Lines Matching refs:used
10 * C11 with GNU extensions (aka "gnu11") is now used to build our
17 systemd-stable 250.3. The feature can still be used by explicitly
65 supposed to be used, and we already had a rule that with the
72 It is apparently used by the linker now.
97 file) may be used to override the "token" for the entries, for
146 paths and other settings used.
171 is mapped almost fully, with the exception of the UID subrange used
173 Unmapped UIDs may not be used for file ownership in the home
181 This range may be used for container managers that place container OS
207 * The <version> tag used in the name of libsystemd-shared.so and
251 cgroups are used in addition to trusted.delegate and
265 * In unit files the new %y/%Y specifiers can be used to refer to
405 /dev/disk/by-diskseq/<nr>, which may be used to reference block
430 added that can be used to wait for a specific network interface to be
436 * .netdev files now can be used to create virtual WLAN devices, and
457 BootFilename= settings can be used to configure the server address,
473 Option tpm2-pin= can be used in /etc/crypttab.
476 used, to ensure that communication between CPU and discrete TPM chips
509 used to set the default shell for user records and nspawn shell
526 "encrypted" like that cannot be used to trick TPM2 systems.
540 default compression algorithm used by systemd-journald and systemd-coredump.
609 exists the combination is used, otherwise the /var/ key only). The
648 systemd-nspawn's --image= switch), whether it can be used as portable
658 be used in portable service images to indicate which unit prefixes
669 HandleHibernateKeyLongPress= which may be used to configure actions
698 understood which may be used to override the hardware watchdog
702 /etc/systemd/system.conf and /etc/systemd/user.conf. It may be used
744 ProtectKernelLogs=yes can now be used.
782 used to configure additional mount options to pass to the kernel when
798 may now be used to unlock volumes set up this way.
810 than ECC, and hence are only used if ECC is not available.
834 be used to recognize when loopback block devices are reused for a
847 This is used to robustly generate boot entry titles for Windows.
851 reboot/poweroff/suspend/hibernate, and is supposed to be used to
868 which may be used to automatically save the current system time to
903 * systemd-analyze security gained a --profile= option that can be used
937 UseMTU= setting that may be used to control whether to apply the
1036 * systemd-nspawn gained a new switch --suppress-sync= which may be used
1047 uidmap/nouidmap options as last parameter. If "uidmap" is used the
1050 ownerships, even if user namespacing is used. This way
1086 itself may be used in place of a Type #2 Unified Kernel. This is
1122 may be used to set the boot menu time-out of the boot loader (for all
1143 mean that the machine-id used for boot loader entry installation is
1151 machine-id used during build included in paths. Using a "frozen"
1242 If the kernel and used file system support it, files are now
1243 internally owned by the "nobody" user (i.e. the user typically used
1245 mapped to the UID used locally on the system via the UID mapping
1285 supported if btrfs is used as file system inside the home area
1291 space among active home areas, in case the LUKS2 backends are used,
1295 necessary anymore. This behavior is only supported if btrfs is used
1301 may be used to wait until the rebalance run is complete.
1313 configuration of a single command to invoke, this maybe used to
1323 sd_event_source_set_ratelimit_expire_callback() that may be used to
1363 $SYSTEMD_IMPORT_SYNC, which may be used disable btrfs subvolume
1412 README.md file that explains the licenses used by source files in
1496 used to initialize important system parameters on first boot of
1518 new switch MakeDirectories= which may be used to create arbitrary
1529 value "auto". If used, a suitable matching partition on the booted OS
1579 where values up to 65535 are used.
1625 file, or a bind mount or symlink to one. This may be used to upload
1637 .network files which may be used to exclude foreign-created routing
1641 may be used to tweak whether to wait for only IPv4 or only IPv6
1659 The RelayAgentCircuitId= and RelayAgentRemoteId= settings may be used
1698 issue DHCP offers via broadcasting. This is used to ensure that s390
1703 resolve to the local IP addresses most likely used for outbound
1735 been added that may be used to restrict the network interfaces
1746 operators may be used to check if some field has some specific value
1764 that is used both to get the value (when no argument is given), and
1803 used FIDO2 token.
