/* Driver for USB Mass Storage compliant devices * * $Id: usb.c,v 1.73 2002/01/27 09:02:15 mdharm Exp $ * * Current development and maintenance by: * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * Developed with the assistance of: * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) * * Initial work by: * (c) 1999 Michael Gee (michael@linuxspecific.com) * * usb_device_id support by Adam J. Richter (adam@yggdrasil.com): * (c) 2000 Yggdrasil Computing, Inc. * * This driver is based on the 'USB Mass Storage Class' document. This * describes in detail the protocol used to communicate with such * devices. Clearly, the designers had SCSI and ATAPI commands in * mind when they created this document. The commands are all very * similar to commands in the SCSI-II and ATAPI specifications. * * It is important to note that in a number of cases this class * exhibits class-specific exemptions from the USB specification. * Notably the usage of NAK, STALL and ACK differs from the norm, in * that they are used to communicate wait, failed and OK on commands. * * Also, for certain devices, the interrupt endpoint is used to convey * status of a command. * * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more * information about this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include "usb.h" #include "scsiglue.h" #include "transport.h" #include "protocol.h" #include "debug.h" #include "initializers.h" #ifdef CONFIG_USB_STORAGE_HP8200e #include "shuttle_usbat.h" #endif #ifdef CONFIG_USB_STORAGE_SDDR09 #include "sddr09.h" #endif #ifdef CONFIG_USB_STORAGE_SDDR55 #include "sddr55.h" #endif #ifdef CONFIG_USB_STORAGE_DPCM #include "dpcm.h" #endif #ifdef CONFIG_USB_STORAGE_FREECOM #include "freecom.h" #endif #ifdef CONFIG_USB_STORAGE_ISD200 #include "isd200.h" #endif #ifdef CONFIG_USB_STORAGE_DATAFAB #include "datafab.h" #endif #ifdef CONFIG_USB_STORAGE_JUMPSHOT #include "jumpshot.h" #endif #include #include #include #include #include /* Some informational data */ MODULE_AUTHOR("Matthew Dharm "); MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); MODULE_LICENSE("GPL"); /* * Per device data */ static int my_host_number; /* * kernel thread actions */ #define US_ACT_COMMAND 1 #define US_ACT_DEVICE_RESET 2 #define US_ACT_BUS_RESET 3 #define US_ACT_HOST_RESET 4 #define US_ACT_EXIT 5 /* The list of structures and the protective lock for them */ struct us_data *us_list; struct semaphore us_list_semaphore; static void * storage_probe(struct usb_device *dev, unsigned int ifnum, const struct usb_device_id *id); static void storage_disconnect(struct usb_device *dev, void *ptr); /* The entries in this table, except for final ones here * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, * line for line with the entries of us_unsuaul_dev_list[]. * For now, we duplicate idVendor and idProduct in us_unsual_dev_list, * just to avoid alignment bugs. */ #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ vendorName, productName,useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) } static struct usb_device_id storage_usb_ids [] = { # include "unusual_devs.h" #undef UNUSUAL_DEV /* Control/Bulk transport for all SubClass values */ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) }, /* Control/Bulk/Interrupt transport for all SubClass values */ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) }, /* Bulk-only transport for all SubClass values */ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) }, /* Terminating entry */ { } }; MODULE_DEVICE_TABLE (usb, storage_usb_ids); /* This is the list of devices we recognize, along with their flag data */ /* The vendor name should be kept at eight characters or less, and * the product name should be kept at 16 characters or less. If a device * has the US_FL_FIX_INQUIRY flag, then the vendor