#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#

define_bool CONFIG_UID16 y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n

mainmenu_name "Linux/68k Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Platform dependent setup'

define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_PCMCIA n

bool 'Amiga support' CONFIG_AMIGA
bool 'Atari support' CONFIG_ATARI
dep_bool '  Hades support' CONFIG_HADES $CONFIG_ATARI
if [ "$CONFIG_HADES" = "y" ]; then
   define_bool CONFIG_PCI y
else
   define_bool CONFIG_PCI n
fi  
bool 'Macintosh support' CONFIG_MAC
if [ "$CONFIG_MAC" = "y" ]; then
   define_bool CONFIG_NUBUS y
   define_bool CONFIG_M68K_L2_CACHE y
fi
bool 'Apollo support' CONFIG_APOLLO
bool 'VME (Motorola and BVM) support' CONFIG_VME
if [ "$CONFIG_VME" = "y" ]; then
   bool '  Enable broken VME drivers (may randomly crash)' CONFIG_VME_BROKEN
   dep_bool '  MVME147 support (broken)' CONFIG_MVME147 $CONFIG_VME_BROKEN
   dep_bool '  MVME162, 166 and 167 support (broken)' CONFIG_MVME16x $CONFIG_VME_BROKEN
   dep_bool '  BVME4000 and BVME6000 support (broken)' CONFIG_BVME6000 $CONFIG_VME_BROKEN
fi
bool 'HP9000/300 support' CONFIG_HP300
if [ "$CONFIG_HP300" = "y" ]; then
   bool '  DIO bus support' CONFIG_DIO
fi
bool 'Sun3x support' CONFIG_SUN3X
bool 'Sun3 support' CONFIG_SUN3
  
bool 'Q40/Q60 support' CONFIG_Q40

comment 'Processor type'
bool '68020 support' CONFIG_M68020
bool '68030 support' CONFIG_M68030
bool '68040 support' CONFIG_M68040
bool '68060 support' CONFIG_M68060
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Math emulation support (EXPERIMENTAL)' CONFIG_M68KFPU_EMU
   if [ "$CONFIG_M68KFPU_EMU" = "y" ]; then
      bool '  Math emulation extra precision' CONFIG_M68KFPU_EMU_EXTRAPREC
      bool '  Math emulation only kernel' CONFIG_M68KFPU_EMU_ONLY
   fi
fi
bool 'Advanced configuration options' CONFIG_ADVANCED
if [ "$CONFIG_ADVANCED" = "y" ]; then
   bool 'Use read-modify-write instructions' CONFIG_RMW_INSNS
   if [ "$CONFIG_SUN3" = "y" ]; then
      define_bool CONFIG_SINGLE_MEMORY_CHUNK n
   else
      bool 'Use one physical chunk of memory only' CONFIG_SINGLE_MEMORY_CHUNK
   fi
   if [ "$CONFIG_M68060" = "y" ]; then
      bool 'Use write-through caching for 68060 supervisor accesses' CONFIG_060_WRITETHROUGH
   fi
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
if [ "$CONFIG_PROC_FS" = "y" ]; then
   choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
fi
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

if [ "$CONFIG_AMIGA" = "y" ]; then
  bool 'Amiga Zorro (AutoConfig) bus support' CONFIG_ZORRO
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
     bool 'Amiga 1200/600 PCMCIA support (EXPERIMENTAL)' CONFIG_AMIGA_PCMCIA
  fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   bool 'Support for ST-RAM as swap space' CONFIG_STRAM_SWAP
   bool 'ST-RAM statistics in /proc' CONFIG_STRAM_PROC
fi
if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_APOLLO" = "y" -o \
     "$CONFIG_ATARI" = "y" -o "$CONFIG_MAC" = "y" -o \
     "$CONFIG_Q40" = "y" ]; then
   bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
else
  if [ "$CONFIG_HP300" = "y" ]; then
     # We have a dedicated heartbeat LED. :-)
     define_bool CONFIG_HEARTBEAT y
  fi
fi
bool '/proc/hardware support' CONFIG_PROC_HARDWARE

