IS_SIS661 (HwInfo->jChipType == SIS_661) #define IS_SIS741 (HwInfo->jChipType == SIS_741) #define IS_SIS660 (HwInfo->jChipType == SIS_660) #define IS_SIS760 (HwInfo->jChipType == SIS_760) #define IS_SIS661741660760 (IS_SIS661 || IS_SIS741 || IS_SIS660 || IS_SIS760) #define IS_SIS650740 ((HwInfo->jChipType >= SIS_650) && (HwInfo->jChipType < SIS_330)) #define IS_SIS550650740 (IS_SIS550 || IS_SIS650740) #define IS_SIS650740660 (IS_SIS650 || IS_SIS740 || IS_SIS661741660760) #define IS_SIS550650740660 (IS_SIS550 || IS_SIS650740660) #define SISGETROMW(x) (ROMAddr[(x)] | (ROMAddr[(x)+1] << 8)) /* SiS_VBType */ #define VB_SIS301 0x0001 #define VB_SIS301B 0x0002 #define VB_SIS302B 0x0004 #define VB_SIS301LV 0x0008 #define VB_SIS302LV 0x0010 #define VB_SIS302ELV 0x0020 #define VB_SIS301C 0x0040 #define VB_NoLCD 0x8000 #define VB_SIS301BLV302BLV (VB_SIS301B|VB_SIS301C|VB_SIS302B|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV) #define VB_SIS301B302B (VB_SIS301B|VB_SIS301C|VB_SIS302B) #define VB_SIS301LV302LV (VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV) #define VB_SISVB (VB_SIS301 | VB_SIS301BLV302BLV) #define VB_SISTMDS (VB_SIS301 | VB_SIS301B302B) #define VB_SISLVDS VB_SIS301LV302LV /* VBInfo */ #define SetSimuScanMode 0x0001 /* CR 30 */ #define SwitchCRT2 0x0002 #define SetCRT2ToAVIDEO 0x0004 #define SetCRT2ToSVIDEO 0x0008 #define SetCRT2ToSCART 0x0010 #define SetCRT2ToLCD 0x0020 #define SetCRT2ToRAMDAC 0x0040 #define SetCRT2ToHiVision 0x0080 /* for SiS bridge */ #define SetCRT2ToCHYPbPr SetCRT2ToHiVision /* for Chrontel */ #define SetNTSCTV 0x0000 /* CR 31 */ #define SetPALTV 0x0100 /* Deprecated here, now in TVMode */ #define SetInSlaveMode 0x0200 #define SetNotSimuMode 0x0400 #define SetNotSimuTVMode SetNotSimuMode #define SetDispDevSwitch 0x0800 #define SetCRT2ToYPbPr525750 0x0800 #define LoadDACFlag 0x1000 #define DisableCRT2Display 0x2000 #define DriverMode 0x4000 #define HotKeySwitch 0x8000 #define SetCRT2ToLCDA 0x8000 /* v-- Needs change in sis_vga.c if changed (GPIO) --v */ #define SetCRT2ToTV (SetCRT2ToYPbPr525750|SetCRT2ToHiVision|SetCRT2ToSCART|SetCRT2ToSVIDEO|SetCRT2ToAVIDEO) #define SetCRT2ToTVNoYPbPrHiVision (SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO) #define SetCRT2ToTVNoHiVision (SetCRT2ToYPbPr525750 | SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO) /* SiS_ModeType */ #define ModeText 0x00 #define ModeCGA 0x01 #define ModeEGA 0x02 #define ModeVGA 0x03 #define Mode15Bpp 0x04 #define Mode16Bpp 0x05 #define Mode24Bpp 0x06 #define Mode32Bpp 0x07 #define ModeInfoFlag 0x07 #define IsTextMode 0x07 #define DACInfoFlag 0x0018 #define MemoryInfoFlag 0x01E0 #define MemorySizeShift 5 /* modeflag */ #define Charx8Dot 0x0200 #define LineCompareOff 0x0400 #define CRT2Mode 0x0800 #define HalfDCLK 0x1000 #define NoSupportSimuTV 0x2000 #define NoSupportLCDScale 0x4000 /* TMDS: No scaling possible (no matter what panel) */ #define DoubleScanMode 0x8000 /* Infoflag */ #define SupportTV 0x0008 #define SupportTV1024 0x0800 #define SupportCHTV 0x0800 #define Support64048060Hz 0x0800 /* Special for 640x480 LCD */ #define