and product names * normally generated by a device thorugh the INQUIRY response will be * taken from this list, and this is the reason for the above size * restriction. However, if the flag is not present, then you * are free to use as many characters as you like. */ #undef UNUSUAL_DEV #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ vendor_name, product_name, use_protocol, use_transport, \ init_function, Flags) \ { \ vendorName: vendor_name, \ productName: product_name, \ useProtocol: use_protocol, \ useTransport: use_transport, \ initFunction : init_function, \ flags: Flags, \ } static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" # undef UNUSUAL_DEV /* Control/Bulk transport for all SubClass values */ { useProtocol: US_SC_RBC, useTransport: US_PR_CB}, { useProtocol: US_SC_8020, useTransport: US_PR_CB}, { useProtocol: US_SC_QIC, useTransport: US_PR_CB}, { useProtocol: US_SC_UFI, useTransport: US_PR_CB}, { useProtocol: US_SC_8070, useTransport: US_PR_CB}, { useProtocol: US_SC_SCSI, useTransport: US_PR_CB}, /* Control/Bulk/Interrupt transport for all SubClass values */ { useProtocol: US_SC_RBC, useTransport: US_PR_CBI}, { useProtocol: US_SC_8020, useTransport: US_PR_CBI}, { useProtocol: US_SC_QIC, useTransport: US_PR_CBI}, { useProtocol: US_SC_UFI, useTransport: US_PR_CBI}, { useProtocol: US_SC_8070, useTransport: US_PR_CBI}, { useProtocol: US_SC_SCSI, useTransport: US_PR_CBI}, /* Bulk-only transport for all SubClass values */ { useProtocol: US_SC_RBC, useTransport: US_PR_BULK}, { useProtocol: US_SC_8020, useTransport: US_PR_BULK}, { useProtocol: US_SC_QIC, useTransport: US_PR_BULK}, { useProtocol: US_SC_UFI, useTransport: US_PR_BULK}, { useProtocol: US_SC_8070, useTransport: US_PR_BULK}, { useProtocol: US_SC_SCSI, useTransport: US_PR_BULK}, /* Terminating entry */ { 0 } }; struct usb_driver usb_storage_driver = { name: "usb-storage", probe: storage_probe, disconnect: storage_disconnect, id_table: storage_usb_ids, }; /* * fill_inquiry_response takes an unsigned char array (which must * be at least 36 characters) and populates the vendor name, * product name, and revision fields. Then the array is copied * into the SCSI command's response buffer (oddly enough * called request_buffer). data_len contains the length of the * data array, which again must be at least 36. */ void fill_inquiry_response(struct us_data *us, unsigned char *data, unsigned int data_len) { int i; struct scatterlist *sg; int len = us->srb->request_bufflen > data_len ? data_len : us->srb->request_bufflen; int transferred; int amt; if (data_len<36) // You lose. return; if(data[0]&0x20) { /* USB device currently not connected. Return peripheral qualifier 001b ("...however, the physical device is not currently connected to this logical unit") and leave vendor and product identification empty. ("If the target does store some of the INQUIRY data on the device, it may return zeros or ASCII spaces (20h) in those fields until the data is available from the device."). */ memset(data+8,0,28); } else { memcpy(data+8, us->unusual_dev->vendorName, strlen(us->unusual_dev->vendorName) > 8 ? 8 : strlen(us->unusual_dev->vendorName)); memcpy(data+16, us->unusual_dev->productName, strlen(us->unusual_dev->productName) > 16 ? 