Lines Matching refs:files

8 		The files are read only.
15 Description:	These files show with which CPLD versions have been burned
18 		The files are read only.
28 		The files are read only.
34 Description:	These files show with which CPLD versions have been burned
37 		The files are read only.
43 Description:	These files enable and disable the access to the JTAG domain.
66 Description:	These files allow asserting system power cycling, switching
79 		The files are write only.
93 Description:	These files show the system reset cause, as following: power
101 		The files are read only.
110 Description:	These files show the system reset cause, as following: ComEx
117 		The files are read only.
123 Description:	These files show with which CPLD versions have been burned
126 		The files are read only.
137 Description:	These files show the system reset cause, as following:
145 		The files are read only.
152 Description:	These files show system static topology identification
156 		The files are read only.
165 Description:	These files show the system reset causes, as following: reset
171 		The files are read only.
221 Description:	These files show with which CPLD part numbers and minor
225 		The files are read only.
233 Description:	The files represent BIOS statuses:
248 		The files are read only.
261 Description:	These files allow line cards enable state control.
266 		The files are read/write.
279 Description:	These files switching line cards power on and off.
284 		The files are read/write.
297 Description:	These files clear line card reset bit enforced by ASIC, when it
303 		The files are write only.
341 Description:	These files switching power supply units on and off.
346 		The files are write only.
374 Description:	These files show with which CPLD major and minor versions
377 		The files are read only.
385 Description:	These files show with which FPGA major and minor versions
388 		The files are read only.
414 Description:	These files show the line reset cause, as following: power
421 		The files are read only.
428 Description:	These files allow CPLD and FPGA burning. Value 1 in file means burning
430 		If the system is in locked-down mode writing these files will
432 		The purpose of these files to allow line card CPLD and FPGA
435 		The files are read/write.
442 Description:	These files allow to power on/off all QSFP ports and whole line card.
445 		The files are read/write.
452 Description:	These files allow gearboxes and FPGA SPI flash burning.
454 		If the system is in locked-down mode writing these files will
456 		The purpose of these files to allow line card Gearboxes and FPGA
466 Description:	These files provide the maximum powered required for line card
469 		The files are read only.
481 		The files are read/write.
493 		The files are read/write.
505 		The files are read only.
521 Description:	These files allow to each of ASICs by writing 1.
523 		The files are write only.
560 Description:	These files aim to monitor the status of the External Root of Trust (EROT)
570 		The files are read only.
579 Description:	These files aim to perform External Root of Trust (EROT) recovery
590 		The files are read/write.
597 Description:	These files allow access to External Root of Trust (EROT) for reset
602 		The files are read/write.
630 Description:	These files are related to clock boards status in system.
635 		The files are read only.
672 Description:	These files show with which CPLD part numbers, version and minor
676 		The files are read only.