/* * Alpha specific irq code. */ #include #include #include #include #include #include #include #include "proto.h" #include "irq_impl.h" #ifndef CONFIG_SMP unsigned long __irq_attempt[NR_IRQS]; #endif /* Hack minimum IPL during interrupt processing for broken hardware. */ #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK int __min_ipl; #endif /* * Performance counter hook. A module can override this to * do something useful. */ static void dummy_perf(unsigned long vector, struct pt_regs *regs) { irq_err_count++; printk(KERN_CRIT "Performance counter interrupt!\n"); } void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf; /* * The main interrupt entry point. */ asmlinkage void do_entInt(unsigned long type, unsigned long vector, unsigned long la_ptr, unsigned long a3, unsigned long a4, unsigned long a5, struct pt_regs regs) { switch (type) { case 0: #ifdef CONFIG_SMP handle_ipi(®s); return; #else irq_err_count++; printk(KERN_CRIT "Interprocessor interrupt? " "You must be kidding!\n"); #endif break; case 1: #ifdef CONFIG_SMP { long cpu; smp_percpu_timer_interrupt(®s); cpu = smp_processor_id(); if (cpu != boot_cpuid) { irq_attempt(cpu, RTC_IRQ)++; kstat.irqs[cpu][RTC_IRQ]++; } else { handle_irq(RTC_IRQ, ®s); } } #else handle_irq(RTC_IRQ, ®s); #endif return; case 2: alpha_mv.machine_check(vector, la_ptr, ®s); return; case 3: alpha_mv.device_interrupt(vector, ®s); return; case 4: perf_irq(vector, ®s); return; default: printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n", type, vector); } printk("PC = %016lx PS=%04lx\n", regs.pc, regs.ps); } void __init common_init_isa_dma(void) { outb(0, DMA1_RESET_REG); outb(0, DMA2_RESET_REG); outb(0, DMA1_CLR_MASK_REG); outb(0, DMA2_CLR_MASK_REG); } void __init init_IRQ(void) { /* Uh, this really MUST come first, just in case * the platform init_irq() causes interrupts/mchecks * (as is the case with RAWHIDE, at least). */ wrent(entInt, 0); alpha_mv.init_irq(); } /* * machine error checks */ #define MCHK_K_TPERR 0x0080 #define MCHK_K_TCPERR 0x0082 #define MCHK_K_HERR 0x0084 #define MCHK_K_ECC_C 0x0086 #define MCHK_K_ECC_NC 0x0088 #define MCHK_K_OS_BUGCHECK 0x008A #define MCHK_K_PAL_BUGCHECK 0x0090 #ifndef CONFIG_SMP struct mcheck_info __mcheck_info; #endif void process_mcheck_info(unsigned long vector, unsigned long la_ptr, struct pt_regs *regs, const char *machine, int expected) { struct el_common *mchk_header; const char *reason; /* * See if the machine check is due to a badaddr() and if so, * ignore it. */ #if DEBUG_MCHECK > 0 printk(KERN_CRIT "%s machine check %s\n", machine, expected ? "expected." : "NOT expected!!!"); #endif if (expected) { int cpu = smp_processor_id(); mcheck_expected(cpu) = 0; mcheck_taken(cpu) = 1; return; } mchk_header = (struct el_common *)la_ptr; printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n", machine, vector, regs->pc, mchk_header->code); switch ((unsigned int) mchk_header->code) { /* Machine check reasons. Defined according to PALcode sources. */ case 0x80: reason = "tag parity error"; break; case 0x82: reason = "tag control parity error"; break; case 0x84: reason = "generic hard error"; break; case 0x86: reason = "correctable ECC error"; break; case 0x88: reason = "uncorrectable ECC error"; break; case 0x8A: reason = "OS-specific PAL bugcheck"; break; case 0x90: reason = "callsys in kernel mode"; break; case 0x96: reason = "i-cache read retryable error"; break; case 0x98: reason = "processor detected hard error"; break; /* System specific (these are for Alcor, at least): */ case 0x202: reason = "system detected hard error"; break; case 0x203: reason = "system detected uncorrectable ECC error"; break; case 0x204: reason = "SIO SERR occurred on PCI bus"; break; case 0x205: reason = "parity error detected by core logic"; break; case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break; case 0x207: reason = "non-existent memory error"; break; case 0x208: reason = "MCHK_K_DCSR"; break; case 0x209: reason = "PCI SERR detected"; break; case 0x20b: reason = "PCI data parity error detected"; break; case 0x20d: reason = "PCI address parity error detected"; break; case 0x20f: reason = "PCI master abort error"; break; case 0x211: reason = "PCI target abort error"; break; case 0x213: reason = "scatter/gather PTE invalid error"; break; case 0x215: reason = "flash ROM write error"; break; case 0x217: reason = "IOA timeout detected"; break; case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break; case 0x21b: reason = "EISA fail-safe timer timeout"; break; case 0x21d: reason = "EISA bus time-out"; break; case 0x21f: reason = "EISA software generated NMI"; break; case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break; default: reason = "unknown"; break; } printk(KERN_CRIT "machine check type: %s%s\n", reason, mchk_header->retry ? " (retryable)" : ""); dik_show_regs(regs, NULL); #if DEBUG_MCHECK > 1 { /* Dump the logout area to give all info. */ unsigned long *ptr = (unsigned long *)la_ptr; long i; for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { printk(KERN_CRIT " +%8lx %016lx %016lx\n", i*sizeof(long), ptr[i], ptr[i+1]); } } #endif } /* * The special RTC interrupt type. The interrupt itself was * processed by PALcode, and comes in via entInt vector 1. */ static void rtc_enable_disable(unsigned int irq) { } static unsigned int rtc_startup(unsigned int irq) { return 0; } struct irqaction timer_irqaction = { handler: timer_interrupt, flags: SA_INTERRUPT, name: "timer", }; static struct hw_interrupt_type rtc_irq_type = { typename: "RTC", startup: rtc_startup, shutdown: rtc_enable_disable, enable: rtc_enable_disable, disable: rtc_enable_disable, ack: rtc_enable_disable, end: rtc_enable_disable, }; void __init init_rtc_irq(void) { irq_desc[RTC_IRQ].status = IRQ_DISABLED; irq_desc[RTC_IRQ].handler = &rtc_irq_type; setup_irq(RTC_IRQ, &timer_irqaction); } /* Dummy irqactions. */ struct irqaction isa_cascade_irqaction = { handler: no_action, name: "isa-cascade" }; struct irqaction timer_cascade_irqaction = { handler: no_action, name: "timer-cascade" }; struct irqaction halt_switch_irqaction = { handler: no_action, name: "halt-switch" };