/****************************************************************************** * * Name: skgesirq.c * Project: Gigabit Ethernet Adapters, Common Modules * Purpose: Special IRQ module * ******************************************************************************/ /****************************************************************************** * * (C)Copyright 1998-2002 SysKonnect. * (C)Copyright 2002-2003 Marvell. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * The information in this file is provided "AS IS" without warranty. * ******************************************************************************/ /* * Special Interrupt handler * * The following abstract should show how this module is included * in the driver path: * * In the ISR of the driver the bits for frame transmission complete and * for receive complete are checked and handled by the driver itself. * The bits of the slow path mask are checked after that and then the * entry into the so-called "slow path" is prepared. It is an implementors * decision whether this is executed directly or just scheduled by * disabling the mask. In the interrupt service routine some events may be * generated, so it would be a good idea to call the EventDispatcher * right after this ISR. * * The Interrupt source register of the adapter is NOT read by this module. * SO if the drivers implementor needs a while loop around the * slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for * each loop entered. * * However, the MAC Interrupt status registers are read in a while loop. * */ #if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) static const char SysKonnectFileId[] = "@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell."; #endif #include "h/skdrv1st.h" /* Driver Specific Definitions */ #ifndef SK_SLIM #include "h/skgepnmi.h" /* PNMI Definitions */ #include "h/skrlmt.h" /* RLMT Definitions */ #endif #include "h/skdrv2nd.h" /* Adapter Control and Driver specific Def. */ /* local function prototypes */ #ifdef GENESIS static int SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL); static int SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL); static void SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16); #endif /* GENESIS */ #ifdef YUKON static int SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL); static void SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16); #endif /* YUKON */ #ifdef OTHER_PHY static int SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL); static int SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL); static void SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16); #endif /* OTHER_PHY */ #ifdef GENESIS /* * array of Rx counter from XMAC which are checked * in AutoSense mode to check whether a link is not able to auto-negotiate. */ static const SK_U16 SkGeRxRegs[]= { XM_RXF_64B, XM_RXF_127B, XM_RXF_255B, XM_RXF_511B, XM_RXF_1023B, XM_RXF_MAX_SZ } ; #endif /* GENESIS */ #ifdef __C2MAN__ /* * Special IRQ function * * General Description: * */ intro() {} #endif /****************************************************************************** * * SkHWInitDefSense() - Default Autosensing mode initialization * * Description: sets the PLinkMode for HWInit * * Returns: N/A */ static void SkHWInitDefSense( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port) /* Port Index (MAC_1 + n) */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ pPrt = &pAC->GIni.GP[Port]; pPrt->PAutoNegTimeOut = 0; if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) { pPrt->PLinkMode = pPrt->PLinkModeConf; return; } SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("AutoSensing: First mode %d on Port %d\n", (int)SK_LMODE_AUTOFULL, Port)); pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; return; } /* SkHWInitDefSense */ #ifdef GENESIS /****************************************************************************** * * SkHWSenseGetNext() - Get Next Autosensing Mode * * Description: gets the appropriate next mode * * Note: * */ static SK_U8 SkHWSenseGetNext( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port) /* Port Index (MAC_1 + n) */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ pPrt = &pAC->GIni.GP[Port]; pPrt->PAutoNegTimeOut = 0; if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { /* Leave all as configured */ return(pPrt->PLinkModeConf); } if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) { /* Return next mode AUTOBOTH */ return ((SK_U8)SK_LMODE_AUTOBOTH); } /* Return default autofull */ return ((SK_U8)SK_LMODE_AUTOFULL); } /* SkHWSenseGetNext */ /****************************************************************************** * * SkHWSenseSetNext() - Autosensing Set next mode * * Description: sets the appropriate next mode * * Returns: N/A */ static void SkHWSenseSetNext( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port, /* Port Index (MAC_1 + n) */ SK_U8 NewMode) /* New Mode to be written in sense mode */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ pPrt = &pAC->GIni.GP[Port]; pPrt->PAutoNegTimeOut = 0; if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { return; } SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("AutoSensing: next mode %d on Port %d\n", (int)NewMode, Port)); pPrt->PLinkMode = NewMode; return; } /* SkHWSenseSetNext */ #endif /* GENESIS */ /****************************************************************************** * * SkHWLinkDown() - Link Down handling * * Description: handles the hardware link down signal * * Returns: N/A */ void SkHWLinkDown( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port) /* Port Index (MAC_1 + n) */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ pPrt = &pAC->GIni.GP[Port]; /* Disable all MAC interrupts */ SkMacIrqDisable(pAC, IoC, Port); /* Disable Receiver and Transmitter */ SkMacRxTxDisable(pAC, IoC, Port); /* Init default sense mode */ SkHWInitDefSense(pAC, IoC, Port); if (pPrt->PHWLinkUp == SK_FALSE) { return; } SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link down Port %d\n", Port)); /* Set Link to DOWN */ pPrt->PHWLinkUp = SK_FALSE; /* Reset Port stati */ pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED; /* Re-init Phy especially when the AutoSense default is set now */ SkMacInitPhy(pAC, IoC, Port, SK_FALSE); /* GP0: used for workaround of Rev. C Errata 2 */ /* Do NOT signal to RLMT */ /* Do NOT start the timer here */ } /* SkHWLinkDown */ /****************************************************************************** * * SkHWLinkUp() - Link Up handling * * Description: handles the hardware link up signal * * Returns: N/A */ void SkHWLinkUp( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port) /* Port Index (MAC_1 + n) */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ pPrt = &pAC->GIni.GP[Port]; if (pPrt->PHWLinkUp) { /* We do NOT need to proceed on active link */ return; } pPrt->PHWLinkUp = SK_TRUE; pPrt->PAutoNegFail = SK_FALSE; pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF && pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL && pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) { /* Link is up and no Auto-negotiation should be done */ /* Link speed should be the configured one */ switch (pPrt->PLinkSpeed) { case SK_LSPEED_AUTO: /* default is 1000 Mbps */ case SK_LSPEED_1000MBPS: pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; break; case SK_LSPEED_100MBPS: pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; break; case SK_LSPEED_10MBPS: pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; break; } /* Set Link Mode Status */ if (pPrt->PLinkMode == SK_LMODE_FULL) { pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL; } else { pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF; } /* No flow control without auto-negotiation */ pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; /* enable Rx/Tx */ (void)SkMacRxTxEnable(pAC, IoC, Port); } } /* SkHWLinkUp */ /****************************************************************************** * * SkMacParity() - MAC parity workaround * * Description: handles MAC parity errors correctly * * Returns: N/A */ static void SkMacParity( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port) /* Port Index of the port failed */ { SK_EVPARA Para; SK_GEPORT *pPrt; /* GIni Port struct pointer */ SK_U32 TxMax; /* Tx Max Size Counter */ pPrt = &pAC->GIni.GP[Port]; /* Clear IRQ Tx Parity Error */ #ifdef GENESIS if (pAC->GIni.GIGenesis) { SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR); } #endif /* GENESIS */ #ifdef YUKON if (pAC->GIni.GIYukon) { /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE)); } #endif /* YUKON */ if (pPrt->PCheckPar) { if (Port == MAC_1) { SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG); } else { SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG); } Para.Para64 = Port; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = Port; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); return; } /* Check whether frames with a size of 1k were sent */ #ifdef GENESIS if (pAC->GIni.GIGenesis) { /* Snap statistic counters */ (void)SkXmUpdateStats(pAC, IoC, Port); (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax); } #endif /* GENESIS */ #ifdef YUKON if (pAC->GIni.GIYukon) { (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax); } #endif /* YUKON */ if (TxMax > 0) { /* From now on check the parity */ pPrt->PCheckPar = SK_TRUE; } } /* SkMacParity */ /****************************************************************************** * * SkGeHwErr() - Hardware Error service routine * * Description: handles all HW Error interrupts * * Returns: N/A */ static void SkGeHwErr( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ SK_U32 HwStatus) /* Interrupt status word */ { SK_EVPARA Para; SK_U16 Word; if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) { /* PCI Errors occured */ if ((HwStatus & IS_IRQ_STAT) != 0) { SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG); } else { SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG); } /* Reset all bits in the PCI STATUS register */ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); Para.Para64 = 0; SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); } #ifdef GENESIS if (pAC->GIni.GIGenesis) { if ((HwStatus & IS_NO_STAT_M1) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT); } if ((HwStatus & IS_NO_STAT_M2) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT); } if ((HwStatus & IS_NO_TIST_M1) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST); } if ((HwStatus & IS_NO_TIST_M2) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST); } } #endif /* GENESIS */ #ifdef YUKON if (pAC->GIni.GIYukon) { /* This is necessary only for Rx timing measurements */ if ((HwStatus & IS_IRQ_TIST_OV) != 0) { /* increment Time Stamp Timer counter (high) */ pAC->GIni.GITimeStampCnt++; /* Clear Time Stamp Timer IRQ */ SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ); } if ((HwStatus & IS_IRQ_SENSOR) != 0) { /* no sensors on 32-bit Yukon */ if (pAC->GIni.GIYukon32Bit) { /* disable HW Error IRQ */ pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; } } } #endif /* YUKON */ if ((HwStatus & IS_RAM_RD_PAR) != 0) { SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR); SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG); Para.Para64 = 0; SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); } if ((HwStatus & IS_RAM_WR_PAR) != 0) { SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR); SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG); Para.Para64 = 0; SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); } if ((HwStatus & IS_M1_PAR_ERR) != 0) { SkMacParity(pAC, IoC, MAC_1); } if ((HwStatus & IS_M2_PAR_ERR) != 0) { SkMacParity(pAC, IoC, MAC_2); } if ((HwStatus & IS_R1_PAR_ERR) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P); SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG); Para.Para64 = MAC_1; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((HwStatus & IS_R2_PAR_ERR) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P); SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG); Para.Para64 = MAC_2; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_2; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } } /* SkGeHwErr */ /****************************************************************************** * * SkGeSirqIsr() - Special Interrupt Service Routine * * Description: handles all non data transfer specific interrupts (slow path) * * Returns: N/A */ void