/* $Id: aurora.c,v 1.18.2.1 2002/02/04 22:37:43 davem Exp $ * linux/drivers/sbus/char/aurora.c -- Aurora multiport driver * * Copyright (c) 1999 by Oliver Aldulea (oli at bv dot ro) * * This code is based on the RISCom/8 multiport serial driver written * by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial * driver, written by Linus Torvalds, Theodore T'so and others. * The Aurora multiport programming info was obtained mainly from the * Cirrus Logic CD180 documentation (available on the web), and by * doing heavy tests on the board. Many thanks to Eddie C. Dost for the * help on the sbus interface. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Revision 1.0 * * This is the first public release. * * Most of the information you need is in the aurora.h file. Please * read that file before reading this one. * * Several parts of the code do not have comments yet. * * n.b. The board can support 115.2 bit rates, but only on a few * ports. The total badwidth of one chip (ports 0-7 or 8-15) is equal * to OSC_FREQ div 16. In case of my board, each chip can take 6 * channels of 115.2 kbaud. This information is not well-tested. * * Fixed to use tty_get_baud_rate(). * Theodore Ts'o , 2001-Oct-12 */ #include #include #include #ifdef AURORA_INT_DEBUG #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "aurora.h" #include "cd180.h" unsigned char irqs[4] = { 0, 0, 0, 0 }; #ifdef AURORA_INT_DEBUG int irqhit=0; #endif #ifndef MIN #define MIN(a,b) ((a) < (b) ? (a) : (b)) #endif #define AURORA_TYPE_NORMAL 1 static struct tty_driver aurora_driver; static struct Aurora_board aurora_board[AURORA_NBOARD] = { {0,}, }; static struct Aurora_port aurora_port[AURORA_TNPORTS] = { { 0, }, }; /* no longer used. static struct Aurora_board * IRQ_to_board[16] = { NULL, } ;*/ static unsigned char * tmp_buf = NULL; static DECLARE_MUTEX(tmp_buf_sem); static int aurora_refcount = 0; static struct tty_struct * aurora_table[AURORA_TNPORTS] = { NULL, }; static struct termios * aurora_termios[AURORA_TNPORTS] = { NULL, }; static struct termios * aurora_termios_locked[AURORA_TNPORTS] = { NULL, }; DECLARE_TASK_QUEUE(tq_aurora); static inline int aurora_paranoia_check(struct Aurora_port const * port, kdev_t device, const char *routine) { #ifdef AURORA_PARANOIA_CHECK static const char *badmagic = KERN_DEBUG "aurora: Warning: bad aurora port magic number for device %s in %s\n"; static const char *badinfo = KERN_DEBUG "aurora: Warning: null aurora port for device %s in %s\n"; if (!port) { printk(badinfo, kdevname(device), routine); return 1; } if (port->magic != AURORA_MAGIC) { printk(badmagic, kdevname(device), routine); return 1; } #endif return 0; } /* * * Service functions for aurora driver. * */ /* Get board number from pointer */ static inline int board_No (struct Aurora_board const * bp) { return bp - aurora_board; } /* Get port number from pointer */ static inline int port_No (struct Aurora_port const * port) { return AURORA_PORT(port - aurora_port); } /* Get pointer to board from pointer to port */ static inline struct Aurora_board * port_Board(struct Aurora_port const * port) { return &aurora_board[AURORA_BOARD(port - aurora_port)]; } /* Wait for Channel Command Register ready */ static inline void aurora_wait_CCR(struct aurora_reg128 * r) { unsigned long delay; #ifdef AURORA_DEBUG printk("aurora_wait_CCR\n"); #endif /* FIXME: need something more descriptive than 100000 :) */ for (delay = 100000; delay; delay--) if (!sbus_readb(&r->r[CD180_CCR])) return; printk(KERN_DEBUG "aurora: Timeout waiting for CCR.\n"); } /* * aurora probe functions. */ /* Must be called with enabled interrupts */ static inline void aurora_long_delay(unsigned long delay) { unsigned long i; #ifdef AURORA_DEBUG printk("aurora_long_delay: start\n"); #endif for (i = jiffies + delay; time_before(jiffies, i); ) ; #ifdef AURORA_DEBUG printk("aurora_long_delay: end\n"); #endif } /* Reset and setup CD180 chip */ static int aurora_init_CD180(struct Aurora_board * bp, int chip) { unsigned long flags; int id; #ifdef AURORA_DEBUG printk("aurora_init_CD180: start %d:%d\n", board_No(bp), chip); #endif save_flags(flags); cli(); sbus_writeb(0, &bp->r[chip]->r[CD180_CAR]); sbus_writeb(0, &bp->r[chip]->r[CD180_GSVR]); /* Wait for CCR ready */ aurora_wait_CCR(bp->r[chip]); /* Reset CD180 chip */ sbus_writeb(CCR_HARDRESET, &bp->r[chip]->r[CD180_CCR]); udelay(1); sti(); id=1000; while((--id) && (sbus_readb(&bp->r[chip]->r[CD180_GSVR])!=0xff))udelay(100); if(!id) { printk(KERN_ERR "aurora%d: Chip %d failed init.\n", board_No(bp), chip); restore_flags(flags); return(-1); } cli(); sbus_writeb((board_No(bp)<<5)|((chip+1)<<3), &bp->r[chip]->r[CD180_GSVR]); /* Set ID for this chip */ sbus_writeb(0x80|bp->ACK_MINT, &bp->r[chip]->r[CD180_MSMR]); /* Prio for modem intr */ sbus_writeb(0x80|bp->ACK_TINT, &bp->r[chip]->r[CD180_TSMR]); /* Prio for transmitter intr */ sbus_writeb(0x80|bp->ACK_RINT, &bp->r[chip]->r[CD180_RSMR]); /* Prio for receiver intr */ /* Setting up prescaler. We need 4 tick per 1 ms */ sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) >> 8, &bp->r[chip]->r[CD180_PPRH]); sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) & 0xff, &bp->r[chip]->r[CD180_PPRL]); sbus_writeb(SRCR_AUTOPRI|SRCR_GLOBPRI, &bp->r[chip]->r[CD180_SRCR]); id = sbus_readb(&bp->r[chip]->r[CD180_GFRCR]); printk(KERN_INFO "aurora%d: Chip %d id %02x: ", board_No(bp), chip,id); if(sbus_readb(&bp->r[chip]->r[CD180_SRCR]) & 128) { switch (id) { case 0x82:printk("CL-CD1864 rev A\n");break; case 0x83:printk("CL-CD1865 rev A\n");break; case 0x84:printk("CL-CD1865 rev B\n");break; case 0x85:printk("CL-CD1865 rev C\n");break; default:printk("Unknown.\n"); }; } else { switch (id) { case 0x81:printk("CL-CD180 rev B\n");break; case 0x82:printk("CL-CD180 rev C\n");break; default:printk("Unknown.\n"); }; } restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_init_CD180: end\n"); #endif return 0; } static int valid_irq(unsigned char irq) { int i; for(i=0;iprom_name);*/ if (!strcmp(sdev->prom_name, "sio16")) { #ifdef AURORA_DEBUG printk(KERN_INFO "aurora: sio16 at %p\n",sdev); #endif if((sdev->reg_addrs[0].reg_size!=1) && (sdev->reg_addrs[1].reg_size!=128) && (sdev->reg_addrs[2].reg_size!=128) && (sdev->reg_addrs[3].reg_size!=4)) { printk(KERN_ERR "aurora%d: registers' sizes " "do not match.