#
# Character device configuration
#
mainmenu_option next_comment
comment 'Character devices'

bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
   if [ "$CONFIG_GSC_LASI" = "y" ]; then
      bool '    Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2
   fi
fi
tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
if [ "$CONFIG_SERIAL" = "y" ]; then
   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
   if [ "$CONFIG_GSC_LASI" = "y" ]; then
      bool '   serial port on GSC support' CONFIG_SERIAL_GSC
   fi
   if [ "$CONFIG_IA64" = "y" ]; then
      bool '  Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP
   fi
   if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
      tristate '   Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL
      tristate '   Dual serial port support' CONFIG_DUALSP_SERIAL
   fi
fi
dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL
if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
   bool '  Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
   bool '  Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
   bool '  Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
   bool '  Support special multiport boards' CONFIG_SERIAL_MULTIPORT
   bool '  Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi
bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
   tristate '  Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
   tristate '  Comtrol Rocketport support' CONFIG_ROCKETPORT
   tristate '  Cyclades async mux support' CONFIG_CYCLADES
   if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
      bool '    Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
   fi
   if [ "$CONFIG_X86_64" != "y" ]; then
      tristate '  Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
      if [ "$CONFIG_DIGIEPCA" = "n" ]; then
         tristate '  Digiboard PC/Xx Support' CONFIG_DIGI
      fi
   fi
   dep_tristate '  Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA
   tristate '  Moxa Intellio support' CONFIG_MOXA_INTELLIO
   tristate '  Moxa SmartIO support' CONFIG_MOXA_SMARTIO
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      dep_tristate '  Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
   fi
   tristate '  Microgate SyncLink card support' CONFIG_SYNCLINK
   tristate '  SyncLink Multiport support' CONFIG_SYNCLINKMP
   tristate '  HDLC line discipline support' CONFIG_N_HDLC
   tristate '  SDL RISCom/8 card support' CONFIG_RISCOM8
   if [ "$CONFIG_X86_64" != "y" ]; then
      tristate '  Specialix IO8+ card support' CONFIG_SPECIALIX
      if [ "$CONFIG_SPECIALIX" != "n" ]; then
         bool '  Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
         bool '  Enable broken drivers for Specialix cards (may randomly crash)' CONFIG_SPECIALIX_BROKEN
      fi 
      dep_tristate '  Specialix SX (and SI) card support (broken)' CONFIG_SX $CONFIG_SPECIALIX_BROKEN
      dep_tristate '  Specialix RIO system support (broken)' CONFIG_RIO $CONFIG_SPECIALIX_BROKEN
      if [ "$CONFIG_RIO" != "n" ]; then
        bool '    Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
      fi
   fi
   bool '  Stallion multiport serial support' CONFIG_STALDRV
   if [ "$CONFIG_STALDRV" = "y" ]; then
     tristate '    Stallion EasyIO or EC8/32 support' CONFIG_STALLION
     tristate '    Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
   fi
   if [ "$CONFIG_PARISC" = "y" ]; then
     if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then
       bool '  Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD
     fi
     if [ "$CONFIG_SERIAL_MUX" != "y" ]; then
       bool '  PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD
     fi
   fi
   if [ "$CONFIG_MIPS" = "y" ]; then
      bool '  TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
      dep_bool '     Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
      bool '  TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9
      dep_bool '     Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9
      if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
	 bool '  Enable Au1x00 UART Support' CONFIG_AU1X00_UART
	 if [ "$CONFIG_AU1X00_UART" = "y" ]; then
	    bool '        Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE
         fi
         dep_tristate '  Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00
	    if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then
	       dep_tristate '  Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00
	    fi
	    if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \
	         "$CONFIG_AU1X00_USB_RAW" != "n" ]; then
		 define_bool CONFIG_AU1X00_USB_DEVICE y
	    fi
      fi
      bool '  TXx927 SIO support' CONFIG_TXX927_SERIAL 
      if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then
         bool '    TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE  
      fi                             
      if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
         bool '  Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART
         if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then
            bool '    Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE
            if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then
               define_bool CONFIG_SERIAL_CONSOLE y
            fi
         fi
      fi
   fi
   if [ "$CONFIG_DECSTATION" = "y" ]; then
      bool '  DECstation serial support' CONFIG_SERIAL_DEC
      dep_bool '    Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC
      dep_bool '    DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32
      dep_bool '    Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC
   fi
   if [ "$CONFIG_SGI_IP22" = "y" ]; then
      bool '  SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL
   fi
   if [ "$CONFIG_IA64" = "y" ]; then
      bool '  SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL
      if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then
	 bool '    SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE
      fi
      if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then
	 bool '  SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL
      fi
   fi
fi
if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
   bool '  Enable broken drivers for Commodore cards (may randomly crash)' CONFIG_A2232_BROKEN
   dep_tristate 'Commodore A2232 serial support (broken) (EXPERIMENTAL)' CONFIG_A2232 $CONFIG_A2232_BROKEN
fi
if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
   bool 'DC21285 serial port support' CONFIG_SERIAL_21285
   if [ "$CONFIG_SERIAL_21285" = "y" ]; then
      if [ "$CONFIG_OBSOLETE" = "y" ]; then
         bool '  Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
      fi
      bool '  Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
   fi
   if [ "$CONFIG_PARISC" = "y" ]; then
     bool '  PDC software console support' CONFIG_PDC_CONSOLE
   fi
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
     define_bool CONFIG_IT8172_CIR y
   else
     bool '    Enable PS2 Keyboard Support' CONFIG_PC_KEYB
   fi
   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
   bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
fi
if [ "$CONFIG_MIPS_IVR" = "y" ]; then
   bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
   if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
     define_bool CONFIG_IT8172_CIR y
   fi
   bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
fi
if [ "$CONFIG_CPU_VR41XX" = "y" ]; then
   bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
if [ "$CONFIG_PARPORT" != "n" ]; then
   dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
   if [ "$CONFIG_PRINTER" != "n" ]; then
      bool '  Support for console on line printer' CONFIG_LP_CONSOLE
   fi
   dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
   dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT
fi

