120 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_read_phy_reg_mdic()
146 		hw_dbg("MDI Read did not complete\n");  in igb_read_phy_reg_mdic()
151 		hw_dbg("MDI Error\n");  in igb_read_phy_reg_mdic()
176 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_write_phy_reg_mdic()
203 		hw_dbg("MDI Write did not complete\n");  in igb_write_phy_reg_mdic()
208 		hw_dbg("MDI Error\n");  in igb_write_phy_reg_mdic()
249 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_phy_reg_i2c()
253 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_phy_reg_i2c()
279 		hw_dbg("PHY I2C Address %d is out of range.\n",  in igb_write_phy_reg_i2c()
306 		hw_dbg("I2CCMD Write did not complete\n");  in igb_write_phy_reg_i2c()
310 		hw_dbg("I2CCMD Error bit set\n");  in igb_write_phy_reg_i2c()
337 		hw_dbg("I2CCMD command address exceeds upper limit\n");  in igb_read_sfp_data_byte()
358 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_sfp_data_byte()
362 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_sfp_data_byte()
469 			hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_82580()
611 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88()
689 			hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
705 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
735 		hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_igp()
752 			hw_dbg("Error Disabling LPLU D3\n");  in igb_copper_link_setup_igp()
760 		hw_dbg("Error Disabling LPLU D0\n");  in igb_copper_link_setup_igp()
878 	hw_dbg("Reconfiguring auto-neg advertisement params\n");  in igb_copper_link_autoneg()
881 		hw_dbg("Error Setting up Auto-Negotiation\n");  in igb_copper_link_autoneg()
884 	hw_dbg("Restarting Auto-Neg\n");  in igb_copper_link_autoneg()
904 			hw_dbg("Error while waiting for autoneg to complete\n");  in igb_copper_link_autoneg()
963 	hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);  in igb_phy_setup_autoneg()
967 		hw_dbg("Advertise 10mb Half duplex\n");  in igb_phy_setup_autoneg()
973 		hw_dbg("Advertise 10mb Full duplex\n");  in igb_phy_setup_autoneg()
979 		hw_dbg("Advertise 100mb Half duplex\n");  in igb_phy_setup_autoneg()
985 		hw_dbg("Advertise 100mb Full duplex\n");  in igb_phy_setup_autoneg()
991 		hw_dbg("Advertise 1000mb Half duplex request denied!\n");  in igb_phy_setup_autoneg()
995 		hw_dbg("Advertise 1000mb Full duplex\n");  in igb_phy_setup_autoneg()
1049 		hw_dbg("Flow control param set incorrectly\n");  in igb_phy_setup_autoneg()
1058 	hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);  in igb_phy_setup_autoneg()
1097 		hw_dbg("Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1100 			hw_dbg("Error Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1113 		hw_dbg("Valid link established!!!\n");  in igb_setup_copper_link()
1117 		hw_dbg("Unable to establish link!!!\n");  in igb_setup_copper_link()
1163 	hw_dbg("IGP PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_igp()
1168 		hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");  in igb_phy_force_speed_duplex_igp()
1175 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_igp()
1220 		hw_dbg("M88E1000 PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_m88()
1239 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");  in igb_phy_force_speed_duplex_m88()
1262 				hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_m88()
1356 		hw_dbg("Half Duplex\n");  in igb_phy_force_speed_duplex_setup()
1360 		hw_dbg("Full Duplex\n");  in igb_phy_force_speed_duplex_setup()
1368 		hw_dbg("Forcing 100mb\n");  in igb_phy_force_speed_duplex_setup()
1373 		hw_dbg("Forcing 10mb\n");  in igb_phy_force_speed_duplex_setup()
1918 		hw_dbg("Phy info is only valid for copper media\n");  in igb_get_phy_info_m88()
1928 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_m88()
1998 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_igp()
2124 	hw_dbg("Running IGP 3 PHY init script\n");  in igb_phy_init_script_igp3()
2273 		hw_dbg("Error committing the PHY changes\n");  in igb_initialize_M88E1512_phy()
2367 		hw_dbg("Error committing the PHY changes\n");  in igb_initialize_M88E1543_phy()
2475 	hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);  in igb_phy_force_speed_duplex_82580()
2480 		hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");  in igb_phy_force_speed_duplex_82580()
2487 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_82580()
2520 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_82580()