1824 now used by default if -U is used. Generally, it's a good idea to use
1832 removed, and -U should always be used (unless you use btrfs, where
1846 record format is supported this may also be used to define users with
1851 --with-varlink= which can be used to fine-tune the sources used for
1906 be used to explicit control whether the lock and key emoji (��) is
2025 be used to extend the /usr/ and /opt/ directory hierarchies at
2031 A new systemd-sysext tool can be used to merge, unmerge, list, and
2039 The SYSEXT_LEVEL= field in os-release(5) may be used to specify the
2042 * A new ExtensionImages= unit setting can be used to apply the same
2049 should be used to point to the operating system implementation.
2051 * A new configuration file /etc/veritytab may be used to configure
2057 used to configure dm-verity behaviour for the root device.
2070 * The fallback hostname that will be used by the system manager and
2119 is used at runtime when installed, but is not a hard runtime
2136 * The ConditionSecurity=tpm2 unit file setting may be used to check if
2139 * A new ConditionCPUFeature= has been added that may be used to
2146 unified v2 cgroup hierarchy is used, and "v1" means that legacy v1
2147 hierarchy or the hybrid hierarchy are used.
2171 point is used, there is no change in behaviour.
2181 * The ExecPaths= and NoExecPaths= settings may be used to specify
2269 mappings used with /dev/sgx device nodes. The previous behaviour can
2295 stub. This may be used by local clients to determine whether they are
2303 --trust-anchor=, --validate= that take booleans and may be used to
2348 * systemctl --check-inhibitors=true may now be used to obey inhibitors
2375 value "list", which may be used to show a brief table with known
2385 colors are used in output.
2389 used even if a pager is used, and older versions of less are not able
2390 to display these sequences correctly. SYSTEMD_URLIFY=0 may be used to
2404 could break cases where systemd-localed was used to configure the
2412 and are used internally by the bootloader (eg: uboot).
2415 spawned processes to the PID of the process itself. This may be used
2440 used to parse arrays of D-Bus signatures and D-Bus paths, in addition
2443 * bootctl will now report whether the UEFI firmware used a TPM2 device
2577 in case sd-device is used), to check whether the tag is set at the
2616 RootImage= and RootDirectory= are used, which means that with those
2729 used to add a human-readable textual description to such groups. This
2733 * The "systemd-dissect" tool that may be used to inspect OS disk images
2762 homectl's --recovery-key= option may be used to add a recovery key to
2777 * systemctl gained a new parameter --timestamp= which may be used to
2788 container. Similarly /run/host/notify is now used as the socket path
2792 of all relevant types which may be used by the container payload as
2856 * The unit file setting NUMAMask= gained a new "all" value: when used,
2861 secure way. It's supposed to be used to pass per-service secret data
2897 the partition drop-ins which may be used to format/LUKS
2923 configuration file setting which may be used to specify additional IP
2928 interfaces (and thus also via glibc NSS if nss-resolve is used) will
2964 of a song or film), but is now primarily used in various embedded
2985 * systemd-networkd's .netdev files may now be used to create "BareUDP"
3013 "service-log-target" may be used on services that implement the
3028 * The OS image dissection logic (as used by RootImage= in unit files or
3135 a command "bootctl set-default @current" may be used to make the
3208 added. They may be used to check whether a specific file system path
3213 has been added that may be used for simple environment checks. This
3233 * .service units gained a new setting RootHash= which may be used to
3235 specified in RootImage=. RootVerity= may be used to specify a path to
3254 TimeoutStartFailureMode=/TimeoutStopFailureMode= that may be used to
3260 notation when the 0o prefix is used and binary notation if the 0b
3261 prefix is used.