if [ "$CONFIG_PPC64" = "y" ] ; then 
   bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
   tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
fi

source drivers/i2c/Config.in

mainmenu_option next_comment
comment 'Mice'
tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
if [ "$CONFIG_BUSMOUSE" != "n" ]; then
   dep_tristate '  ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
   dep_tristate '  Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
   dep_tristate '  Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
   if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
      dep_tristate '  Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
   fi
#   if [ "$CONFIG_DECSTATION" = "y" ]; then
#      dep_bool '  MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
#   fi
fi

tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
if [ "$CONFIG_MOUSE" != "n" ]; then
   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
   tristate '  C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
   tristate '  PC110 digitizer pad support' CONFIG_PC110_PAD
   tristate '  MK712 touch screen support' CONFIG_MK712_MOUSE
fi
endmenu

source drivers/char/joystick/Config.in

tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
   bool '  Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
   if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
      comment '  Edit configuration parameters in ./include/linux/tpqic02.h!'
   else
      comment '  Setting runtime QIC-02 configuration is done with qic02conf'
      comment '  from the tpqic02-support package.  It is available at'
      comment '  metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
   fi
fi

tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
dep_mbool '  Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
dep_tristate '  Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
dep_tristate '  IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
dep_tristate '  IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER

mainmenu_option next_comment
comment 'Watchdog Cards'
bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
   tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
   tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
   tristate '  ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
   tristate '  ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
   tristate '  AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
   tristate '  Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
   if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
      tristate '  DC21285 watchdog' CONFIG_21285_WATCHDOG
      if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
         tristate '  NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG
      fi
   fi
   tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
   tristate '  IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
   tristate '  ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
   tristate '  Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
   tristate '  Mixcom Watchdog' CONFIG_MIXCOMWD 
   tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
   dep_tristate '  SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
   tristate '  NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
   tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
   tristate '  WDT Watchdog timer' CONFIG_WDT
   tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI
   tristate '  W83627HF/F/HG/G Watchdog' CONFIG_WDT_W83627
   if [ "$CONFIG_WDT" != "n" ]; then
      bool '    WDT501 features' CONFIG_WDT_501
      if [ "$CONFIG_WDT_501" = "y" ]; then
         bool '      Fan Tachometer' CONFIG_WDT_501_FAN
      fi
   fi
   tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
   if [ "$CONFIG_SGI_IP22" = "y" ]; then
      dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
   fi
   if [ "$CONFIG_MGEODE_LX" = "y" ]; then
      tristate '  Geode GX/LX on-chip Watchdog timer' CONFIG_GEODE_WDT
   fi
   if [ "$CONFIG_8xx" = "y" ]; then
      tristate '  MPC8xx Watchdog Timer' CONFIG_8xx_WDT
   fi
fi
endmenu