SkGeSirqIsr( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ SK_U32 Istatus) /* Interrupt status word */ { SK_EVPARA Para; SK_U32 RegVal32; /* Read register value */ SK_GEPORT *pPrt; /* GIni Port struct pointer */ SK_U16 PhyInt; int i; if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) { /* read the HW Error Interrupt source */ SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); SkGeHwErr(pAC, IoC, RegVal32); } /* * Packet Timeout interrupts */ /* Check whether MACs are correctly initialized */ if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) && pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) { /* MAC 1 was not initialized but Packet timeout occured */ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004, SKERR_SIRQ_E004MSG); } if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) && pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) { /* MAC 2 was not initialized but Packet timeout occured */ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005, SKERR_SIRQ_E005MSG); } if ((Istatus & IS_PA_TO_RX1) != 0) { /* Means network is filling us up */ SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002, SKERR_SIRQ_E002MSG); SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1); } if ((Istatus & IS_PA_TO_RX2) != 0) { /* Means network is filling us up */ SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003, SKERR_SIRQ_E003MSG); SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2); } if ((Istatus & IS_PA_TO_TX1) != 0) { pPrt = &pAC->GIni.GP[0]; /* May be a normal situation in a server with a slow network */ SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1); #ifdef GENESIS if (pAC->GIni.GIGenesis) { /* * workaround: if in half duplex mode, check for Tx hangup. * Read number of TX'ed bytes, wait for 10 ms, then compare * the number with current value. If nothing changed, we assume * that Tx is hanging and do a FIFO flush (see event routine). */ if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && !pPrt->HalfDupTimerActive) { /* * many more pack. arb. timeouts may come in between, * we ignore those */ pPrt->HalfDupTimerActive = SK_TRUE; #ifdef XXX Len = sizeof(SK_U64); SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets, &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, 0), pAC->Rlmt.Port[0].Net->NetNumber); pPrt->LastOctets = Octets; #endif /* XXX */ /* Snap statistic counters */ (void)SkXmUpdateStats(pAC, IoC, 0); (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32); pPrt->LastOctets = (SK_U64)RegVal32 << 32; (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32); pPrt->LastOctets += RegVal32; Para.Para32[0] = 0; SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); } } #endif /* GENESIS */ } if ((Istatus & IS_PA_TO_TX2) != 0) { pPrt = &pAC->GIni.GP[1]; /* May be a normal situation in a server with a slow network */ SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2); #ifdef GENESIS if (pAC->GIni.GIGenesis) { /* workaround: see above */ if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && !pPrt->HalfDupTimerActive) { pPrt->HalfDupTimerActive = SK_TRUE; #ifdef XXX Len = sizeof(SK_U64); SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets, &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, 1), pAC->Rlmt.Port[1].Net->NetNumber); pPrt->LastOctets = Octets; #endif /* XXX */ /* Snap statistic counters */ (void)SkXmUpdateStats(pAC, IoC, 1); (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32); pPrt->LastOctets = (SK_U64)RegVal32 << 32; (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32); pPrt->LastOctets += RegVal32; Para.Para32[0] = 1; SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); } } #endif /* GENESIS */ } /* Check interrupts of the particular queues */ if ((Istatus & IS_R1_C) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C); SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006, SKERR_SIRQ_E006MSG); Para.Para64 = MAC_1; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((Istatus & IS_R2_C) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C); SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007, SKERR_SIRQ_E007MSG); Para.Para64 = MAC_2; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_2; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((Istatus & IS_XS1_C) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C); SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008, SKERR_SIRQ_E008MSG); Para.Para64 = MAC_1; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((Istatus & IS_XA1_C) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C); SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009, SKERR_SIRQ_E009MSG); Para.Para64 = MAC_1; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((Istatus & IS_XS2_C) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C); SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010, SKERR_SIRQ_E010MSG); Para.Para64 = MAC_2; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_2; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((Istatus & IS_XA2_C) != 0) { /* Clear IRQ */ SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C); SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011, SKERR_SIRQ_E011MSG); Para.Para64 = MAC_2; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); Para.Para32[0] = MAC_2; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } /* External reg interrupt */ if ((Istatus & IS_EXT_REG) != 0) { /* Test IRQs from PHY */ for (i = 0; i < pAC->GIni.GIMacsFound; i++) { pPrt = &pAC->GIni.GP[i]; if (pPrt->PState == SK_PRT_RESET) { continue; } #ifdef GENESIS if (pAC->GIni.GIGenesis) { switch (pPrt->PhyType) { case SK_PHY_XMAC: break; case SK_PHY_BCOM: SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt); if ((PhyInt & ~PHY_B_DEF_MSK) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Port %d Bcom Int: 0x%04X\n", i, PhyInt)); SkPhyIsrBcom(pAC, IoC, i, PhyInt); } break; #ifdef OTHER_PHY case SK_PHY_LONE: SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt); if ((PhyInt & PHY_L_DEF_MSK) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Port %d Lone Int: %x\n", i, PhyInt)); SkPhyIsrLone(pAC, IoC, i, PhyInt); } break; #endif /* OTHER_PHY */ } } #endif /* GENESIS */ #ifdef YUKON if (pAC->GIni.GIYukon) { /* Read