/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include #include #include #include #include #include #include #include /* * Max #PCI busses we can handle; ie, max #PCI bridges. */ #define MAX_PCI_BUSSES 40 /* * Max #PCI devices (like scsi controllers) we handle on a bus. */ #define MAX_DEVICES_PER_PCIBUS 8 /* * No locking needed until PCI initialization is done parallely. */ int irqstore[MAX_PCI_BUSSES][MAX_DEVICES_PER_PCIBUS]; int lastirq = BASE_PCI_IRQ; /* * Translate from irq to software PCI bus number and PCI slot. */ int irq_to_bus[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; /* * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is * not really documented, so right now I can't write code which uses it. * Therefore we use type 0 accesses for now even though they won't work * correcly for PCI-to-PCI bridges. */ #define CF0_READ_PCI_CFG(dev,where,value,bm,mask) \ do { \ bridge_t *bridge; \ int slot = PCI_SLOT(dev->devfn); \ int fn = PCI_FUNC(dev->devfn); \ volatile u32 *addr; \ u32 cf, __bit; \ unsigned int bus_id = (unsigned) dev->bus->number; \ \ bridge = (bridge_t *) NODE_SWIN_BASE(bus_to_nid[bus_id], \ bus_to_wid[bus_id]); \ \ if (dev->vendor == PCI_VENDOR_ID_SGI \ && dev->device == PCI_DEVICE_ID_SGI_IOC3 \ && ((where >= 0x14 && where < 0x40) || (where >= 0x48))) { \ *value = 0; \ return PCIBIOS_SUCCESSFUL; \ } \ \ __bit = (((where) & (bm)) << 3); \ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; \ if (get_dbe(cf, addr)) \ return PCIBIOS_DEVICE_NOT_FOUND; \ *value = (cf >> __bit) & (mask); \ return PCIBIOS_SUCCESSFUL; \ } while (0) static int pci_conf0_read_config_byte(struct pci_dev *dev, int where, u8 *value) { CF0_READ_PCI_CFG(dev,where,value,3,0xff); } static int pci_conf0_read_config_word(struct pci_dev *dev, int where, u16 *value) { CF0_READ_PCI_CFG(dev,where,value,2,0xffff); } static int pci_conf0_read_config_dword(struct pci_dev *dev, int where, u32 *value) { CF0_READ_PCI_CFG(dev,where,value,0,0xffffffff); } #define CF0_WRITE_PCI_CFG(dev,where,value,bm,mask) \ do { \ bridge_t *bridge; \ int slot = PCI_SLOT(dev->devfn); \ int fn = PCI_FUNC(dev->devfn); \ volatile u32 *addr; \ u32 cf, __bit; \ unsigned int bus_id = (unsigned) dev->bus->number; \ \ bridge = (bridge_t *) NODE_SWIN_BASE(bus_to_nid[bus_id], \ bus_to_wid[bus_id]); \ \ if (dev->vendor == PCI_VENDOR_ID_SGI \ && dev->device == PCI_DEVICE_ID_SGI_IOC3 \ && ((where >= 0x14 && where < 0x40) || (where >= 0x48))) \ return PCIBIOS_SUCCESSFUL; \ \ __bit = (((where) & (bm)) << 3); \ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; \ if (get_dbe(cf, addr)) \ return PCIBIOS_DEVICE_NOT_FOUND; \ cf &= (~mask); \ cf |= (value); \ put_dbe(cf, addr); \ return PCIBIOS_SUCCESSFUL; \ } while (0) static int pci_conf0_write_config_byte(struct pci_dev *dev, int where, u8 value) { CF0_WRITE_PCI_CFG(dev,where,value,3,0xff); } static int pci_conf0_write_config_word(struct pci_dev *dev, int where, u16 value) { CF0_WRITE_PCI_CFG(dev,where,value,2,0xffff); } static int pci_conf0_write_config_dword(struct pci_dev *dev, int where, u32 value) { CF0_WRITE_PCI_CFG(dev,where,value,0,0xffffffff); } static struct pci_ops bridge_pci_ops = { pci_conf0_read_config_byte, pci_conf0_read_config_word, pci_conf0_read_config_dword, pci_conf0_write_config_byte, pci_conf0_write_config_word, pci_conf0_write_config_dword }; void __init pcibios_init(void) { struct pci_ops *ops = &bridge_pci_ops; int i; ioport_resource.end = ~0UL; iomem_resource.end = ~0UL; for (i=0; ibus->self) { /* Move up the chain of bridges. */ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); dev = dev->bus->self; } *pinp = pin; return PCI_SLOT(dev->devfn); } /* * All observed requests have pin == 1. We could have a global here, that * gets incremented and returned every time - unfortunately, pci_map_irq * may be called on the same device over and over, and need to return the * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. * * A given PCI device, in general, should be able to intr any of the cpus * on any one of the hubs connected to its xbow. */ static int __devinit pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { if ((dev->bus->number >= MAX_PCI_BUSSES) || (pin != 1) || (slot >= MAX_DEVICES_PER_PCIBUS)) panic("Increase supported PCI busses %d,%d,%d", dev->bus->number, slot, pin); /* * Already assigned? Then return previously assigned value ... */ if (irqstore[dev->bus->number][slot]) return irqstore[dev->bus->number][slot]; irq_to_bus[lastirq] = dev->bus->number; irq_to_slot[lastirq] = slot; irqstore[dev->bus->number][slot] = lastirq; lastirq++; return lastirq - 1; } void __init pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } void __devinit pcibios_fixup_bus(struct pci_bus *b) { pci_fixup_irqs(pci_swizzle, pci_map_irq); } void __init pcibios_fixup_pbus_ranges(struct pci_bus * bus, struct pbus_set_ranges_data * ranges) { ranges->io_start -= bus->resource[0]->start; ranges->io_end -= bus->resource[0]->start; ranges->mem_start -= bus->resource[1]->start; ranges->mem_end -= bus->resource[1]->start; } unsigned int pcibios_assign_all_busses(void) { return 0; } /* * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses * to find the slot number in sense of the bridge device register. * XXX This also means multiple devices might rely on conflicting bridge * settings. */ static void __init pci_disable_swapping(struct pci_dev *dev) { unsigned int bus_id = (unsigned) dev->bus->number; bridge_t *bridge = (bridge_t *) NODE_SWIN_BASE(bus_to_nid[bus_id], bus_to_wid[bus_id]); int slot = PCI_SLOT(dev->devfn); /* Turn off byte swapping */ bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR; bridge->b_widget.w_tflush; /* Flush */ } static void __init pci_enable_swapping(struct pci_dev *dev) { unsigned int bus_id = (unsigned) dev->bus->number; bridge_t *bridge = (bridge_t *) NODE_SWIN_BASE(bus_to_nid[bus_id], bus_to_wid[bus_id]); int slot = PCI_SLOT(dev->devfn); /* Turn on byte swapping */ bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; bridge->b_widget.w_tflush; /* Flush */ } static void __init pci_fixup_ioc3(struct pci_dev *d) { unsigned long bus_id = (unsigned) d->bus->number; printk("PCI: Fixing base addresses for IOC3 device %s\n", d->slot_name); d->resource[0].start |= NODE_OFFSET(bus_to_nid[bus_id]); d->resource[0].end |= NODE_OFFSET(bus_to_nid[bus_id]); pci_disable_swapping(d); } static void __init pci_fixup_isp1020(struct pci_dev *d) { unsigned short command; d->resource[0].start |= ((unsigned long)(bus_to_nid[d->bus->number])<<32); printk("PCI: Fixing isp1020 in [bus:slot.fn] %s\n", d->slot_name); /* * Configure device