16 : strlen(us->unusual_dev->productName)); data[32] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>12) & 0x0F); data[33] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>8) & 0x0F); data[34] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>4) & 0x0F); data[35] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice) & 0x0F); } if (us->srb->use_sg) { sg = (struct scatterlist *)us->srb->request_buffer; for (i=0; isrb->use_sg; i++) memset(sg[i].address, 0, sg[i].length); for (i=0, transferred=0; isrb->use_sg && transferred < len; i++) { amt = sg[i].length > len-transferred ? len-transferred : sg[i].length; memcpy(sg[i].address, data+transferred, amt); transferred -= amt; } } else { memset(us->srb->request_buffer, 0, us->srb->request_bufflen); memcpy(us->srb->request_buffer, data, len); } } static int usb_stor_control_thread(void * __us) { struct us_data *us = (struct us_data *)__us; int action; lock_kernel(); /* * This thread doesn't need any user-level access, * so get rid of all our resources.. */ exit_files(current); current->files = init_task.files; atomic_inc(¤t->files->count); daemonize(); reparent_to_init(); /* avoid getting signals */ spin_lock_irq(¤t->sigmask_lock); flush_signals(current); sigfillset(¤t->blocked); recalc_sigpending(current); spin_unlock_irq(¤t->sigmask_lock); /* set our name for identification purposes */ sprintf(current->comm, "usb-storage-%d", us->host_number); current->flags |= PF_MEMALLOC; unlock_kernel(); /* set up for wakeups by new commands */ init_MUTEX_LOCKED(&us->sema); /* signal that we've started the thread */ complete(&(us->notify)); set_current_state(TASK_INTERRUPTIBLE); for(;;) { unsigned long flags; US_DEBUGP("*** thread sleeping.\n"); if(down_interruptible(&us->sema)) break; US_DEBUGP("*** thread awakened.\n"); /* lock access to the queue element */ spin_lock_irqsave(&(us->queue_exclusion), flags); /* take the command off the queue */ action = us->action; us->action = 0; us->srb = us->queue_srb; /* release the queue lock as fast as possible */ spin_unlock_irqrestore(&(us->queue_exclusion), flags); switch (action) { case US_ACT_COMMAND: /* reject the command if the direction indicator * is UNKNOWN */ if (us->srb->sc_data_direction == SCSI_DATA_UNKNOWN) { US_DEBUGP("UNKNOWN data direction\n"); us->srb->result = DID_ERROR << 16; set_current_state(TASK_INTERRUPTIBLE); us->srb->scsi_done(us->srb); us->srb = NULL; break; } /* reject if target != 0 or if LUN is higher than * the maximum known LUN */ if (us->srb->target && !(us->flags & US_FL_SCM_MULT_TARG)) { US_DEBUGP("Bad target number (%d/%d)\n", us->srb->target, us->srb->lun); us->srb->result = DID_BAD_TARGET << 16; set_current_state(TASK_INTERRUPTIBLE); us->srb->scsi_done(us->srb); us->srb = NULL; break; } if (us->srb->lun > us->max_lun) { US_DEBUGP("Bad LUN (%d/%d)\n", us->srb->target, us->srb->lun); us->srb->result = DID_BAD_TARGET << 16; set_current_state(TASK_INTERRUPTIBLE); us->srb->scsi_done(us->srb); us->srb = NULL; break; } /* lock the device pointers */ down(&(us->dev_semaphore)); /* our device has gone - pretend not ready */ if (!us->pusb_dev) { US_DEBUGP("Request is for removed device\n"); /* For REQUEST_SENSE, it's the data. But * for anything else, it should look like * we auto-sensed for it. */ if (us->srb->cmnd[0] == REQUEST_SENSE) { memcpy(us->srb->request_buffer, usb_stor_sense_notready, sizeof(usb_stor_sense_notready)); us->srb->result = GOOD << 1; } else if(us->srb->cmnd[0] == INQUIRY) { unsigned char data_ptr[36] = { 0x20, 0x80, 0x02, 0x02, 0x1F, 0x00, 0x00, 0x00}; US_DEBUGP("Faking INQUIRY command for disconnected device\n"); fill_inquiry_response(us, data_ptr, 36); us->srb->result = GOOD << 1; } else { memcpy(us->srb->sense_buffer, usb_stor_sense_notready, sizeof(usb_stor_sense_notready)); us->srb->result = CHECK_CONDITION << 1; } } else { /* !us->pusb_dev */ /* Handle those devices which need us to fake * their inquiry data */ if ((us->srb->cmnd[0] == INQUIRY) && (us->flags & US_FL_FIX_INQUIRY)) { unsigned char data_ptr[36] = { 0x00, 0x80, 0x02, 0x02, 0x1F, 0x00, 0x00, 0x00}; US_DEBUGP("Faking INQUIRY command\n"); fill_inquiry_response(us, data_ptr, 36); us->srb->result = GOOD << 1; } else { /* we've got a command, let's do it! */ US_DEBUG(usb_stor_show_command(us->srb)); us->proto_handler(us->srb, us); } } /* unlock the device pointers */ up(&(us->dev_semaphore)); /* indicate