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   tristate 'Parallel port support (EXPERIMENTAL)' CONFIG_PARPORT
   if [ "$CONFIG_PARPORT" != "n" ]; then
      if [ "$CONFIG_AMIGA" != "n" ]; then
         dep_tristate '  Amiga builtin port' CONFIG_PARPORT_AMIGA $CONFIG_PARPORT
	 if [ "$CONFIG_ZORRO" != "n" ]; then
            dep_tristate '  Multiface III parallel port' CONFIG_PARPORT_MFC3 $CONFIG_PARPORT
	 fi
      fi
      if [ "$CONFIG_Q40" != "n" ]; then
	 if [ "$CONFIG_PARPORT" != "n" ]; then
	    define_bool CONFIG_PARPORT_PC y
	 fi
      fi
   fi
   if [ "$CONFIG_ATARI" = "y" ]; then
      dep_tristate '  Atari builtin port' CONFIG_PARPORT_ATARI $CONFIG_PARPORT
   fi
   dep_tristate '  Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
   if [ "$CONFIG_PRINTER" != "n" ]; then
      bool '    IEEE 1284 transfer modes' CONFIG_PARPORT_1284
   fi
fi

if [ "$CONFIG_Q40" = "y" -o "$CONFIG_AMIGA_PCMCIA" = "y" \
      -o "$CONFIG_GG2" = "y" ]; then
   define_bool CONFIG_ISA y
else
   define_bool CONFIG_ISA n
fi

source drivers/pci/Config.in
source drivers/zorro/Config.in

if [ "$CONFIG_Q40" = "y" ]; then
   source drivers/pnp/Config.in
fi

endmenu

source drivers/mtd/Config.in

source drivers/block/Config.in

source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

if [ "$CONFIG_MAC" = "y" ]; then
   source drivers/input/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then

   comment 'SCSI support type (disk, tape, CD-ROM)'

   dep_tristate '  SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
   if [ "$CONFIG_BLK_DEV_SD" != "n" ]; then
      int  'Maximum number of SCSI disks that can be loaded as modules' CONFIG_SD_EXTRA_DEVS 40
   fi
   dep_tristate '  SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
   if [ "$CONFIG_CHR_DEV_ST" != "n" ]; then
      int  'Maximum number of SCSI tapes that can be loaded as modules' CONFIG_ST_EXTRA_DEVS 2
   fi
   dep_tristate '  SCSI CD-ROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
   if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
      bool '    Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
      int  'Maximum number of CDROM devices that can be loaded as modules' CONFIG_SR_EXTRA_DEVS 2
   fi
   dep_tristate '  SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

   comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

   bool '  Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

   bool '  Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
   bool '  SCSI logging facility' CONFIG_SCSI_LOGGING

   mainmenu_option next_comment
   comment 'SCSI low-level drivers'