to allow bus mastering, i/o and memory mapping. * Older qlogicisp driver expects to have the IO space enable * bit set. Things stop working if we program the controllers as not * having PCI_COMMAND_MEMORY, so we have to fudge the mem_flags. */ pci_set_master(d); pci_read_config_word(d, PCI_COMMAND, &command); command |= PCI_COMMAND_MEMORY; command |= PCI_COMMAND_IO; pci_write_config_word(d, PCI_COMMAND, command); d->resource[1].flags |= 1; pci_enable_swapping(d); } static void __init pci_fixup_isp2x00(struct pci_dev *d) { unsigned int bus_id = (unsigned) d->bus->number; bridge_t *bridge = (bridge_t *) NODE_SWIN_BASE(bus_to_nid[bus_id], bus_to_wid[bus_id]); bridgereg_t devreg; int i; int slot = PCI_SLOT(d->devfn); unsigned int start; unsigned short command; printk("PCI: Fixing isp2x00 in [bus:slot.fn] %s\n", d->slot_name); /* set the resource struct for this device */ start = (u32) (u64)bridge; /* yes, we want to lose the upper 32 bits here */ start |= BRIDGE_DEVIO(slot); d->resource[0].start = start; d->resource[0].end = d->resource[0].start + 0xff; d->resource[0].flags = IORESOURCE_IO; d->resource[1].start = start; d->resource[1].end = d->resource[0].start + 0xfff; d->resource[1].flags = IORESOURCE_MEM; /* * set the bridge device(x) reg for this device */ devreg = bridge->b_device[slot].reg; /* point device(x) to it appropriate small window */ devreg &= ~BRIDGE_DEV_OFF_MASK; devreg |= (start >> 20) & BRIDGE_DEV_OFF_MASK; bridge->b_device[slot].reg = devreg; pci_enable_swapping(d); /* set card's base addr reg */ //pci_conf0_write_config_dword(d, PCI_BASE_ADDRESS_0, 0x500001); //pci_conf0_write_config_dword(d, PCI_BASE_ADDRESS_1, 0x8b00000); //pci_conf0_write_config_dword(d, PCI_ROM_ADDRESS, 0x8b20000); /* I got these from booting irix on system...*/ pci_conf0_write_config_dword(d, PCI_BASE_ADDRESS_0, 0x200001); //pci_conf0_write_config_dword(d, PCI_BASE_ADDRESS_1, 0xf800000); pci_conf0_write_config_dword(d, PCI_ROM_ADDRESS, 0x10200000); pci_conf0_write_config_dword(d, PCI_BASE_ADDRESS_1, start); //pci_conf0_write_config_dword(d, PCI_ROM_ADDRESS, (start | 0x20000)); /* set cache line size */ pci_conf0_write_config_dword(d, PCI_CACHE_LINE_SIZE, 0xf080); /* set pci bus timeout */ bridge->b_bus_timeout |= BRIDGE_BUS_PCI_RETRY_HLD(0x3); bridge->b_wid_tflush; printk("PCI: bridge bus timeout= 0x%x \n", bridge->b_bus_timeout); /* set host error field */ bridge->b_int_host_err = 0x44; bridge->b_wid_tflush; bridge->b_wid_tflush; /* wait until Bridge PIO complete */ for (i=0; i<8; i++) printk("PCI: device(%d)= 0x%x\n",i,bridge->b_device[i].reg); /* configure device to allow bus mastering, i/o and memory mapping */ pci_set_master(d); pci_read_config_word(d, PCI_COMMAND, &command); command |= PCI_COMMAND_MEMORY; command |= PCI_COMMAND_IO; pci_write_config_word(d, PCI_COMMAND, command); /*d->resource[1].flags |= 1;*/ } struct pci_fixup pcibios_fixups[] = { { PCI_FIXUP_HEADER, PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, pci_fixup_ioc3 }, { PCI_FIXUP_HEADER, PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020, pci_fixup_isp1020 }, { PCI_FIXUP_HEADER, PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100, pci_fixup_isp2x00 }, { PCI_FIXUP_HEADER, PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200, pci_fixup_isp2x00 }, { 0 } };