2248 	u8 bval;  in data_io_transfer()  local
2413 		bval = (io_dir & DMACMD_DIR) ? SCMD_FIFO_IN : SCMD_FIFO_OUT;  in data_io_transfer()
2414 		DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, bval);  in data_io_transfer()
2563 	u8 bval;  in msgin_set_sync()  local
2582 	bval = 0;  in msgin_set_sync()
2583 	while (bval < 7 && (srb->msgin_buf[3] > clock_period[bval]  in msgin_set_sync()
2585 			    clock_period[bval]))  in msgin_set_sync()
2586 		bval++;  in msgin_set_sync()
2587 	if (srb->msgin_buf[3] < clock_period[bval])  in msgin_set_sync()
2590 			clock_period[bval] << 2);  in msgin_set_sync()
2591 	srb->msgin_buf[3] = clock_period[bval];  in msgin_set_sync()
2593 	dcb->sync_period |= ALT_SYNC | bval;  in msgin_set_sync()
2937 			u8 bval = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);  in disconnect()  local
2941 			if (bval & 0x40) {  in disconnect()
2944 					bval);  in disconnect()
3418 	u8 bval;  in set_basic_config()  local
3422 		bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;  in set_basic_config()
3424 		bval = PHASELATCH | INITIATOR | BLOCKRST;  in set_basic_config()
3426 	DC395x_write8(acb, TRM_S1040_SCSI_CONFIG0, bval);  in set_basic_config()
4132 	u8 bval;  in adapter_print_config()  local
4134 	bval = DC395x_read8(acb, TRM_S1040_GEN_STATUS);  in adapter_print_config()
4136 		((bval & WIDESCSI) ? "(Wide) " : ""));  in adapter_print_config()
4137 	if (!(bval & CON5068))  in adapter_print_config()
4138 		printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");  in adapter_print_config()
4139 	if (!(bval & CON68))  in adapter_print_config()
4140 		printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)");  in adapter_print_config()
4141 	if (!(bval & CON50))  in adapter_print_config()
4143 	if ((bval & (CON5068 | CON50 | CON68)) ==  in adapter_print_config()
4146 	bval = DC395x_read8(acb, TRM_S1040_GEN_CONTROL);  in adapter_print_config()
4148 	if (bval & DIS_TERM)  in adapter_print_config()
4151 		if (bval & AUTOTERM)  in adapter_print_config()
4153 		if (bval & LOW8TERM)  in adapter_print_config()
4155 		if (bval & UP8TERM)  in adapter_print_config()