SupportHiVision 0x0010 #define SupportYPbPr750p 0x1000 #define SupportLCD 0x0020 #define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */ #define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */ #define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */ #define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */ #define InterlaceMode 0x0080 #define SyncPP 0x0000 #define SyncPN 0x4000 #define SyncNP 0x8000 #define SyncNN 0xc000 /* SetFlag */ #define ProgrammingCRT2 0x0001 #define LowModeTests 0x0002 /* #define TVSimuMode 0x0002 - deprecated */ /* #define RPLLDIV2XO 0x0004 - deprecated */ #define LCDVESATiming 0x0008 #define EnableLVDSDDA 0x0010 #define SetDispDevSwitchFlag 0x0020 #define CheckWinDos 0x0040 #define SetDOSMode 0x0080 /* TVMode flag */ #define TVSetPAL 0x0001 #define TVSetNTSCJ 0x0002 #define TVSetPALM 0x0004 #define TVSetPALN 0x0008 #define TVSetCHOverScan 0x0010 #define TVSetYPbPr525i 0x0020 /* new 0x10 */ #define TVSetYPbPr525p 0x0040 /* new 0x20 */ #define TVSetYPbPr750p 0x0080 /* new 0x40 */ #define TVSetHiVision 0x0100 /* new 0x80; = 1080i, software-wise identical */ #define TVSetTVSimuMode 0x0200 /* new 0x200, prev. 0x800 */ #define TVRPLLDIV2XO 0x0400 /* prev 0x1000 */ #define TVSetNTSC1024 0x0800 /* new 0x100, prev. 0x2000 */ #define TVAspect43 0x2000 #define TVAspect169 0x4000 #define TVAspect43LB 0x8000 /* YPbPr flag (>=315, <661; converted to TVMode) */ #define YPbPr525p 0x0001 #define YPbPr750p 0x0002 #define YPbPr525i 0x0004 #define YPbPrHiVision 0x0008 #define YPbPrModeMask (YPbPr750p | YPbPr525p | YPbPr525i | YPbPrHiVision) /* SysFlags (to identify special versions) */ #define SF_Is651 0x0001 #define SF_IsM650 0x0002 #define SF_Is652 0x0004 #define SF_IsM652 0x0008 #define SF_IsM653 0x0010 #define SF_IsM661 0x0020 #define SF_IsM741 0x0040 #define SF_IsM760 0x0080 #define SF_760LFB 0x8000 /* 760: We have LFB */ /* CR32 (Newer 630, and 315 series) [0] VB connected with CVBS [1] VB connected with SVHS [2] VB connected with SCART [3] VB connected with LCD [4] VB connected with CRT2 (secondary VGA) [5] CRT1 monitor is connected [6] VB connected with Hi-Vision TV [7] <= 330: VB connected with DVI combo connector >= 661: VB connected to YPbPr */ /* CR35 (300 series only) */ #define TVOverScan 0x10 #define TVOverScanShift 4 /* CR35 (661 series only) [0] 1 = PAL, 0 = NTSC [1] 1 = NTSC-J (if D0 = 0) [2] 1 = PALM (if D0 = 1) [3] 1 = PALN (if D0 = 1) [4] 1 = Overscan (Chrontel only) [7:5] (only if D2 in CR38 is set) 000 525i 001 525p 010 750p 011 1080i (or HiVision on 301, 301B) These bits are being translated to TVMode flag. */ /* CR37 [0] Set 24/18 bit (0/1) RGB to LVDS/TMDS transmitter (set by BIOS) [3:1] External chip 300 series: 001 SiS301 (never seen) 010 LVDS 011 LVDS + Tumpion Zurac 100 LVDS + Chrontel 7005 110 Chrontel 7005 315/330 series 001 SiS30x (never seen) 010 LVDS 011 LVDS + Chrontel 7019 660 series [2:1] only: reserved (now in CR38) All other combinations reserved [3] 661 only: Pass 1:1 data [4] LVDS: 0: Panel Link expands / 1: Panel Link does not expand 30x: 0: Bridge scales / 1: Bridge does not scale = Panel