\n", bn); break; } bp = &aurora_board[bn]; bp->r0 = (struct aurora_reg1 *) sbus_ioremap(&sdev->resource[0], 0, sdev->reg_addrs[0].reg_size, "sio16"); if (bp->r0 == NULL) { printk(KERN_ERR "aurora%d: can't map " "reg_addrs[0]\n", bn); break; } #ifdef AURORA_DEBUG printk("Map reg 0: %p\n", bp->r0); #endif bp->r[0] = (struct aurora_reg128 *) sbus_ioremap(&sdev->resource[1], 0, sdev->reg_addrs[1].reg_size, "sio16"); if (bp->r[0] == NULL) { printk(KERN_ERR "aurora%d: can't map " "reg_addrs[1]\n", bn); break; } #ifdef AURORA_DEBUG printk("Map reg 1: %p\n", bp->r[0]); #endif bp->r[1] = (struct aurora_reg128 *) sbus_ioremap(&sdev->resource[2], 0, sdev->reg_addrs[2].reg_size, "sio16"); if (bp->r[1] == NULL) { printk(KERN_ERR "aurora%d: can't map " "reg_addrs[2]\n", bn); break; } #ifdef AURORA_DEBUG printk("Map reg 2: %p\n", bp->r[1]); #endif bp->r3 = (struct aurora_reg4 *) sbus_ioremap(&sdev->resource[3], 0, sdev->reg_addrs[3].reg_size, "sio16"); if (bp->r3 == NULL) { printk(KERN_ERR "aurora%d: can't map " "reg_addrs[3]\n", bn); break; } #ifdef AURORA_DEBUG printk("Map reg 3: %p\n", bp->r3); #endif /* Variables setup */ bp->flags = 0; #ifdef AURORA_DEBUG grrr=prom_getint(sdev->prom_node,"intr"); printk("intr pri %d\n", grrr); #endif if ((bp->irq=irqs[bn]) && valid_irq(bp->irq) && !request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) { free_irq(bp->irq|0x30, bp); } else if ((bp->irq=prom_getint(sdev->prom_node, "bintr")) && valid_irq(bp->irq) && !request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) { free_irq(bp->irq|0x30, bp); } else if ((bp->irq=prom_getint(sdev->prom_node, "intr")) && valid_irq(bp->irq) && !request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) { free_irq(bp->irq|0x30, bp); } else for(grrr=0;grrrirq=type_1_irq[grrr])&&!request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) { free_irq(bp->irq|0x30, bp); break; } else { printk(KERN_ERR "aurora%d: Could not get an irq for this board !!!\n",bn); bp->flags=0xff; } } if(bp->flags==0xff)break; printk(KERN_INFO "aurora%d: irq %d\n",bn,bp->irq&0x0f); buf[0]=0; grrr=prom_getproperty(sdev->prom_node,"dtr_rts",buf,sizeof(buf)); if(!strcmp(buf,"swapped")){ printk(KERN_INFO "aurora%d: Swapped DTR and RTS\n",bn); bp->DTR=MSVR_RTS; bp->RTS=MSVR_DTR; bp->MSVDTR=CD180_MSVRTS; bp->MSVRTS=CD180_MSVDTR; bp->flags|=AURORA_BOARD_DTR_FLOW_OK; }else{ #ifdef AURORA_FORCE_DTR_FLOW printk(KERN_INFO "aurora%d: Forcing swapped DTR-RTS\n",bn); bp->DTR=MSVR_RTS; bp->RTS=MSVR_DTR; bp->MSVDTR=CD180_MSVRTS; bp->MSVRTS=CD180_MSVDTR; bp->flags|=AURORA_BOARD_DTR_FLOW_OK; #else printk(KERN_INFO "aurora%d: Normal DTR and RTS\n",bn); bp->DTR=MSVR_DTR; bp->RTS=MSVR_RTS; bp->MSVDTR=CD180_MSVDTR; bp->MSVRTS=CD180_MSVRTS; #endif } bp->oscfreq=prom_getint(sdev->prom_node,"clk")*100; printk(KERN_INFO "aurora%d: Oscillator: %d Hz\n",bn,bp->oscfreq); grrr=prom_getproperty(sdev->prom_node,"chip",buf,sizeof(buf)); printk(KERN_INFO "aurora%d: Chips: %s\n",bn,buf); grrr=prom_getproperty(sdev->prom_node,"manu",buf,sizeof(buf)); printk(KERN_INFO "aurora%d: Manufacturer: %s\n",bn,buf); grrr=prom_getproperty(sdev->prom_node,"model",buf,sizeof(buf)); printk(KERN_INFO "aurora%d: Model: %s\n",bn,buf); grrr=prom_getproperty(sdev->prom_node,"rev",buf,sizeof(buf)); printk(KERN_INFO "aurora%d: Revision: %s\n",bn,buf); grrr=prom_getproperty(sdev->prom_node,"mode",buf,sizeof(buf)); printk(KERN_INFO "aurora%d: Mode: %s\n",bn,buf); #ifdef MODULE bp->count=0; #endif bp->flags = AURORA_BOARD_PRESENT; /* hardware ack */ bp->ACK_MINT=1; bp->ACK_TINT=2; bp->ACK_RINT=3; bn++; } } } return bn; } static void aurora_release_io_range(struct Aurora_board *bp) { sbus_iounmap((unsigned long)bp->r0, 1); sbus_iounmap((unsigned long)bp->r[0], 128); sbus_iounmap((unsigned long)bp->r[1], 128); sbus_iounmap((unsigned long)bp->r3, 4); } static inline void aurora_mark_event(struct Aurora_port * port, int event) { #ifdef AURORA_DEBUG printk("aurora_mark_event: start\n"); #endif set_bit(event, &port->event); queue_task(&port->tqueue, &tq_aurora); mark_bh(AURORA_BH); #ifdef AURORA_DEBUG printk("aurora_mark_event: end\n"); #endif } static __inline__ struct Aurora_port * aurora_get_port(struct Aurora_board const * bp, int chip, unsigned char const *what) { unsigned char channel; struct Aurora_port * port; channel = ((chip << 3) | ((sbus_readb(&bp->r[chip]->r[CD180_GSCR]) & GSCR_CHAN) >> GSCR_CHAN_OFF)); port = &aurora_port[board_No(bp) * AURORA_NPORT * AURORA_NCD180 + channel]; if (port->flags & ASYNC_INITIALIZED) return port; printk(KERN_DEBUG "aurora%d: %s interrupt from invalid port %d\n", board_No(bp), what, channel); return NULL; } static void aurora_receive_exc(struct Aurora_board const * bp, int chip) { struct Aurora_port *port; struct tty_struct *tty; unsigned char status; unsigned char ch; if (!(port = aurora_get_port(bp, chip, "Receive_x"))) return; tty = port->tty; if (tty->flip.count >= TTY_FLIPBUF_SIZE) { #ifdef AURORA_INTNORM printk("aurora%d: port %d: Working around flip buffer overflow.\n", board_No(bp), port_No(port)); #endif return; } #ifdef AURORA_REPORT_OVERRUN status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]); if (status & RCSR_OE) { port->overrun++; #if 1 printk("aurora%d: port %d: Overrun. Total %ld overruns.\n", board_No(bp), port_No(port), port->overrun); #endif } status &= port->mark_mask; #else status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]) & port->mark_mask; #endif ch = sbus_readb(&bp->r[chip]->r[CD180_RDR]); if (!status) return; if (status & RCSR_TOUT) { /* printk("aurora%d: port %d: Receiver timeout. Hardware problems ?\n", board_No(bp), port_No(port));*/ return; } else if (status & RCSR_BREAK) { printk(KERN_DEBUG "aurora%d: port %d: Handling break...\n", board_No(bp), port_No(port)); *tty->flip.flag_buf_ptr++ = TTY_BREAK; if (port->flags & ASYNC_SAK) do_SAK(tty); } else if (status & RCSR_PE) *tty->flip.flag_buf_ptr++ = TTY_PARITY; else if (status & RCSR_FE) *tty->flip.flag_buf_ptr++ = TTY_FRAME; else if (status & RCSR_OE) *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; else *tty->flip.flag_buf_ptr++ = 0; *tty->flip.char_buf_ptr++ = ch; tty->flip.count++; queue_task(&tty->flip.tqueue, &tq_timer); } static void aurora_receive(struct Aurora_board const * bp, int chip) { struct Aurora_port *port; struct tty_struct *tty; unsigned char count,cnt; if (!(port = aurora_get_port(bp, chip, "Receive"))) return; tty = port->tty; count = sbus_readb(&bp->r[chip]->r[CD180_RDCR]); #ifdef AURORA_REPORT_FIFO port->hits[count > 8 ? 9 : count]++; #endif while (count--) { if (tty->flip.count >= TTY_FLIPBUF_SIZE) { #ifdef AURORA_INTNORM printk("aurora%d: port %d: Working around flip buffer overflow.\n", board_No(bp), port_No(port)); #endif break; } cnt = sbus_readb(&bp->r[chip]->r[CD180_RDR]); *tty->flip.char_buf_ptr++ = cnt; *tty->flip.flag_buf_ptr++ = 0; tty->flip.count++; } queue_task(&tty->flip.tqueue, &tq_timer); } static void aurora_transmit(struct Aurora_board const * bp, int chip) { struct Aurora_port *port; struct tty_struct *tty; unsigned char count; if (!