Lines Matching refs:speed
7 PCI-based EHCI USB controllers (i.e., high-speed USB-2.0
9 "companion" full/low-speed USB-1.1 controllers. When a
10 high-speed device is plugged in, the connection is routed
11 to the EHCI controller; when a full- or low-speed device
15 Sometimes you want to force a high-speed device to connect
16 at full speed, which can be accomplished by forcing the
23 For example: To force the high-speed device attached to
24 port 4 on bus 2 to run at full speed::
28 To return the port to high-speed operation::
39 cannot be used to force a port on a high-speed hub to
40 connect at full speed.