Lines Matching refs:be

8 - compatible : Should be "altr,socfpga-ecc-manager"
9 - #address-cells: must be 1
10 - #size-cells: must be 1
17 - compatible : Should be "altr,socfpga-l2-ecc"
19 - interrupts : Should be single bit error interrupt, then double bit error
24 - compatible : Should be "altr,socfpga-ocram-ecc"
27 - interrupts : Should be single bit error interrupt, then double bit error
58 - compatible : Should be "altr,socfpga-a10-ecc-manager"
61 - #address-cells: must be 1
62 - #size-cells: must be 1
63 - interrupts : Should be single bit error interrupt, then double bit error
66 - #interrupt-cells : must be set to 2.
73 - compatible : Should be "altr,socfpga-a10-l2-ecc"
75 - interrupts : Should be single bit error interrupt, then double bit error
80 - compatible : Should be "altr,socfpga-a10-ocram-ecc"
82 - interrupts : Should be single bit error interrupt, then double bit error
87 - compatible      : Should be "altr,socfpga-eth-mac-ecc"
90 - interrupts      : Should be single bit error interrupt, then double bit error
95 - compatible      : Should be "altr,socfpga-nand-ecc"
98 - interrupts      : Should be single bit error interrupt, then double bit error
103 - compatible      : Should be "altr,socfpga-dma-ecc"
106 - interrupts      : Should be single bit error interrupt, then double bit error
111 - compatible      : Should be "altr,socfpga-usb-ecc"
114 - interrupts      : Should be single bit error interrupt, then double bit error
119 - compatible      : Should be "altr,socfpga-qspi-ecc"
122 - interrupts      : Should be single bit error interrupt, then double bit error
127 - compatible      : Should be "altr,socfpga-sdmmc-ecc"
130 - interrupts      : Should be single bit error interrupt, then double bit error
238 requires access to registers that can only be read from Secure Monitor
244 - compatible : Should be "altr,socfpga-s10-ecc-manager"
247 - interrupts : Should be single bit error interrupt.
249 - #interrupt-cells : must be set to 2.
250 - #address-cells: must be 1
251 - #size-cells: must be 1
258 - compatible : Should be "altr,sdram-edac-s10"
259 - interrupts : Should be single bit error interrupt.
263 - compatible      : Should be "altr,socfpga-s10-ocram-ecc"
266 - interrupts      : Should be single bit error interrupt.
270 - compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
273 - interrupts      : Should be single bit error interrupt.
277 - compatible      : Should be "altr,socfpga-s10-nand-ecc"
280 - interrupts      : Should be single bit error interrupt.
284 - compatible      : Should be "altr,socfpga-s10-dma-ecc"
287 - interrupts      : Should be single bit error interrupt.
291 - compatible      : Should be "altr,socfpga-s10-usb-ecc"
294 - interrupts      : Should be single bit error interrupt.
298 - compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
301 - interrupts      : Should be single bit error interrupt for port A