/* Driver for USB Mass Storage compliant devices * Ununsual Devices File * * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $ * * Current development and maintenance by: * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * Initial work by: * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. * * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more * information about this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* IMPORTANT NOTE: This file must be included in another file which does * the following thing for it to work: * The macro UNUSUAL_DEV() must be defined before this file is included */ #include /* If you edit this file, please try to keep it sorted first by VendorID, * then by ProductID. * * If you want to add an entry for this file, please send the following * to greg@kroah.com: * - patch that adds the entry for your device which includes your * email address right above the entry. * - a copy of /proc/bus/usb/devices with your device plugged in * running with this patch. * */ UNUSUAL_DEV( 0x03ee, 0x0000, 0x0000, 0x0245, "Mitsumi", "CD-R/RW Drive", US_SC_8020, US_PR_CBI, NULL, 0), UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200, "Mitsumi", "USB FDD", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, "HP", "CD-Writer+", US_SC_8070, US_PR_CB, NULL, 0), #ifdef CONFIG_USB_STORAGE_HP8200e UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, "HP", "CD-Writer+ 8200e", US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0), UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, "HP", "CD-Writer+ CD-4e", US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0), #endif /* Reported by Gilles Espinasse */ UNUSUAL_DEV( 0x03f0, 0x2001, 0x0001, 0x9999, "HP", "USB FDC GOLD-1.11", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Reported by Sebastian Kapfer * and Olaf Hering (different bcd's, same vendor/product) * for USB floppies that need the SINGLE_LUN enforcement. */ UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, "NEC", "NEC USB UF000x", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Deduced by Jonathan Woithe * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * always fails and confuses drive. */ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, "Buffalo", "DUB-P40G HDD", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", "FDC GOLD-2.30", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), #ifdef CONFIG_USB_STORAGE_DPCM UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, "Microtech", "CameraMate (DPCM_USB)", US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), #endif /* Patch submitted by Philipp Friedrich */ UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, "Kyocera", "Finecam S3x", US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), /* Patch submitted by Philipp Friedrich */ UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, "Kyocera", "Finecam S4", US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), /* Patch submitted by Stephane Galles */ UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, "Kyocera", "Finecam S5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Reported by Paul Stewart * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, "Hitachi", "DVD-CAM DZ-MV100A Camcorder", US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN), /* Reported by Andreas Bockhold */ UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100, "NIKON", "NIKON DSC D70", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported by Jamie Kitson */ UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100, "NIKON", "NIKON DSC D70s", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported by Simon Levitt * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, "Epson", "875DC Storage", US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY), /* Reported by Khalid Aziz * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, "Epson", "785EPX Storage", US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN), /* Not sure who reported this originally but * Pavel Machek reported that the extra US_FL_SINGLE_LUN * flag be added */ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, "Fujifilm", "FinePix 1400Zoom", US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), /* Reported by Peter Wächtler * The device needs the flags only. */ UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074, "ScanLogic", "SL11R-IDE", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Reported by Kriston Fincher * Patch submitted by Sean Millichamp * This is to support the Panasonic PalmCam PV-SD4090 * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, "Panasonic", "LS-120 Camera", US_SC_UFI, US_PR_CBI, NULL, 0), /* From Yukihiro Nakai, via zaitcev@yahoo.com. * This is needed for CB instead of CBI */ UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, "Sharp CE-CW05", "CD-R/RW Drive", US_SC_8070, US_PR_CB, NULL, 0), /* Reported by Adriaan Penning * Note that these cameras report "Medium not present" after * ALLOW_MEDIUM_REMOVAL, so they also need to be marked * NOT_LOCKABLE in the SCSI blacklist (and the vendor is MATSHITA). */ UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, "Panasonic", "DMC-LCx Camera", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Most of the following entries were developed with the help of * Shuttle/SCM directly. */ UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, "Matshita", "LS-120", US_SC_8020, US_PR_CB, NULL, 0), UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, "Shuttle", "eUSCSI Bridge", US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), #ifdef CONFIG_USB_STORAGE_SDDR09 UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, "Sandisk", "ImageMate SDDR09", US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, US_FL_SINGLE_LUN ), /* This entry is from Andries.Brouwer@cwi.nl */ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, "SCM Microsystems", "eUSB SmartMedia / CompactFlash Adapter", US_SC_SCSI, US_PR_DPCM_USB, sddr09_init, 0), #endif UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0205, "Shuttle", "eUSB MMC Adapter", US_SC_SCSI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN), UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, "Sony", "Hifd", US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN), UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, "Shuttle", "eUSB ATA/ATAPI Adapter", US_SC_8020, US_PR_CB, NULL, 0), UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, "Shuttle", "eUSB CompactFlash Adapter", US_SC_8020, US_PR_CB, NULL, 0), UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, "Shuttle", "eUSCSI Bridge", US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, "Shuttle", "eUSCSI Bridge", US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, "Shuttle", "CD-RW Device", US_SC_8020, US_PR_CB, NULL, 0), /* Reported by Bob Sass -- only rev 1.33 tested */ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, "Belkin", "USB SCSI Adaptor", US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), /* Iomega Clik! Drive * Reported by David Chatenay * The reason this is needed is not fully known. */ UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, "Iomega", "USB Clik! 40", US_SC_8070, US_PR_BULK, NULL, US_FL_FIX_INQUIRY ), /* This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, "Sony", "DSC-S30/S70/S75/505V/F505/F707/F717/P8", US_SC_SCSI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN | US_FL_MODE_XLATE ), /* Submitted by Lars Jacob * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, "Sony", "DSC-T1/T5/H5", US_SC_8070, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Reported by wim@geeks.nl */ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, "Sony", "Memorystick NW-MS7", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, "Sony", "Portable USB Harddrive V2", US_SC_ISD200, US_PR_BULK, isd200_Initialization, 0 ), #endif UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, "Sony", "Memorystick MSAC-US1", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Klaus Mueller */ UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, "Sony", "Handycam", US_SC_SCSI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN | US_FL_MODE_XLATE), /* Submitted by Klaus Mueller */ UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, "Sony", "Handycam", US_SC_SCSI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Rajesh Kumble Nayak */ UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, "Sony", "Handycam HC-85", US_SC_UFI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN | US_FL_MODE_XLATE), UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, "Sony", "Memorystick MSC-U01N", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Michal Mlotek */ UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, "Sony", "PEG N760c Memorystick", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, "Sony", "Memorystick MSC-U03", US_SC_UFI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), /* Submitted by Nathan Babb */ UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, "Sony", "PEG Mass Storage", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Mike Alborn */ UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, "Sony", "PEG Mass Storage", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Frank Engel */ UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, "Sony", "PEG Mass Storage", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* floppy reports multiple luns */ UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, "SAMSUNG", "SFD-321U [FW 0C]", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, "Y-E Data", "Flashbuster-U", US_SC_DEVICE, US_PR_CB, NULL, US_FL_SINGLE_LUN), UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, "Y-E Data", "Flashbuster-U", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN), /* Reported by Johann Cardon * This entry is needed only because the device reports * bInterfaceClass = 0xff (vendor-specific) */ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Y-E Data", "Silicon Media R/W", US_SC_DEVICE, US_PR_DEVICE, NULL, 0), /* Fabrizio Fellini */ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Fujifilm", "Digital Camera EX-20 DSC", US_SC_8070, US_PR_CBI, NULL, 0 ), UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, "LaCie", "USB Hard Disk", US_SC_RBC, US_PR_CB, NULL, 0 ), #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, "In-System", "USB/IDE Bridge (ATA/ATAPI)", US_SC_ISD200, US_PR_BULK, isd200_Initialization, 0 ), UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, "In-System", "Portable USB Harddrive V2", US_SC_ISD200, US_PR_BULK, isd200_Initialization, 0 ), UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, "In-System", "Portable USB Harddrive V2", US_SC_ISD200, US_PR_BULK, isd200_Initialization, 0 ), UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, "In-System", "USB Storage Adapter V2", US_SC_ISD200, US_PR_BULK, isd200_Initialization, 0 ), #endif /* Submitted by Sven Anderson * There are at least four ProductIDs used for iPods, so I added 0x1202 and * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears * to change with firmware updates, I changed the range to maximum for all * iPod entries. */ UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, "Apple", "iPod", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Avi Kivity */ UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, "Apple", "iPod", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, "Apple", "iPod", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* * Reported by Tyson Vinson * This particular productId is the iPod Nano */ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, "Apple", "iPod", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), #ifdef CONFIG_USB_STORAGE_JUMPSHOT UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, "Lexar", "Jumpshot USB CF Reader", US_SC_SCSI, US_PR_JUMPSHOT, NULL, US_FL_MODE_XLATE ), #endif /* Reported by Blake Matheny */ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, "Lexar", "USB