   if [ "$CONFIG_AMIGA" = "y" ]; then
      dep_tristate 'A3000 WD33C93A support' CONFIG_A3000_SCSI $CONFIG_SCSI
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 bool 'Amiga NCR53c710 SCSI support (EXPERIMENTAL)' CONFIG_SCSI_AMIGA7XX
      fi
   fi
   if [ "$CONFIG_ZORRO" = "y" ]; then
      dep_tristate 'A2091 WD33C93A support' CONFIG_A2091_SCSI $CONFIG_SCSI
      dep_tristate 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI $CONFIG_SCSI
      dep_tristate 'CyberStorm SCSI support' CONFIG_CYBERSTORM_SCSI $CONFIG_SCSI
      dep_tristate 'CyberStorm Mk II SCSI support' CONFIG_CYBERSTORMII_SCSI $CONFIG_SCSI
      dep_tristate 'Blizzard 2060 SCSI support' CONFIG_BLZ2060_SCSI $CONFIG_SCSI
      dep_tristate 'Blizzard 1230IV/1260 SCSI support' CONFIG_BLZ1230_SCSI $CONFIG_SCSI
      dep_tristate 'Fastlane SCSI support' CONFIG_FASTLANE_SCSI $CONFIG_SCSI
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 dep_tristate 'BSC Oktagon SCSI support (EXPERIMENTAL)' CONFIG_OKTAGON_SCSI $CONFIG_SCSI
#	 bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
      fi
   fi
   if [ "$CONFIG_ATARI" = "y" ]; then
      dep_tristate 'Atari native SCSI support' CONFIG_ATARI_SCSI $CONFIG_SCSI
      if [ "$CONFIG_ATARI_SCSI" != "n" ]; then
	 bool '  Long delays for Toshiba CD-ROMs' CONFIG_ATARI_SCSI_TOSHIBA_DELAY
	 bool '  Reset SCSI-devices at boottime' CONFIG_ATARI_SCSI_RESET_BOOT
	 if [ "$CONFIG_HADES" = "y" ]; then
	    bool '  Hades SCSI DMA emulator' CONFIG_TT_DMA_EMUL
	 fi
      fi
   fi
   if [ "$CONFIG_MAC" = "y" ]; then
      bool 'Macintosh NCR5380 SCSI' CONFIG_MAC_SCSI
      dep_tristate 'Macintosh NCR53c9[46] SCSI' CONFIG_SCSI_MAC_ESP $CONFIG_SCSI
   fi
#   dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI

   if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
      bool 'WD33C93 SCSI driver for MVME147' CONFIG_MVME147_SCSI
   fi

   if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
      bool 'NCR53C710 SCSI driver for MVME16x' CONFIG_MVME16x_SCSI
   fi

   if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
      bool 'NCR53C710 SCSI driver for BVME6000' CONFIG_BVME6000_SCSI
   fi

   if [ "$CONFIG_SUN3" = "y" ]; then
	dep_tristate 'Sun3 NCR5380 OBIO SCSI' CONFIG_SUN3_SCSI $CONFIG_SCSI
   fi

   if [ "$CONFIG_SUN3X" = "y" ]; then
      bool 'Sun3x ESP SCSI' CONFIG_SUN3X_ESP
   fi

   endmenu

fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then

   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      #
      # Network device configuration
      #
      tristate '  Dummy net driver support' CONFIG_DUMMY
      tristate '  SLIP (serial line) support' CONFIG_SLIP
      if [ "$CONFIG_SLIP" != "n" ]; then
	 bool '    CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
	 bool '    Keepalive and linefill' CONFIG_SLIP_SMART
	 bool '    Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
      fi
      tristate 'PPP (point-to-point protocol) support' CONFIG_PPP
      if [ ! "$CONFIG_PPP" = "n" ]; then
         dep_bool '  PPP multilink support (EXPERIMENTAL)' CONFIG_PPP_MULTILINK $CONFIG_EXPERIMENTAL
         dep_bool '  PPP filtering' CONFIG_PPP_FILTER $CONFIG_FILTER
         dep_tristate '  PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
         dep_tristate '  PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
         dep_tristate '  PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
         dep_tristate '  PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
         if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
             dep_tristate '  PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
         fi
      fi
      tristate '  EQL (serial line load balancing) support' CONFIG_EQUALIZER
      if [ "$CONFIG_ZORRO" = "y" ]; then
	 tristate '  Ariadne support' CONFIG_ARIADNE
	 tristate '  A2065 support' CONFIG_A2065
	 tristate '  Hydra support' CONFIG_HYDRA
	 tristate '  Zorro NS8390-based Ethernet support' CONFIG_ZORRO8390
      fi
      if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
	 tristate '  PCMCIA NE2000 support' CONFIG_APNE
      fi
      if [ "$CONFIG_APOLLO" = "y" ]; then
	 tristate '  Apollo 3c505 support' CONFIG_APOLLO_ELPLUS
      fi
      if [ "$CONFIG_MAC" = "y" ]; then
	 bool '  Macintosh NS 8390 based ethernet cards' CONFIG_MAC8390
	 tristate '  Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)' CONFIG_MACSONIC
	 tristate '  Macintosh SMC 9194 based ethernet cards' CONFIG_SMC9194
	 tristate '  Macintosh CS89x0 based ethernet cards' CONFIG_MAC89x0
	 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
		bool '  Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)' CONFIG_MACMACE
	 fi
      fi
      if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
	 tristate '  MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET
      fi
      if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
	 tristate '  MVME16x Ethernet support' CONFIG_MVME16x_NET
      fi
      if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
	 tristate '  BVME6000 Ethernet support' CONFIG_BVME6000_NET
      fi
      if [ "$CONFIG_ATARI" = "y" ]; then
	 tristate '  Atari Lance support' CONFIG_ATARILANCE
	 if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
	    tristate '  BioNet-100 support' CONFIG_ATARI_BIONET
	    tristate '  PAMsNet support' CONFIG_ATARI_PAMSNET
	 fi
      fi
      if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
	tristate '  Sun3/Sun3x on-board LANCE support' CONFIG_SUN3LANCE
      fi
      if [ "$CONFIG_SUN3" = "y" ]; then
	tristate '  Sun3 on-board Intel 82586 support' CONFIG_SUN3_82586
      fi
      if [ "$CONFIG_HP300" = "y" ]; then
	 bool '  HP on-board LANCE support' CONFIG_HPLANCE
      fi
      if [ "$CONFIG_Q40" = "y" ]; then
         if [  "$CONFIG_PARPORT" != "n" ]; then
	    dep_tristate '  PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
	 fi
         dep_tristate 'NE2000/NE1000 support' CONFIG_NE2000 m
      fi
   fi
   endmenu