3289 from the documentation, but will now result in warnings when used,
3296 locally. It's in particular used by the NFS subsystem and in user
3325 added, which may be used to turn off automatic activation of swap
3361 The option can be used to configure the UNIX signal that the main
3418 DHCPv6Client= that may be used to turn off the DHCPv6 client even if
3422 which may be used to turn off use of the gateway information provided
3424 used to configure how to process leases that lack a lifetime option.
3458 supposed to be used by VM managers to trivially acquire a network
3486 public DNS servers are not used.
3493 file. And options ending in "-uplink" and "-stub" can now be used to
3529 clickable hyperlinks, and is turned off if a pager is used (since
3536 * journald.conf gained a new boolean setting Audit= that may be used to
3654 may be used to let the systemd user instance manage services that are
3657 * "bootctl" gained a new verb "reboot-to-firmware" that may be used
3661 be used to initialize the /etc/kernel/cmdline file of the image. It
3664 argument. The new option --delete-root-password may be used to unset
3666 may be used to control the shell to use for the root account. A new
3667 --force option may be used to override any already set settings with
3698 SetShowStatus() which may be used to control whether it shall show
3815 used for systems that use an A/B update scheme but ship images with
3847 used to securely manage home directories with built-in encryption.
3870 independent journal daemon, this functionality may be used to improve
3882 demand and will stop automatically when no longer used, minimizing
3888 * When systemd/PID 1 detects it is used in the initrd it will now boot
3942 MTU size to be used for routes generated from DHCPv4 leases.
3959 to be used.
3963 memory when they are freed. This concept is intended to be used for
4015 simple hashing scheme is used to give different interface names to
4059 option PermanentMACAddress= which may be used to check against the
4061 address is used.
4133 * The signal used in restart jobs (as opposed to e.g. stop jobs) may
4138 * "systemctl clean" may now be used also for socket, mount, and swap
4142 SystemdOptions. This may be used to configure systemd behaviour when
4145 cgroup hierarchy setup. 'bootctl systemd-efi-options' may be used to
4150 storage is not available and the kernel ring buffer is used for
4155 ratelimits to prevent runaway logging. (Normally this is only used
4160 <unit_type>.d/ (e.g. service.d/) that may be used to add configuration
4172 setting may used with the pam_systemd module to limit the duration
4194 security tokens that were used previously.
4246 service type" value used by the client.
4299 * The default value of the WatchdogSec= setting used in systemd
4305 is being used.
4309 * A configuration option -Duser-path= may be used to override the $PATH
4310 used by the user service manager. The default is again to use the same
4371 action is required. If an older kernel or libseccomp is used the old
4372 behaviour continues to be used. This change does not affect any
4398 DefaultMemoryLow= and DefaultMemoryMin=, which can be used to
4432 * libidn2 is used by default if both libidn2 and libidn are installed.
4438 Now, little-endian order is always used (CPUs 0–7 are described by
4442 The presentation format used for CPUAffinity= by "systemctl show" and
4449 format is 8191 (four digits), while the old format always used a very
4455 very rarely used.
4469 * A new setting NUMAPolicy= may be used to set process memory
4473 basis. The related setting NUMAMask= is used to specify NUMA node
4482 resources used by units. This information is also shown in "systemctl
4507 new verb may also be used to remove the state maintained on disk for
4540 not cached while the old cache heuristics are used positive answers.
4598 option MulticastIGMPVersion= may be used to change bridge's multicast
4603 PeerPort= may be used to configure the peer's IP port.
4639 * The order of entries is $PATH used by the user manager instance was
4646 the kernel command line in the format used by Dracut.
4676 which may be used to securely change the brightness of a kernel
4689 used to configure device timeout for the hibernation device.
4839 the interface name is used as the basis for persistent seed for MAC
4844 MACAddressPolicy=random may be used to force randomized MACs and
4848 clarify what policy is followed and which attributes are used.
4850 may be used to view this.
