Lines Matching refs:netdev_dbg

55 		netdev_dbg(dev->net, "Link Status is: %d\n", link);  in asix_status()
183 netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", in ax88172_link_reset()
252 netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n", in ax88172_bind()
389 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); in ax88772_hw_reset()
437 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); in ax88772_hw_reset()
454 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", in ax88772_hw_reset()
458 netdev_dbg(dev->net, in ax88772_hw_reset()
482 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); in ax88772a_hw_reset()
519 netdev_dbg(dev->net, "Write BQ setting failed: %d\n", in ax88772a_hw_reset()
532 netdev_dbg(dev->net, in ax88772a_hw_reset()
555 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); in ax88772a_hw_reset()
581 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", in ax88772a_hw_reset()
585 netdev_dbg(dev->net, in ax88772a_hw_reset()
624 netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n", in ax88772_suspend()
859 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", in ax88772_bind()
882 netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret); in ax88772_bind()
897 netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret); in ax88772_bind()
980 netdev_dbg(dev->net, "marvell_phy_init()\n"); in marvell_phy_init()
983 netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg); in marvell_phy_init()
991 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg); in marvell_phy_init()
1000 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg); in marvell_phy_init()
1010 netdev_dbg(dev->net, "rtl8211cl_phy_init()\n"); in rtl8211cl_phy_init()
1031 netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg); in marvell_led_status()
1047 netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg); in marvell_led_status()
1064 netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret); in ax88178_reset()
1068 netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status); in ax88178_reset()
1073 netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret); in ax88178_reset()
1079 netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom); in ax88178_reset()
1090 netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode); in ax88178_reset()
1100 netdev_dbg(dev->net, "gpio phymode == 1 path\n"); in ax88178_reset()
1107 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); in ax88178_reset()
1156 netdev_dbg(dev->net, "ax88178_link_reset()\n"); in ax88178_link_reset()
1177 netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", in ax88178_link_reset()
1228 netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu); in ax88178_change_mtu()
1266 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); in ax88178_bind()