/* * Here is where the ball gets rolling as far as the kernel is concerned. * When control is transferred to _start, the bootload has already * loaded us to the correct address. All that's left to do here is * to set up the kernel's global pointer and jump to the kernel * entry point. * * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co * David Mosberger-Tang * Stephane Eranian * Copyright (C) 1999 VA Linux Systems * Copyright (C) 1999 Walt Drummond * Copyright (C) 1999 Intel Corp. * Copyright (C) 1999 Asit Mallick * Copyright (C) 1999 Don Dugger * Copyright (C) 2002 Fenghua Yu * -Optimize __ia64_save_fpu() and __ia64_load_fpu() for Itanium 2. * Copyright (C) 2003 Silicon Graphics, Inc. */ #include #include #include #include #include #include #include #include #include #include #include .section __special_page_section,"ax" .global empty_zero_page empty_zero_page: .skip PAGE_SIZE .global swapper_pg_dir swapper_pg_dir: .skip PAGE_SIZE .rodata halt_msg: stringz "Halting kernel\n" .text .global start_ap /* * Start the kernel. When the bootloader passes control to _start(), r28 * points to the address of the boot parameter area. Execution reaches * here in physical mode. */ GLOBAL_ENTRY(_start) start_ap: .prologue .save rp, r4 // terminate unwind chain with a NULL rp mov r4=r0 .body /* * Initialize the region register for region 7 and install a translation register * that maps the kernel's text and data: */ rsm psr.i | psr.ic ;; srlz.i ;; mov r20=((ia64_rid(IA64_REGION_ID_KERNEL, (7<<61)) << 8) | (IA64_GRANULE_SHIFT << 2)) movl r21=(7<<61) ;; mov rr[r21]=r20 ;; /* * Now pin mappings into the TLB for kernel text and data */ mov r18=KERNEL_TR_PAGE_SHIFT<<2 movl r17=KERNEL_START ;; mov cr.itir=r18 mov cr.ifa=r17 mov r16=IA64_TR_KERNEL mov r3=ip movl r18=PAGE_KERNEL ;; dep r2=0,r3,0,KERNEL_TR_PAGE_SHIFT ;; or r18=r2,r18 ;; srlz.i ;; itr.i itr[r16]=r18 ;; itr.d dtr[r16]=r18 ;; srlz.i /* * Switch into virtual mode: */ movl r16=(IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN \ |IA64_PSR_DI) ;; mov cr.ipsr=r16 movl r17=1f ;; mov cr.iip=r17 mov cr.ifs=r0 ;; rfi ;; 1: // now we are in virtual mode // set IVT entry point---can't access I/O ports without it movl r3=ia64_ivt ;; mov cr.iva=r3 movl r2=FPSR_DEFAULT ;; srlz.i movl gp=__gp mov ar.fpsr=r2 ;; #ifdef CONFIG_IA64_EARLY_PRINTK mov r3=(6<<8) | (IA64_GRANULE_SHIFT<<2) movl r2=6<<61 ;; mov rr[r2]=r3 ;; srlz.i ;; #endif #define isAP p2 // are we an Application Processor? #define isBP p3 // are we the Bootstrap Processor? #ifdef CONFIG_SMP /* * Find the init_task for the currently booting CPU. At poweron, and in * UP mode, cpucount is 0. */ movl r3=cpucount ;; ld4 r3=[r3] // r3 <- smp_processor_id() #else mov