4889 * A new unit setting ProtectHostname= may be used to prevent services
4893 * A new unit setting NetworkNamespacePath= may be used to specify a
4898 have an effect on .socket units: when used the listening socket is
4907 OnTimezoneChange= which may be used to also trigger a unit when the
4913 used to conditionalize a unit based on installed system
4914 RAM. ConditionCPUs= may be used to conditionalize a unit based on
4931 * systemd-networkd recognizes a new operation state 'enslaved', used
4934 state used for the bond or bridge master interface when one of the
4953 may be used to cause autonomous and onlink prefixes received in IPv6
4957 file settings may be used to tweak bridge behaviour.
4959 * The new TripleSampling= option in .network files may be used to
4963 used to point to private or preshared key for a WireGuard interface.
4970 contents of directory. This may be used to temporarily exclude
5007 be used in production yet.
5011 --inaccessible=/Inaccessible= may be used to mask parts of the file
5012 system tree, --console=/--pipe may be used to configure how standard
5017 * systemd-analyze cat-config may be used to gather and display
5022 --iterations= which may be used to show a maximum number of iterations
5036 detected by systemd-detect-virt (and may also be used in
5048 /run/systemd/reboot-to-boot-loader-entry, may be used by alternative
5052 * systemctl can be used to request a reboot into the boot loader menu
5118 during compilation, which is intended to be used by distributions to
5133 and used by default in 99-default.link (the fallback configuration
5154 used for side-channel attacks.
5246 used for loading units anymore and the unit file must be found in
5292 both in memory and in performance than it used to be. Programs that
5297 any shared library used by any shared library they use and so on).
5299 decide. However, given reports that ~300K file descriptors are used
5352 * The new "MemoryMin=" unit file property may now be used to set the
5370 use. sd_bus_error_move() may be used to efficiently move the contents
5373 be used to control whether a bus connection object is automatically
5388 signal used when regular termination (i.e. SIGTERM) does not suffice.
5389 Similarly, the signal used when aborting a program in case of a
5404 option ReadEtcHosts= which may be used to turn off processing and
5434 * .preset files (as read by 'systemctl preset') may now be used to
5445 it is neither used nor maintained.
5448 LogsDirectory=, ConfigurationDirectory= settings are used in a
5453 are used. Note that these options may be used multiple times per
5463 * .link files may now be used to configure the equivalent to the
5476 * A new tool systemd-id128 has been added that can be used to determine
5504 understood which may be used to influence the core_pattern PID 1
5547 options may now be used to configure the log rate limiting applied by
5576 the concept only exists on cgroup v1) and apparently wasn't used.
5601 continue to be used.
5626 net.naming-scheme= kernel command line switch, which may be used to
5659 user namespacing is used: suddenly PrivateDevices= succeeds setting
5752 scheme used for the first eight NPAR partitions. Previously those
5753 devices were not renamed and the kernel default (eth<n>) was used.
5758 not renamed and the kernel default (eth<n>) was used.
5771 last assignment was used. So, if distribution packagers or
5775 * When OnFailure= is used in combination with Restart= on a service
5791 * systemctl disable/unmask/preset/preset-all cannot be used with
5870 be used to turn off acquisition of new privileges system-wide
5917 * Units gained a new load state "bad-setting", which is used when a
5943 setting the MTU used by IPv6 explicitly as well as a new MTUBytes=
5964 * PID 1 learnt a new bus call GetUnitByControlGroup() which may be used
5967 * systemd-analyze gained a new verb "cat-config", which may be used to
5989 unit names of NTP client services. The list is used by
5995 --no-new-privileges= switch may be used to control the
6023 binary, which may be used to dump all supported D-Bus properties.
6028 sd_bus_slot_set_floating()/sd_bus_slot_get_floating() may be used to
6034 sd_bus_open_system_with_description() may be used to allocate bus
6072 earlier PAM modules. The data in these fields is used to initialize
6089 PrivateDevices=, ProtectSystem=, …) are used. This option is hence
6092 where this is now used by default.
6103 * Systemd now emits warnings whenever .include syntax is used.
