Lines Matching refs:ntuple

224 characteristics. They are enabled through ethtool's ntuple interface. To enable
227   # ethtool -K <ethX> ntuple <off|on>
229 NOTE: When you disable ntuple filters, all the user programmed filters are
231 when ntuple is re-enabled.
391 - aRFS requires that ntuple filtering is enabled via ethtool.
400 - aRFS and ethtool's ntuple interface both use the device's Flow Director. aRFS
401   and ntuple features can coexist, but you may encounter unexpected results if
402   there's a conflict between aRFS and ntuple requests. See "Intel(R) Ethernet
407 1. Enable the Intel Ethernet Flow Director and ntuple filters using ethtool.
411    # ethtool -K <ethX> ntuple on
443   # ethtool -K <ethX> ntuple off
445 NOTE: This command will disable ntuple filters and clear any aRFS filters in