r3=0 #endif ;; cmp4.ne isAP,isBP=r3,r0 /* * Make task struct pointer in init_tasks an identity mapped pointer. * The value that is compiled into the array may not be identity mapped. */ movl r18=init_tasks ;; shladd r18=r3,3,r18 ;; ld8 r8=[r18] ;; tpa r3=r8 // r3 == phys addr of task struct ;; dep r2=-1,r3,61,3 // IMVA of task ;; st8 [r18]=r2 // and save it back in init_tasks[thiscpu] // load mapping for stack (virtaddr in r2, physaddr in r3) // load dtr[2] only if the va for current (r2) isn't covered by the dtr[0] shr.u r18=r2,KERNEL_TR_PAGE_SHIFT /* va of current in units of kernel-pages */ movl r17=KERNEL_START>>KERNEL_TR_PAGE_SHIFT /* va of kernel-start in units of kernel-pages */ ;; cmp.eq p0,p6=r17,r18 rsm psr.ic movl r17=PAGE_KERNEL ;; srlz.d dep r18=0,r3,0,12 ;; or r18=r17,r18 ;; mov r17=rr[r2] shr.u r16=r3,IA64_GRANULE_SHIFT ;; dep r17=0,r17,8,24 ;; mov cr.itir=r17 mov cr.ifa=r2 mov r19=IA64_TR_CURRENT_STACK ;; (p6) itr.d dtr[r19]=r18 ;; ssm psr.ic srlz.d ;; // load the "current" pointer (r13) and ar.k6 with the current task mov IA64_KR(CURRENT)=r3 // Physical address mov IA64_KR(CURRENT_STACK)=r16 mov r13=r2 /* * Reserve space at the top of the stack for "struct pt_regs". Kernel threads * don't store interesting values in that structure, but the space still needs * to be there because time-critical stuff such as the context switching can * be implemented more efficiently (for example, __switch_to() * always sets the psr.dfh bit of the task it is switching to). */ addl r12=IA64_STK_OFFSET-IA64_PT_REGS_SIZE-16,r2 addl r2=IA64_RBS_OFFSET,r2 // initialize the RSE mov ar.rsc=0 // place RSE in enforced lazy mode ;; loadrs // clear the dirty partition ;; mov ar.bspstore=r2 // establish the new RSE stack ;; mov ar.rsc=0x3 // place RSE in eager mode (isBP) dep r28=-1,r28,61,3 // make address virtual (isBP) movl r2=ia64_boot_param ;; (isBP) st8 [r2]=r28 // save the address of the boot param area passed by the bootloader #ifdef CONFIG_IA64_EARLY_PRINTK .rodata alive_msg: stringz "I'm alive and well\n" alive_msg_end: .previous alloc r2=ar.pfs,0,0,2,0 movl out0=alive_msg movl out1=alive_msg_end-alive_msg-1 ;; br.call.sptk.many rp=early_printk 1: // force new bundle #endif /* CONFIG_IA64_EARLY_PRINTK */ #ifdef CONFIG_SMP (isAP) br.call.sptk.many rp=start_secondary .ret0: (isAP) br.cond.sptk self #endif // This is executed by the bootstrap processor (bsp) only: #ifdef CONFIG_IA64_FW_EMU // initialize PAL & SAL emulator: br.call.sptk.many rp=sys_fw_init .ret1: #endif br.call.sptk.many rp=start_kernel .ret2: addl r3=@ltoff(halt_msg),gp ;; alloc r2=ar.pfs,8,0,2,0 ;; ld8 out0=[r3] br.call.sptk.many b0=console_print self: br.sptk.many self // endless loop