(port = aurora_get_port(bp, chip, "Transmit"))) return; tty = port->tty; if (port->SRER & SRER_TXEMPTY) { /* FIFO drained */ sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); port->SRER &= ~SRER_TXEMPTY; sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); return; } if ((port->xmit_cnt <= 0 && !port->break_length) || tty->stopped || tty->hw_stopped) { sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); port->SRER &= ~SRER_TXRDY; sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); return; } if (port->break_length) { if (port->break_length > 0) { if (port->COR2 & COR2_ETC) { sbus_writeb(CD180_C_ESC, &bp->r[chip]->r[CD180_TDR]); sbus_writeb(CD180_C_SBRK, &bp->r[chip]->r[CD180_TDR]); port->COR2 &= ~COR2_ETC; } count = MIN(port->break_length, 0xff); sbus_writeb(CD180_C_ESC, &bp->r[chip]->r[CD180_TDR]); sbus_writeb(CD180_C_DELAY, &bp->r[chip]->r[CD180_TDR]); sbus_writeb(count, &bp->r[chip]->r[CD180_TDR]); if (!(port->break_length -= count)) port->break_length--; } else { sbus_writeb(CD180_C_ESC, &bp->r[chip]->r[CD180_TDR]); sbus_writeb(CD180_C_EBRK, &bp->r[chip]->r[CD180_TDR]); sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_CORCHG2, &bp->r[chip]->r[CD180_CCR]); port->break_length = 0; } return; } count = CD180_NFIFO; do { u8 byte = port->xmit_buf[port->xmit_tail++]; sbus_writeb(byte, &bp->r[chip]->r[CD180_TDR]); port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); if (--port->xmit_cnt <= 0) break; } while (--count > 0); if (port->xmit_cnt <= 0) { sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); port->SRER &= ~SRER_TXRDY; sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); } if (port->xmit_cnt <= port->wakeup_chars) aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); } static void aurora_check_modem(struct Aurora_board const * bp, int chip) { struct Aurora_port *port; struct tty_struct *tty; unsigned char mcr; if (!(port = aurora_get_port(bp, chip, "Modem"))) return; tty = port->tty; mcr = sbus_readb(&bp->r[chip]->r[CD180_MCR]); if (mcr & MCR_CDCHG) { if (sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD) wake_up_interruptible(&port->open_wait); else if (!((port->flags & ASYNC_CALLOUT_ACTIVE) && (port->flags & ASYNC_CALLOUT_NOHUP))) { MOD_INC_USE_COUNT; if (schedule_task(&port->tqueue_hangup) == 0) MOD_DEC_USE_COUNT; } } /* We don't have such things yet. My aurora board has DTR and RTS swapped, but that doesn't count in this driver. Let's hope * Aurora didn't made any boards with CTS or DSR broken... */ /* #ifdef AURORA_BRAIN_DAMAGED_CTS if (mcr & MCR_CTSCHG) { if (aurora_in(bp, CD180_MSVR) & MSVR_CTS) { tty->hw_stopped = 0; port->SRER |= SRER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); } else { tty->hw_stopped = 1; port->SRER &= ~SRER_TXRDY; } sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); } if (mcr & MCR_DSRCHG) { if (aurora_in(bp, CD180_MSVR) & MSVR_DSR) { tty->hw_stopped = 0; port->SRER |= SRER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); } else { tty->hw_stopped = 1; port->SRER &= ~SRER_TXRDY; } sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); } #endif AURORA_BRAIN_DAMAGED_CTS */ /* Clear change bits */ sbus_writeb(0, &bp->r[chip]->r[CD180_MCR]); } /* The main interrupt processing routine */ static void aurora_interrupt(int irq, void * dev_id, struct pt_regs * regs) { unsigned char status; unsigned char ack,chip/*,chip_id*/; struct Aurora_board * bp = (struct Aurora_board *) dev_id; unsigned long loop = 0; #ifdef AURORA_INT_DEBUG printk("IRQ%d %d\n",irq,++irqhit); #ifdef AURORA_FLOODPRO if (irqhit>=AURORA_FLOODPRO) sbus_writeb(8, &bp->r0->r); #endif #endif /* old bp = IRQ_to_board[irq&0x0f];*/ if (!bp || !(bp->flags & AURORA_BOARD_ACTIVE)) return; /* The while() below takes care of this. status = sbus_readb(&bp->r[0]->r[CD180_SRSR]); #ifdef AURORA_INT_DEBUG printk("mumu: %02x\n", status); #endif if (!(status&SRSR_ANYINT)) return; * Nobody has anything to say, so exit * */ while ((loop++ < 48) && (status = sbus_readb(&bp->r[0]->r[CD180_SRSR]) & SRSR_ANYINT)){ #ifdef AURORA_INT_DEBUG printk("SRSR: %02x\n", status); #endif if (status & SRSR_REXT) { ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); #ifdef AURORA_INT_DEBUG printk("R-ACK %02x\n", ack); #endif if ((ack >> 5) == board_No(bp)) { if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { if ((ack&GSVR_ITMASK)==GSVR_IT_RGD) { aurora_receive(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } else if ((ack & GSVR_ITMASK) == GSVR_IT_REXC) { aurora_receive_exc(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } } } } else if (status & SRSR_TEXT) { ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); #ifdef AURORA_INT_DEBUG printk("T-ACK %02x\n", ack); #endif if ((ack >> 5) == board_No(bp)) { if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { if ((ack&GSVR_ITMASK)==GSVR_IT_TX) { aurora_transmit(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } } } } else if (status & SRSR_MEXT) { ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); #ifdef AURORA_INT_DEBUG printk("M-ACK %02x\n", ack); #endif if ((ack >> 5) == board_No(bp)) { if ((chip = ((ack>>3)&3)-1) < AURORA_NCD180) { if ((ack&GSVR_ITMASK)==GSVR_IT_MDM) { aurora_check_modem(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } } } } } /* I guess this faster code can be used with CD1865, using AUROPRI and GLOBPRI. */ #if 0 while ((loop++ < 48)&&(status=bp->r[0]->r[CD180_SRSR]&SRSR_ANYINT)){ #ifdef AURORA_INT_DEBUG printk("SRSR: %02x\n",status); #endif ack = sbus_readb(&bp->r3->r[0]); #ifdef AURORA_INT_DEBUG printk("ACK: %02x\n",ack); #endif if ((ack>>5)==board_No(bp)) { if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { ack&=GSVR_ITMASK; if (ack==GSVR_IT_RGD) { aurora_receive(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } else if (ack==GSVR_IT_REXC) { aurora_receive_exc(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } else if (ack==GSVR_IT_TX) { aurora_transmit(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } else if (ack==GSVR_IT_MDM) { aurora_check_modem(bp,chip); sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } } } } #endif /* This is the old handling routine, used in riscom8 for only one CD180. I keep it here for reference. */ #if 0 for(chip=0;chipr[chip]->r[CD180_SRSR])) & (SRSR_TEXT | SRSR_MEXT | SRSR_REXT))) { if (status & SRSR_REXT) { ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); if (ack == (chip_id | GSVR_IT_RGD)) { #ifdef AURORA_INTMSG printk("RX ACK\n"); #endif aurora_receive(bp,chip); } else if (ack == (chip_id | GSVR_IT_REXC)) { #ifdef AURORA_INTMSG printk("RXC ACK\n"); #endif aurora_receive_exc(bp,chip); } else { #ifdef AURORA_INTNORM printk("aurora%d-%d: Bad receive ack 0x%02x.