6149 used. On very resource constrained systems or when support for old
6150 kernels is a necessity, -Dmemory-accounting-default=false can be used
6180 %sysusers_create_package should be used.
6194 positional arguments when the new --inline switch is used.
6202 paths that are compiled into systemd (which can be used with
6220 sd_bus_get_n_queued_write — may be used to check the number of
6225 which can be used to migrate foreign processes to scope and service
6234 * A new TemporaryFileSystem= setting can be used to mask out part of
6240 ProtectHome=tmpfs may now be used to hide user home and runtime
6251 be used in ConditionVirtualization=.
6255 * A new -Dsplit-bin= build configuration switch may be used to specify
6263 * A new -Dok-color= build configuration switch may be used to change
6298 Up/Down key events so that they can be used for scrolling.
6405 used this refers to the default event loop object of the calling
6409 SD_BUS_DEFAULT_USER, SD_BUS_DEFAULT_SYSTEM that may be used to refer
6415 sd_event_source_{get|set}_io_fd_own(). This may be used to request
6437 otherwise. Option --case-sensitive=yes|no can be used to override
6573 files. This is intended to be used by drop-ins under /usr/lib/.
6584 the escaped sysfs path of the device is automatically used as the
6605 new option StandardInput=data may be used to configure textual or
6609 * StandardInput=, StandardOutput= and StandardError= may now be used to
6614 tweaking the garbage collection logic for units. It may be used to
6619 * "machinectl bind" may now be used to bind mount non-directories
6678 option, which may be used to make a container join an existing
6748 used to change those values.
6834 used the STDIN/STDOUT/STDERR file descriptors passed to systemd-run
6876 ordered before all text logins, and may be used to order services
6917 used to control how the kernel keyring is set up for executed
7018 section [IPv6Prefix] may be used to configure the ranges to
7177 where used in the unit files), but these specifiers were influenced
7216 ensure that all dependencies of type BindsTo= (when used in
7230 used to restrict access to the various process namespace types the
7231 Linux kernel provides. Specifically, it may be used to take away the
7263 x-systemd.mount-timeout= may be used to configure the maximum
7274 x-systemd.after= and x-systemd.before= may be used to explicitly
7345 be used to dissect disk images the same way as systemd-nspawn does
7347 used to mount disk images with complex partition setups (including
7386 way. When these options are used, arbitrary host or service files and
7405 optional boolean parameter or the special value "state". If used the
7407 "systemd.volatile" is used, the root directory will be mounted as
7409 "systemd.volatile=state" is used, the root directory will be mounted
7455 RootDirectory= or RootImage= is used for the service, as these mounts
7489 configuration load time. They may be used to add environment
7540 particular when exotic languages for these call-outs are used. In
7543 * The new RemoveIPC= option can be used to remove IPC objects owned by
7546 * The new ProtectKernelModules= option can be used to disable explicit
7554 * The new ProtectKernelTunables= option can be used to disable
7559 * The new ProtectControlGroups= option can be used to disable write
7591 * The new MemorySwapMax= option can be used to limit the maximum swap
7607 and allows the automount logic to be used dynamically from the
7620 * /efi will be used as the mount point of the EFI boot partition, if
7623 /boot will be used as before. This makes it easier to automatically
7624 mount the EFI partition on systems where /boot is used for something
7639 used.
7656 * journalctl --root=… can be used to peruse the journal in the
7662 ID_INPUT_TRACKBALL, used in addition to ID_INPUT_MOUSE to identify
7744 $SYSTEMD_NSPAWN_SHARE_NS_UTS may be used to control the unsharing of
7759 sd_bus_get_exit_on_disconnect(). They may be used to make a
7781 /etc/systemd/system.conf which may be used to configure the precise
7894 assigned value: if the character '+' is used the specified command
7919 syntax for time ranges. Example: "4..7:10" may now be used for
7928 used on block and character device nodes, UNIX sockets and FIFOS as
7942 the device and inode number of the file descriptor used for
7943 stdout/stderr. This may be used by invoked programs to detect whether
7947 one example, this is now used by glib's logging primitives.