fi

mainmenu_option next_comment
comment 'Character devices'
 
bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
   bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
fi

if [ "$CONFIG_Q40" = "y" ]; then
   tristate 'Q40 Standard/generic serial support' CONFIG_SERIAL
fi

if [ "$CONFIG_SERIAL" = "y" ]; then
   bool '  Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED
fi

if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
   bool '    Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
   bool '    Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
   bool '    Support special multiport boards' CONFIG_SERIAL_MULTIPORT
   bool '    Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi

if [ "$CONFIG_ATARI" = "y" ]; then
   define_bool CONFIG_NVRAM y
fi

if [ "$CONFIG_AMIGA" = "y" ]; then
   tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE
   if [ "$CONFIG_AMIGAMOUSE" != "n" ]; then
      define_bool CONFIG_BUSMOUSE y
   fi
fi
if [ "$CONFIG_ATARI" = "y" -a "$CONFIG_VT" = "y" ]; then
   tristate 'Atari mouse support' CONFIG_ATARIMOUSE
   if [ "$CONFIG_ATARIMOUSE" != "n" ]; then
      define_bool CONFIG_BUSMOUSE y
   fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   tristate 'Atari MFP serial support' CONFIG_ATARI_MFPSER
   tristate 'Atari SCC serial support' CONFIG_ATARI_SCC
   if [ "$CONFIG_ATARI_SCC" = "y" -o "$CONFIG_ATARI_SCC" = "m" ]; then
      bool '  Atari SCC serial DMA support' CONFIG_ATARI_SCC_DMA
   fi
   tristate 'Atari MIDI serial support' CONFIG_ATARI_MIDI
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Atari DSP56k support (EXPERIMENTAL)' CONFIG_ATARI_DSP56K
   fi
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
   tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
   if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
      tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
   fi
   tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
   fi
fi
if [ "$CONFIG_PARPORT" = "n" ]; then
   if [ "$CONFIG_ZORRO" = "y" ]; then
      tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
      dep_tristate '  GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
      dep_tristate '  GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
   fi
fi
if [ "$CONFIG_MAC" = "y" ]; then
   tristate 'Macintosh serial support' CONFIG_MAC_SCC
   bool 'Apple Desktop Bus (ADB) support' CONFIG_ADB
   if [ "$CONFIG_ADB" = "y" ]; then
      bool '   Include Mac II ADB driver' CONFIG_ADB_MACII
      bool '   Include Mac IIsi ADB driver' CONFIG_ADB_MACIISI
      bool '   Include CUDA ADB driver' CONFIG_ADB_CUDA
      bool '   Include IOP (IIfx/Quadra 9x0) ADB driver' CONFIG_ADB_IOP
      bool '   Include PMU (Powerbook) ADB driver' CONFIG_ADB_PMU68K
   fi
   dep_bool '   Use input layer for ADB devices' CONFIG_INPUT_ADBHID $CONFIG_INPUT
   if [ "$CONFIG_INPUT_ADBHID" = "y" ]; then
      define_bool CONFIG_MAC_HID y
      bool '     Support for ADB raw keycodes' CONFIG_MAC_ADBKEYCODES
      bool '     Support for mouse button 2+3 emulation' CONFIG_MAC_EMUMOUSEBTN
   else
      bool '   Support for ADB keyboard (old driver)' CONFIG_ADB_KEYBOARD
   fi
fi
if [ "$CONFIG_HP300" = "y" -a "$CONFIG_DIO" = "y" ]; then
   tristate 'HP DCA serial support' CONFIG_HPDCA
fi
if [ "$CONFIG_MVME147" = "y" ]; then
   bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC
fi
if [ "$CONFIG_MVME16x" = "y" ]; then
   bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167
   bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC
fi
if [ "$CONFIG_BVME6000" = "y" ]; then
   bool 'SCC support for BVME6000 serial ports' CONFIG_BVME6000_SCC
fi
if [ "$CONFIG_APOLLO" = "y" ]; then
   bool 'Support for DN serial port (dummy)' CONFIG_DN_SERIAL
   define_tristate CONFIG_SERIAL $CONFIG_DN_SERIAL
fi 

