Lines Matching refs:here
8 Say Y here, and a list of supported touchscreens will be displayed.
19 Say Y here if you have a 88PM860x PMIC and want to enable
24 To compile this driver as a module, choose M here: the
32 Say Y here if you have a touchscreen interface using the
43 To compile this driver as a module, choose M here: the
50 Say Y here if you have a touchscreen interface using the
56 To compile this driver as a module, choose M here: the
62 Say Y here if you want to support a touchscreen interface using
67 To compile this driver as a module, choose M here: the
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
77 To compile this driver as a module, choose M here: the
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
89 To compile this driver as a module, choose M here: the
98 Say Y here if you want to use the generic ADC
103 To compile this driver as a module, choose M here: the
110 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
115 To compile this driver as a module, choose M here: the
123 Say Y here if you have Atmel mXT series I2C touchscreen,
128 To compile this driver as a module, choose M here: the
137 Say Y here if you want support to output data from the T37
145 Say Y here if you have a AUO display with in-cell touchscreen
150 To compile this driver as a module, choose M here: the
157 Say Y here if you have a bu21013 touchscreen connected to
162 To compile this driver as a module, choose M here: the
169 Say Y here if you have a Rohm BU21029 touchscreen controller
174 To compile this driver as a module, choose M here: the
183 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
187 To compile this driver as a module, choose M here: the
194 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
198 To compile this driver as a module, choose M here: the
205 Say Y here if you have a Cypress CY8CTMA140 capacitive
210 To compile this driver as a module, choose M here: the
218 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
223 To compile this driver as a module, choose M here: the
229 Say Y here if you have a touchscreen using controller from
236 To compile this driver as a module, choose M here: the
243 Say Y here if the touchscreen is connected via I2C bus.
245 To compile this driver as a module, choose M here: the
252 Say Y here if the touchscreen is connected via SPI bus.
254 To compile this driver as a module, choose M here: the
263 Say Y here if you have a Cypress Gen4 touchscreen.
267 To compile this driver as a module, choose M here.
273 Say Y here if the touchscreen is connected via I2C bus.
275 To compile this driver as a module, choose M here: the
282 Say Y here if the touchscreen is connected via SPI bus.
284 To compile this driver as a module, choose M here: the
292 Say Y here to enable the support for the touchscreen found
297 To compile this driver as a module, choose M here: the
304 Say Y here to support the touchscreen found on Dialog Semiconductor
309 To compile this driver as a module, choose M here: the
316 Say Y here if you have a Dynapro serial touchscreen connected to
321 To compile this driver as a module, choose M here: the
328 Say Y here if you have a Hampshire serial touchscreen connected to
333 To compile this driver as a module, choose M here: the
340 Say Y here to enable support for I2C connected EETI touch panels.
342 To compile this driver as a module, choose M here: the
349 Say Y here to enable support for I2C connected EETI
352 To compile this driver as a module, choose M here: the
359 Say Y here to enable support for serial connected EETI
362 To compile this driver as a module, choose M here: the
369 Say Y here to enable support for I2C connected EETI
372 To compile this driver as a module, choose M here: the
379 Say Y here if you have the Fujitsu touchscreen (such as one
385 To compile this driver as a module, choose M here: the
393 Say Y here if you have the Goodix touchscreen (such as one
400 To compile this driver as a module, choose M here: the
407 Say Y here if you have a touchscreen using HiDeep.
411 To compile this driver as a module, choose M here : the
418 Say Y here if you have a touchscreen using Hycon hy46xx
422 To compile this driver as a module, choose M here: the
430 Say Y here if you have a ILI210X based touchscreen
438 To compile this driver as a module, choose M here: the
445 Say Y here if you have touchscreen with ILITEK touch IC,
450 To compile this driver as a module, choose M here: the
457 Say Y here if you want to add support for the IPROC touch
462 To compile this driver as a module, choose M here: the
470 Say Y here if you have the s3c2410 touchscreen.
