/* * * Common time routines among all ppc machines. * * Written by Cort Dougan (cort@cs.nmt.edu) to merge * Paul Mackerras' version and mine for PReP and Pmac. * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net). * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com) * * First round of bugfixes by Gabriel Paubert (paubert@iram.es) * to make clock more stable (2.4.0-test5). The only thing * that this code assumes is that the timebases have been synchronized * by firmware on SMP and are never stopped (never do sleep * on SMP then, nap and doze are OK). * * Speeded up do_gettimeofday by getting rid of references to * xtime (which required locks for consistency). (mikejc@us.ibm.com) * * TODO (not necessarily in this file): * - improve precision and reproducibility of timebase frequency * measurement at boot time. (for iSeries, we calibrate the timebase * against the Titan chip's clock.) * - for astronomical applications: add a new function to get * non ambiguous timestamps even around leap seconds. This needs * a new timestamp format and a good name. * * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 * "A Kernel Model for Precision Timekeeping" by Dave Mills * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_PPC_ISERIES #include #endif #include #include #include void smp_local_timer_interrupt(struct pt_regs *); extern void setup_before_console_init(); /* keep track of when we need to update the rtc */ time_t last_rtc_update; extern rwlock_t xtime_lock; extern int piranha_simulator; #ifdef CONFIG_PPC_ISERIES unsigned long iSeries_recal_titan = 0; unsigned long iSeries_recal_tb = 0; static unsigned long first_settimeofday = 1; #endif #define XSEC_PER_SEC (1024*1024) #define USEC_PER_SEC (1000000) unsigned long tb_ticks_per_jiffy; unsigned long tb_ticks_per_usec; unsigned long tb_ticks_per_sec; unsigned long next_xtime_sync_tb; unsigned long xtime_sync_interval; unsigned long tb_to_xs; unsigned long processor_freq; spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED; extern unsigned long wall_jiffies; extern unsigned long lpEvent_count; extern int smp_tb_synchronized; extern unsigned long prof_cpu_mask; extern unsigned int * prof_buffer; extern unsigned long prof_len; extern unsigned long prof_shift; extern char _stext; extern struct timezone sys_tz; void ppc_adjtimex(void); static unsigned adjusting_time = 0; static void ppc_do_profile (unsigned long nip) { /* * Only measure the CPUs specified by /proc/irq/prof_cpu_mask. * (default is all CPUs.) */ if (!((1<>= prof_shift; /* * Don't ignore out-of-bounds EIP values silently, * put them into the last histogram slot, so if * present, they will show up as a sharp peak. */ if (nip > prof_len-1) nip = prof_len-1; atomic_inc((atomic_t *)&prof_buffer[nip]); } static __inline__ void timer_check_rtc(void) { /* * update the rtc when needed, this should be performed on the * right fraction of a second. Half or full second ? * Full second works on mk48t59 clocks, others need testing. * Note that this update is basically only used through * the adjtimex system calls. Setting the HW clock in * any other way is a /dev/rtc and userland business. * This is still wrong by -0.5/+1.5 jiffies because of the * timer interrupt resolution and possible delay, but here we * hit a quantization limit which can only be solved by higher * resolution timers and decoupling time management from timer * interrupts. This is also wrong on the clocks * which require being written at the half second boundary. * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ if ( (time_status & STA_UNSYNC) == 0 && xtime.tv_sec - last_rtc_update >= 659 && abs(xtime.tv_usec - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { struct rtc_time tm; to_tm(xtime.tv_sec+1, &tm); tm.tm_year -= 1900; tm.tm_mon -= 1; if (ppc_md.set_rtc_time(&tm) == 0) last_rtc_update = xtime.tv_sec+1; else /* Try again one minute later */ last_rtc_update += 60; } } /* Synchronize xtime with do_gettimeofday */ static __inline__ void timer_sync_xtime( unsigned long cur_tb ) { struct timeval my_tv; if ( cur_tb > next_xtime_sync_tb ) { next_xtime_sync_tb = cur_tb + xtime_sync_interval; do_gettimeofday( &my_tv ); if ( xtime.tv_sec <= my_tv.tv_sec ) { xtime.tv_sec = my_tv.tv_sec; xtime.tv_usec = my_tv.tv_usec; } } } #ifdef CONFIG_PPC_ISERIES /* * This function recalibrates the timebase based on the 49-bit time-of-day * value in the Titan chip. The Titan is much more accurate than the value * returned by the service processor for the timebase frequency. */ static void iSeries_tb_recal(void) { struct div_result divres; unsigned long titan, tb; tb = get_tb(); titan = HvCallXm_loadTod(); if ( iSeries_recal_titan ) { unsigned long tb_ticks = tb - iSeries_recal_tb; unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ; long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; char sign = '+'; /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ; if ( tick_diff < 0 ) { tick_diff = -tick_diff; sign = '-'; } if ( tick_diff ) { if ( tick_diff < tb_ticks_per_jiffy/25 ) { printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n", new_tb_ticks_per_jiffy, sign, tick_diff ); tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; tb_ticks_per_sec = new_tb_ticks_per_sec; div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; tb_to_xs = divres.result_low; systemcfg->tb_to_xs = tb_to_xs; } else { printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" " new tb_ticks_per_jiffy = %lu\n" " old tb_ticks_per_jiffy = %lu\n", new_tb_ticks_per_jiffy, tb_ticks_per_jiffy ); } } } iSeries_recal_titan = titan; iSeries_recal_tb = tb; } #endif /* * For iSeries shared processors, we have to let the hypervisor * set the hardware decrementer. We set a virtual decrementer * in the ItLpPaca and call the hypervisor if the virtual * decrementer is less than the current value in the hardware * decrementer. (almost always the new decrementer value will * be greater than the current hardware decementer so the hypervisor * call will not be needed) */ unsigned long tb_last_stamp=0; /* * timer_interrupt - gets called when the decrementer overflows, * with interrupts disabled. */ int timer_interrupt(struct pt_regs * regs) { int next_dec; unsigned long cur_tb; struct paca_struct *lpaca = get_paca(); unsigned long cpu = lpaca->xPacaIndex; struct ItLpQueue * lpq; irq_enter(cpu); if ((!user_mode(regs)) && (prof_buffer)) ppc_do_profile(instruction_pointer(regs)); pmc_timeslice_tick(); /* Hack this in for now */ lpaca->xLpPaca.xIntDword.xFields.xDecrInt = 0; while (lpaca->next_jiffy_update_tb <= (cur_tb = get_tb())) { #ifdef CONFIG_SMP smp_local_timer_interrupt(regs); #endif if (cpu == 0) { write_lock(&xtime_lock); tb_last_stamp = lpaca->next_jiffy_update_tb; do_timer(regs); timer_sync_xtime( cur_tb ); timer_check_rtc(); write_unlock(&xtime_lock); if ( adjusting_time && (time_adjust == 0) ) ppc_adjtimex(); } lpaca->next_jiffy_update_tb += tb_ticks_per_jiffy; } next_dec = lpaca->next_jiffy_update_tb - cur_tb; if (next_dec > lpaca->default_decr) next_dec = lpaca->default_decr; set_dec(next_dec); lpq = lpaca->lpQueuePtr; if (lpq && ItLpQueue_isLpIntPending(lpq)) lpEvent_count += ItLpQueue_process(lpq, regs); irq_exit(cpu); if (softirq_pending(cpu)) do_softirq(); return 1; } /* * This version of gettimeofday has microsecond resolution. */ void do_gettimeofday(struct timeval *tv) { unsigned long sec, usec, tb_ticks; unsigned long xsec, tb_xsec; unsigned long temp_tb_to_xs, temp_stamp_xsec; unsigned long tb_count_1, tb_count_2; unsigned long always_zero; struct systemcfg *gtdp; gtdp = systemcfg; /* * The following loop guarantees that we see a consistent view of the * tb_to_xs and stamp_xsec variables. These two variables can change * (eg. when xntpd adjusts the clock frequency) and an inconsistent * view (one variable changed, the other not) could result in a wildly * wrong result for do_gettimeofday. * * The code which updates these variables (ppc_adjtimex below) * increments tb_update_count, then updates the two variables and then * increments tb_update_count again. This code reads tb_update_count, * reads the two variables and then reads tb_update_count again. It * loops doing this until the two reads of tb_update_count yield the * same value and that value is even. This ensures a consistent view * of the two variables. * * The