/* * USB IR Dongle driver * * Copyright (C) 2001-2002 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2002 Gary Brubaker (xavyer@ix.netcom.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This driver allows a USB IrDA device to be used as a "dumb" serial device. * This can be useful if you do not have access to a full IrDA stack on the * other side of the connection. If you do have an IrDA stack on both devices, * please use the usb-irda driver, as it contains the proper error checking and * other goodness of a full IrDA stack. * * Portions of this driver were taken from drivers/net/irda/irda-usb.c, which * was written by Roman Weissgaerber , Dag Brattli * , and Jean Tourrilhes * * See Documentation/usb/usb-serial.txt for more information on using this driver * * 2002_Mar_07 greg kh * moved some needed structures and #define values from the * net/irda/irda-usb.h file into our file, as we don't want to depend on * that codebase compiling correctly :) * * 2002_Jan_14 gb * Added module parameter to force specific number of XBOFs. * Added ir_xbof_change(). * Reorganized read_bulk_callback error handling. * Switched from FILL_BULK_URB() to usb_fill_bulk_urb(). * * 2001_Nov_08 greg kh * Changed the irda_usb_find_class_desc() function based on comments and * code from Martin Diehl. * * 2001_Nov_01 greg kh * Added support for more IrDA USB devices. * Added support for zero packet. Added buffer override paramater, so * users can transfer larger packets at once if they wish. Both patches * came from Dag Brattli . * * 2001_Oct_07 greg kh * initial version released. */ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_USB_SERIAL_DEBUG static int debug = 1; #else static int debug; #endif #include "usb-serial.h" /* * Version Information */ #define DRIVER_VERSION "v0.4" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB IR Dongle driver" /* USB IrDA class spec information */ #define USB_CLASS_IRDA 0x02 #define USB_DT_IRDA 0x21 #define IU_REQ_GET_CLASS_DESC 0x06 #define SPEED_2400 0x01 #define SPEED_9600 0x02 #define SPEED_19200 0x03 #define SPEED_38400 0x04 #define SPEED_57600 0x05 #define SPEED_115200 0x06 #define SPEED_576000 0x07 #define SPEED_1152000 0x08 #define SPEED_4000000 0x09 struct irda_class_desc { u8 bLength; u8 bDescriptorType; u16 bcdSpecRevision; u8 bmDataSize; u8 bmWindowSize; u8 bmMinTurnaroundTime; u16 wBaudRate; u8 bmAdditionalBOFs; u8 bIrdaRateSniff; u8 bMaxUnicastList; } __attribute__ ((packed)); /* if overridden by the user, then use their value for the size of the read and * write urbs */ static int buffer_size = 0; /* if overridden by the user, then use the specified number of XBOFs */ static int xbof = -1; static int ir_startup (struct usb_serial *serial); static int ir_open (struct usb_serial_port *port, struct file *filep); static void ir_close (struct usb_serial_port *port, struct file *filep); static int ir_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count); static void ir_write_bulk_callback (struct urb *urb); static void ir_read_bulk_callback (struct urb *urb); static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios); static u8 ir_baud = 0; static u8 ir_xbof = 0; static u8 ir_add_bof = 0; static struct usb_device_id id_table [] = { { USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */ { USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */ { USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */ { USB_INTERFACE_INFO (USB_CLASS_APP_SPEC, USB_CLASS_IRDA, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, id_table); struct usb_serial_device_type ir_device = { .owner = THIS_MODULE, .name = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, .num_bulk_out = 1, .num_ports = 1, .set_termios = ir_set_termios, .startup = ir_startup, .open = ir_open, .close = ir_close, .write = ir_write, .write_bulk_callback = ir_write_bulk_callback, .read_bulk_callback = ir_read_bulk_callback, }; static inline void irda_usb_dump_class_desc(struct irda_class_desc *desc) { dbg("bLength=%x", desc->bLength); dbg("bDescriptorType=%x", desc->bDescriptorType); dbg("bcdSpecRevision=%x", desc->bcdSpecRevision); dbg("bmDataSize=%x", desc->bmDataSize); dbg("bmWindowSize=%x", desc->bmWindowSize); dbg("bmMinTurnaroundTime=%d", desc->bmMinTurnaroundTime); dbg("wBaudRate=%x", desc->wBaudRate); dbg("bmAdditionalBOFs=%x", desc->bmAdditionalBOFs); dbg("bIrdaRateSniff=%x", desc->bIrdaRateSniff); dbg("bMaxUnicastList=%x", desc->bMaxUnicastList); } /*------------------------------------------------------------------*/ /* * Function irda_usb_find_class_desc(dev, ifnum) * * Returns instance of IrDA class descriptor, or NULL if not found * * The class descriptor is some extra info that IrDA USB devices will * offer to us, describing their IrDA characteristics. We will use that