Lines Matching refs:_BITUL
7 #define SPI_CPHA _BITUL(0) /* clock phase */
8 #define SPI_CPOL _BITUL(1) /* clock polarity */
16 #define SPI_CS_HIGH _BITUL(2) /* chipselect active high? */
17 #define SPI_LSB_FIRST _BITUL(3) /* per-word bits-on-wire */
18 #define SPI_3WIRE _BITUL(4) /* SI/SO signals shared */
19 #define SPI_LOOP _BITUL(5) /* loopback mode */
20 #define SPI_NO_CS _BITUL(6) /* 1 dev/bus, no chipselect */
21 #define SPI_READY _BITUL(7) /* slave pulls low to pause */
22 #define SPI_TX_DUAL _BITUL(8) /* transmit with 2 wires */
23 #define SPI_TX_QUAD _BITUL(9) /* transmit with 4 wires */
24 #define SPI_RX_DUAL _BITUL(10) /* receive with 2 wires */
25 #define SPI_RX_QUAD _BITUL(11) /* receive with 4 wires */
26 #define SPI_CS_WORD _BITUL(12) /* toggle cs after each word */
27 #define SPI_TX_OCTAL _BITUL(13) /* transmit with 8 wires */
28 #define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */
29 #define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */
30 #define SPI_RX_CPHA_FLIP _BITUL(16) /* flip CPHA on Rx only xfer */
40 #define SPI_MODE_USER_MASK (_BITUL(17) - 1)