\n", board_No(bp), chip, ack); #endif } } else if (status & SRSR_TEXT) { ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); if (ack == (chip_id | GSVR_IT_TX)){ #ifdef AURORA_INTMSG printk("TX ACK\n"); #endif aurora_transmit(bp,chip); } else { #ifdef AURORA_INTNORM printk("aurora%d-%d: Bad transmit ack 0x%02x.\n", board_No(bp), chip, ack); #endif } } else if (status & SRSR_MEXT) { ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); if (ack == (chip_id | GSVR_IT_MDM)){ #ifdef AURORA_INTMSG printk("MDM ACK\n"); #endif aurora_check_modem(bp,chip); } else { #ifdef AURORA_INTNORM printk("aurora%d-%d: Bad modem ack 0x%02x.\n", board_No(bp), chip, ack); #endif } } sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); } } #endif } #ifdef AURORA_INT_DEBUG static void aurora_timer (unsigned long ignored); static struct timer_list aurora_poll_timer = { NULL, NULL, 0, 0, aurora_timer }; static void aurora_timer (unsigned long ignored) { unsigned long flags; int i; save_flags(flags); cli(); printk("SRSR: %02x,%02x - ", sbus_readb(&aurora_board[0].r[0]->r[CD180_SRSR]), sbus_readb(&aurora_board[0].r[1]->r[CD180_SRSR])); for (i = 0; i < 4; i++) { udelay(1); printk("%02x ", sbus_readb(&aurora_board[0].r3->r[i])); } printk("\n"); aurora_poll_timer.expires = jiffies + 300; add_timer (&aurora_poll_timer); restore_flags(flags); } #endif /* * Routines for open & close processing. */ /* Called with disabled interrupts */ static int aurora_setup_board(struct Aurora_board * bp) { int error; #ifdef AURORA_ALLIRQ int i; for (i = 0; i < AURORA_ALLIRQ; i++) { error = request_irq(allirq[i]|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp); if (error) printk(KERN_ERR "IRQ%d request error %d\n", allirq[i], error); } #else error = request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp); if (error) { printk(KERN_ERR "IRQ request error %d\n", error); return error; } #endif /* Board reset */ sbus_writeb(0, &bp->r0->r); udelay(1); if (bp->flags & AURORA_BOARD_TYPE_2) { /* unknown yet */ } else { sbus_writeb((AURORA_CFG_ENABLE_IO | AURORA_CFG_ENABLE_IRQ | (((bp->irq)&0x0f)>>2)), &bp->r0->r); } udelay(10000); if (aurora_init_CD180(bp,0))error=1;error=0; if (aurora_init_CD180(bp,1))error++; if (error == AURORA_NCD180) { printk(KERN_ERR "Both chips failed initialisation.\n"); return -EIO; } #ifdef AURORA_INT_DEBUG aurora_poll_timer.expires= jiffies + 1; add_timer(&aurora_poll_timer); #endif #ifdef AURORA_DEBUG printk("aurora_setup_board: end\n"); #endif return 0; } /* Called with disabled interrupts */ static void aurora_shutdown_board(struct Aurora_board *bp) { int i; #ifdef AURORA_DEBUG printk("aurora_shutdown_board: start\n"); #endif #ifdef AURORA_INT_DEBUG del_timer(&aurora_poll_timer); #endif #ifdef AURORA_ALLIRQ for(i=0;iirq|0x30, bp); /* IRQ_to_board[bp->irq&0xf] = NULL;*/ #endif /* Drop all DTR's */ for(i=0;i<16;i++){ sbus_writeb(i & 7, &bp->r[i>>3]->r[CD180_CAR]); udelay(1); sbus_writeb(0, &bp->r[i>>3]->r[CD180_MSVR]); udelay(1); } /* Board shutdown */ sbus_writeb(0, &bp->r0->r); #ifdef AURORA_DEBUG printk("aurora_shutdown_board: end\n"); #endif } /* Setting up port characteristics. * Must be called with disabled interrupts */ static void aurora_change_speed(struct Aurora_board *bp, struct Aurora_port *port) { struct tty_struct *tty; unsigned long baud; long tmp; unsigned char cor1 = 0, cor3 = 0; unsigned char mcor1 = 0, mcor2 = 0,chip; #ifdef AURORA_DEBUG printk("aurora_change_speed: start\n"); #endif if (!(tty = port->tty) || !tty->termios) return; chip = AURORA_CD180(port_No(port)); port->SRER = 0; port->COR2 = 0; port->MSVR = MSVR_RTS|MSVR_DTR; baud = tty_get_baud_rate(tty); /* Select port on the board */ sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); if (!baud) { /* Drop DTR & exit */ port->MSVR &= ~(bp->DTR|bp->RTS); sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); return; } else { /* Set DTR on */ port->MSVR |= bp->DTR; sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); } /* Now we must calculate some speed dependant things. */ /* Set baud rate for port. */ tmp = (((bp->oscfreq + baud/2) / baud + CD180_TPC/2) / CD180_TPC); /* tmp = (bp->oscfreq/7)/baud; if((tmp%10)>4)tmp=tmp/10+1;else tmp=tmp/10;*/ /* printk("Prescaler period: %d\n",tmp);*/ sbus_writeb((tmp >> 8) & 0xff, &bp->r[chip]->r[CD180_RBPRH]); sbus_writeb((tmp >> 8) & 0xff, &bp->r[chip]->r[CD180_TBPRH]); sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_RBPRL]); sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_TBPRL]); baud = (baud + 5) / 10; /* Estimated CPS */ /* Two timer ticks seems enough to wakeup something like SLIP driver */ tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? SERIAL_XMIT_SIZE - 1 : tmp); /* Receiver timeout will be transmission time for 1.5 chars */ tmp = (AURORA_TPS + AURORA_TPS/2 + baud/2) / baud; tmp = (tmp > 0xff) ? 0xff : tmp; sbus_writeb(tmp, &bp->r[chip]->r[CD180_RTPR]); switch (C_CSIZE(tty)) { case CS5: cor1 |= COR1_5BITS; break; case CS6: cor1 |= COR1_6BITS; break; case CS7: cor1 |= COR1_7BITS; break; case CS8: cor1 |= COR1_8BITS; break; } if (C_CSTOPB(tty)) cor1 |= COR1_2SB; cor1 |= COR1_IGNORE; if (C_PARENB(tty)) { cor1 |= COR1_NORMPAR; if (C_PARODD(tty)) cor1 |= COR1_ODDP; if (I_INPCK(tty)) cor1 &= ~COR1_IGNORE; } /* Set marking of some errors */ port->mark_mask = RCSR_OE | RCSR_TOUT; if (I_INPCK(tty)) port->mark_mask |= RCSR_FE | RCSR_PE; if (I_BRKINT(tty) || I_PARMRK(tty)) port->mark_mask |= RCSR_BREAK; if (I_IGNPAR(tty)) port->mark_mask &= ~(RCSR_FE | RCSR_PE); if (I_IGNBRK(tty)) { port->mark_mask &= ~RCSR_BREAK; if (I_IGNPAR(tty)) /* Real raw mode. Ignore all */ port->mark_mask &= ~RCSR_OE; } /* Enable Hardware Flow Control */ if (C_CRTSCTS(tty)) { /*#ifdef AURORA_BRAIN_DAMAGED_CTS port->SRER |= SRER_DSR | SRER_CTS; mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; tty->hw_stopped = !