strange looking assembler code below causes the hardware to * think that reading the two variables is dependent on the first read * of tb_update_count and that the second reading of tb_update_count is * dependent on reading the two variables. This assures ordering * without the need for a lwsync, which is much more expensive. */ do { tb_ticks = get_tb() - gtdp->tb_orig_stamp; tb_count_1 = gtdp->tb_update_count; __asm__ __volatile__ ( " andc %0,%2,%2\n\ add %1,%3,%0\n\ " : "=&r"(always_zero), "=r"(gtdp) : "r"(tb_count_1), "r"(gtdp) ); temp_tb_to_xs = gtdp->tb_to_xs; temp_stamp_xsec = gtdp->stamp_xsec; __asm__ __volatile__ ( " add %0,%2,%3\n\ andc %0,%0,%0\n\ add %1,%4,%0\n\ " : "=&r"(always_zero), "=r"(gtdp) : "r"(temp_stamp_xsec), "r"(temp_tb_to_xs), "r"(gtdp) ); tb_count_2 = gtdp->tb_update_count; } while ( tb_count_2 - ( tb_count_1 & 0xfffffffffffffffe ) ); /* These calculations are faster (gets rid of divides) * if done in units of 1/2^20 rather than microseconds. * The conversion to microseconds at the end is done * without a divide (and in fact, without a multiply) */ tb_xsec = mulhdu( tb_ticks, temp_tb_to_xs ); xsec = temp_stamp_xsec + tb_xsec; sec = xsec / XSEC_PER_SEC; xsec -= sec * XSEC_PER_SEC; usec = (xsec * USEC_PER_SEC)/XSEC_PER_SEC; tv->tv_sec = sec; tv->tv_usec = usec; } void do_settimeofday(struct timeval *tv) { unsigned long flags; unsigned long delta_xsec; long int tb_delta, new_usec, new_sec; unsigned long new_xsec; write_lock_irqsave(&xtime_lock, flags); /* Updating the RTC is not the job of this code. If the time is * stepped under NTP, the RTC will be update after STA_UNSYNC * is cleared. Tool like clock/hwclock either copy the RTC * to the system time, in which case there is no point in writing * to the RTC again, or write to the RTC but then they don't call * settimeofday to perform this operation. */ #ifdef CONFIG_PPC_ISERIES if ( first_settimeofday ) { iSeries_tb_recal(); first_settimeofday = 0; } #endif tb_delta = tb_ticks_since(tb_last_stamp); tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; new_sec = tv->tv_sec; new_usec = tv->tv_usec - tb_delta / tb_ticks_per_usec; while (new_usec <0) { new_sec--; new_usec += USEC_PER_SEC; } xtime.tv_usec = new_usec; xtime.tv_sec = new_sec; /* In case of a large backwards jump in time with NTP, we want the * clock to be updated as soon as the PLL is again in lock. */ last_rtc_update = new_sec - 658; time_adjust = 0; /* stop active adjtime() */ time_status |= STA_UNSYNC; time_maxerror = NTP_PHASE_LIMIT; time_esterror = NTP_PHASE_LIMIT; delta_xsec = mulhdu( (tb_last_stamp-systemcfg->tb_orig_stamp), systemcfg->tb_to_xs ); new_xsec = (tv->tv_usec * XSEC_PER_SEC) / USEC_PER_SEC; new_xsec += tv->tv_sec * XSEC_PER_SEC; if ( new_xsec > delta_xsec ) { systemcfg->stamp_xsec = new_xsec - delta_xsec; } else { /* This is only for the case where the user is setting the time * way back to a time such that the boot time would have been * before 1970 ... eg. we booted ten days ago, and we are * setting the time to Jan 5, 1970 */ systemcfg->stamp_xsec = new_xsec; systemcfg->tb_orig_stamp = tb_last_stamp; } systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; systemcfg->tz_dsttime = sys_tz.tz_dsttime; write_unlock_irqrestore(&xtime_lock, flags); } /* * This function is a copy of the architecture independent function * but which calls do_settimeofday rather than setting the xtime * fields itself. This way, the fields which are used for * do_settimeofday get updated too. */ long ppc64_sys32_stime(int* tptr) { int value; struct timeval myTimeval; if (!capable(CAP_SYS_TIME)) return -EPERM; if (get_user(value, tptr)) return -EFAULT; myTimeval.tv_sec = value; myTimeval.tv_usec = 0; do_settimeofday(&myTimeval); return 0; } /* * This function is a copy of the architecture independent function * but which calls do_settimeofday rather than setting the xtime * fields itself. This way, the fields which are used for * do_settimeofday get updated too. */ long ppc64_sys_stime(long* tptr) { long value; struct timeval myTimeval; if (!capable(CAP_SYS_TIME)) return -EPERM; if (get_user(value, tptr)) return -EFAULT; myTimeval.tv_sec = value; myTimeval.tv_usec = 0; do_settimeofday(&myTimeval); return 0; } void __init time_init(void) { /* This function is only called on the boot processor */ unsigned long flags; struct rtc_time tm; ppc_md.calibrate_decr(); if ( ! piranha_simulator ) { ppc_md.get_boot_time(&tm); } write_lock_irqsave(&xtime_lock, flags); xtime.