END(_start) GLOBAL_ENTRY(ia64_save_debug_regs) alloc r16=ar.pfs,1,0,0,0 mov r20=ar.lc // preserve ar.lc mov ar.lc=IA64_NUM_DBG_REGS-1 mov r18=0 add r19=IA64_NUM_DBG_REGS*8,in0 ;; 1: mov r16=dbr[r18] #ifdef CONFIG_ITANIUM ;; srlz.d #endif mov r17=ibr[r18] add r18=1,r18 ;; st8.nta [in0]=r16,8 st8.nta [r19]=r17,8 br.cloop.sptk.many 1b ;; mov ar.lc=r20 // restore ar.lc br.ret.sptk.many rp END(ia64_save_debug_regs) GLOBAL_ENTRY(ia64_load_debug_regs) alloc r16=ar.pfs,1,0,0,0 lfetch.nta [in0] mov r20=ar.lc // preserve ar.lc add r19=IA64_NUM_DBG_REGS*8,in0 mov ar.lc=IA64_NUM_DBG_REGS-1 mov r18=-1 ;; 1: ld8.nta r16=[in0],8 ld8.nta r17=[r19],8 add r18=1,r18 ;; mov dbr[r18]=r16 #ifdef CONFIG_ITANIUM ;; srlz.d // Errata 132 (NoFix status) #endif mov ibr[r18]=r17 br.cloop.sptk.many 1b ;; mov ar.lc=r20 // restore ar.lc br.ret.sptk.many rp END(ia64_load_debug_regs) GLOBAL_ENTRY(__ia64_save_fpu) alloc r2=ar.pfs,1,4,0,0 adds loc0=96*16-16,in0 adds loc1=96*16-16-128,in0 ;; stf.spill.nta [loc0]=f127,-256 stf.spill.nta [loc1]=f119,-256 ;; stf.spill.nta [loc0]=f111,-256 stf.spill.nta [loc1]=f103,-256 ;; stf.spill.nta [loc0]=f95,-256 stf.spill.nta [loc1]=f87,-256 ;; stf.spill.nta [loc0]=f79,-256 stf.spill.nta [loc1]=f71,-256 ;; stf.spill.nta [loc0]=f63,-256 stf.spill.nta [loc1]=f55,-256 adds loc2=96*16-32,in0 ;; stf.spill.nta [loc0]=f47,-256 stf.spill.nta [loc1]=f39,-256 adds loc3=96*16-32-128,in0 ;; stf.spill.nta [loc2]=f126,-256 stf.spill.nta [loc3]=f118,-256 ;; stf.spill.nta [loc2]=f110,-256 stf.spill.nta [loc3]=f102,-256 ;; stf.spill.nta [loc2]=f94,-256 stf.spill.nta [loc3]=f86,-256 ;; stf.spill.nta [loc2]=f78,-256 stf.spill.nta [loc3]=f70,-256 ;; stf.spill.nta [loc2]=f62,-256 stf.spill.nta [loc3]=f54,-256 adds loc0=96*16-48,in0 ;; stf.spill.nta [loc2]=f46,-256 stf.spill.nta [loc3]=f38,-256 adds loc1=96*16-48-128,in0 ;; stf.spill.nta [loc0]=f125,-256 stf.spill.nta [loc1]=f117,-256 ;; stf.spill.nta [loc0]=f109,-256 stf.spill.nta [loc1]=f101,-256 ;; stf.spill.nta [loc0]=f93,-256 stf.spill.nta [loc1]=f85,-256 ;; stf.spill.nta [loc0]=f77,-256 stf.spill.nta [loc1]=f69,-256 ;; stf.spill.nta [loc0]=f61,-256 stf.spill.nta [loc1]=f53,-256 adds loc2=96*16-64,in0 ;; stf.spill.nta [loc0]=f45,-256 stf.spill.nta [loc1]=f37,-256 adds loc3=96*16-64-128,in0 ;; stf.spill.nta [loc2]=f124,-256 stf.spill.nta [loc3]=f116,-256 ;; stf.spill.nta [loc2]=f108,-256 stf.spill.nta [loc3]=f100,-256 ;; stf.spill.nta [loc2]=f92,-256 stf.spill.nta [loc3]=f84,-256 ;; stf.spill.nta [loc2]=f76,-256 stf.spill.nta [loc3]=f68,-256 ;; stf.spill.nta [loc2]=f60,-256 stf.spill.nta [loc3]=f52,-256 adds loc0=96*16-80,in0 ;; stf.spill.nta [loc2]=f44,-256 stf.spill.nta [loc3]=f36,-256 adds loc1=96*16-80-128,in0 ;; stf.spill.nta [loc0]=f123,-256 stf.spill.nta [loc1]=f115,-256 ;; stf.spill.nta [loc0]=f107,-256 stf.spill.nta [loc1]=f99,-256 ;; stf.spill.nta [loc0]=f91,-256 stf.spill.nta [loc1]=f83,-256 ;; stf.spill.nta [loc0]=f75,-256 stf.spill.nta [loc1]=f67,-256 ;; stf.spill.nta [loc0]=f59,-256 stf.spill.nta [loc1]=f51,-256 adds loc2=96*16-96,in0 ;; stf.spill.nta [loc0]=f43,-256 stf.spill.nta [loc1]=f35,-256 adds loc3=96*16-96-128,in0 ;; stf.spill.nta [loc2]=f122,-256 stf.spill.nta [loc3]=f114,-256 ;; stf.spill.nta [loc2]=f106,-256 stf.spill.nta [loc3]=f98,-256 ;; stf.spill.nta [loc2]=f90,-256 stf.spill.nta [loc3]=f82,-256 ;; stf.spill.nta [loc2]=f74,-256 stf.spill.nta [loc3]=f66,-256 ;; stf.spill.nta [loc2]=f58,-256 stf.spill.nta [loc3]=f50,-256 adds loc0=96*16-112,in0 ;; stf.spill.nta [loc2]=f42,-256 stf.spill.nta [loc3]=f34,-256 adds loc1=96*16-112-128,in0 ;; stf.spill.nta [loc0]=f121,-256 stf.spill.nta [loc1]=f113,-256 ;; stf.spill.nta [loc0]=f105,-256 stf.spill.nta [loc1]=f97,-256 ;; stf.spill.nta [loc0]=f89,-256 stf.spill.nta [loc1]=f81,-256 ;; stf.spill.nta [loc0]=f73,-256 stf.spill.nta [loc1]=f65,-256 ;; stf.spill.nta [loc0]=f57,-256 stf.spill.nta [loc1]=f49,-256 adds loc2=96*16-128,in0 ;; stf.spill.nta [loc0]=f41,-256 stf.spill.nta [loc1]=f33,-256 adds loc3=96*16-128-128,in0 ;; stf.spill.nta [loc2]=f120,-256 stf.spill.nta [loc3]=f112,-256 ;; stf.spill.nta [loc2]=f104,-256 stf.spill.nta [loc3]=f96,-256 ;; stf.spill.nta [loc2]=f88,-256 stf.spill.nta [loc3]=f80,-256 ;; stf.spill.nta [loc2]=f72,-256 stf.spill.nta [loc3]=f64,-256 ;; stf.spill.nta [loc2]=f56,-256 stf.spill.nta [loc3]=f48,-256 ;; stf.spill.nta [loc2]=f40 stf.spill.nta [loc3]=f32 br.ret.sptk.many rp END(__ia64_save_fpu) GLOBAL_ENTRY(__ia64_load_fpu) alloc r2=ar.pfs,1,2,0,0 adds r3=128,in0 adds r14=256,in0 adds r15=384,in0 mov loc0=512 mov loc1=-1024+16 ;; ldf.fill.nta f32=[in0],loc0 ldf.fill.nta f40=[ r3],loc0 ldf.fill.nta f48=[r14],loc0 ldf.fill.nta f56=[r15],loc0 ;; ldf.fill.nta f64=[in0],loc0 ldf.fill.nta f72=[ r3],loc0 ldf.fill.nta f80=[r14],loc0 ldf.fill.nta f88=[r15],loc0 ;; ldf.fill.nta f96=[in0],loc1 ldf.fill.nta f104=[ r3],loc1 ldf.fill.nta f112=[r14],loc1 ldf.fill.nta f120=[r15],loc1 ;; ldf.fill.nta f33=[in0],loc0 ldf.fill.nta f41=[ r3],loc0 ldf.fill.nta f49=[r14],loc0 ldf.fill.nta f57=[r15],loc0 ;; ldf.fill.nta f65=[in0],loc0 ldf.fill.nta f73=[ r3],loc0 ldf.fill.nta f81=[r14],loc0 ldf.fill.nta f89=[r15],loc0 ;; ldf.fill.nta f97=[in0],loc1 ldf.fill.nta f105=[ r3],loc1 ldf.fill.nta f113=[r14],loc1 ldf.fill.nta f121=[r15],loc1 ;; ldf.fill.nta f34=[in0],loc0 ldf.fill.nta f42=[ r3],loc0 ldf.fill.nta f50=[r14],loc0 ldf.fill.nta f58=[r15],loc0 ;; ldf.fill.nta f66=[in0],loc0 ldf.fill.nta f74=[ r3],loc0 ldf.fill.nta