that the command is done */ if (us->srb->result != DID_ABORT << 16) { US_DEBUGP("scsi cmd done, result=0x%x\n", us->srb->result); set_current_state(TASK_INTERRUPTIBLE); us->srb->scsi_done(us->srb); }; if (atomic_read(&us->abortcnt) != 0) { US_DEBUGP("scsi command aborted\n"); set_current_state(TASK_INTERRUPTIBLE); complete(&(us->notify)); } us->srb = NULL; break; case US_ACT_DEVICE_RESET: break; case US_ACT_BUS_RESET: break; case US_ACT_HOST_RESET: break; } /* end switch on action */ /* exit if we get a signal to exit */ if (action == US_ACT_EXIT) { US_DEBUGP("-- US_ACT_EXIT command received\n"); break; } } /* for (;;) */ /* clean up after ourselves */ set_current_state(TASK_INTERRUPTIBLE); /* notify the exit routine that we're actually exiting now */ complete(&(us->notify)); return 0; } /* Set up the IRQ pipe and handler * Note that this function assumes that all the data in the us_data * strucuture is current. This includes the ep_int field, which gives us * the endpoint for the interrupt. * Returns non-zero on failure, zero on success * * ss->dev_semaphore is expected taken, except for a newly minted, * unregistered device. */ static int usb_stor_allocate_irq(struct us_data *ss) { unsigned int pipe; int maxp; int result; US_DEBUGP("Allocating IRQ for CBI transport\n"); /* allocate the URB */ ss->irq_urb = usb_alloc_urb(0); if (!ss->irq_urb) { US_DEBUGP("couldn't allocate interrupt URB"); return 1; } /* calculate the pipe and max packet size */ pipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); maxp = usb_maxpacket(ss->pusb_dev, pipe, usb_pipeout(pipe)); if (maxp > sizeof(ss->irqbuf)) maxp = sizeof(ss->irqbuf); /* fill in the URB with our data */ FILL_INT_URB(ss->irq_urb, ss->pusb_dev, pipe, ss->irqbuf, maxp, usb_stor_CBI_irq, ss, ss->ep_int->bInterval); /* submit the URB for processing */ result = usb_submit_urb(ss->irq_urb); US_DEBUGP("usb_submit_urb() returns %d\n", result); if (result) { usb_free_urb(ss->irq_urb); return 2; } return 0; } /* Probe to see if a new device is actually a SCSI device */ static void * storage_probe(struct usb_device *dev, unsigned int ifnum, const struct usb_device_id *id) { int i; const int id_index = id - storage_usb_ids; char mf[USB_STOR_STRING_LEN]; /* manufacturer */ char prod[USB_STOR_STRING_LEN]; /* product */ char serial[USB_STOR_STRING_LEN]; /* serial number */ GUID(guid); /* Global Unique Identifier */ unsigned int flags; struct us_unusual_dev *unusual_dev; struct us_data *ss = NULL; #ifdef CONFIG_USB_STORAGE_SDDR09 int result; #endif /* these are temporary copies -- we test on these, then put them * in the us-data structure */ struct usb_endpoint_descriptor *ep_in = NULL; struct usb_endpoint_descriptor *ep_out = NULL; struct usb_endpoint_descriptor *ep_int = NULL; u8 subclass = 0; u8 protocol = 0; /* the altsettting on the interface we're probing that matched our * usb_match_id table */ struct usb_interface *intf = dev->actconfig->interface; struct usb_interface_descriptor *altsetting = intf[ifnum].altsetting + intf[ifnum].act_altsetting; US_DEBUGP("act_altsettting is %d\n", intf[ifnum].act_altsetting); /* clear the temporary strings */ memset(mf, 0, sizeof(mf)); memset(prod, 0, sizeof(prod)); memset(serial, 0, sizeof(serial)); /* * Can we support this device, either because we know about it * from our unusual device list, or because it advertises that it's * compliant to the specification? * * id_index is calculated in the declaration to be the index number * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ US_DEBUGP("id_index calculated to be: %d\n", id_index); US_DEBUGP("Array length appears to be: %d\n", sizeof(us_unusual_dev_list) / sizeof(us_unusual_dev_list[0])); if (id_index < sizeof(us_unusual_dev_list) / sizeof(us_unusual_dev_list[0])) { unusual_dev = &us_unusual_dev_list[id_index]; if (unusual_dev->vendorName) US_DEBUGP("Vendor: %s\n", unusual_dev->vendorName); if (unusual_dev->productName) US_DEBUGP("Product: %s\n", unusual_dev->productName); } else /* no, we can't support it */ return NULL; /* At this point, we know we've got a live one */ US_DEBUGP("USB Mass Storage device detected\n"); /* we wait one second for the device to settle */ ssleep(1); /* Determine subclass and protocol, or copy from the interface */ subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ? altsetting->bInterfaceSubClass : unusual_dev->useProtocol; protocol = (unusual_dev->useTransport == US_PR_DEVICE) ? altsetting->bInterfaceProtocol : unusual_dev->useTransport; flags = unusual_dev->flags; /* * Find the endpoints we need * We are expecting a minimum of 2 endpoints - in and out (bulk). * An optional interrupt is OK (necessary for CBI protocol). * We will ignore any others. */ for (i = 0; i < altsetting->bNumEndpoints; i++) { /* is it an BULK endpoint? */ if ((altsetting->endpoint[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { /* BULK in or out? */ if (altsetting->endpoint[i].bEndpointAddress & USB_DIR_IN) ep_in = &altsetting->endpoint[i]; else ep_out = &altsetting->endpoint[i]; } /* is it an interrupt endpoint? */ if ((altsetting->endpoint[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { ep_int = &altsetting->endpoint[i]; } } US_DEBUGP("Endpoints: In: 0x%p Out: 0x%p Int: 0x%p (Period %d)\n", ep_in, ep_out, ep_int, ep_int ? ep_int->bInterval : 0); #ifdef CONFIG_USB_STORAGE_SDDR09 if (protocol == US_PR_EUSB_SDDR09 || protocol == US_PR_DPCM_USB) { /* set the configuration -- STALL is an acceptable response here */ result = usb_set_configuration(dev, 1); US_DEBUGP("Result from usb_set_configuration is %d\n", result); if (result == -EPIPE) { US_DEBUGP("-- clearing stall on control interface\n"); usb_clear_halt(dev, usb_sndctrlpipe(dev, 0)); } else if (result != 0) { /* it's not a stall, but another error -- time to bail */ US_DEBUGP("-- Unknown error. Rejecting device\n"); return NULL; } } #endif /* Do some basic sanity checks, and bail if we find a problem */ if (!ep_in || !ep_out || (protocol == US_PR_CBI && !ep_int)) { US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n"); return NULL; } /* At this point, we're committed to using the device */ usb_inc_dev_use(dev); /* clear the GUID and fetch the strings */ GUID_CLEAR(guid); if (dev->descriptor.iManufacturer) usb_string(dev, dev->descriptor.iManufacturer, mf, sizeof(mf)); if (dev->descriptor.iProduct) usb_string(dev, dev->descriptor.iProduct, prod, sizeof(prod)); if (dev->descriptor.iSerialNumber && !(flags & US_FL_IGNORE_SER)) usb_string(dev, dev->descriptor.iSerialNumber, serial, sizeof(serial)); /* Create a GUID for this device */ if (dev->descriptor.iSerialNumber && serial[0]) { /* If we have a serial number, and it's a non-NULL string */ make_guid(guid, dev->descriptor.idVendor, dev->descriptor.idProduct, serial); } else { /* We don't have a serial number, so we use 0 */ make_guid(guid, dev->descriptor.idVendor, dev->descriptor.idProduct, "0"); } /* * Now check if we have seen this GUID before * We're looking for a device with a matching GUID that isn't * already on the system */ ss = us_list; while ((ss != NULL) && ((ss->pusb_dev) || !GUID_EQUAL(guid, ss->guid))) ss = ss->next; if (ss != NULL) { /* Existing device -- re-connect */ US_DEBUGP("Found existing GUID " GUID_FORMAT "\n", GUID_ARGS(guid)); /* lock the device pointers */ down(&(ss->dev_semaphore)); /* establish the connection to the new device upon reconnect */ ss->ifnum = ifnum; ss->pusb_dev = dev; /* copy over the endpoint data */ if (ep_in) ss->ep_in = ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if (ep_out) ss->ep_out = ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; ss->ep_int = ep_int; /* allocate an IRQ callback if one is needed */ if ((ss->protocol == US_PR_CBI) && usb_stor_allocate_irq(ss)) { up(&(ss->dev_semaphore)); usb_dec_dev_use(dev); return NULL; } /* allocate the URB we're going to use */ ss->current_urb = usb_alloc_urb(0); if (!ss->current_urb) { up(&(ss->dev_semaphore)); usb_dec_dev_use(dev); return NULL; } /* Re-Initialize the device if it needs it */ if (unusual_dev && unusual_dev->initFunction) (unusual_dev->initFunction)(ss); /* unlock the device pointers */ up(&(ss->dev_semaphore)); /* Try to re-connect ourselves to the SCSI subsystem */ if (scsi_add_single_device(ss->host, 0, 0, 0)) printk(KERN_WARNING "Unable to connect USB device to the SCSI subsystem\n"); else printk(KERN_WARNING "USB device connected to the SCSI subsystem\n"); } else { /* New device -- allocate memory and initialize */ US_DEBUGP("New GUID " GUID_FORMAT "\n", GUID_ARGS(guid)); if ((ss = (struct us_data *)kmalloc(sizeof(struct us_data), GFP_KERNEL)) == NULL) { printk(KERN_WARNING USB_STORAGE "Out of memory\n"); usb_dec_dev_use(dev); return NULL; } memset(ss, 0, sizeof(struct us_data)); /* allocate the URB we're going to use */ ss->current_urb = usb_alloc_urb(0); if (!ss->current_urb) { kfree(ss); usb_dec_dev_use(dev); return NULL; } /* Initialize the mutexes only when the struct is new */ init_completion(&(ss->notify)); init_MUTEX_LOCKED(&(ss->ip_waitq)); spin_lock_init(&(ss->queue_exclusion)); init_MUTEX(&(ss->current_urb_sem)); init_MUTEX(&(ss->dev_semaphore)); /* copy over the subclass and protocol data */ ss->subclass = subclass; ss->protocol = protocol; ss->flags = flags; ss->unusual_dev = unusual_dev; /* copy over the endpoint data */ if (ep_in) ss->ep_in = ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if (ep_out) ss->ep_out = ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; ss->ep_int = ep_int; /* establish the connection to the new device */ ss->ifnum = ifnum; ss->pusb_dev = dev; /* copy over the identifiying strings */ strncpy(ss->vendor, mf, USB_STOR_STRING_LEN); strncpy(ss->product, prod, USB_STOR_STRING_LEN); strncpy(ss->serial, serial, USB_STOR_STRING_LEN); if (strlen(ss->vendor) == 0) { if (unusual_dev->vendorName) strncpy(ss->vendor, unusual_dev->vendorName, USB_STOR_STRING_LEN); else strncpy(ss->vendor, "Unknown", USB_STOR_STRING_LEN); } if (strlen(ss->product) == 0) { if (unusual_dev->productName) strncpy(ss->product, unusual_dev->productName, USB_STOR_STRING_LEN); else strncpy(ss->product, "Unknown", USB_STOR_STRING_LEN); } if (strlen(ss->serial) == 0) strncpy(ss->serial, "None", USB_STOR_STRING_LEN); /* copy the GUID we created before */ memcpy(ss->guid, guid, sizeof(guid)); /* * Set the handler pointers based on the protocol * Again, this data is persistant across reattachments */ switch (ss->protocol) { case US_PR_CB: ss->transport_name = "Control/Bulk"; ss->transport = usb_stor_CB_transport; ss->transport_reset = usb_stor_CB_reset; ss->max_lun = 7; break; case US_PR_CBI: ss->transport_name = "Control/Bulk/Interrupt"; ss->transport = usb_stor_CBI_transport; ss->transport_reset = usb_stor_CB_reset; ss->max_lun = 7; break; case US_PR_BULK: ss->transport_name = "Bulk"; ss->transport = usb_stor_Bulk_transport; ss->transport_reset = usb_stor_Bulk_reset; ss->max_lun = usb_stor_Bulk_max_lun(ss); break; #ifdef CONFIG_USB_STORAGE_HP8200e case US_PR_SCM_ATAPI: ss->transport_name = "SCM/ATAPI"; ss->transport = hp8200e_transport; ss->transport_reset = usb_stor_CB_reset; ss->max_lun = 1; break; #endif #ifdef CONFIG_USB_STORAGE_SDDR09 case US_PR_EUSB_SDDR09: ss->transport_name = "EUSB/SDDR09"; ss->transport = sddr09_transport; ss->transport_reset = usb_stor_CB_reset; ss->max_lun = 0; break; #endif #ifdef CONFIG_USB_STORAGE_SDDR55 case US_PR_SDDR55: ss->transport_name = "SDDR55"; ss->transport = sddr55_transport; ss->transport_reset = sddr55_reset; ss->max_lun = 0; break; #endif #ifdef CONFIG_USB_STORAGE_DPCM case US_PR_DPCM_USB: ss->transport_name = "Control/Bulk-EUSB/SDDR09"; ss->transport = dpcm_transport; ss->transport_reset = usb_stor_CB_reset; ss->max_lun = 1; break; #endif #ifdef CONFIG_USB_STORAGE_FREECOM case US_PR_FREECOM: ss->transport_name = "Freecom"; ss->transport = freecom_transport; ss->transport_reset = usb_stor_freecom_reset; ss->max_lun = 0; break; #endif #ifdef CONFIG_USB_STORAGE_DATAFAB case US_PR_DATAFAB: ss->transport_name = "Datafab Bulk-Only"; ss->transport = datafab_transport; ss->transport_reset = usb_stor_Bulk_reset; ss->max_lun = 1; break; #endif #ifdef CONFIG_USB_STORAGE_JUMPSHOT case US_PR_JUMPSHOT: ss->transport_name = "Lexar Jumpshot Control/Bulk"; ss->transport = jumpshot_transport; ss->transport_reset = usb_stor_Bulk_reset; ss->max_lun = 1; break; #endif default: ss->transport_name = "Unknown"; kfree(ss->current_urb); kfree(ss); usb_dec_dev_use(dev); return NULL; break; } US_DEBUGP("Transport: %s\n", ss->transport_name); /* fix for single-lun devices */ if (ss->flags & US_FL_SINGLE_LUN) ss->max_lun = 0; switch (ss->subclass) { case US_SC_RBC: ss->protocol_name = "Reduced Block Commands (RBC)"; ss->proto_handler = usb_stor_transparent_scsi_command; break; case US_SC_8020: ss->protocol_name = "8020i"; ss->proto_handler = usb_stor_ATAPI_command; ss->max_lun = 0; break; case US_SC_QIC: ss->protocol_name = "QIC-157"; ss->proto_handler = usb_stor_qic157_command; ss->max_lun = 0; break; case US_SC_8070: ss->protocol_name = "8070i"; ss->proto_handler = usb_stor_ATAPI_command; ss->max_lun = 0; break; case US_SC_SCSI: ss->protocol_name = "Transparent SCSI"; ss->proto_handler = usb_stor_transparent_scsi_command; break; case US_SC_UFI: ss->protocol_name = "Uniform Floppy Interface (UFI)"; ss->proto_handler = usb_stor_ufi_command; break; #ifdef CONFIG_USB_STORAGE_ISD200 case US_SC_ISD200: ss->protocol_name = "ISD200 ATA/ATAPI"; ss->proto_handler = isd200_ata_command; break; #endif default: ss->protocol_name = "Unknown"; kfree(ss->current_urb); kfree(ss); usb_dec_dev_use(dev); return NULL; break; } US_DEBUGP("Protocol: %s\n", ss->protocol_name); /* allocate an IRQ callback if one is needed */ if ((ss->protocol == US_PR_CBI) && usb_stor_allocate_irq(ss)) { kfree(ss->current_urb); kfree(ss); usb_dec_dev_use(dev); return NULL; } /* * Since this is a new device, we need to generate a scsi * host definition, and register with the higher SCSI layers */ /* Initialize the host template based on the default one */ memcpy(&(ss->htmplt), &usb_stor_host_template, sizeof(usb_stor_host_template)); /* Grab the next host number */ ss->host_number = my_host_number++; /* We abuse this pointer so we can pass the ss pointer to * the host controller thread in us_detect. But how else are * we to do it? */ ss->htmplt.proc_dir = (void *)ss; /* According to the technical support people at Genesys Logic, * devices using their chips have problems transferring more * than 32 KB at a time. In practice people have found that * 64 KB works okay and that's what Windows does. But we'll * be conservative. */ if (ss->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS) ss->htmplt.max_sectors = 64; /* Just before we start our control thread, initialize * the device if it needs initialization */ if (unusual_dev && unusual_dev->initFunction) unusual_dev->initFunction(ss); /* start up our control thread */ ss->pid = kernel_thread(usb_stor_control_thread, ss, CLONE_VM); if (ss->pid < 0) { printk(KERN_WARNING USB_STORAGE "Unable to start control thread\n"); kfree(ss->current_urb); kfree(ss); usb_dec_dev_use(dev); return NULL; } /* wait for the thread to start */ wait_for_completion(&(ss->notify)); /* now register - our detect function