7984 scheduling may otherwise be used to easily freeze the system.
7987 value. This may be used for requesting that the system manager inside
8007 summary of the used DNS configuration with per-interface information
8029 used to deliver link-local address information (as this implies
8055 * "systemctl edit" may now be used to create new unit files by
8063 file. It can be used in lieu of %systemd_requires in packages which
8203 lldp" command may be used to list information gathered. "networkctl
8235 can be used to open journal files using file descriptors instead of
8237 deprecated, sd_journal_open_directory_fd() should be used instead
8260 by generator tools. Similarly, a new unit type "transient" is used
8264 * A new command "systemctl revert" has been added that may be used to
8336 CapabilityBoundingSet= should be used instead.
8384 are used to qualify single-label names, the latter are used purely
8417 logic is used. Since the limit is now honoured (see above) its
8444 that may be used to set the machine ID in /etc/machine-id if it is
8511 * A new service setting RuntimeMaxSec= has been added that may be used
8520 * The process resource limit settings in service units may now be used
8529 functions may be used directly as parameters to the cleanup
8631 hierarchy when used on a btrfs file system with quota
8701 * The compression framing format used by the journal or
8729 feature turned out to be little useful and little used, and
8734 have been used only very sparingly to our knowledge and
8737 and commonly used. Moreover, they were only half-way
8818 cgroup, which can then be used in firewall rules and traffic
8830 used as a substitute for 'systemd-notify --booted'.
8930 * The "ask-password" framework used to query for LUKS harddisk
8936 available only when Plymouth was used; this moves the
8944 gdm-autologin is used.
9038 session buses, if used with dbus-1.10 (and enabled via dbus
9064 work is 4.2. Note that when the unified hierarchy is used
9073 that encapsulates PID 1 of the system. It may be used to
9127 host and is used by default. Hence, 'machinectl shell' can
9128 be used as replacement for 'su -' which spawns a session as
9155 "--message=" option which may be used to set a free-text
9276 or should be used to work around such bugs.
9420 automatically after 2 minutes of not being used. This should
9462 "no". This means if networkd is used for an interface it is
9481 in which case the pipes used for stdin and stdout are passed
9525 can be used to reboot into the EFI firmware setup, if that
9539 * An EFI kernel stub has been added that may be used to create
9635 lost on container termination. This switch can also be used
9728 been used in the systemd context as generic term for both
9737 to make use of this, thus allowing it to be used for raw
9757 is used on COW file systems. It degrades btrfs' data
9774 passed. This is now used by journald to ensure that the
9956 * systemctl gained a new "edit" command. When used on a unit
9970 name to the used gateways, regardless which ones are
9993 the traditional auditd instead, which can be used in
10007 library will be used in a future version of networkd to
10084 bluetooth, …) is used.
10087 added. When used on systems where /etc is read-only during
10120 used to assign SMACK labels to files.
10176 operation in such a case. This is now used by default to
10192 used to resume from hibernation in the initramfs. A
10305 /etc. When used only hardware database entries stored in
10306 /usr will be used, and any user database entries in /etc are
10322 * When the watchdog logic is used for a service (WatchdogSec=)
10397 NSS module "nss-resolve" has been added which can be used
10409 "systemd-resolve-host" has been added that may be used to
10412 on whether classic DNS or LLMNR is used as transport. In the
10493 library is supposed to be used later on for implementing a
10503 rsyslog (which appears to be the most commonly used syslog
10529 boot. Alternatively it may also be used to provision these
10611 [DHCP] and is now also used by the DHCPv6 client. Existing
10681 that may be used by services that need to make they run and
10753 only be used for ports using the same HW address, hence the need
10768 machines has been extended so that it may be used to
10875 used for a service (which makes /dev/log itself unavailable,
10929 the hardware and usually are used to manage the unprivileged
10971 devices is no longer used. The "disk" group is now used
11020 units, which may be used to specify a kernel reboot argument
11024 units which may be used to specify an operation to trigger
11056 sections whose names begin with "X-". This may be used to maintain
11150 units on all local containers, when used with the
11206 * PrivateDevices=, PrivateNetwork= and PrivateTmp= is now used
11241 been last triggered. This information is then used on next
11275 RuntimeDirectoryMode= have been added that may be used to
11342 shared resources used by both the system and unprivileged
11365 --property=BlockIOWeight=10 updatedb" may be used to run
11464 --network-bridge= is used, and with "ve-" if --network-veth
11465 is used. This way, it is easy to distinguish these cases on
11484 anymore. Drop-in files in .d directories should be used instead.