scales (if possible) [5] LCD polarity select 0: VESA DMT Standard 1: EDID 2.x defined [6] LCD horizontal polarity select 0: High active 1: Low active [7] LCD vertical polarity select 0: High active 1: Low active */ /* CR37: LCDInfo */ #define LCDRGB18Bit 0x0001 #define LCDNonExpanding 0x0010 #define LCDSync 0x0020 #define LCDPass11 0x0100 /* 0: center screen, 1: Pass 1:1 data */ #define LCDDualLink 0x0200 #define DontExpandLCD LCDNonExpanding #define LCDNonExpandingShift 4 #define DontExpandLCDShift LCDNonExpandingShift #define LCDSyncBit 0x00e0 #define LCDSyncShift 6 /* CR38 (315 series) */ #define EnableDualEdge 0x01 #define SetToLCDA 0x02 /* LCD channel A (301C/302B/30x(E)LV and 650+LVDS only) */ #define EnableCHScart 0x04 /* Scart on Ch7019 (unofficial definition - TW) */ #define EnableCHYPbPr 0x08 /* YPbPr on Ch7019 (480i HDTV); only on 650/Ch7019 systems */ #define EnableSiSYPbPr 0x08 /* Enable YPbPr mode (30xLV/301C only) */ #define EnableYPbPr525i 0x00 /* Enable 525i YPbPr mode (30xLV/301C only) (mask 0x30) */ #define EnableYPbPr525p 0x10 /* Enable 525p YPbPr mode (30xLV/301C only) (mask 0x30) */ #define EnableYPbPr750p 0x20 /* Enable 750p YPbPr mode (30xLV/301C only) (mask 0x30) */ #define EnableYPbPr1080i 0x30 /* Enable 1080i YPbPr mode (30xLV/301C only) (mask 0x30) */ #define EnablePALM 0x40 /* 1 = Set PALM */ #define EnablePALN 0x80 /* 1 = Set PALN */ #define EnableNTSCJ EnablePALM /* Not BIOS */ /* CR38 (661 and later) D[7:5] 000 No VB 001 301 series VB 010 LVDS 011 Chrontel 7019 100 Conexant D2 Enable YPbPr output (see CR35) D[1:0] LCDA (like before) */ #define EnablePALMN 0x40 /* Romflag: 1 = Allow PALM/PALN */ /* CR39 (650 only) */ #define LCDPass1_1 0x01 /* 0: center screen, 1: pass 1:1 data output */ #define Enable302LV_DualLink 0x04 /* 302LV only; enable dual link */ /* CR39 (661 and later) D[1:0] YPbPr Aspect Ratio 00 4:3 letterbox 01 4:3 10 16:9 11 4:3 */ /* CR3B (651+301C) D[1:0] YPbPr Aspect Ratio ? */ /* CR79 (315/330 series only; not 661 and later) [3-0] Notify driver 0001 Mode Switch event (set by BIOS) 0010 Epansion On/Off event 0011 TV UnderScan/OverScan event 0100 Set Brightness event 0101 Set Contrast event 0110 Set Mute event 0111 Set Volume Up/Down event [4] Enable Backlight Control by BIOS/driver (set by driver; set means that the BIOS should not touch the backlight registers because eg. the driver already switched off the backlight) [5] PAL/NTSC (set by BIOS) [6] Expansion On/Off (set by BIOS; copied to CR32[4]) [7] TV UnderScan/OverScan (set by BIOS) */ /* LCDResInfo */ #define Panel300_800x600 0x01 /* CR36 */ #define Panel300_1024x768 0x02 #define Panel300_1280x1024 0x03 #define Panel300_1280x960 0x04 #define Panel300_640x480 0x05 #define Panel300_1024x600 0x06 #define Panel300_1152x768 0x07 #define Panel300_1280x768 0x0a #define Panel300_320x480 0x0e /* fstn - This is fake, can be any */ #define Panel300_Custom 0x0f #define Panel300_Barco1366 0x10 #define Panel310_800x600 0x01 #define Panel310_1024x768 0x02 #define Panel310_1280x1024 0x03 #define Panel310_640x480 0x04 #define Panel310_1024x600 0x05 #define Panel310_1152x864 