Lines Matching refs:be

38     description: boolean, regulator should never be disabled
46       This property is intended to only be used for regulators where
55     description: allow the regulator performance level to be configured
60       disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
102       for the regulator at run-time.  Elements may be specified in any order.
123       hardware performs emergency shutdown. Zero can be passed to disable
124       protection and value '1' indicates that protection should be enabled but
125       limit setting can be omitted.
130       Zero can be passed to disable error detection and value '1' indicates
131       that detection should be enabled but limit setting can be omitted.
135       is assumed still to be functional but approaching limit where it gets
136       damaged. Recovery actions should be initiated. Zero can be passed to
138       be enabled but limit setting can be omitted.
142       hardware performs emergency shutdown. Zero can be passed to disable
143       protection and value '1' indicates that protection should be enabled but
144       limit setting can be omitted. Limit is given as microvolt offset from
150       Zero can be passed to disable error detection and value '1' indicates
151       that detection should be enabled but limit setting can be omitted. Limit
156       is assumed still to be functional but approaching limit where it gets
157       damaged. Recovery actions should be initiated. Zero can be passed to
159       be enabled but limit setting can be omitted. Limit is given as microvolt
164       hardware performs emergency shutdown. Zero can be passed to disable
165       protection and value '1' indicates that protection should be enabled but
166       limit setting can be omitted. Limit is given as microvolt offset from
172       Zero can be passed to disable error detection and value '1' indicates
173       that detection should be enabled but limit setting can be omitted. Limit
178       hardware is assumed still to be functional but approaching limit where
179       it gets damaged. Recovery actions should be initiated. Zero can be passed
181       be enabled but limit setting can be omitted. Limit is given as microvolt
186       hardware performs emergency shutdown. Zero can be passed to disable
187       protection and value '1' indicates that protection should be enabled but
188       limit setting can be omitted.
193       Zero can be passed to disable error detection and value '1' indicates
194       that detection should be enabled but limit setting can be omitted.
198       hardware is assumed still to be functional but approaching limit where it
199       gets damaged. Recovery actions should be initiated. Zero can be passed to
201       be enabled but limit setting can be omitted.
214       is 2-way - all coupled regulators should be linked with each other.
215       A regulator should not be coupled with its supplier.
228       that can be changed safely in a single step.
243         description: regulator should be on in suspend state.
247         description: regulator should be off in suspend state.
251         description: minimum voltage may be set in suspend state.
254         description: maximum voltage may be set in suspend state.
257         description: the default voltage which regulator would be set in
264           in suspend can be changed in runtime.