in * irda_usb_init_qos() * * Based on the same function in drivers/net/irda/irda-usb.c */ static struct irda_class_desc *irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum) { struct irda_class_desc *desc; int ret; desc = kmalloc(sizeof (struct irda_class_desc), GFP_KERNEL); if (desc == NULL) return NULL; memset(desc, 0, sizeof(struct irda_class_desc)); ret = usb_control_msg(dev, usb_rcvctrlpipe(dev,0), IU_REQ_GET_CLASS_DESC, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, ifnum, desc, sizeof(*desc), HZ); dbg("%s - ret=%d", __FUNCTION__, ret); if (ret < sizeof(*desc)) { dbg("%s - class descriptor read %s (%d)", __FUNCTION__, (ret<0) ? "failed" : "too short", ret); goto error; } if (desc->bDescriptorType != USB_DT_IRDA) { dbg("%s - bad class descriptor type", __FUNCTION__); goto error; } irda_usb_dump_class_desc(desc); return desc; error: kfree(desc); return NULL; } static u8 ir_xbof_change(u8 xbof) { u8 result; /* reference irda-usb.c */ switch(xbof) { case 48: result = 0x10; break; case 28: case 24: result = 0x20; break; default: case 12: result = 0x30; break; case 5: case 6: result = 0x40; break; case 3: result = 0x50; break; case 2: result = 0x60; break; case 1: result = 0x70; break; case 0: result = 0x80; break; } return(result); } static int ir_startup (struct usb_serial *serial) { struct irda_class_desc *irda_desc; irda_desc = irda_usb_find_class_desc (serial->dev, 0); if (irda_desc == NULL) { err ("IRDA class descriptor not found, device not bound"); return -ENODEV; } dbg ("%s - Baud rates supported:%s%s%s%s%s%s%s%s%s", __FUNCTION__, (irda_desc->wBaudRate & 0x0001) ? " 2400" : "", (irda_desc->wBaudRate & 0x0002) ? " 9600" : "", (irda_desc->wBaudRate & 0x0004) ? " 19200" : "", (irda_desc->wBaudRate & 0x0008) ? " 38400" : "", (irda_desc->wBaudRate & 0x0010) ? " 57600" : "", (irda_desc->wBaudRate & 0x0020) ? " 115200" : "", (irda_desc->wBaudRate & 0x0040) ? " 576000" : "", (irda_desc->wBaudRate & 0x0080) ? " 1152000" : "", (irda_desc->wBaudRate & 0x0100) ? " 4000000" : ""); switch( irda_desc->bmAdditionalBOFs ) { case 0x01: ir_add_bof = 48; break; case 0x02: ir_add_bof = 24; break; case 0x04: ir_add_bof = 12; break; case 0x08: ir_add_bof = 6; break; case 0x10: ir_add_bof = 3; break; case 0x20: ir_add_bof = 2; break; case 0x40: ir_add_bof = 1; break; case 0x80: ir_add_bof = 0; break; default:; } kfree (irda_desc); return 0; } static int ir_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; char *buffer; int result = 0; if (port_paranoia_check (port, __FUNCTION__)) return -ENODEV; dbg("%s - port %d", __FUNCTION__, port->number); if (buffer_size) { /* override the default buffer sizes */ buffer = kmalloc (buffer_size, GFP_KERNEL); if (!buffer) { err ("%s - out of memory.", __FUNCTION__); return -ENOMEM; } kfree (port->read_urb->transfer_buffer); port->read_urb->transfer_buffer = buffer; port->read_urb->transfer_buffer_length = buffer_size; buffer = kmalloc (buffer_size, GFP_KERNEL); if (!buffer) { err ("%s - out of memory.", __FUNCTION__); return -ENOMEM; } kfree (port->write_urb->transfer_buffer); port->write_urb->transfer_buffer = buffer; port->write_urb->transfer_buffer_length = buffer_size; port->bulk_out_size = buffer_size; } /* Start reading from the device */ usb_fill_bulk_urb ( port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ir_read_bulk_callback, port); port->read_urb->transfer_flags = USB_QUEUE_BULK; result = usb_submit_urb(port->read_urb); if (result) err("%s - failed submitting read urb, error %d", __FUNCTION__, result); return result; } static void ir_close (struct usb_serial_port *port, struct file * filp) { struct usb_serial *serial; if (port_paranoia_check (port, __FUNCTION__)) return; dbg("%s - port %d", __FUNCTION__, port->number); serial = get_usb_serial (port, __FUNCTION__); if (!serial) return; if (serial->dev) { /* shutdown our bulk read */ usb_unlink_urb (port->read_urb); } } static int ir_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count) { unsigned char *transfer_buffer; int result; int transfer_size; dbg("%s - port = %d, count = %d", __FUNCTION__, port->number, count); if (!port->tty) { err ("%s - no tty???", __FUNCTION__); return 0; } if (count == 0) return 0; if (port->write_urb->status == -EINPROGRESS) { dbg ("%s - already writing", __FUNCTION__); return 0; } transfer_buffer = port->write_urb->transfer_buffer; transfer_size = min(count, port->bulk_out_size - 1); /* * The first byte of the packet we send to the device contains an * inband header which indicates an additional number of BOFs and * a baud rate change. * * See section 5.4.2.2 of the USB IrDA spec. */ *transfer_buffer = ir_xbof | ir_baud; ++transfer_buffer; if (from_user) { if (copy_from_user (transfer_buffer, buf, transfer_size)) return -EFAULT; } else { memcpy (transfer_buffer, buf, transfer_size); } usb_fill_bulk_urb ( port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, transfer_size + 1, ir_write_bulk_callback, port); port->write_urb->transfer_flags = USB_QUEUE_BULK | USB_ZERO_PACKET; result = usb_submit_urb (port->write_urb); if (result) err("%s - failed submitting write urb, error %d", __FUNCTION__, result); else result = transfer_size; return result; } static void ir_write_bulk_callback (struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; if (port_paranoia_check (port, __FUNCTION__)) return; dbg("%s - port %d", __FUNCTION__, port->number); if (urb->status) { dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); return; } usb_serial_debug_data ( __FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer); queue_task(&port->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); return; } static void ir_read_bulk_callback (struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int result; if (port_paranoia_check (port, __FUNCTION__)) return; dbg("%s - port %d", __FUNCTION__, port->number); if (!serial) { dbg("%s - bad serial pointer, exiting", __FUNCTION__); return; } if (!port->open_count) { dbg("%s - port closed.", __FUNCTION__); return; } switch (urb->status) { case 0: /* Successful */ /* * The first byte of the packet we get from the device * contains a busy indicator and baud rate change. * See section 5.4.1.2 of the USB IrDA spec. */ if((*data & 0x0f) > 0) ir_baud = *data & 0x0f; usb_serial_debug_data ( __FILE__, __FUNCTION__, urb->actual_length, data); /* * Bypass flip-buffers, and feed the ldisc directly * due to our potentally large buffer size. Since we * used to set low_latency, this is exactly what the * tty layer did anyway :) */ tty = port->tty; tty->ldisc.receive_buf( tty, data+1, NULL, urb->actual_length-1); /* * No break here. * We want to resubmit the urb so we can read * again. */ case -EPROTO: /* taking inspiration from pl2303.c */ /* Continue trying to always read */ usb_fill_bulk_urb ( port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ir_read_bulk_callback, port); port->read_urb->transfer_flags = USB_QUEUE_BULK; result = usb_submit_urb(port->read_urb); if (result) err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); break ; default: dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); break ; } return; } static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned char *transfer_buffer; unsigned int cflag; int result; dbg("%s - port %d", __FUNCTION__, port->number); if ((!port->tty) || (!port->tty->termios)) { dbg("%s - no tty structures", __FUNCTION__); return; } cflag = port->tty->termios->c_cflag; /* check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { dbg("%s - nothing to change...", __FUNCTION__); return; } } /* All we can change is the baud rate */ if (cflag & CBAUD) { dbg ("%s - asking for baud %d", __FUNCTION__, tty_get_baud_rate(port->tty)); /* * FIXME, we should compare the baud request against the * capability stated in the IR header that we got in the * startup funtion. */ switch (cflag & CBAUD) { case B2400: ir_baud = SPEED_2400; break; default: case B9600: ir_baud = SPEED_9600; break; case B19200: ir_baud = SPEED_19200; break; case B38400: ir_baud = SPEED_38400; break; case B57600: ir_baud = SPEED_57600; break; case B115200: ir_baud = SPEED_115200; break; case B576000: ir_baud = SPEED_576000; break; case B1152000: ir_baud = SPEED_1152000; break; #ifdef B4000000 case B4000000: ir_baud = SPEED_4000000; break; #endif } if (xbof == -1) { ir_xbof = ir_xbof_change(ir_add_bof); } else { ir_xbof = ir_xbof_change(xbof) ; } /* Notify the tty driver that the termios have changed. */ port->tty->ldisc.set_termios(port->tty, NULL); /* FIXME need to check to see if our write urb is busy right * now, or use a urb pool. * * send the baud change out on an "empty" data packet */ transfer_buffer = port->write_urb->transfer_buffer; *transfer_buffer = ir_xbof | ir_baud; usb_fill_bulk_urb ( port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, 1, ir_write_bulk_callback, port); port->write_urb->transfer_flags = USB_QUEUE_BULK | USB_ZERO_PACKET; result = usb_submit_urb (port->write_urb); if (result) err("%s - failed submitting write urb, error %d", __FUNCTION__, result); } return; } static int __init ir_init (void) { usb_serial_register (&ir_device); info(DRIVER_DESC " " DRIVER_VERSION); return 0; } static void __exit ir_exit (void) { usb_serial_deregister (&ir_device); } module_init(ir_init); module_exit(ir_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_PARM(debug, "i"); MODULE_PARM_DESC(debug, "Debug enabled or not"); MODULE_PARM(xbof, "i"); MODULE_PARM_DESC(xbof, "Force specific number of XBOFs"); MODULE_PARM(buffer_size, "i"); MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");