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); tb_last_stamp = get_tb(); systemcfg->tb_orig_stamp = tb_last_stamp; systemcfg->tb_update_count = 0; systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; systemcfg->tb_to_xs = tb_to_xs; xtime_sync_interval = tb_ticks_per_sec - (tb_ticks_per_sec/8); next_xtime_sync_tb = tb_last_stamp + xtime_sync_interval; time_freq = 0; xtime.tv_usec = 0; last_rtc_update = xtime.tv_sec; write_unlock_irqrestore(&xtime_lock, flags); /* Not exact, but the timer interrupt takes care of this */ set_dec(tb_ticks_per_jiffy); /* This horrible hack gives setup a hook just before console_init */ setup_before_console_init(); } /* * After adjtimex is called, adjust the conversion of tb ticks * to microseconds to keep do_gettimeofday synchronized * with ntpd. * * Use the time_adjust, time_freq and time_offset computed by adjtimex to * adjust the frequency. */ /* #define DEBUG_PPC_ADJTIMEX 1 */ void ppc_adjtimex(void) { unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, new_tb_to_xs, new_xsec, new_stamp_xsec; unsigned long tb_ticks_per_sec_delta; long delta_freq, ltemp; struct div_result divres; unsigned long flags; long singleshot_ppm = 0; /* Compute parts per million frequency adjustment to accomplish the time adjustment implied by time_offset to be applied over the elapsed time indicated by time_constant. Use SHIFT_USEC to get it into the same units as time_freq. */ if ( time_offset < 0 ) { ltemp = -time_offset; ltemp <<= SHIFT_USEC - SHIFT_UPDATE; ltemp >>= SHIFT_KG + time_constant; ltemp = -ltemp; } else { ltemp = time_offset; ltemp <<= SHIFT_USEC - SHIFT_UPDATE; ltemp >>= SHIFT_KG + time_constant; } /* If there is a single shot time adjustment in progress */ if ( time_adjust ) { #ifdef DEBUG_PPC_ADJTIMEX printk("ppc_adjtimex: "); if ( adjusting_time == 0 ) printk("starting "); printk("single shot time_adjust = %ld\n", time_adjust); #endif adjusting_time = 1; /* Compute parts per million frequency adjustment to match time_adjust */ singleshot_ppm = tickadj * HZ; /* * The adjustment should be tickadj*HZ to match the code in * linux/kernel/timer.c, but experiments show that this is too * large. 3/4 of tickadj*HZ seems about right */ singleshot_ppm -= singleshot_ppm / 4; /* Use SHIFT_USEC to get it into the same units as time_freq */ singleshot_ppm <<= SHIFT_USEC; if ( time_adjust < 0 ) singleshot_ppm = -singleshot_ppm; } else { #ifdef DEBUG_PPC_ADJTIMEX if ( adjusting_time ) printk("ppc_adjtimex: ending single shot time_adjust\n"); #endif adjusting_time = 0; } /* Add up all of the frequency adjustments */ delta_freq = time_freq + ltemp + singleshot_ppm; /* Compute a new value for tb_ticks_per_sec based on the frequency adjustment */ den = 1000000 * (1 << (SHIFT_USEC - 8)); if ( delta_freq < 0 ) { tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den; new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta; } else { tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den; new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta; } #ifdef DEBUG_PPC_ADJTIMEX printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm); printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec); #endif /* * Compute a new value of tb_to_xs (used to convert tb to microseconds * and a new value of stamp_xsec which is the time (in 1/2^20 second * units) corresponding to tb_orig_stamp. This new value of stamp_xsec * compensates for the change in frequency (implied by the new * tb_to_xs) and so guarantees that the current time remains the same * */ tb_ticks = get_tb() - systemcfg->tb_orig_stamp; div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres ); new_tb_to_xs = divres.result_low; new_xsec = mulhdu( tb_ticks, new_tb_to_xs ); write_lock_irqsave( &xtime_lock, flags ); old_xsec = mulhdu( tb_ticks, systemcfg->tb_to_xs ); new_stamp_xsec = systemcfg->stamp_xsec + old_xsec - new_xsec; /* * tb_update_count is used to allow the problem state gettimeofday code * to assure itself that it sees a consistent view of the tb_to_xs and * stamp_xsec variables. It reads the tb_update_count, then reads * tb_to_xs and stamp_xsec and then reads tb_update_count again. If * the two values of tb_update_count match and are even then the * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. */ ++(systemcfg->tb_update_count); wmb(); systemcfg->tb_to_xs = new_tb_to_xs; systemcfg->stamp_xsec = new_stamp_xsec; wmb(); ++(systemcfg->tb_update_count); write_unlock_irqrestore( &xtime_lock, flags ); } #define TICK_SIZE tick #define FEBRUARY 2 #define STARTOFTIME 1970 #define SECDAY 86400L #define SECYR (SECDAY * 365) #define leapyear(year) ((year) % 4 == 0) #define days_in_year(a) (leapyear(a) ? 366 : 365) #define days_in_month(a) (month_days[(a) - 1]) static int month_days[12] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; /* * This only works for the Gregorian calendar - i.e. after 1752 (in the UK) */ void GregorianDay(struct rtc_time * tm) { int leapsToDate; int lastYear; int day; int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; lastYear=tm->tm_year-1; /* * Number of leap corrections to apply up to end of last year */ leapsToDate = lastYear/4 - lastYear/100 + lastYear/400; /* * This year is a leap year if it is divisible by 4 except when it is * divisible by 100 unless it is divisible by 400 * * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 will be */ if((tm->tm_year%4==0) && ((tm->tm_year%100!=0) || (tm->tm_year%400==0)) && (tm->tm_mon>2)) { /* * We are past Feb. 29 in a leap year */ day=1; } else { day=0; } day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + tm->tm_mday; tm->tm_wday=day%7; } void to_tm(int tim, struct rtc_time * tm) { register int i; register long hms, day; day = tim / SECDAY; hms = tim % SECDAY; /* Hours, minutes, seconds are easy */ tm->tm_hour = hms / 3600; tm->tm_min = (hms % 3600) / 60; tm->tm_sec = (hms % 3600) % 60; /* Number of years in days */ for (i = STARTOFTIME; day >= days_in_year(i); i++) day -= days_in_year(i); tm->tm_year = i; /* Number of months in days left */ if (leapyear(tm->tm_year)) days_in_month(FEBRUARY) = 29; for (i = 1; day >= days_in_month(i); i++) day -= days_in_month(i); days_in_month(FEBRUARY) = 28; tm->tm_mon = i; /* Days are what is left over (+1) from all that. */ tm->tm_mday = day + 1; /* * Determine the day of week */ GregorianDay(tm); } #if 0 /* Auxiliary function to compute scaling factors */ /* Actually the choice of a timebase running at 1/4 the of the bus * frequency giving resolution of a few tens of nanoseconds is quite nice. * It makes this computation very precise (27-28 bits typically) which * is optimistic considering the stability of most processor clock * oscillators and the precision with which the timebase frequency * is measured but does not harm. */ unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) { unsigned mlt=0, tmp, err; /* No concern for performance, it's done once: use a stupid * but safe and compact method to find the multiplier. */ for (tmp = 1U<<31; tmp != 0; tmp >>= 1) { if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp; } /* We might still be off by 1 for the best approximation. * A side effect of this is that if outscale is too large * the returned value will be zero. * Many corner cases have been checked and seem to work, * some might have been forgotten in the test however. */ err = inscale*(mlt+1); if (err <= inscale/2) mlt++; return mlt; } #endif /* * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit * result. */ void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, unsigned divisor, struct div_result *dr ) { unsigned long a,b,c,d, w,x,y,z, ra,rb,rc; a = dividend_high >> 32; b = dividend_high & 0xffffffff; c = dividend_low >> 32; d = dividend_low & 0xffffffff; w = a/divisor; ra = (a - (w * divisor)) << 32; x = (ra + b)/divisor; rb = ((ra + b) - (x * divisor)) << 32; y = (rb + c)/divisor; rc = ((rb + b) - (y * divisor)) << 32; z = (rc + d)/divisor; dr->result_high = (w << 32) + x; dr->result_low = (y << 32) + z; }