mainmenu_name "Kernel configuration of Linux for IA-64 machines"

mainmenu_option next_comment
 comment 'Code maturity level options'
 bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_IA64 y

define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_SBUS n
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y

choice 'IA-64 processor type' \
	"Itanium		CONFIG_ITANIUM \
	 Itanium-2		CONFIG_MCKINLEY" Itanium

choice 'IA-64 system type'					\
	"generic		CONFIG_IA64_GENERIC		\
	 DIG-compliant		CONFIG_IA64_DIG			\
	 HP			CONFIG_IA64_HP_ZX1		\
	 SGI-SN2		CONFIG_IA64_SGI_SN2		\
	 Ski-simulator		CONFIG_IA64_HP_SIM" generic

if [ "$CONFIG_ITANIUM" = "y" ]; then
  choice 'Kernel page size'						\
	"4KB			CONFIG_IA64_PAGE_SIZE_4KB		\
	 8KB			CONFIG_IA64_PAGE_SIZE_8KB		\
	 16KB			CONFIG_IA64_PAGE_SIZE_16KB" 16KB
else
  choice 'Kernel page size'						\
	"4KB			CONFIG_IA64_PAGE_SIZE_4KB		\
	 8KB			CONFIG_IA64_PAGE_SIZE_8KB		\
	 16KB			CONFIG_IA64_PAGE_SIZE_16KB		\
	 64KB			CONFIG_IA64_PAGE_SIZE_64KB" 16KB
fi

if [ "$CONFIG_ITANIUM" = "y" ]; then
	define_bool CONFIG_IA64_BRL_EMU y
	bool '  Enable Itanium B-step specific code' CONFIG_ITANIUM_BSTEP_SPECIFIC
	define_int CONFIG_IA64_L1_CACHE_SHIFT 6 # align cache-sensitive data to 64 bytes
fi

if [ "$CONFIG_MCKINLEY" = "y" ]; then
	define_int CONFIG_IA64_L1_CACHE_SHIFT 7
fi

if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_DIG" = "y" -o "$CONFIG_IA64_HP_ZX1" = "y" ]; then
	bool '  Enable NUMA support' CONFIG_NUMA
	if [ "$CONFIG_NUMA" = "y" ]; then
	  define_bool CONFIG_DISCONTIGMEM y
	fi
	bool '  Enable IA-64 Machine Check Abort' CONFIG_IA64_MCA
	define_bool CONFIG_PM y
fi

if [ "$CONFIG_IA64_SGI_SN2" = "y" ]; then
	define_bool CONFIG_IA64_SGI_SN y
	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG
	bool '  Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN_SIM
	bool '  Enable protocol mode for the L1 console' CONFIG_SERIAL_SGI_L1_PROTOCOL
	define_bool CONFIG_HWGFS_FS y
	define_bool CONFIG_DISCONTIGMEM y
	define_bool CONFIG_IA64_MCA y
	define_bool CONFIG_NUMA y
	define_bool CONFIG_PERCPU_IRQ y
	tristate '  PCIBA support' CONFIG_PCIBA
fi

define_bool CONFIG_KCORE_ELF y	# On IA-64, we always want an ELF /proc/kcore.

define_int CONFIG_FORCE_MAX_ZONEORDER 19

if [ "$CONFIG_HUGETLB_PAGE" = "y" ]; then
	if [ "$CONFIG_MCKINLEY" = "y" ]; then
		choice '    IA-64 Huge TLB Page Size'		\
			"4GB	CONFIG_HUGETLB_PAGE_SIZE_4GB	\
			 1GB	CONFIG_HUGETLB_PAGE_SIZE_1GB	\
                         256MB	CONFIG_HUGETLB_PAGE_SIZE_256MB	\
			 64MB	CONFIG_HUGETLB_PAGE_SIZE_64MB	\
			 16MB	CONFIG_HUGETLB_PAGE_SIZE_16MB	\
			 4MB	CONFIG_HUGETLB_PAGE_SIZE_4MB	\
			 1MB	CONFIG_HUGETLB_PAGE_SIZE_1MB	\
			 256KB	CONFIG_HUGETLB_PAGE_SIZE_256KB"	16MB
	else
		choice '    IA-64 Huge TLB Page Size'		\
			"256MB	CONFIG_HUGETLB_PAGE_SIZE_256MB	\
			 64MB	CONFIG_HUGETLB_PAGE_SIZE_64MB	\
			 16MB	CONFIG_HUGETLB_PAGE_SIZE_16MB	\
			 4MB	CONFIG_HUGETLB_PAGE_SIZE_4MB	\
			 1MB	CONFIG_HUGETLB_PAGE_SIZE_1MB	\
			 256KB	CONFIG_HUGETLB_PAGE_SIZE_256KB"	16MB
	fi
fi

bool 'Use PAL_HALT_LIGHT in idle loop' CONFIG_IA64_PAL_IDLE
bool 'SMP support' CONFIG_SMP
if [ "$CONFIG_SMP" = "y" ]; then
   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
fi

bool 'Support running of Linux/x86 binaries' CONFIG_IA32_SUPPORT
bool 'Performance monitor support' CONFIG_PERFMON
tristate '/proc/pal support' CONFIG_IA64_PALINFO
tristate '/proc/efi/vars support' CONFIG_EFI_VARS

bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
  define_bool CONFIG_ACPI y
  define_bool CONFIG_ACPI_EFI y
  define_bool CONFIG_ACPI_INTERPRETER y
  define_bool CONFIG_ACPI_KERNEL_CONFIG y

  source drivers/acpi/Config.in

  bool 'PCI support' CONFIG_PCI
  source drivers/pci/Config.in

  bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
  if [ "$CONFIG_HOTPLUG" = "y" ]; then
     source drivers/hotplug/Config.in
     source drivers/pcmcia/Config.in
  else
     define_bool CONFIG_PCMCIA n
  fi

  source drivers/parport/Config.in
fi # !HP_SIM

endmenu

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
  source drivers/mtd/Config.in
  source drivers/pnp/Config.in
  source drivers/block/Config.in
  source drivers/ieee1394/Config.in
  source drivers/message/i2o/Config.in
  source drivers/md/Config.in
  source drivers/message/fusion/Config.in

  mainmenu_option next_comment
  comment 'ATA/IDE/MFM/RLL support'

  tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

  if [ "$CONFIG_IDE" != "n" ]; then
    source drivers/ide/Config.in
  else
    define_bool CONFIG_BLK_DEV_HD n
  fi
  endmenu
else # HP_SIM
  mainmenu_option next_comment
  comment 'Block devices'
  tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
  dep_tristate 'Network block device support' CONFIG_BLK_DEV_NBD $CONFIG_NET

  tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
  if [ "$CONFIG_BLK_DEV_RAM" = "y" -o "$CONFIG_BLK_DEV_RAM" = "m" ]; then
    int '  Default RAM disk size' CONFIG_BLK_DEV_RAM_SIZE 4096
  fi
  endmenu
fi # HP_SIM

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
  if [ "$CONFIG_NET" = "y" ]; then
    mainmenu_option next_comment
    comment 'Network device support'

    bool 'Network device support' CONFIG_NETDEVICES
    if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
      if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
         source drivers/atm/Config.in
      fi
    fi
    endmenu
  fi

  source net/ax25/Config.in

  mainmenu_option next_comment
  comment 'ISDN subsystem'

  tristate 'ISDN support' CONFIG_ISDN
  if [ "$CONFIG_ISDN" != "n" ]; then
    source drivers/isdn/Config.in
  fi
  endmenu

  mainmenu_option next_comment
  comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'

  bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
  if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
    source drivers/cdrom/Config.in
  fi
  endmenu
fi # !HP_SIM

#
# input before char - char/joystick depends on it. As does USB.
#
source drivers/input/Config.in
source drivers/char/Config.in

#source drivers/misc/Config.in

source drivers/media/Config.in

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
  mainmenu_option next_comment
  comment 'Console drivers'
  bool 'VGA text console' CONFIG_VGA_CONSOLE
  source drivers/video/Config.in
  if [ "$CONFIG_FB" = "y" ]; then
    define_bool CONFIG_PCI_CONSOLE y
  fi
  endmenu
fi

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
  mainmenu_option next_comment
  comment 'Sound'

  tristate 'Sound card support' CONFIG_SOUND
  if [ "$CONFIG_SOUND" != "n" ]; then
    source drivers/sound/Config.in
  fi
  endmenu

  source drivers/usb/Config.in

  source crypto/Config.in
  source lib/Config.in

  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
     source net/bluetooth/Config.in
  fi
fi # !HP_SIM

if [ "$CONFIG_IA64_HP_SIM" != "n" -o "$CONFIG_IA64_GENERIC" != "n" ]; then
  mainmenu_option next_comment
  comment 'Simulated drivers'

  bool 'Simulated Ethernet ' CONFIG_HP_SIMETH
  bool 'Simulated serial driver support' CONFIG_HP_SIMSERIAL
  if [ "$CONFIG_SCSI" != "n" ]; then
    bool 'Simulated SCSI disk' CONFIG_HP_SIMSCSI
  fi
  endmenu
fi


mainmenu_option next_comment
comment 'Kernel hacking'

choice 'Physical memory granularity'				\
	"16MB			CONFIG_IA64_GRANULE_16MB	\
	 64MB			CONFIG_IA64_GRANULE_64MB" 64MB

bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then
   bool '  Print possible IA64 hazards to console' CONFIG_IA64_PRINT_HAZARDS
   bool '  Disable VHPT' CONFIG_DISABLE_VHPT
   bool '  Magic SysRq key' CONFIG_MAGIC_SYSRQ

   bool '  Early printk support' CONFIG_IA64_EARLY_PRINTK
   if [ "$CONFIG_IA64_EARLY_PRINTK" != "n" ]; then
      bool '    Early printk on MMIO serial port' CONFIG_IA64_EARLY_PRINTK_UART
      if [ "$CONFIG_IA64_EARLY_PRINTK_UART" != "n" ]; then
         hex '      UART MMIO base address' CONFIG_IA64_EARLY_PRINTK_UART_BASE 0
      fi
      bool '    Early printk on VGA' CONFIG_IA64_EARLY_PRINTK_VGA
   fi
   bool '  Debug memory allocations' CONFIG_DEBUG_SLAB
   bool '  Spinlock debugging' CONFIG_DEBUG_SPINLOCK
   bool '  Turn on compare-and-exchange bug checking (slow!)' CONFIG_IA64_DEBUG_CMPXCHG
   bool '  Turn on irq debug checks (slow!)' CONFIG_IA64_DEBUG_IRQ
fi

int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0

endmenu