(aurora_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR)); #else*/ port->COR2 |= COR2_CTSAE; /*#endif*/ if (bp->flags&AURORA_BOARD_DTR_FLOW_OK) { mcor1 |= AURORA_RXTH; } } /* Enable Software Flow Control. FIXME: I'm not sure about this */ /* Some people reported that it works, but I still doubt */ if (I_IXON(tty)) { port->COR2 |= COR2_TXIBE; cor3 |= (COR3_FCT | COR3_SCDE); if (I_IXANY(tty)) port->COR2 |= COR2_IXM; sbus_writeb(START_CHAR(tty), &bp->r[chip]->r[CD180_SCHR1]); sbus_writeb(STOP_CHAR(tty), &bp->r[chip]->r[CD180_SCHR2]); sbus_writeb(START_CHAR(tty), &bp->r[chip]->r[CD180_SCHR3]); sbus_writeb(STOP_CHAR(tty), &bp->r[chip]->r[CD180_SCHR4]); } if (!C_CLOCAL(tty)) { /* Enable CD check */ port->SRER |= SRER_CD; mcor1 |= MCOR1_CDZD; mcor2 |= MCOR2_CDOD; } if (C_CREAD(tty)) /* Enable receiver */ port->SRER |= SRER_RXD; /* Set input FIFO size (1-8 bytes) */ cor3 |= AURORA_RXFIFO; /* Setting up CD180 channel registers */ sbus_writeb(cor1, &bp->r[chip]->r[CD180_COR1]); sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); sbus_writeb(cor3, &bp->r[chip]->r[CD180_COR3]); /* Make CD180 know about registers change */ aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3, &bp->r[chip]->r[CD180_CCR]); /* Setting up modem option registers */ sbus_writeb(mcor1, &bp->r[chip]->r[CD180_MCOR1]); sbus_writeb(mcor2, &bp->r[chip]->r[CD180_MCOR2]); /* Enable CD180 transmitter & receiver */ aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_TXEN | CCR_RXEN, &bp->r[chip]->r[CD180_CCR]); /* Enable interrupts */ sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); /* And finally set RTS on */ sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); #ifdef AURORA_DEBUG printk("aurora_change_speed: end\n"); #endif } /* Must be called with interrupts enabled */ static int aurora_setup_port(struct Aurora_board *bp, struct Aurora_port *port) { unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_setup_port: start %d\n",port_No(port)); #endif if (port->flags & ASYNC_INITIALIZED) return 0; if (!port->xmit_buf) { /* We may sleep in get_free_page() */ unsigned long tmp; if (!(tmp = get_free_page(GFP_KERNEL))) return -ENOMEM; if (port->xmit_buf) { free_page(tmp); return -ERESTARTSYS; } port->xmit_buf = (unsigned char *) tmp; } save_flags(flags); cli(); if (port->tty) clear_bit(TTY_IO_ERROR, &port->tty->flags); #ifdef MODULE if (port->count == 1) { MOD_INC_USE_COUNT; if((++bp->count) == 1) bp->flags |= AURORA_BOARD_ACTIVE; } #endif port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; aurora_change_speed(bp, port); port->flags |= ASYNC_INITIALIZED; restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_setup_port: end\n"); #endif return 0; } /* Must be called with interrupts disabled */ static void aurora_shutdown_port(struct Aurora_board *bp, struct Aurora_port *port) { struct tty_struct *tty; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_shutdown_port: start\n"); #endif if (!(port->flags & ASYNC_INITIALIZED)) return; chip = AURORA_CD180(port_No(port)); #ifdef AURORA_REPORT_OVERRUN printk("aurora%d: port %d: Total %ld overruns were detected.\n", board_No(bp), port_No(port), port->overrun); #endif #ifdef AURORA_REPORT_FIFO { int i; printk("aurora%d: port %d: FIFO hits [ ", board_No(bp), port_No(port)); for (i = 0; i < 10; i++) { printk("%ld ", port->hits[i]); } printk("].\n"); } #endif if (port->xmit_buf) { free_page((unsigned long) port->xmit_buf); port->xmit_buf = NULL; } if (!(tty = port->tty) || C_HUPCL(tty)) { /* Drop DTR */ port->MSVR &= ~(bp->DTR|bp->RTS); sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); } /* Select port */ sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); /* Reset port */ aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_SOFTRESET, &bp->r[chip]->r[CD180_CCR]); /* Disable all interrupts from this port */ port->SRER = 0; sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); if (tty) set_bit(TTY_IO_ERROR, &tty->flags); port->flags &= ~ASYNC_INITIALIZED; #ifdef MODULE if (--bp->count < 0) { printk(KERN_DEBUG "aurora%d: aurora_shutdown_port: " "bad board count: %d\n", board_No(bp), bp->count); bp->count = 0; } MOD_DEC_USE_COUNT; if (!bp->count) bp->flags &= ~AURORA_BOARD_ACTIVE; #endif #ifdef AURORA_DEBUG printk("aurora_shutdown_port: end\n"); #endif } static int block_til_ready(struct tty_struct *tty, struct file * filp, struct Aurora_port *port) { DECLARE_WAITQUEUE(wait, current); struct Aurora_board *bp = port_Board(port); int retval; int do_clocal = 0; int CD; unsigned char chip; #ifdef AURORA_DEBUG printk("block_til_ready: start\n"); #endif chip = AURORA_CD180(port_No(port)); /* If the device is in the middle of being closed, then block * until it's done, and then try again. */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { interruptible_sleep_on(&port->close_wait); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; } /* If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { if (port->flags & ASYNC_CALLOUT_ACTIVE) return -EBUSY; port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } if (port->flags & ASYNC_CALLOUT_ACTIVE) { if (port->normal_termios.c_cflag & CLOCAL) do_clocal = 1; } else { if (C_CLOCAL(tty)) do_clocal = 1; } /* Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in * this loop, info->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; add_wait_queue(&port->open_wait, &wait); cli(); if (!tty_hung_up_p(filp)) port->count--; sti(); port->blocked_open++; while (1) { cli(); sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); CD = sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD; if (!(port->flags & ASYNC_CALLOUT_ACTIVE)) { port->MSVR=bp->RTS; /* auto drops DTR */ sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); } sti(); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; break; } if (/*!(port->flags & ASYNC_CALLOUT_ACTIVE) &&*/ !(port->flags & ASYNC_CLOSING) && (do_clocal || CD)) break; if (signal_pending(current)) { retval = -ERESTARTSYS; break; } schedule(); } current->state = TASK_RUNNING; remove_wait_queue(&port->open_wait, &wait); if (!tty_hung_up_p(filp)) port->count++; port->blocked_open--; if (retval) return retval; port->flags |= ASYNC_NORMAL_ACTIVE; #ifdef AURORA_DEBUG printk("block_til_ready: end\n"); #endif return 0; } static int aurora_open(struct tty_struct * tty, struct file * filp) { int board; int error; struct Aurora_port * port; struct Aurora_board * bp; unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_open: start\n"); #endif board = AURORA_BOARD(MINOR(tty->device)); if (board > AURORA_NBOARD || !