if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
   tristate 'NetWinder thermometer support' CONFIG_DS1620
   tristate 'NetWinder Button' CONFIG_NWBUTTON
   if [ "$CONFIG_NWBUTTON" != "n" ]; then
      bool '  Reboot Using Button' CONFIG_NWBUTTON_REBOOT
   fi
   tristate 'NetWinder flash support' CONFIG_NWFLASH
fi
tristate 'NatSemi SCx200 Support' CONFIG_SCx200
dep_tristate '  NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200

if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
   bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
fi

if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
   dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
fi
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
   dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
fi
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
     "$CONFIG_X86_64" = "y" ]; then
   dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
fi
if [ "$CONFIG_X86" = "y" ]; then
   dep_tristate 'AMD Geode Random Number Generator support' CONFIG_GEODE_RNG $CONFIG_PCI
fi
dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
tristate '/dev/nvram support' CONFIG_NVRAM
tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
if [ "$CONFIG_IA64" = "y" ]; then
   bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
fi
if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
   bool 'Tadpole ANA H8 Support (OBSOLETE)'  CONFIG_H8
fi
if [ "$CONFIG_MIPS" = "y" -a "$CONFIG_NEW_TIME_C" = "y" ]; then
   tristate 'Generic MIPS RTC Support' CONFIG_MIPS_RTC
fi
if [ "$CONFIG_SGI_IP22" = "y" ]; then
   bool 'SGI DS1286 RTC support' CONFIG_SGI_DS1286
fi
if [ "$CONFIG_SGI_IP27" = "y" ]; then
   bool 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
fi
if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
   tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
fi

tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
tristate 'Siemens R3964 line discipline' CONFIG_R3964
tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
   dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
fi

mainmenu_option next_comment
comment 'Ftape, the floppy tape device driver'
tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
if [ "$CONFIG_FTAPE" != "n" ]; then
   source drivers/char/ftape/Config.in
fi

endmenu

if [ "$CONFIG_GART_IOMMU" = "y" ]; then
	bool '/dev/agpgart (AGP Support)' CONFIG_AGP
	define_bool CONFIG_AGP_AMD_K8 y
else
	tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
fi      
if [ "$CONFIG_AGP" != "n" ]; then
   bool '  Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
   bool '  Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
   bool '  VIA chipset support' CONFIG_AGP_VIA
   bool '  AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
   if [ "$CONFIG_GART_IOMMU" != "y" ]; then
      bool '  AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
   fi   
   bool '  Generic SiS support' CONFIG_AGP_SIS
   bool '  ALI chipset support' CONFIG_AGP_ALI
   bool '  Serverworks LE/HE support' CONFIG_AGP_SWORKS
   if [ "$CONFIG_X86" = "y" ]; then
      bool '  NVIDIA chipset support' CONFIG_AGP_NVIDIA
   fi
   if [ "$CONFIG_IA64" = "y" ]; then
      bool '  Intel 460GX support' CONFIG_AGP_I460
      bool '  HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
   fi
   bool '  ATI IGP chipset support' CONFIG_AGP_ATI
fi

mainmenu_option next_comment
comment 'Direct Rendering Manager (XFree86 DRI support)'
bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
if [ "$CONFIG_DRM" = "y" ]; then
   bool '  Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
   if [ "$CONFIG_DRM_OLD" = "y" ]; then
      comment 'DRM 4.0 drivers'
      source drivers/char/drm-4.0/Config.in
   else
      comment 'DRM 4.1 drivers'
      define_bool CONFIG_DRM_NEW y
      source drivers/char/drm/Config.in
   fi
fi
endmenu

if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
   source drivers/char/pcmcia/Config.in
fi
if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
   tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
   tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
  tristate ' ITE GPIO' CONFIG_ITE_GPIO
fi

if [ "$CONFIG_X86" = "y" ]; then
   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
   dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
fi

endmenu