if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
   bool 'Sun3/3x builtin serial support' CONFIG_SUN3X_ZS
else
   define_bool CONFIG_SUN3X_ZS n
fi
if [ "$CONFIG_SUN3X_ZS" = "y" ]; then
   define_bool CONFIG_SUN_KEYBOARD y
   define_bool CONFIG_SUN_MOUSE y
   define_bool CONFIG_BUSMOUSE y
   define_bool CONFIG_SBUS y
   define_bool CONFIG_SBUSCHAR y
   define_bool CONFIG_SUN_SERIAL y
else
   define_bool CONFIG_SUN_KEYBOARD n
   define_bool CONFIG_SUN_MOUSE n
   define_bool CONFIG_SBUS n
fi

if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \
     "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \
     "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o "$CONFIG_GVPIOEXT" = "y" -o \
     "$CONFIG_MULTIFACE_III_TTY" = "y" -o "$CONFIG_HPDCA" = "y" -o \
     "$CONFIG_SUN3X_ZS" = "y" -o "$CONFIG_SERIAL" = "y" -o \
     "$CONFIG_MVME147_SCC" -o "$CONFIG_SERIAL167" = "y" -o \
     "$CONFIG_MVME162_SCC" -o "$CONFIG_BVME6000_SCC" = "y" -o \
     "$CONFIG_DN_SERIAL" ]; then
   bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
fi
bool 'Support for user serial device modules' CONFIG_USERIAL
bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
   bool '  Software Watchdog' CONFIG_SOFT_WATCHDOG
fi
if [ "$CONFIG_SUN3" = "y" ]; then
   define_bool CONFIG_GEN_RTC y
else
   tristate 'Generic /dev/rtc emulation' CONFIG_GEN_RTC      
fi
if [ "$CONFIG_GEN_RTC" != "n" ]; then
   bool '   Extended RTC operation' CONFIG_GEN_RTC_X
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int '  Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi

endmenu

mainmenu_option next_comment
comment 'Sound support'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/dmasound/Config.in
fi
endmenu

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   source drivers/video/Config.in
   endmenu
fi

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then
   bool '  Magic SysRq key' CONFIG_MAGIC_SYSRQ
   bool '  Debug memory allocations' CONFIG_DEBUG_SLAB
   bool '  Verbose BUG() reporting' CONFIG_DEBUG_BUGVERBOSE
fi

int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0

endmenu

source crypto/Config.in
source lib/Config.in