CF Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Reported by Carlos Villegas * This device needs an INQUIRY of exactly 36-bytes to function. * That is the only reason this entry is needed. */ UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0xffff, "Genesys Logic", "CompactFlash Card Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* The following two entries are for a Genesys USB to IDE * converter chip, but it changes its ProductId depending * on whether or not a disk or an optical device is enclosed * They were originally reported by Alexander Oltu * and Peter Marks * respectively. */ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MODE_XLATE ), /* Reported by Peter Marks * Like the Genesys Logic unit above, this unit needs an INQUIRY to ask for exactly * 36 bytes of data. No more, no less. That is the only reason this entry * is needed. * * ST818 slim drives (rev 0.02) don't need special care. */ UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0x0001, "Genesys Logic", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Reported by Hanno Boeck * Taken from the Lycoris Kernel */ UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, "Vivitar", "Vivicam 35Xx", US_SC_SCSI, US_PR_BULK, NULL, US_FL_FIX_INQUIRY | US_FL_MODE_XLATE), UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, "TEAC", "Floppy Drive", US_SC_UFI, US_PR_CB, NULL, 0 ), #ifdef CONFIG_USB_STORAGE_SDDR09 UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, "Olympus", "Camedia MAUSB-2", US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, US_FL_SINGLE_LUN ), #endif /* Reported by Darsen Lu */ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, "SigmaTel", "USBMSC Audio Player", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Submitted by Benny Sjostrand */ UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, "Minolta", "Dimage F300", US_SC_SCSI, US_PR_BULK, NULL, 0 ), /* Reported by Miguel A. Fosas */ UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, "Minolta", "DIMAGE E223", US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), /* Following three Minolta cameras reported by Martin Pool * . Originally discovered by Kedar Petankar, * Matthew Geier, Mikael Lofj"ard, Marcel de Boer. */ UNUSUAL_DEV( 0x0686, 0x4006, 0x0001, 0x0001, "Minolta", "DiMAGE 7", US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0686, 0x400b, 0x0001, 0x0001, "Minolta", "DiMAGE 7i", US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0686, 0x400f, 0x0001, 0x0001, "Minolta", "DiMAGE 7Hi", US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100, "Hagiwara", "FlashGate SmartMedia", US_SC_SCSI, US_PR_BULK, NULL, 0 ), UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, "Hagiwara", "Flashgate", US_SC_SCSI, US_PR_BULK, NULL, 0 ), /* Reported by David Hamilton */ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, "Thomson Multimedia Inc.", "RCA RD1080 MP3 Player", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, "Sandisk", "ImageMate SDDR-05a", US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, "Sandisk", "ImageMate SDDR-31", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_SER ), UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, "Sandisk", "ImageMate SDDR-12", US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), #ifdef CONFIG_USB_STORAGE_SDDR09 UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, "Sandisk", "ImageMate SDDR-09", US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, US_FL_SINGLE_LUN ), #endif #ifdef CONFIG_USB_STORAGE_FREECOM UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, "Freecom", "USB-IDE", US_SC_QIC, US_PR_FREECOM, freecom_init, 0), #endif /* Reported by Eero Volotinen */ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, "Freecom Technologies", "FHD-Classic", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, "Microtech", "USB-SCSI-DB25", US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, "Microtech", "USB-SCSI-HD50", US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), #ifdef CONFIG_USB_STORAGE_DPCM UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, "Microtech", "CameraMate (DPCM_USB)", US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), #endif #ifdef CONFIG_USB_STORAGE_DATAFAB UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, "Datafab", "MDCFE-B USB CF Reader", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), /* * The following Datafab-based devices may or may not work * using the current driver...the 0xffff is arbitrary since I * don't know what device versions exist for these guys. * * The 0xa003 and 0xa004 devices in particular I'm curious about. * I'm told they exist but so far nobody has come forward to say that * they work with this driver. Given the success we've had getting * other Datafab-based cards operational with this driver, I've decided * to leave these two devices in the list. */ UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, "SIIG/Datafab", "SIIG/Datafab Memory Stick+CF Reader/Writer", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, "Datafab/Unknown", "Datafab-based Reader", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, "Datafab/Unknown", "Datafab-based Reader", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, "PNY/Datafab", "PNY/Datafab CF+SM Reader", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, "Simple Tech/Datafab", "Simple Tech/Datafab CF+SM Reader", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), #endif #ifdef CONFIG_USB_STORAGE_SDDR55 /* Contributed by Peter Waechtler */ UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, "Datafab", "MDSM-B reader", US_SC_SCSI, US_PR_SDDR55, NULL, US_FL_FIX_INQUIRY ), #endif #ifdef CONFIG_USB_STORAGE_DATAFAB /* Submitted by Olaf Hering */ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, "Datafab Systems, Inc.", "USB to CF + SM Combo (LC1)", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_MODE_XLATE ), #endif #ifdef CONFIG_USB_STORAGE_SDDR55 /* SM part - aeb */ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, "Datafab Systems, Inc.", "USB to CF + SM Combo (LC1)", US_SC_SCSI, US_PR_SDDR55, NULL, US_FL_SINGLE_LUN ), #endif #ifdef CONFIG_USB_STORAGE_DATAFAB /* Reported by Felix Moeller * in Germany this is sold by Hama with the productnumber 46952 * as "DualSlot CompactFlash(TM) & MStick Drive USB" */ UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, "DataFab Systems Inc.", "USB CF+MS", US_SC_SCSI, US_PR_DATAFAB, NULL, 0 ), #endif /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. * Submitted by Marek Michalkiewicz . * See also http://martin.wilck.bei.t-online.de/#kecf . */ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", "KECF-USB", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: * - They tell us they are using transport protocol CBI. In reality they * are using transport protocol CB. * - They don't like the INQUIRY command. So we must handle this command * of the SCSI layer ourselves. */ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, "Casio", "QV DigitalCamera", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Hartmut Wahl */ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, "Samsung", "Digimax 410", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Aiptek PocketCAM 3Mega * Nicolas DUPEUX */ UNUSUAL_DEV( 0x08ca, 0x2011, 0x0000, 0x9999, "AIPTEK", "PocketCAM 3Mega", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MODE_XLATE ), /* Submitted by Jan De Luyck */ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, "CITIZEN", "X1DE-USB", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN), /*Medion 6047 Digital Camera Davide Andrian <_nessuno_@katamail.com> */ UNUSUAL_DEV( 0x08ca, 0x2011, 0x0001, 0x0001, "3MegaCam", "3MegaCam", US_SC_DEVICE, US_PR_BULK, NULL, US_FL_MODE_XLATE ), /* Entry needed for flags. Moreover, all devices with this ID use * bulk-only transport, but _some_ falsely report Control/Bulk instead. * One example is "Trumpion Digital Research MYMP3". * Submitted by Bjoern Brill */ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, "Trumpion", "t33520 USB Flash Card Controller", US_SC_DEVICE, US_PR_BULK, NULL, US_FL_MODE_XLATE), /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, "Trumpion", "MP3 player", US_SC_RBC, US_PR_BULK, NULL, US_FL_MODE_XLATE), /* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya", "5-in-1 Card Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), UNUSUAL_DEV( 0x097a, 0x0001, 0x0000, 0x0001, "Minds@Work", "Digital Wallet", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MODE_XLATE ), UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100, "IBM", "IBM USB Memory Key", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* This Pentax still camera is not conformant * to the USB storage specification: - * - It does not like the INQUIRY command. So we must handle this command * of the SCSI layer ourselves. * Tested on Rev. 10.00 (0x1000) * Submitted by James Courtier-Dutton */ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, "Pentax", "Optio 2/3/400", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Per Winkvist */ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, "Pentax", "Optio S/S4", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", "USB Cable 205", US_SC_ISD200, US_PR_BULK, isd200_Initialization, 0 ), #endif #ifdef CONFIG_USB_STORAGE_DATAFAB UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, "Acomdata", "CF", US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_SINGLE_LUN ), #endif #ifdef CONFIG_USB_STORAGE_SDDR55 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, "Acomdata", "SM", US_SC_SCSI, US_PR_SDDR55, NULL, US_FL_SINGLE_LUN ), #endif /* * Pete Zaitcev , bz#164688. * The device blatantly ignores LUN and returns 1 in GetMaxLUN. */ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, "Unknown", "Unknown", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Joris Struyve */ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, "Medion", "MD 7425", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* * Entry for Jenoptik JD 5200z3 * * email: car.busse@gmx.de */ UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, "Jenoptik", "JD 5200 z3", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Reported by Lubomir Blaha * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this * works for me. Can anybody correct these values? (I able to test corrected * version.) */ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, "Netac", "USB-CF-Card", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Antoine Mairesse */ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, "USB", "Solid state disk", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Reported by Jan Mate */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, "Sony Ericsson", "P990i", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Emmanuel Vasilakis */ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", "M600i", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Kevin Cernekee * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. */ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999, "Desknote", "UCR-61S2B", US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ), /* Reported by Dan Pilone * The device needs the flags only. * Also reported by Brian Hall , again for flags. * I also suspect this device may have a broken serial number. */ UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x9999, "CCYU TECHNOLOGY", "EasyDisk Portable Device", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MODE_XLATE ), /* Reported by Vilius Bilinkevicius */ UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100, "Kyocera", "Finecam L3", US_SC_SCSI, US_PR_BULK, NULL, US_FL_FIX_INQUIRY), /* Reported by Thomas Baechler * Fixes I/O errors with Teac HD-35PU devices * svr: last param was US_FL_IGNORE_RESIDUE, but unknown in 2.4 */ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, "Super Top", "USB 2.0 IDE DEVICE", US_SC_DEVICE, US_PR_DEVICE, NULL, 0),