0x06 #define Panel310_1280x960 0x07 #define Panel310_1152x768 0x08 /* LVDS only */ #define Panel310_1400x1050 0x09 #define Panel310_1280x768 0x0a #define Panel310_1600x1200 0x0b #define Panel310_640x480_2 0x0c #define Panel310_640x480_3 0x0d #define Panel310_320x480 0x0e /* fstn - TW: This is fake, can be any */ #define Panel310_Custom 0x0f #define Panel661_800x600 0x01 #define Panel661_1024x768 0x02 #define Panel661_1280x1024 0x03 #define Panel661_640x480 0x04 #define Panel661_1024x600 0x05 #define Panel661_1152x864 0x06 #define Panel661_1280x960 0x07 #define Panel661_1152x768 0x08 #define Panel661_1400x1050 0x09 #define Panel661_1280x768 0x0a #define Panel661_1600x1200 0x0b #define Panel661_1280x800 0x0c #define Panel661_1680x1050 0x0d #define Panel661_1280x720 0x0e #define Panel661_Custom 0x0f #define Panel_800x600 0x01 /* Unified values */ #define Panel_1024x768 0x02 /* MUST match BIOS values from 0-e */ #define Panel_1280x1024 0x03 #define Panel_640x480 0x04 #define Panel_1024x600 0x05 #define Panel_1152x864 0x06 #define Panel_1280x960 0x07 #define Panel_1152x768 0x08 /* LVDS only */ #define Panel_1400x1050 0x09 #define Panel_1280x768 0x0a /* 30xB/C and LVDS only (BIOS: all) */ #define Panel_1600x1200 0x0b #define Panel_1280x800 0x0c /* 661etc */ #define Panel_1680x1050 0x0d /* 661etc */ #define Panel_1280x720 0x0e /* 661etc */ #define Panel_Custom 0x0f /* MUST BE 0x0f (for DVI DDC detection */ #define Panel_320x480 0x10 /* SiS 550 fstn - TW: This is fake, can be any */ #define Panel_Barco1366 0x11 #define Panel_848x480 0x12 #define Panel_640x480_2 0x13 /* SiS 550 */ #define Panel_640x480_3 0x14 /* SiS 550 */ #define Panel_1280x768_2 0x15 /* 30xLV */ #define Panel_1280x768_3 0x16 /* 30xLV */ /* Index in ModeResInfo table */ #define SIS_RI_320x200 0 #define SIS_RI_320x240 1 #define SIS_RI_320x400 2 #define SIS_RI_400x300 3 #define SIS_RI_512x384 4 #define SIS_RI_640x400 5 #define SIS_RI_640x480 6 #define SIS_RI_800x600 7 #define SIS_RI_1024x768 8 #define SIS_RI_1280x1024 9 #define SIS_RI_1600x1200 10 #define SIS_RI_1920x1440 11 #define SIS_RI_2048x1536 12 #define SIS_RI_720x480 13 #define SIS_RI_720x576 14 #define SIS_RI_1280x960 15 #define SIS_RI_800x480 16 #define SIS_RI_1024x576 17 #define SIS_RI_1280x720 18 #define SIS_RI_856x480 19 #define SIS_RI_1280x768 20 #define SIS_RI_1400x1050 21 #define SIS_RI_1152x864 22 /* Up to this SiS conforming */ #define SIS_RI_848x480 23 #define SIS_RI_1360x768 24 #define SIS_RI_1024x600 25 #define SIS_RI_1152x768 26 #define SIS_RI_768x576 27 #define SIS_RI_1360x1024 28 #define SIS_RI_1680x1050 29 #define SIS_RI_1280x800 30 /* CR5F */ #define IsM650 0x80 /* Timing data */ #define NTSCHT 1716 #define NTSC2HT 1920 #define NTSCVT 525 #define PALHT 1728 #define PALVT 625 #define StHiTVHT 892 #define StHiTVVT 1126 #define StHiTextTVHT 1000 #define StHiTextTVVT 1126 #define ExtHiTVHT 2100 #define ExtHiTVVT 1125 /* Indices in (VB)VCLKData tables */ #define VCLK28 0x00 /* Index in VCLKData table (300 and 315) */ #define VCLK40 0x04 /* Index in VCLKData table (300 and 315) */ #define VCLK65_300 0x09 /* Index in VCLKData