will be called */ ss->htmplt.module = THIS_MODULE; scsi_register_module(MODULE_SCSI_HA, &(ss->htmplt)); /* lock access to the data structures */ down(&us_list_semaphore); /* put us in the list */ ss->next = us_list; us_list = ss; /* release the data structure lock */ up(&us_list_semaphore); } printk(KERN_DEBUG "WARNING: USB Mass Storage data integrity not assured\n"); printk(KERN_DEBUG "USB Mass Storage device found at %d\n", dev->devnum); /* return a pointer for the disconnect function */ return ss; } /* Handle a disconnect event from the USB core */ static void storage_disconnect(struct usb_device *dev, void *ptr) { struct us_data *ss = ptr; int result; US_DEBUGP("storage_disconnect() called\n"); /* this is the odd case -- we disconnected but weren't using it */ if (!ss) { US_DEBUGP("-- device was not in use\n"); return; } /* lock access to the device data structure */ down(&(ss->dev_semaphore)); /* Try to un-hook ourselves from the SCSI subsystem */ if (scsi_remove_single_device(ss->host, 0, 0, 0)) printk(KERN_WARNING "Unable to disconnect USB device from the SCSI subsystem\n"); else printk(KERN_WARNING "USB device disconnected from the SCSI subsystem\n"); /* release the IRQ, if we have one */ if (ss->irq_urb) { US_DEBUGP("-- releasing irq URB\n"); result = usb_unlink_urb(ss->irq_urb); US_DEBUGP("-- usb_unlink_urb() returned %d\n", result); usb_free_urb(ss->irq_urb); ss->irq_urb = NULL; } /* free up the main URB for this device */ US_DEBUGP("-- releasing main URB\n"); result = usb_unlink_urb(ss->current_urb); US_DEBUGP("-- usb_unlink_urb() returned %d\n", result); usb_free_urb(ss->current_urb); ss->current_urb = NULL; /* mark the device as gone */ usb_dec_dev_use(ss->pusb_dev); ss->pusb_dev = NULL; /* unlock access to the device data structure */ up(&(ss->dev_semaphore)); } /*********************************************************************** * Initialization and registration ***********************************************************************/ int __init usb_stor_init(void) { printk(KERN_INFO "Initializing USB Mass Storage driver...\n"); /* initialize internal global data elements */ us_list = NULL; init_MUTEX(&us_list_semaphore); my_host_number = 0; /* register the driver, return -1 if error */ if (usb_register(&usb_storage_driver) < 0) return -1; /* we're all set */ printk(KERN_INFO "USB Mass Storage support registered.\n"); return 0; } void __exit usb_stor_exit(void) { struct us_data *next; US_DEBUGP("usb_stor_exit() called\n"); /* Deregister the driver * This eliminates races with probes and disconnects */ US_DEBUGP("-- calling usb_deregister()\n"); usb_deregister(&usb_storage_driver) ; /* While there are still virtual hosts, unregister them * Note that it's important to do this completely before removing * the structures because of possible races with the /proc * interface */ for (next = us_list; next; next = next->next) { US_DEBUGP("-- calling scsi_unregister_module()\n"); scsi_unregister_module(MODULE_SCSI_HA, &(next->htmplt)); } /* While there are still structures, free them. Note that we are * now race-free, since these structures can no longer be accessed * from either the SCSI command layer or the /proc interface */ while (us_list) { /* keep track of where the next one is */ next = us_list->next; /* If there's extra data in the us_data structure then * free that first */ if (us_list->extra) { /* call the destructor routine, if it exists */ if (us_list->extra_destructor) { US_DEBUGP("-- calling extra_destructor()\n"); us_list->extra_destructor(us_list->extra); } /* destroy the extra data */ US_DEBUGP("-- freeing the data structure\n"); kfree(us_list->extra); } /* free the structure itself */ kfree (us_list); /* advance the list pointer */ us_list = next; } } module_init(usb_stor_init); module_exit(usb_stor_exit);