PHY Interrupt Status */ SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt); if ((PhyInt & PHY_M_DEF_MSK) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Port %d Marv Int: 0x%04X\n", i, PhyInt)); SkPhyIsrGmac(pAC, IoC, i, PhyInt); } } #endif /* YUKON */ } } /* I2C Ready interrupt */ if ((Istatus & IS_I2C_READY) != 0) { #ifdef SK_SLIM SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); #else SkI2cIsr(pAC, IoC); #endif } /* SW forced interrupt */ if ((Istatus & IS_IRQ_SW) != 0) { /* clear the software IRQ */ SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ); } if ((Istatus & IS_LNK_SYNC_M1) != 0) { /* * We do NOT need the Link Sync interrupt, because it shows * us only a link going down. */ /* clear interrupt */ SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ); } /* Check MAC after link sync counter */ if ((Istatus & IS_MAC1) != 0) { /* IRQ from MAC 1 */ SkMacIrq(pAC, IoC, MAC_1); } if ((Istatus & IS_LNK_SYNC_M2) != 0) { /* * We do NOT need the Link Sync interrupt, because it shows * us only a link going down. */ /* clear interrupt */ SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ); } /* Check MAC after link sync counter */ if ((Istatus & IS_MAC2) != 0) { /* IRQ from MAC 2 */ SkMacIrq(pAC, IoC, MAC_2); } /* Timer interrupt (served last) */ if ((Istatus & IS_TIMINT) != 0) { /* check for HW Errors */ if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) { /* read the HW Error Interrupt source */ SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); SkGeHwErr(pAC, IoC, RegVal32); } SkHwtIsr(pAC, IoC); } } /* SkGeSirqIsr */ #ifdef GENESIS /****************************************************************************** * * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2 * * return: * 0 o.k. nothing needed * 1 Restart needed on this port */ static int SkGePortCheckShorts( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port) /* Which port should be checked */ { SK_U32 Shorts; /* Short Event Counter */ SK_U32 CheckShorts; /* Check value for Short Event Counter */ SK_U64 RxCts; /* Rx Counter (packets on network) */ SK_U32 RxTmp; /* Rx temp. Counter */ SK_U32 FcsErrCts; /* FCS Error Counter */ SK_GEPORT *pPrt; /* GIni Port struct pointer */ int Rtv; /* Return value */ int i; pPrt = &pAC->GIni.GP[Port]; /* Default: no action */ Rtv = SK_HW_PS_NONE; (void)SkXmUpdateStats(pAC, IoC, Port); /* Extra precaution: check for short Event counter */ (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); /* * Read Rx counters (packets seen on the network and not necessarily * really received. */ RxCts = 0; for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) { (void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp); RxCts += (SK_U64)RxTmp; } /* On default: check shorts against zero */ CheckShorts = 0; /* Extra precaution on active links */ if (pPrt->PHWLinkUp) { /* Reset Link Restart counter */ pPrt->PLinkResCt = 0; pPrt->PAutoNegTOCt = 0; /* If link is up check for 2 */ CheckShorts = 2; (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts); if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN && (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL)) { /* * This is autosensing and we are in the fallback * manual full/half duplex mode. */ if (RxCts == pPrt->PPrevRx) { /* Nothing received, restart link */ pPrt->PPrevFcs = FcsErrCts; pPrt->PPrevShorts = Shorts; return(SK_HW_PS_RESTART); } else { pPrt->PLipaAutoNeg = SK_LIPA_MANUAL; } } if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) || (!(FcsErrCts - pPrt->PPrevFcs))) { /* * Note: The compare with zero above has to be done the way shown, * otherwise the Linux driver will have a problem. */ /* * We received a bunch of frames or no CRC error occured on the * network -> ok. */ pPrt->PPrevRx = RxCts; pPrt->PPrevFcs = FcsErrCts; pPrt->PPrevShorts = Shorts; return(SK_HW_PS_NONE); } pPrt->PPrevFcs = FcsErrCts; } if ((Shorts - pPrt->PPrevShorts) > CheckShorts) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Short Event Count Restart Port %d \n", Port)); Rtv = SK_HW_PS_RESTART; } pPrt->PPrevShorts = Shorts; pPrt->PPrevRx = RxCts; return(Rtv); } /* SkGePortCheckShorts */ #endif /* GENESIS */ /****************************************************************************** * * SkGePortCheckUp() - Check if the link is up * * return: * 0 o.k. nothing needed * 1 Restart needed on this port * 2 Link came up */ static int SkGePortCheckUp( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port) /* Which port should be checked */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */ int Rtv; /* Return value */ Rtv = SK_HW_PS_NONE; pPrt = &pAC->GIni.GP[Port]; if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { AutoNeg = SK_FALSE; } else { AutoNeg = SK_TRUE; } #ifdef GENESIS if (pAC->GIni.GIGenesis) { switch (pPrt->PhyType) { case SK_PHY_XMAC: Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg); break; case SK_PHY_BCOM: Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg); break; #ifdef OTHER_PHY case SK_PHY_LONE: Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg); break; case SK_PHY_NAT: Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg); break; #endif /* OTHER_PHY */ } } #endif /* GENESIS */ #ifdef YUKON if (pAC->GIni.GIYukon) { Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg); } #endif /* YUKON */ return(Rtv); } /* SkGePortCheckUp */ #ifdef GENESIS /****************************************************************************** * * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2 * * return: * 0 o.k. nothing needed * 1 Restart needed on this port * 2 Link came up */ static int SkGePortCheckUpXmac( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port, /* Which port should be checked */ SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ { SK_U32 Shorts; /* Short Event Counter */ SK_GEPORT *pPrt; /* GIni Port struct pointer */ int Done; SK_U32 GpReg; /* General Purpose register value */ SK_U16 Isrc; /* Interrupt source register */ SK_U16 IsrcSum; /* Interrupt source register sum */ SK_U16 LpAb; /* Link Partner Ability */ SK_U16 ResAb; /* Resolved Ability */ SK_U16 ExtStat; /* Extended Status Register */ SK_U8 NextMode; /* Next AutoSensing Mode */ pPrt = &pAC->GIni.GP[Port]; if (pPrt->PHWLinkUp) { if (pPrt->PhyType != SK_PHY_XMAC) { return(SK_HW_PS_NONE); } else { return(SkGePortCheckShorts(pAC, IoC, Port)); } } IsrcSum = pPrt->PIsave; pPrt->PIsave = 0; /* Now wait for each port's link */ if (pPrt->PLinkBroken) { /* Link was broken */ XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); if ((GpReg & XM_GP_INP_ASS) == 0) { /* The Link is in sync */ XM_IN16(IoC, Port, XM_ISRC, &Isrc); IsrcSum |= Isrc; SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); if ((Isrc & XM_IS_INP_ASS) == 0) { /* It has been in sync since last time */ /* Restart the PORT */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link in sync Restart Port %d\n", Port)); (void)SkXmUpdateStats(pAC, IoC, Port); /* We now need to reinitialize the PrevShorts counter */ (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); pPrt->PPrevShorts = Shorts; pPrt->PLinkBroken = SK_FALSE; /* * Link Restart Workaround: * it may be possible that the other Link side * restarts its link as well an we detect * another LinkBroken. To prevent this * happening we check for a maximum number * of consecutive restart. If those happens, * we do NOT restart the active link and * check whether the link is now o.k. */ pPrt->PLinkResCt++; pPrt->PAutoNegTimeOut = 0; if (pPrt->PLinkResCt < SK_MAX_LRESTART) { return(SK_HW_PS_RESTART); } pPrt->PLinkResCt = 0; SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum)); } else { pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum)); /* Do nothing more if link is broken */ return(SK_HW_PS_NONE); } } else { /* Do nothing more if link is broken */ return(SK_HW_PS_NONE); } } else { /* Link was not broken, check if it is */ XM_IN16(IoC, Port, XM_ISRC, &Isrc); IsrcSum |= Isrc; if ((Isrc & XM_IS_INP_ASS) != 0) { XM_IN16(IoC, Port, XM_ISRC, &Isrc); IsrcSum |= Isrc; if ((Isrc & XM_IS_INP_ASS) != 0) { XM_IN16(IoC, Port, XM_ISRC, &Isrc); IsrcSum |= Isrc; if ((Isrc & XM_IS_INP_ASS) != 0) { pPrt->PLinkBroken = SK_TRUE; /* Re-Init Link partner Autoneg flag */ pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link broken Port %d\n", Port)); /* Cable removed-> reinit sense mode */ SkHWInitDefSense(pAC, IoC, Port); return(SK_HW_PS_RESTART); } } } else { SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc); if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) { return(SK_HW_PS_RESTART); } } } /* * here we usually can check whether the link is in sync and * auto-negotiation is done. */ XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); XM_IN16(IoC, Port, XM_ISRC, &Isrc); IsrcSum |= Isrc; SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) { if ((GpReg & XM_GP_INP_ASS) == 0) { /* Save Auto-negotiation Done interrupt only if link is in sync */ pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); } #ifdef DEBUG if ((pPrt->PIsave & XM_IS_AND) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg done rescheduled Port %d\n", Port)); } #endif /* DEBUG */ return(SK_HW_PS_NONE); } if (AutoNeg) { if ((IsrcSum & XM_IS_AND) != 0) { SkHWLinkUp(pAC, IoC, Port); Done = SkMacAutoNegDone(pAC, IoC, Port); if (Done != SK_AND_OK) { /* Get PHY parameters, for debugging only */ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb); SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n", Port, LpAb, ResAb)); /* Try next possible mode */ NextMode = SkHWSenseGetNext(pAC, IoC, Port); SkHWLinkDown(pAC, IoC, Port); if (Done == SK_AND_DUP_CAP) { /* GoTo next mode */ SkHWSenseSetNext(pAC, IoC, Port, NextMode); } return(SK_HW_PS_RESTART); } /* * Dummy Read extended status to prevent extra link down/ups * (clear Page Received bit if set) */ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat); return(SK_HW_PS_LINK); } /* AutoNeg not done, but HW link is up. Check for timeouts */ pPrt->PAutoNegTimeOut++; if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { /* Increase the Timeout counter */ pPrt->PAutoNegTOCt++; /* Timeout occured */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("AutoNeg timeout Port %d\n", Port)); if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { /* Set Link manually up */ SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Set manual full duplex Port %d\n", Port)); } if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && pPrt->PLipaAutoNeg == SK_LIPA_AUTO && pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) { /* * This is rather complicated. * we need to check here whether the LIPA_AUTO * we saw before is false alert. We saw at one * switch ( SR8800) that on boot time it sends * just one auto-neg packet and does no further * auto-negotiation. * Solution: we restart the autosensing after * a few timeouts. */ pPrt->PAutoNegTOCt = 0; pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; SkHWInitDefSense(pAC, IoC, Port); } /* Do the restart */ return(SK_HW_PS_RESTART); } } else { /* Link is up and we don't need more */ #ifdef DEBUG if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("ERROR: Lipa auto detected on port %d\n", Port)); } #endif /* DEBUG */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync(GP), Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); /* * Link sync (GP) and so assume a good connection. But if not received * a bunch of frames received in a time slot (maybe broken tx cable) * the port is restart. */ return(SK_HW_PS_LINK); } return(SK_HW_PS_NONE); } /* SkGePortCheckUpXmac */ /****************************************************************************** * * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY * * return: * 0 o.k. nothing needed * 1 Restart needed on this port * 2 Link came up */ static int SkGePortCheckUpBcom( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port, /* Which port should be checked */ SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ int Done; SK_U16 Isrc; /* Interrupt source register */ SK_U16 PhyStat; /* Phy Status Register */ SK_U16 ResAb; /* Master/Slave resolution */ SK_U16 Ctrl; /* Broadcom control flags */ #ifdef DEBUG SK_U16 LpAb; SK_U16 ExtStat; #endif /* DEBUG */ pPrt = &pAC->GIni.GP[Port]; /* Check for No HCD Link events (#10523) */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc); #ifdef xDEBUG if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT) == (PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) { SK_U32 