table (300) */ #define VCLK108_2_300 0x14 /* Index in VCLKData table (300) */ #define VCLK81_300 0x3f /* Index in VCLKData table (300) */ #define VCLK108_3_300 0x42 /* Index in VCLKData table (300) */ #define VCLK100_300 0x43 /* Index in VCLKData table (300) */ #define VCLK34_300 0x3d /* Index in VCLKData table (300) */ #define VCLK_CUSTOM_300 0x46 #define VCLK65_315 0x0b /* Index in (VB)VCLKData table (315) */ #define VCLK108_2_315 0x19 /* Index in (VB)VCLKData table (315) */ #define VCLK81_315 0x5b /* Index in (VB)VCLKData table (315) */ #define VCLK162_315 0x5e /* Index in (VB)VCLKData table (315) */ #define VCLK108_3_315 0x45 /* Index in VBVCLKData table (315) */ #define VCLK100_315 0x46 /* Index in VBVCLKData table (315) */ #define VCLK34_315 0x55 #define VCLK68_315 0x0d #define VCLK69_315 0x5c /* deprecated ! Index in VBVCLKData table (315) */ #define VCLK83_315 0x5c /* Index in VBVCLKData table (315) */ #define VCLK121_315 0x5d /* Index in VBVCLKData table (315) */ #define VCLK_1280x720 0x5f #define VCLK_1280x768_2 0x60 #define VCLK_1280x768_3 0x61 #define VCLK_CUSTOM_315 0x62 #define VCLK_1280x720_2 0x63 #define VCLK_720x480 0x67 #define VCLK_720x576 0x68 #define VCLK_768x576 0x68 #define VCLK_848x480 0x65 #define VCLK_856x480 0x66 #define VCLK_800x480 0x65 #define VCLK_1024x576 0x51 #define VCLK_1152x864 0x64 #define VCLK_1360x768 0x58 #define TVCLKBASE_300 0x21 /* Indices on TV clocks in VCLKData table (300) */ #define TVCLKBASE_315 0x3a /* Indices on TV clocks in (VB)VCLKData table (315) */ #define TVVCLKDIV2 0x00 /* Index relative to TVCLKBASE */ #define TVVCLK 0x01 /* Index relative to TVCLKBASE */ #define HiTVVCLKDIV2 0x02 /* Index relative to TVCLKBASE */ #define HiTVVCLK 0x03 /* Index relative to TVCLKBASE */ #define HiTVSimuVCLK 0x04 /* Index relative to TVCLKBASE */ #define HiTVTextVCLK 0x05 /* Index relative to TVCLKBASE */ #define YPbPr750pVCLK 0x25 /* Index relative to TVCLKBASE; was 0x0f NOT relative */ /* ------------------------------ */ #define SetSCARTOutput 0x01 #define HotPlugFunction 0x08 #define StStructSize 0x06 #define SIS_VIDEO_CAPTURE 0x00 - 0x30 #define SIS_VIDEO_PLAYBACK 0x02 - 0x30 #define SIS_CRT2_PORT_04 0x04 - 0x30 #define SIS_CRT2_PORT_10 0x10 - 0x30 #define SIS_CRT2_PORT_12 0x12 - 0x30 #define SIS_CRT2_PORT_14 0x14 - 0x30 #define ADR_CRT2PtrData 0x20E #define offset_Zurac 0x210 /* TW: Trumpion Zurac data pointer */ #define ADR_LVDSDesPtrData 0x212 #define ADR_LVDSCRT1DataPtr 0x214 #define ADR_CHTVVCLKPtr 0x216 #define ADR_CHTVRegDataPtr 0x218 #define LCDDataLen 8 #define HiTVDataLen 12 #define TVDataLen 16 #define LVDSDataLen 6 #define LVDSDesDataLen 3 #define ActiveNonExpanding 0x40 #define ActiveNonExpandingShift 6 #define ActivePAL 0x20 #define ActivePALShift 5 #define ModeSwitchStatus 0x0F #define SoftTVType 0x40 #define SoftSettingAddr 0x52 #define ModeSettingAddr 0x53 #define _PanelType00 0x00 #define _PanelType01 0x08 #define _PanelType02 0x10 #define _PanelType03 0x18 #define _PanelType04 0x20 #define _PanelType05 0x28 #define _PanelType06 0x30 #define _PanelType07 0x38 #define _PanelType08 0x40 #define _PanelType09 0x48 #define _PanelType0A 0x50 #define _PanelType0B 0x58 #define _PanelType0C 0x60 #define _PanelType0D 0x68 #define _PanelType0E 0x70 #define _PanelType0F 0x78 #define PRIMARY_VGA 0 /* 1: SiS is primary vga 0:SiS is secondary vga */ #define BIOSIDCodeAddr 0x235 /* Offsets to ptrs in BIOS image */ #define OEMUtilIDCodeAddr 0x237 #define VBModeIDTableAddr 0x239 #define OEMTVPtrAddr 0x241 #define PhaseTableAddr 0x243 #define NTSCFilterTableAddr 0x245 #define PALFilterTableAddr 0x247 #define OEMLCDPtr_1Addr 0x249 #define OEMLCDPtr_2Addr 0x24B #define LCDHPosTable_1Addr 0x24D #define LCDHPosTable_2Addr 0x24F #define LCDVPosTable_1Addr 0x251 #define LCDVPosTable_2Addr 0x253 #define OEMLCDPIDTableAddr 0x255 #define VBModeStructSize 5 #define PhaseTableSize 4 #define FilterTableSize 4 #define LCDHPosTableSize 7 #define LCDVPosTableSize 5 #define OEMLVDSPIDTableSize 4 #define LVDSHPosTableSize 4 #define LVDSVPosTableSize 6 #define VB_ModeID 0 #define VB_TVTableIndex 1 #define VB_LCDTableIndex 2 #define VB_LCDHIndex 3 #define VB_LCDVIndex 4 #define OEMLCDEnable 0x0001 #define OEMLCDDelayEnable 0x0002 #define OEMLCDPOSEnable 0x0004 #define OEMTVEnable 0x0100 #define OEMTVDelayEnable 0x0200 #define OEMTVFlickerEnable 0x0400 #define OEMTVPhaseEnable 0x0800 #define OEMTVFilterEnable 0x1000 #define OEMLCDPanelIDSupport 0x0080 /* ============================================================= for 315 series (old data layout) ============================================================= */ #define SoftDRAMType 0x80 #define SoftSetting_OFFSET 0x52 #define SR07_OFFSET 0x7C #define SR15_OFFSET 0x7D #define SR16_OFFSET 0x81 #define SR17_OFFSET 0x85 #define SR19_OFFSET 0x8D #define SR1F_OFFSET 0x99 #define SR21_OFFSET 0x9A #define SR22_OFFSET 0x9B #define SR23_OFFSET 0x9C #define SR24_OFFSET 0x9D #define SR25_OFFSET 0x9E #define SR31_OFFSET 0x9F #define SR32_OFFSET 0xA0 #define SR33_OFFSET 0xA1 #define CR40_OFFSET 0xA2 #define SR25_1_OFFSET 0xF6 #define CR49_OFFSET 0xF7 #define VB310Data_1_2_Offset 0xB6 #define VB310Data_4_D_Offset 0xB7 #define VB310Data_4_E_Offset 0xB8 #define VB310Data_4_10_Offset 0xBB #define RGBSenseDataOffset 0xBD #define YCSenseDataOffset 0xBF #define VideoSenseDataOffset 0xC1 #define OutputSelectOffset 0xF3 #define ECLK_MCLK_DISTANCE 0x14 #define VBIOSTablePointerStart 0x100 #define StandTablePtrOffset VBIOSTablePointerStart+0x02 #define EModeIDTablePtrOffset VBIOSTablePointerStart+0x04 #define CRT1TablePtrOffset VBIOSTablePointerStart+0x06 #define ScreenOffsetPtrOffset VBIOSTablePointerStart+0x08 #define VCLKDataPtrOffset VBIOSTablePointerStart+0x0A #define MCLKDataPtrOffset VBIOSTablePointerStart+0x0E #define CRT2PtrDataPtrOffset VBIOSTablePointerStart+0x10 #define TVAntiFlickPtrOffset VBIOSTablePointerStart+0x12 #define TVDelayPtr1Offset VBIOSTablePointerStart+0x14 #define TVPhaseIncrPtr1Offset VBIOSTablePointerStart+0x16 #define TVYFilterPtr1Offset VBIOSTablePointerStart+0x18 #define LCDDelayPtr1Offset VBIOSTablePointerStart+0x20 #define TVEdgePtr1Offset VBIOSTablePointerStart+0x24 #define CRT2Delay1Offset VBIOSTablePointerStart+0x28 #endif