(aurora_board[board].flags & AURORA_BOARD_PRESENT)) { #ifdef AURORA_DEBUG printk("aurora_open: error board %d present %d\n", board, aurora_board[board].flags & AURORA_BOARD_PRESENT); #endif return -ENODEV; } bp = &aurora_board[board]; port = aurora_port + board * AURORA_NPORT * AURORA_NCD180 + AURORA_PORT(MINOR(tty->device)); if (aurora_paranoia_check(port, tty->device, "aurora_open")) { #ifdef AURORA_DEBUG printk("aurora_open: error paranoia check\n"); #endif return -ENODEV; } port->count++; tty->driver_data = port; port->tty = tty; if ((error = aurora_setup_port(bp, port))) { #ifdef AURORA_DEBUG printk("aurora_open: error aurora_setup_port ret %d\n",error); #endif return error; } if ((error = block_til_ready(tty, filp, port))) { #ifdef AURORA_DEBUG printk("aurora_open: error block_til_ready ret %d\n",error); #endif return error; } if ((port->count == 1) && (port->flags & ASYNC_SPLIT_TERMIOS)) { *tty->termios = port->normal_termios; save_flags(flags); cli(); aurora_change_speed(bp, port); restore_flags(flags); } port->session = current->session; port->pgrp = current->pgrp; #ifdef AURORA_DEBUG printk("aurora_open: end\n"); #endif return 0; } static void aurora_close(struct tty_struct * tty, struct file * filp) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; unsigned long flags; unsigned long timeout; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_close: start\n"); #endif if (!port || aurora_paranoia_check(port, tty->device, "close")) return; chip = AURORA_CD180(port_No(port)); save_flags(flags); cli(); if (tty_hung_up_p(filp)) { restore_flags(flags); return; } bp = port_Board(port); if ((tty->count == 1) && (port->count != 1)) { printk(KERN_DEBUG "aurora%d: aurora_close: bad port count; " "tty->count is 1, port count is %d\n", board_No(bp), port->count); port->count = 1; } if (--port->count < 0) { printk(KERN_DEBUG "aurora%d: aurora_close: bad port " "count for tty%d: %d\n", board_No(bp), port_No(port), port->count); port->count = 0; } if (port->count) { restore_flags(flags); return; } port->flags |= ASYNC_CLOSING; /* Save the termios structure, since this port may have * separate termios for callout and dialin. */ if (port->flags & ASYNC_NORMAL_ACTIVE) port->normal_termios = *tty->termios; /* if (port->flags & ASYNC_CALLOUT_ACTIVE) port->callout_termios = *tty->termios;*/ /* Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE){ #ifdef AURORA_DEBUG printk("aurora_close: waiting to flush...\n"); #endif tty_wait_until_sent(tty, port->closing_wait); } /* At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ port->SRER &= ~SRER_RXD; if (port->flags & ASYNC_INITIALIZED) { port->SRER &= ~SRER_TXRDY; port->SRER |= SRER_TXEMPTY; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially * important if there is a transmit FIFO! */ timeout = jiffies+HZ; while(port->SRER & SRER_TXEMPTY) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(port->timeout); if (time_after(jiffies, timeout)) break; } } #ifdef AURORA_DEBUG printk("aurora_close: shutdown_port\n"); #endif aurora_shutdown_port(bp, port); if (tty->driver.flush_buffer) tty->driver.flush_buffer(tty); tty_ldisc_flush(tty); tty->closing = 0; port->event = 0; port->tty = 0; if (port->blocked_open) { if (port->close_delay) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(port->close_delay); } wake_up_interruptible(&port->open_wait); } port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE| ASYNC_CLOSING); wake_up_interruptible(&port->close_wait); restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_close: end\n"); #endif } static int aurora_write(struct tty_struct * tty, int from_user, const unsigned char *buf, int count) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; int c, total = 0; unsigned long flags; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_write: start %d\n",count); #endif if (aurora_paranoia_check(port, tty->device, "aurora_write")) return 0; chip = AURORA_CD180(port_No(port)); bp = port_Board(port); if (!tty || !port->xmit_buf || !tmp_buf) return 0; save_flags(flags); if (from_user) { down(&tmp_buf_sem); while (1) { c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, SERIAL_XMIT_SIZE - port->xmit_head)); if (c <= 0) break; c -= copy_from_user(tmp_buf, buf, c); if (!c) { if (!total) total = -EFAULT; break; } cli(); c = MIN(c, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, SERIAL_XMIT_SIZE - port->xmit_head)); memcpy(port->xmit_buf + port->xmit_head, tmp_buf, c); port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); port->xmit_cnt += c; restore_flags(flags); buf += c; count -= c; total += c; } up(&tmp_buf_sem); } else { while (1) { cli(); c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, SERIAL_XMIT_SIZE - port->xmit_head)); if (c <= 0) { restore_flags(flags); break; } memcpy(port->xmit_buf + port->xmit_head, buf, c); port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); port->xmit_cnt += c; restore_flags(flags); buf += c; count -= c; total += c; } } cli(); if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && !(port->SRER & SRER_TXRDY)) { port->SRER |= SRER_TXRDY; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); } restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_write: end %d\n",total); #endif return total; } static void aurora_put_char(struct tty_struct * tty, unsigned char ch) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_put_char: start %c\n",ch); #endif if (aurora_paranoia_check(port, tty->device, "aurora_put_char")) return; if (!tty || !port->xmit_buf) return; save_flags(flags); cli(); if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { restore_flags(flags); return; } port->xmit_buf[port->xmit_head++] = ch; port->xmit_head &= SERIAL_XMIT_SIZE - 1; port->xmit_cnt++; restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_put_char: end\n"); #endif } static void aurora_flush_chars(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; unsigned long flags; unsigned char chip; /*#ifdef AURORA_DEBUG printk("aurora_flush_chars: start\n"); #endif*/ if (aurora_paranoia_check(port, tty->device, "aurora_flush_chars")) return; chip = AURORA_CD180(port_No(port)); if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !port->xmit_buf) return; save_flags(flags); cli(); port->SRER |= SRER_TXRDY; sbus_writeb(port_No(port) & 7, &port_Board(port)->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->SRER, &port_Board(port)->r[chip]->r[CD180_SRER]); restore_flags(flags); /*#ifdef AURORA_DEBUG printk("aurora_flush_chars: end\n"); #endif*/ } static int aurora_write_room(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; int ret; #ifdef AURORA_DEBUG printk("aurora_write_room: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_write_room")) return 0; ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; if (ret < 0) ret = 0; #ifdef AURORA_DEBUG printk("aurora_write_room: end\n"); #endif return ret; } static int aurora_chars_in_buffer(struct tty_struct *tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; if (aurora_paranoia_check(port, tty->device, "aurora_chars_in_buffer")) return 0; return port->xmit_cnt; } static void aurora_flush_buffer(struct tty_struct *tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_flush_buffer: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_flush_buffer")) return; save_flags(flags); cli(); port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; restore_flags(flags); tty_wakeup(tty); #ifdef AURORA_DEBUG printk("aurora_flush_buffer: end\n"); #endif } static int aurora_get_modem_info(struct Aurora_port * port, unsigned int *value) { struct Aurora_board * bp; unsigned char status,chip; unsigned int result; unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_get_modem_info: start\n"); #endif chip = AURORA_CD180(port_No(port)); bp = port_Board(port); save_flags(flags); cli(); sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); status = sbus_readb(&bp->r[chip]->r[CD180_MSVR]); result = 0/*bp->r[chip]->r[AURORA_RI] & (1u << port_No(port)) ? 