f82=[r14],loc0 ldf.fill.nta f90=[r15],loc0 ;; ldf.fill.nta f98=[in0],loc1 ldf.fill.nta f106=[ r3],loc1 ldf.fill.nta f114=[r14],loc1 ldf.fill.nta f122=[r15],loc1 ;; ldf.fill.nta f35=[in0],loc0 ldf.fill.nta f43=[ r3],loc0 ldf.fill.nta f51=[r14],loc0 ldf.fill.nta f59=[r15],loc0 ;; ldf.fill.nta f67=[in0],loc0 ldf.fill.nta f75=[ r3],loc0 ldf.fill.nta f83=[r14],loc0 ldf.fill.nta f91=[r15],loc0 ;; ldf.fill.nta f99=[in0],loc1 ldf.fill.nta f107=[ r3],loc1 ldf.fill.nta f115=[r14],loc1 ldf.fill.nta f123=[r15],loc1 ;; ldf.fill.nta f36=[in0],loc0 ldf.fill.nta f44=[ r3],loc0 ldf.fill.nta f52=[r14],loc0 ldf.fill.nta f60=[r15],loc0 ;; ldf.fill.nta f68=[in0],loc0 ldf.fill.nta f76=[ r3],loc0 ldf.fill.nta f84=[r14],loc0 ldf.fill.nta f92=[r15],loc0 ;; ldf.fill.nta f100=[in0],loc1 ldf.fill.nta f108=[ r3],loc1 ldf.fill.nta f116=[r14],loc1 ldf.fill.nta f124=[r15],loc1 ;; ldf.fill.nta f37=[in0],loc0 ldf.fill.nta f45=[ r3],loc0 ldf.fill.nta f53=[r14],loc0 ldf.fill.nta f61=[r15],loc0 ;; ldf.fill.nta f69=[in0],loc0 ldf.fill.nta f77=[ r3],loc0 ldf.fill.nta f85=[r14],loc0 ldf.fill.nta f93=[r15],loc0 ;; ldf.fill.nta f101=[in0],loc1 ldf.fill.nta f109=[ r3],loc1 ldf.fill.nta f117=[r14],loc1 ldf.fill.nta f125=[r15],loc1 ;; ldf.fill.nta f38 =[in0],loc0 ldf.fill.nta f46 =[ r3],loc0 ldf.fill.nta f54 =[r14],loc0 ldf.fill.nta f62 =[r15],loc0 ;; ldf.fill.nta f70 =[in0],loc0 ldf.fill.nta f78 =[ r3],loc0 ldf.fill.nta f86 =[r14],loc0 ldf.fill.nta f94 =[r15],loc0 ;; ldf.fill.nta f102=[in0],loc1 ldf.fill.nta f110=[ r3],loc1 ldf.fill.nta f118=[r14],loc1 ldf.fill.nta f126=[r15],loc1 ;; ldf.fill.nta f39 =[in0],loc0 ldf.fill.nta f47 =[ r3],loc0 ldf.fill.nta f55 =[r14],loc0 ldf.fill.nta f63 =[r15],loc0 ;; ldf.fill.nta f71 =[in0],loc0 ldf.fill.nta f79 =[ r3],loc0 ldf.fill.nta f87 =[r14],loc0 ldf.fill.nta f95 =[r15],loc0 ;; ldf.fill.nta f103=[in0] ldf.fill.nta f111=[ r3] ldf.fill.nta f119=[r14] ldf.fill.nta f127=[r15] br.ret.sptk.many rp END(__ia64_load_fpu) GLOBAL_ENTRY(__ia64_init_fpu) stf.spill [sp]=f0 // M3 mov f32=f0 // F nop.b 0 ldfps f33,f34=[sp] // M0 ldfps f35,f36=[sp] // M1 mov f37=f0 // F ;; setf.s f38=r0 // M2 setf.s f39=r0 // M3 mov f40=f0 // F ldfps f41,f42=[sp] // M0 ldfps f43,f44=[sp] // M1 mov f45=f0 // F setf.s f46=r0 // M2 setf.s f47=r0 // M3 mov f48=f0 // F ldfps f49,f50=[sp] // M0 ldfps f51,f52=[sp] // M1 mov f53=f0 // F setf.s f54=r0 // M2 setf.s f55=r0 // M3 mov f56=f0 // F ldfps f57,f58=[sp] // M0 ldfps f59,f60=[sp] // M1 mov f61=f0 // F setf.s f62=r0 // M2 setf.s f63=r0 // M3 mov f64=f0 // F ldfps f65,f66=[sp] // M0 ldfps f67,f68=[sp] // M1 mov f69=f0 // F setf.s f70=r0 // M2 setf.s f71=r0 // M3 mov f72=f0 // F ldfps f73,f74=[sp] // M0 ldfps f75,f76=[sp] // M1 mov f77=f0 // F setf.s f78=r0 // M2 setf.s f79=r0 // M3 mov f80=f0 // F ldfps f81,f82=[sp] // M0 ldfps f83,f84=[sp] // M1 mov f85=f0 // F setf.s f86=r0 // M2 setf.s f87=r0 // M3 mov f88=f0 // F /* * When the instructions are cached, it would be faster to initialize * the remaining registers with simply mov instructions (F-unit). * This gets the time down to ~29 cycles. However, this would use up * 33 bundles, whereas continuing with the above pattern yields * 10 bundles and ~30 cycles. */ ldfps f89,f90=[sp] // M0 ldfps f91,f92=[sp] // M1 mov f93=f0 // F setf.s f94=r0 // M2 setf.s f95=r0 // M3 mov f96=f0 // F ldfps f97,f98=[sp] // M0 ldfps f99,f100=[sp] // M1 mov f101=f0 // F setf.s f102=r0 // M2 setf.s f103=r0 // M3 mov f104=f0 // F ldfps f105,f106=[sp] // M0 ldfps f107,f108=[sp] // M1 mov f109=f0 // F setf.s f110=r0 // M2 setf.s f111=r0 // M3 mov f112=f0 // F ldfps f113,f114=[sp] // M0 ldfps f115,f116=[sp] // M1 mov f117=f0 // F setf.s f118=r0 // M2 setf.s f119=r0 // M3 mov f120=f0 // F ldfps f121,f122=[sp] // M0 ldfps f123,f124=[sp] // M1 mov f125=f0 // F setf.s f126=r0 // M2 setf.s f127=r0 // M3 br.ret.sptk.many rp // F END(__ia64_init_fpu) /* * Switch execution mode from virtual to physical * * Inputs: * r16 = new psr to establish * * Note: RSE must already be in enforced lazy mode */ GLOBAL_ENTRY(ia64_switch_mode_phys) { alloc r2=ar.pfs,0,0,0,0 rsm psr.i | psr.ic // disable interrupts and interrupt collection mov r15=ip } ;; { flushrs // must be first insn in group srlz.i } ;; mov cr.ipsr=r16 // set new PSR add r3=1f-ia64_switch_mode_phys,r15 mov r17=ar.bsp mov r14=rp // get return address into a general register ;; // going to physical mode, use tpa to translate virt->phys tpa r17=r17 tpa r3=r3 tpa sp=sp tpa r14=r14 ;; mov r18=ar.rnat // save ar.rnat mov ar.bspstore=r17 // this steps on ar.rnat mov cr.iip=r3 mov cr.ifs=r0 ;; mov ar.rnat=r18 // restore ar.rnat rfi // must be last insn in group ;; 1: mov rp=r14 br.ret.sptk.many rp END(ia64_switch_mode_phys) /* * Switch execution mode from physical to virtual * * Inputs: * r16 = new psr to establish * * Note: RSE must already be in enforced lazy mode */ GLOBAL_ENTRY(ia64_switch_mode_virt) { alloc r2=ar.pfs,0,0,0,0 rsm psr.i | psr.ic // disable interrupts and interrupt collection mov r15=ip } ;; { flushrs // must be first insn in group srlz.i } ;; mov cr.ipsr=r16 // set new PSR add r3=1f-ia64_switch_mode_virt,r15 mov r17=ar.bsp mov r14=rp // get return address into a general register ;; // going to virtual // - for code addresses, set upper bits of addr to KERNEL_START // - for stack addresses, set upper 3 bits to 0xe.... Dont change any of the // lower bits since we want it to stay identity mapped movl r18=KERNEL_START dep