Stat1, Stat2, Stat3; Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "CheckUp1 - Stat: %x, Mask: %x", (void *)Isrc, (void *)Stat1); Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2); Stat1 = Stat1 << 16 | Stat2; Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); Stat3 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); Stat2 = Stat2 << 16 | Stat3; CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "Ctrl/Stat: %x, AN Adv/LP: %x", (void *)Stat1, (void *)Stat2); Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); Stat1 = Stat1 << 16 | Stat2; Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); Stat3 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3); Stat2 = Stat2 << 16 | Stat3; CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", (void *)Stat1, (void *)Stat2); Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); Stat1 = Stat1 << 16 | Stat2; Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); Stat3 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); Stat2 = Stat2 << 16 | Stat3; CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", (void *)Stat1, (void *)Stat2); } #endif /* DEBUG */ if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) { /* * Workaround BCom Errata: * enable and disable loopback mode if "NO HCD" occurs. */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl); SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, (SK_U16)(Ctrl | PHY_CT_LOOP)); SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, (SK_U16)(Ctrl & ~PHY_CT_LOOP)); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("No HCD Link event, Port %d\n", Port)); #ifdef xDEBUG CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "No HCD link event, port %d.", (void *)Port, (void *)NULL); #endif /* DEBUG */ } /* Not obsolete: link status bit is latched to 0 and autoclearing! */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); if (pPrt->PHWLinkUp) { return(SK_HW_PS_NONE); } #ifdef xDEBUG { SK_U32 Stat1, Stat2, Stat3; Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "CheckUp1a - Stat: %x, Mask: %x", (void *)Isrc, (void *)Stat1); Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); Stat1 = Stat1 << 16 | PhyStat; Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); Stat3 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); Stat2 = Stat2 << 16 | Stat3; CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "Ctrl/Stat: %x, AN Adv/LP: %x", (void *)Stat1, (void *)Stat2); Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); Stat1 = Stat1 << 16 | Stat2; Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); Stat3 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); Stat2 = Stat2 << 16 | ResAb; CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", (void *)Stat1, (void *)Stat2); Stat1 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); Stat1 = Stat1 << 16 | Stat2; Stat2 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); Stat3 = 0; SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); Stat2 = Stat2 << 16 | Stat3; CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", (void *)Stat1, (void *)Stat2); } #endif /* DEBUG */ /* * Here we usually can check whether the link is in sync and * auto-negotiation is done. */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); if ((ResAb & PHY_B_1000S_MSF) != 0) { /* Error */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Master/Slave Fault port %d\n", Port)); pPrt->PAutoNegFail = SK_TRUE; pPrt->PMSStatus = SK_MS_STAT_FAULT; return(SK_HW_PS_RESTART); } if ((PhyStat & PHY_ST_LSYNC) == 0) { return(SK_HW_PS_NONE); } pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Port %d, ResAb: 0x%04X\n", Port, ResAb)); if (AutoNeg) { if ((PhyStat & PHY_ST_AN_OVER) != 0) { SkHWLinkUp(pAC, IoC, Port); Done = SkMacAutoNegDone(pAC, IoC, Port); if (Done != SK_AND_OK) { #ifdef DEBUG /* Get PHY parameters, for debugging only */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb); SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", Port, LpAb, ExtStat)); #endif /* DEBUG */ return(SK_HW_PS_RESTART); } else { #ifdef xDEBUG /* Dummy read ISR to prevent extra link downs/ups */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "CheckUp2 - Stat: %x", (void *)ExtStat, (void *)NULL); } #endif /* DEBUG */ return(SK_HW_PS_LINK); } } } else { /* !AutoNeg */ /* Link is up and we don't need more. */ #ifdef DEBUG if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("ERROR: Lipa auto detected on port %d\n", Port)); } #endif /* DEBUG */ #ifdef xDEBUG /* Dummy read ISR to prevent extra link downs/ups */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { CMSMPrintString( pAC->pConfigTable, MSG_TYPE_RUNTIME_INFO, "CheckUp3 - Stat: %x", (void *)ExtStat, (void *)NULL); } #endif /* DEBUG */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync(GP), Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); return(SK_HW_PS_LINK); } return(SK_HW_PS_NONE); } /* SkGePortCheckUpBcom */ #endif /* GENESIS */ #ifdef YUKON /****************************************************************************** * * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY * * return: * 0 o.k. nothing needed * 1 Restart needed on this port * 2 Link came up */ static int SkGePortCheckUpGmac( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port, /* Which port should be checked */ SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ int Done; SK_U16 PhyIsrc; /* PHY Interrupt source */ SK_U16 PhyStat; /* PPY Status */ SK_U16 PhySpecStat;/* PHY Specific Status */ SK_U16 ResAb; /* Master/Slave resolution */ SK_EVPARA Para; #ifdef DEBUG SK_U16 Word; /* I/O helper */ #endif /* DEBUG */ pPrt = &pAC->GIni.GP[Port]; if (pPrt->PHWLinkUp) { return(SK_HW_PS_NONE); } /* Read PHY Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); /* Read PHY Interrupt Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc); if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc)); } if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc)); } SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); if ((ResAb & PHY_B_1000S_MSF) != 0) { /* Error */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Master/Slave Fault port %d\n", Port)); pPrt->PAutoNegFail = SK_TRUE; pPrt->PMSStatus = SK_MS_STAT_FAULT; return(SK_HW_PS_RESTART); } /* Read PHY Specific Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat)); #ifdef DEBUG SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word); if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 || (PhySpecStat & PHY_M_PS_PAGE_REC) != 0) { /* Read PHY Next Page Link Partner */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Page Received, NextPage: 0x%04X\n", Word)); } #endif /* DEBUG */ if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) { return(SK_HW_PS_NONE); } if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 || (PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) { /* Downshift detected */ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG); Para.Para64 = Port; SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc)); } pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7); if (AutoNeg) { /* Auto-Negotiation Over ? */ if ((PhyStat & PHY_ST_AN_OVER) != 0) { SkHWLinkUp(pAC, IoC, Port); Done = SkMacAutoNegDone(pAC, IoC, Port); if (Done != SK_AND_OK) { return(SK_HW_PS_RESTART); } return(SK_HW_PS_LINK); } } else { /* !AutoNeg */ /* Link is up and we don't need more */ #ifdef DEBUG if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("ERROR: Lipa auto detected on port %d\n", Port)); } #endif /* DEBUG */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync, Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); return(SK_HW_PS_LINK); } return(SK_HW_PS_NONE); } /* SkGePortCheckUpGmac */ #endif /* YUKON */ #ifdef OTHER_PHY /****************************************************************************** * * SkGePortCheckUpLone() - Check if the link is up on Level One PHY * * return: * 0 o.k. nothing needed * 1 Restart needed on this port * 2 Link came up */ static int SkGePortCheckUpLone( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port, /* Which port should be checked */ SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ int Done; SK_U16 Isrc; /* Interrupt source register */ SK_U16 LpAb; /* Link Partner Ability */ SK_U16 ExtStat; /* Extended Status Register */ SK_U16 PhyStat; /* Phy Status Register */ SK_U16 StatSum; SK_U8 NextMode; /* Next AutoSensing Mode */ pPrt = &pAC->GIni.GP[Port]; if (pPrt->PHWLinkUp) { return(SK_HW_PS_NONE); } StatSum = pPrt->PIsave; pPrt->PIsave = 0; /* * here we usually can check whether the link is in sync and * auto-negotiation is done. */ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat); StatSum |= PhyStat; SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); if ((PhyStat & PHY_ST_LSYNC) == 0) { /* Save Auto-negotiation Done bit */ pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER); #ifdef DEBUG if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg done rescheduled Port %d\n", Port)); } #endif /* DEBUG */ return(SK_HW_PS_NONE); } if (AutoNeg) { if ((StatSum & PHY_ST_AN_OVER) != 0) { SkHWLinkUp(pAC, IoC, Port); Done = SkMacAutoNegDone(pAC, IoC, Port); if (Done != SK_AND_OK) { /* Get PHY parameters, for debugging only */ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb); SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", Port, LpAb, ExtStat)); /* Try next possible mode */ NextMode = SkHWSenseGetNext(pAC, IoC, Port); SkHWLinkDown(pAC, IoC, Port); if (Done == SK_AND_DUP_CAP) { /* GoTo next mode */ SkHWSenseSetNext(pAC, IoC, Port, NextMode); } return(SK_HW_PS_RESTART); } else { /* * Dummy Read interrupt status to prevent * extra link down/ups */ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); return(SK_HW_PS_LINK); } } /* AutoNeg not done, but HW link is up. Check for timeouts */ pPrt->PAutoNegTimeOut++; if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { /* Timeout occured */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("AutoNeg timeout Port %d\n", Port)); if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { /* Set Link manually up */ SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Set manual full duplex Port %d\n", Port)); } /* Do the restart */ return(SK_HW_PS_RESTART); } } else { /* Link is up and we don't need more */ #ifdef DEBUG if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("ERROR: Lipa auto detected on port %d\n", Port)); } #endif /* DEBUG */ /* * Dummy Read interrupt status to prevent * extra link down/ups */ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync(GP), Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); return(SK_HW_PS_LINK); } return(SK_HW_PS_NONE); } /* SkGePortCheckUpLone */ /****************************************************************************** * * SkGePortCheckUpNat() - Check if the link is up on National PHY * * return: * 0 o.k. nothing needed * 1 Restart needed on this port * 2 Link came up */ static int SkGePortCheckUpNat( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* IO Context */ int Port, /* Which port should be checked */ SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ { /* todo: National */ return(SK_HW_PS_NONE); } /* SkGePortCheckUpNat */ #endif /* OTHER_PHY */ /****************************************************************************** * * SkGeSirqEvent() - Event Service Routine * * Description: * * Notes: */ int SkGeSirqEvent( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* Io Context */ SK_U32 Event, /* Module specific Event */ SK_EVPARA Para) /* Event specific Parameter */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ SK_U32 Port; SK_U32 Val32; int PortStat; SK_U8 Val8; #ifdef GENESIS SK_U64 Octets; #endif /* GENESIS */ Port = Para.Para32[0]; pPrt = &pAC->GIni.GP[Port]; switch (Event) { case SK_HWEV_WATIM: if (pPrt->PState == SK_PRT_RESET) { PortStat = SK_HW_PS_NONE; } else { /* Check whether port came up */ PortStat = SkGePortCheckUp(pAC, IoC, (int)Port); } switch (PortStat) { case SK_HW_PS_RESTART: if (pPrt->PHWLinkUp) { /* Set Link to down */ SkHWLinkDown(pAC, IoC, (int)Port); /* * Signal directly to RLMT to ensure correct * sequence of SWITCH and RESET event. */ SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); } /* Restart needed */ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); break; case SK_HW_PS_LINK: /* Signal to RLMT */ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para); break; } /* Start again the check Timer */ if (pPrt->PHWLinkUp) { Val32 = SK_WA_ACT_TIME; } else { Val32 = SK_WA_INA_TIME; } /* Todo: still needed for non-XMAC PHYs??? */ /* Start workaround Errata #2 timer */ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32, SKGE_HWAC, SK_HWEV_WATIM, Para); break; case SK_HWEV_PORT_START: if (pPrt->PHWLinkUp) { /* * Signal directly to RLMT to ensure correct * sequence of SWITCH and RESET event. */ SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); } SkHWLinkDown(pAC, IoC, (int)Port); /* Schedule Port RESET */ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); /* Start workaround Errata #2 timer */ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, SKGE_HWAC, SK_HWEV_WATIM, Para); break; case SK_HWEV_PORT_STOP: if (pPrt->PHWLinkUp) { /* * Signal directly to RLMT to ensure correct * sequence of SWITCH and RESET event. */ SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); } /* Stop Workaround Timer */ SkTimerStop(pAC, IoC, &pPrt->PWaTimer); SkHWLinkDown(pAC, IoC, (int)Port); break; case SK_HWEV_UPDATE_STAT: /* We do NOT need to update any statistics */ break; case SK_HWEV_CLEAR_STAT: /* We do NOT need to clear any statistics */ for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) { pPrt->PPrevRx = 0; pPrt->PPrevFcs = 0; pPrt->PPrevShorts = 0; } break; case SK_HWEV_SET_LMODE: Val8 = (SK_U8)Para.Para32[1]; if (pPrt->PLinkModeConf != Val8) { /* Set New link mode */ pPrt->PLinkModeConf = Val8; /* Restart Port */ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); } break; case SK_HWEV_SET_FLOWMODE: Val8 = (SK_U8)Para.Para32[1]; if (pPrt->PFlowCtrlMode != Val8) { /* Set New Flow Control mode */ pPrt->PFlowCtrlMode = Val8; /* Restart Port */ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); } break; case SK_HWEV_SET_ROLE: /* not possible for fiber */ if (!pAC->GIni.GICopperType) { break; } Val8 = (SK_U8)Para.Para32[1]; if (pPrt->PMSMode != Val8) { /* Set New Role (Master/Slave) mode */ pPrt->PMSMode = Val8; /* Restart Port */ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); } break; case SK_HWEV_SET_SPEED: if (pPrt->PhyType != SK_PHY_MARV_COPPER) { break; } Val8 = (SK_U8)Para.Para32[1]; if (pPrt->PLinkSpeed != Val8) { /* Set New Speed parameter */ pPrt->PLinkSpeed = Val8; /* Restart Port */ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); } break; #ifdef GENESIS case SK_HWEV_HALFDUP_CHK: if (pAC->GIni.GIGenesis) { /* * half duplex hangup workaround. * See packet arbiter timeout interrupt for description */ pPrt->HalfDupTimerActive = SK_FALSE; if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) { #ifdef XXX Len = sizeof(SK_U64); SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets, &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, Port), pAC->Rlmt.Port[Port].Net->NetNumber); #endif /* XXX */ /* Snap statistic counters */ (void)SkXmUpdateStats(pAC, IoC, Port); (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32); Octets = (SK_U64)Val32 << 32; (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32); Octets += Val32; if (pPrt->LastOctets == Octets) { /* Tx hanging, a FIFO flush restarts it */ SkMacFlushTxFifo(pAC, IoC, Port); } } } break; #endif /* GENESIS */ default: SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG); break; } return(0); } /* SkGeSirqEvent */ #ifdef GENESIS /****************************************************************************** * * SkPhyIsrBcom() - PHY interrupt service routine * * Description: handles all interrupts from BCom PHY * * Returns: N/A */ static void SkPhyIsrBcom( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* Io Context */ int Port, /* Port Num = PHY Num */ SK_U16 IStatus) /* Interrupt Status */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ SK_EVPARA Para; pPrt = &pAC->GIni.GP[Port]; if ((IStatus & PHY_B_IS_PSE) != 0) { /* Incorrectable pair swap error */ SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022, SKERR_SIRQ_E022MSG); } if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) { SkHWLinkDown(pAC, IoC, Port); Para.Para32[0] = (SK_U32)Port; /* Signal to RLMT */ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); /* Start workaround Errata #2 timer */ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, SKGE_HWAC, SK_HWEV_WATIM, Para); } } /* SkPhyIsrBcom */ #endif /* GENESIS */ #ifdef YUKON /****************************************************************************** * * SkPhyIsrGmac() - PHY interrupt service routine * * Description: handles all interrupts from Marvell PHY * * Returns: N/A */ static void SkPhyIsrGmac( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* Io Context */ int Port, /* Port Num = PHY Num */ SK_U16 IStatus) /* Interrupt Status */ { SK_GEPORT *pPrt; /* GIni Port struct pointer */ SK_EVPARA Para; SK_U16 Word; pPrt = &pAC->GIni.GP[Port]; if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) { SkHWLinkDown(pAC, IoC, Port); SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg.Adv: 0x%04X\n", Word)); /* Set Auto-negotiation advertisement */ if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) { /* restore Asymmetric Pause bit */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, (SK_U16)(Word | PHY_M_AN_ASP)); } Para.Para32[0] = (SK_U32)Port; /* Signal to RLMT */ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } if ((IStatus & PHY_M_IS_AN_ERROR) != 0) { /* Auto-Negotiation Error */ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG); } if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) { /* FIFO Overflow/Underrun Error */ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG); } } /* SkPhyIsrGmac */ #endif /* YUKON */ #ifdef OTHER_PHY /****************************************************************************** * * SkPhyIsrLone() - PHY interrupt service routine * * Description: handles all interrupts from LONE PHY * * Returns: N/A */ static void SkPhyIsrLone( SK_AC *pAC, /* Adapter Context */ SK_IOC IoC, /* Io Context */ int Port, /* Port Num = PHY Num */ SK_U16 IStatus) /* Interrupt Status */ { SK_EVPARA Para; if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) { SkHWLinkDown(pAC, IoC, Port); Para.Para32[0] = (SK_U32)Port; /* Signal to RLMT */ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } } /* SkPhyIsrLone */ #endif /* OTHER_PHY */ /* End of File */