0 : TIOCM_RNG*/; restore_flags(flags); result |= ((status & bp->RTS) ? TIOCM_RTS : 0) | ((status & bp->DTR) ? TIOCM_DTR : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) | ((status & MSVR_DSR) ? TIOCM_DSR : 0) | ((status & MSVR_CTS) ? TIOCM_CTS : 0); put_user(result,(unsigned long *) value); #ifdef AURORA_DEBUG printk("aurora_get_modem_info: end\n"); #endif return 0; } static int aurora_set_modem_info(struct Aurora_port * port, unsigned int cmd, unsigned int *value) { unsigned int arg; unsigned long flags; struct Aurora_board *bp = port_Board(port); unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_set_modem_info: start\n"); #endif if (get_user(arg, value)) return -EFAULT; chip = AURORA_CD180(port_No(port)); switch (cmd) { case TIOCMBIS: if (arg & TIOCM_RTS) port->MSVR |= bp->RTS; if (arg & TIOCM_DTR) port->MSVR |= bp->DTR; break; case TIOCMBIC: if (arg & TIOCM_RTS) port->MSVR &= ~bp->RTS; if (arg & TIOCM_DTR) port->MSVR &= ~bp->DTR; break; case TIOCMSET: port->MSVR = (arg & TIOCM_RTS) ? (port->MSVR | bp->RTS) : (port->MSVR & ~bp->RTS); port->MSVR = (arg & TIOCM_DTR) ? (port->MSVR | bp->RTS) : (port->MSVR & ~bp->RTS); break; default: return -EINVAL; }; save_flags(flags); cli(); sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_set_modem_info: end\n"); #endif return 0; } static void aurora_send_break(struct Aurora_port * port, unsigned long length) { struct Aurora_board *bp = port_Board(port); unsigned long flags; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_send_break: start\n"); #endif chip = AURORA_CD180(port_No(port)); save_flags(flags); cli(); port->break_length = AURORA_TPS / HZ * length; port->COR2 |= COR2_ETC; port->SRER |= SRER_TXRDY; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_CORCHG2, &bp->r[chip]->r[CD180_CCR]); aurora_wait_CCR(bp->r[chip]); restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_send_break: end\n"); #endif } static int aurora_set_serial_info(struct Aurora_port * port, struct serial_struct * newinfo) { struct serial_struct tmp; struct Aurora_board *bp = port_Board(port); int change_speed; unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_set_serial_info: start\n"); #endif if (copy_from_user(&tmp, newinfo, sizeof(tmp))) return -EFAULT; #if 0 if ((tmp.irq != bp->irq) || (tmp.port != bp->base) || (tmp.type != PORT_CIRRUS) || (tmp.baud_base != (bp->oscfreq + CD180_TPC/2) / CD180_TPC) || (tmp.custom_divisor != 0) || (tmp.xmit_fifo_size != CD180_NFIFO) || (tmp.flags & ~AURORA_LEGAL_FLAGS)) return -EINVAL; #endif change_speed = ((port->flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); if (!capable(CAP_SYS_ADMIN)) { if ((tmp.close_delay != port->close_delay) || (tmp.closing_wait != port->closing_wait) || ((tmp.flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) return -EPERM; port->flags = ((port->flags & ~ASYNC_USR_MASK) | (tmp.flags & ASYNC_USR_MASK)); } else { port->flags = ((port->flags & ~ASYNC_FLAGS) | (tmp.flags & ASYNC_FLAGS)); port->close_delay = tmp.close_delay; port->closing_wait = tmp.closing_wait; } if (change_speed) { save_flags(flags); cli(); aurora_change_speed(bp, port); restore_flags(flags); } #ifdef AURORA_DEBUG printk("aurora_set_serial_info: end\n"); #endif return 0; } extern int aurora_get_serial_info(struct Aurora_port * port, struct serial_struct * retinfo) { struct serial_struct tmp; struct Aurora_board *bp = port_Board(port); int error; #ifdef AURORA_DEBUG printk("aurora_get_serial_info: start\n"); #endif error = verify_area(VERIFY_WRITE, (void *) retinfo, sizeof(tmp)); if (error) return error; memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_CIRRUS; tmp.line = port - aurora_port; tmp.port = 0; tmp.irq = bp->irq; tmp.flags = port->flags; tmp.baud_base = (bp->oscfreq + CD180_TPC/2) / CD180_TPC; tmp.close_delay = port->close_delay * HZ/100; tmp.closing_wait = port->closing_wait * HZ/100; tmp.xmit_fifo_size = CD180_NFIFO; copy_to_user(retinfo, &tmp, sizeof(tmp)); #ifdef AURORA_DEBUG printk("aurora_get_serial_info: end\n"); #endif return 0; } static int aurora_ioctl(struct tty_struct * tty, struct file * filp, unsigned int cmd, unsigned long arg) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; int retval; #ifdef AURORA_DEBUG printk("aurora_ioctl: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_ioctl")) return -ENODEV; switch (cmd) { case TCSBRK: /* SVID version: non-zero arg --> no break */ retval = tty_check_change(tty); if (retval) return retval; tty_wait_until_sent(tty, 0); if (!arg) aurora_send_break(port, HZ/4); /* 1/4 second */ return 0; case TCSBRKP: /* support for POSIX tcsendbreak() */ retval = tty_check_change(tty); if (retval) return retval; tty_wait_until_sent(tty, 0); aurora_send_break(port, arg ? arg*(HZ/10) : HZ/4); return 0; case TIOCGSOFTCAR: return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); case TIOCSSOFTCAR: if (get_user(arg,(unsigned long *)arg)) return -EFAULT; tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); return 0; case TIOCMGET: retval = verify_area(VERIFY_WRITE, (void *) arg, sizeof(unsigned int)); if (retval) return retval; return aurora_get_modem_info(port, (unsigned int *) arg); case TIOCMBIS: case TIOCMBIC: case TIOCMSET: return aurora_set_modem_info(port, cmd, (unsigned int *) arg); case TIOCGSERIAL: return aurora_get_serial_info(port, (struct serial_struct *) arg); case TIOCSSERIAL: return aurora_set_serial_info(port, (struct serial_struct *) arg); default: return -ENOIOCTLCMD; }; #ifdef AURORA_DEBUG printk("aurora_ioctl: end\n"); #endif return 0; } static void aurora_throttle(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; unsigned long flags; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_throttle: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_throttle")) return; bp = port_Board(port); chip = AURORA_CD180(port_No(port)); save_flags(flags); cli(); port->MSVR &= ~bp->RTS; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); if (I_IXOFF(tty)) { aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_SSCH2, &bp->r[chip]->r[CD180_CCR]); aurora_wait_CCR(bp->r[chip]); } sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_throttle: end\n"); #endif } static void aurora_unthrottle(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; unsigned long flags; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_unthrottle: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_unthrottle")) return; bp = port_Board(port); chip = AURORA_CD180(port_No(port)); save_flags(flags); cli(); port->MSVR |= bp->RTS; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); if (I_IXOFF(tty)) { aurora_wait_CCR(bp->r[chip]); sbus_writeb(CCR_SSCH1, &bp->r[chip]->r[CD180_CCR]); aurora_wait_CCR(bp->r[chip]); } sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_unthrottle: end\n"); #endif } static void aurora_stop(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; unsigned long flags; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_stop: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_stop")) return; bp = port_Board(port); chip = AURORA_CD180(port_No(port)); save_flags(flags); cli(); port->SRER &= ~SRER_TXRDY; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_stop: end\n"); #endif } static void aurora_start(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; unsigned long flags; unsigned char chip; #ifdef AURORA_DEBUG printk("aurora_start: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_start")) return; bp = port_Board(port); chip = AURORA_CD180(port_No(port)); save_flags(flags); cli(); if (port->xmit_cnt && port->xmit_buf && !(port->SRER & SRER_TXRDY)) { port->SRER |= SRER_TXRDY; sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); udelay(1); sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); } restore_flags(flags); #ifdef AURORA_DEBUG printk("aurora_start: end\n"); #endif } /* * This routine is called from the scheduler tqueue when the interrupt * routine has signalled that a hangup has occurred. The path of * hangup processing is: * * serial interrupt routine -> (scheduler tqueue) -> * do_aurora_hangup() -> tty->hangup() -> aurora_hangup() * */ static void do_aurora_hangup(void *private_) { struct Aurora_port *port = (struct Aurora_port *) private_; struct tty_struct *tty; #ifdef AURORA_DEBUG printk("do_aurora_hangup: start\n"); #endif tty = port->tty; if (tty != NULL) { tty_hangup(tty); /* FIXME: module removal race - AKPM */ #ifdef AURORA_DEBUG printk("do_aurora_hangup: end\n"); #endif } MOD_DEC_USE_COUNT; } static void aurora_hangup(struct tty_struct * tty) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; struct Aurora_board *bp; #ifdef AURORA_DEBUG printk("aurora_hangup: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_hangup")) return; bp = port_Board(port); aurora_shutdown_port(bp, port); port->event = 0; port->count = 0; port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE); port->tty = 0; wake_up_interruptible(&port->open_wait); #ifdef AURORA_DEBUG printk("aurora_hangup: end\n"); #endif } static void aurora_set_termios(struct tty_struct * tty, struct termios * old_termios) { struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; unsigned long flags; #ifdef AURORA_DEBUG printk("aurora_set_termios: start\n"); #endif if (aurora_paranoia_check(port, tty->device, "aurora_set_termios")) return; if (tty->termios->c_cflag == old_termios->c_cflag && tty->termios->c_iflag == old_termios->c_iflag) return; save_flags(flags); cli(); aurora_change_speed(port_Board(port), port); restore_flags(flags); if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { tty->hw_stopped = 0; aurora_start(tty); } #ifdef AURORA_DEBUG printk("aurora_set_termios: end\n"); #endif } static void do_aurora_bh(void) { run_task_queue(&tq_aurora); } static void do_softint(void *private_) { struct Aurora_port *port = (struct Aurora_port *) private_; struct tty_struct *tty; #ifdef AURORA_DEBUG printk("do_softint: start\n"); #endif tty = port->tty; if (tty == NULL) return; if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) { tty_wakeup(tty); } #ifdef AURORA_DEBUG printk("do_softint: end\n"); #endif } static int aurora_init_drivers(void) { int error; int i; #ifdef AURORA_DEBUG printk("aurora_init_drivers: start\n"); #endif tmp_buf = (unsigned char *) get_free_page(GFP_KERNEL); if (tmp_buf == NULL) { printk(KERN_ERR "aurora: Couldn't get free page.\n"); return 1; } init_bh(AURORA_BH, do_aurora_bh); /* memset(IRQ_to_board, 0, sizeof(IRQ_to_board));*/ memset(&aurora_driver, 0, sizeof(aurora_driver)); aurora_driver.magic = TTY_DRIVER_MAGIC; aurora_driver.name = "ttyA"; aurora_driver.major = AURORA_MAJOR; aurora_driver.num = AURORA_TNPORTS; aurora_driver.type = TTY_DRIVER_TYPE_SERIAL; aurora_driver.subtype = AURORA_TYPE_NORMAL; aurora_driver.init_termios = tty_std_termios; aurora_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; aurora_driver.flags = TTY_DRIVER_REAL_RAW; aurora_driver.refcount = &aurora_refcount; aurora_driver.table = aurora_table; aurora_driver.termios = aurora_termios; aurora_driver.termios_locked = aurora_termios_locked; aurora_driver.open = aurora_open; aurora_driver.close = aurora_close; aurora_driver.write = aurora_write; aurora_driver.put_char = aurora_put_char; aurora_driver.flush_chars = aurora_flush_chars; aurora_driver.write_room = aurora_write_room; aurora_driver.chars_in_buffer = aurora_chars_in_buffer; aurora_driver.flush_buffer = aurora_flush_buffer; aurora_driver.ioctl = aurora_ioctl; aurora_driver.throttle = aurora_throttle; aurora_driver.unthrottle = aurora_unthrottle; aurora_driver.set_termios = aurora_set_termios; aurora_driver.stop = aurora_stop; aurora_driver.start = aurora_start; aurora_driver.hangup = aurora_hangup; error = tty_register_driver(&aurora_driver); if (error) { free_page((unsigned long) tmp_buf); printk(KERN_ERR "aurora: Couldn't register aurora driver, error = %d\n", error); return 1; } memset(aurora_port, 0, sizeof(aurora_port)); for (i = 0; i < AURORA_TNPORTS; i++) { aurora_port[i].normal_termios = aurora_driver.init_termios; aurora_port[i].magic = AURORA_MAGIC; aurora_port[i].tqueue.routine = do_softint; aurora_port[i].tqueue.data = &aurora_port[i]; aurora_port[i].tqueue_hangup.routine = do_aurora_hangup; aurora_port[i].tqueue_hangup.data = &aurora_port[i]; aurora_port[i].close_delay = 50 * HZ/100; aurora_port[i].closing_wait = 3000 * HZ/100; init_waitqueue_head(&aurora_port[i].open_wait); init_waitqueue_head(&aurora_port[i].close_wait); } #ifdef AURORA_DEBUG printk("aurora_init_drivers: end\n"); #endif return 0; } static void aurora_release_drivers(void) { #ifdef AURORA_DEBUG printk("aurora_release_drivers: start\n"); #endif free_page((unsigned long)tmp_buf); tty_unregister_driver(&aurora_driver); #ifdef AURORA_DEBUG printk("aurora_release_drivers: end\n"); #endif } /* * Called at boot time. * * You can specify IO base for up to RC_NBOARD cards, * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. * Note that there will be no probing at default * addresses in this case. * */ void __init aurora_setup(char *str, int *ints) { int i; for(i=0;(i