r3=0,r3,KERNEL_TR_PAGE_SHIFT,64-KERNEL_TR_PAGE_SHIFT dep r14=0,r14,KERNEL_TR_PAGE_SHIFT,64-KERNEL_TR_PAGE_SHIFT dep r17=-1,r17,61,3 dep sp=-1,sp,61,3 ;; or r3=r3,r18 or r14=r14,r18 ;; mov r18=ar.rnat // save ar.rnat mov ar.bspstore=r17 // this steps on ar.rnat mov cr.iip=r3 mov cr.ifs=r0 ;; mov ar.rnat=r18 // restore ar.rnat rfi // must be last insn in group ;; 1: mov rp=r14 br.ret.sptk.many rp END(ia64_switch_mode_virt) #ifdef CONFIG_IA64_BRL_EMU /* * Assembly routines used by brl_emu.c to set preserved register state. */ #define SET_REG(reg) \ GLOBAL_ENTRY(ia64_set_##reg); \ alloc r16=ar.pfs,1,0,0,0; \ mov reg=r32; \ ;; \ br.ret.sptk.many rp; \ END(ia64_set_##reg) SET_REG(b1); SET_REG(b2); SET_REG(b3); SET_REG(b4); SET_REG(b5); #endif /* CONFIG_IA64_BRL_EMU */ #ifdef CONFIG_SMP /* * This routine handles spinlock contention. It uses a simple exponential backoff * algorithm to reduce unnecessary bus traffic. The initial delay is selected from * the low-order bits of the cycle counter (a cheap "randomizer"). I'm sure this * could use additional tuning, especially on systems with a large number of CPUs. * Also, I think the maximum delay should be made a function of the number of CPUs in * the system. --davidm 00/08/05 * * WARNING: This is not a normal procedure. It gets called from C code without * the compiler knowing about it. Thus, we must not use any scratch registers * beyond those that were declared "clobbered" at the call-site (see spin_lock() * macro). We may not even use the stacked registers, because that could overwrite * output registers. Similarly, we can't use the scratch stack area as it may be * in use, too. * * Inputs: * ar.ccv = 0 (and available for use) * r28 = available for use * r29 = available for use * r30 = non-zero (and available for use) * r31 = address of lock we're trying to acquire * p15 = available for use */ # define delay r28 # define timeout r29 # define tmp r30 GLOBAL_ENTRY(ia64_spinlock_contention) mov tmp=ar.itc ;; and delay=0x3f,tmp ;; .retry: add timeout=tmp,delay shl delay=delay,1 ;; dep delay=delay,r0,0,13 // limit delay to 8192 cycles ;; // delay a little... .wait: sub tmp=tmp,timeout #ifdef GAS_HAS_HINT_INSN hint @pause #endif or delay=0xf,delay // make sure delay is non-zero (otherwise we get stuck with 0) ;; cmp.lt p15,p0=tmp,r0 mov tmp=ar.itc (p15) br.cond.sptk .wait ;; ld4 tmp=[r31] ;; cmp.ne p15,p0=tmp,r0 mov tmp=ar.itc (p15) br.cond.sptk .retry // lock is still busy ;; // try acquiring lock (we know ar.ccv is still zero!): mov tmp=1 ;; cmpxchg4.acq tmp=[r31],tmp,ar.ccv ;; cmp.eq p15,p0=tmp,r0 mov tmp=ar.itc (p15) br.ret.sptk.many b7 // got lock -> return br .retry // still no luck, retry END(ia64_spinlock_contention) #endif