11500 be used to configure local network interfaces statically or
11546 * When the User= switch is used in a unit file, also
11593 small DHCPv4 client-side implementation. This is used by
11627 * machinectl gained a new "reboot" command that may be used to
11666 namespace, if PrivateNetwork= or PrivateTmp= are used.
11688 used in unit files for PID 1. This is because NSS calls are
11711 * tmpfiles gained a new "--boot" option. When this is not used,
11775 and should not be used in production. Note: if "--enable-kdbus"
11832 down the scope. This may be used to hook manager logic into
11874 * systemd-nspawn gained a new --keep-unit which may be used
11960 protected. When this is used (and the kernel is new enough)
11979 may be used to change the owner/group/access mode of a file
12158 * "journalctl -b" may now be used to look for boot output of a
12163 cursor string the last shown log line. This may then be used
12167 * "journalctl --force" may now be used to force regeneration
12190 * A new RPM macro has been added that may be used to apply
12216 completely silent shutdown when used.
12248 which then maybe used to organize them, or kill them
12251 Slice units may be used to partition system resources in an
12283 may be used by virtualization managers to register local
12305 * A new tool "systemd-run" has been added which can be used to
12427 nspawn). sd_login_monitor can now be used to watch
12444 be used to easily run nspawn containers as system
12457 added that may be used to configure which kernel operation
12496 in. This is useful for systems where systemd is used as
12515 matching logic. This can be used to express more complex
12662 * There's a new remote-fs-setup.target unit that can be used
12715 each time they are used. By assigning Environment= the empty
12798 information from the EFI variables, if the used boot loader
12813 used by applications as asynchronous notification for
12851 like timedated, localed, hostnamed, and can be used by
12869 with a new mode "--irreversible" which may be used to queue
12871 job queuing. This is by default used to make shutdown
12885 * A new tool systemd-activate has been added which can be used
12907 to the journal, and nothing else. Previously, we used the
12910 already used by systemd-journal-gatewayd to ensure this
12996 * In service files %U may be used as specifier that is
13001 may be used to set up a simple containerized server system
13022 type of the system. This can be used to determine whether
13033 may be used to conditionalize a unit depending on whether an
13037 * systemctl gained a new "is-failed" verb that may be used in
13042 globbing, and can hence be used to easily read a number of
13071 devices might be marked as well. This may be used to
13317 will be used to implement live log synchronization in both
13372 system size is used. Use "systemctl status
13442 journald.conf which may be used to control how user journals
13555 * journalctl gained the new --verify switch that can be used
13569 useful for clusters where a single OS image is used to
13587 may be used to group services in a natural way.
13589 * "systemctl enable" may now be used to enable instances of
13656 * systemctl -t can now be used to filter by unit load state.
13679 * Three new specifiers may be used in unit files: %u, %h, %s
13693 be used to apply deny lists or allow lists to system calls. This is
13904 should be used to create dead device nodes as workarounds for broken
13909 used to subscribe to events.
13941 to be used as drop-in files.
14000 the host system can be used to introspect initrd services,
14097 * We now refuse non-UTF8 strings used in various configuration
14233 teach XOrg udev display enumeration. This is used by display
14285 remote mounts and may be used to start services before all
14328 --with-rootprefix= to follow the naming used by udev and