Lines Matching refs:signal

24                 IRIG  adjustments from external IRIG-B signal
25                 DCF   adjustments from external DCF signal
32 		input signal.
35                 10Mhz  signal is used as the 10Mhz reference clock
36                 PPS1   signal is sent to the PPS1 selector
37                 PPS2   signal is sent to the PPS2 selector
38                 TS1    signal is sent to timestamper 1
39                 TS2    signal is sent to timestamper 2
40                 TS3    signal is sent to timestamper 3
41                 TS4    signal is sent to timestamper 4
42                 IRIG   signal is sent to the IRIG-B module
43                 DCF    signal is sent to the DCF module
44                 FREQ1  signal is sent to frequency counter 1
45                 FREQ2  signal is sent to frequency counter 2
46                 FREQ3  signal is sent to frequency counter 3
47                 FREQ4  signal is sent to frequency counter 4
48                 None   signal input is disabled
54 Description:	(RO) Set of available sources for a SMA output signal.
118 Description:	(RO) Specifies the signal duty cycle as a percentage from 1-99.
123 Description:	(RO) Specifies the signal period in nanoseconds.
128 Description:	(RO) Specifies the signal phase offset in nanoseconds.
133 Description:	(RO) Specifies the signal polarity, either 1 or 0.
138 Description:	(RO) Either 0 or 1, showing if the signal generator is running.
143 Description:	(RO) Shows the time in <sec>.<nsec> that the signal generator
146 What:		/sys/class/timecard/ocpN/genX/signal
149 Description:	(RW) Used to start the signal generator, and summarize
152 		The signal generator may be started by writing the signal
153 		period, followed by the optional signal values.  If the
159 		echo 500000000 > signal       # 1/2 second period
160 		echo 1000000 40 100 > signal
161 		echo 0 > signal               # turn off generator
173 Description:	(RO) Indicates whether a valid GNSS signal is received,
174 		or when the signal was lost.
185 		of the IRIG-B output signal: B00<n>
208 Description:	(RW) These attributes specify the direction of the signal
209 		on the associated SMA connectors, and also the signal sink
215 		The signal direction may be changed (if supported) by
216 		prefixing the signal list with either "in:" or "out:".
219 		The output signal may be changed by writing one of the listed
236 Description:	(RW) The incoming GNSS signal is in UTC time, and the NMEA