474 To compile this driver as a module, choose M here: the
485 To compile this driver as module, choose M here: the
492 Say Y here if you have the Gunze AHL-51 touchscreen connected to
497 To compile this driver as a module, choose M here: the
504 Say Y here if you have an Elan eKTF2127 touchscreen
509 To compile this driver as a module, choose M here: the
516 Say Y here if you have an Elan eKTH I2C touchscreen
521 To compile this driver as a module, choose M here: the
528 Say Y here if you have an Elo serial touchscreen connected to
533 To compile this driver as a module, choose M here: the
540 Say Y here if you have an Wacom W8001 penabled serial touchscreen
545 To compile this driver as a module, choose M here: the
552 Say Y here if you want to use the I2C version of the Wacom
557 To compile this driver as a module, choose M here: the module
564 Say Y here if you have a LPC32XX device and want
567 To compile this driver as a module, choose M here: the
574 Say Y here if you have a MAX11801 based touchscreen
579 To compile this driver as a module, choose M here: the
586 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
591 To compile this driver as a module, choose M here: the
598 Say Y here if you have the MELFAS MMS114 touchscreen controller
603 To compile this driver as a module, choose M here: the
610 Say Y here if you have a MELFAS MIP4 Touchscreen device.
614 To compile this driver as a module, choose M here:
622 Say Y here if you have an I2C touchscreen using MStar msg2638.
626 To compile this driver as a module, choose M here: the
633 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
638 To compile this driver as a module, choose M here: the
645 Say Y here if you have an Imagis IST30xxC touchscreen.
648 To compile this driver as a module, choose M here: the
655 Say Y here if you have a Freescale i.MX6UL, and want to
660 To compile this driver as a module, choose M here: the
667 Say Y here if you have an iNexio serial touchscreen connected to
672 To compile this driver as a module, choose M here: the
678 Say Y here if you have the ICS MicroClock MK712 touchscreen
683 To compile this driver as a module, choose M here: the
690 Say Y here if you have a HP Jornada 620/660/680/690 and want to
693 To compile this driver as a module, choose M here: the
700 Say Y here if you have a HP Jornada 710/720/728 and want
703 To compile this driver as a module, choose M here: the
710 Say Y here to enable support for the touchscreen attached to
715 To compile this driver as a module, choose M here: the
722 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
727 To compile this driver as a module, choose M here: the
734 Say Y here if you have a Penmount serial touchscreen connected to
739 To compile this driver as a module, choose M here: the
746 Say Y here if you have an EDT "Polytouch" touchscreen based
752 To compile this driver as a module, choose M here: the
759 Say Y here if you have the official Raspberry Pi 7 inch screen on
764 To compile this driver as a module, choose M here: the
771 Say Y here to enable MIGO-R touchscreen support.
775 To compile this driver as a module, choose M here: the
782 Say Y here if you have a Touchright serial touchscreen connected to
787 To compile this driver as a module, choose M here: the
794 Say Y here if you have a Touchwin serial touchscreen connected to
799 To compile this driver as a module, choose M here: the
806 Say Y here if you have 4/5/8 wire touchscreen controller
811 To compile this driver as a module, choose M here: the
827 To compile this driver as a module, choose M here: the
834 Say Y here if you have a pixcir i2c touchscreen
839 To compile this driver as a module, choose M here: the
846 Say Y here if you have a Weida WDT87XX I2C touchscreen
851 To compile this driver as a module, choose M here: the
861 To compile this driver as a module, choose M here: the
868 Say Y here if you have a Wolfson Microelectronics WM97xx
875 To compile this driver as a module, choose M here: the
883 Say Y here to enable support for the Wolfson Microelectronics
891 Say Y here to enable support for the Wolfson Microelectronics
899 Say Y here to enable support for the Wolfson Microelectronics
907 Say Y here for support for streaming mode with WM97xx touchscreens
912 To compile this driver as a module, choose M here: the
921 Say Y here for support for streaming mode with the touchscreen
926 To compile this driver as a module, choose M here: the
954 To compile this driver as a module, choose M here: the
961 Say Y here if you have a touchscreen connected to the low-resolution
964 To compile this driver as a module, choose M here: the module will be
973 To compile this driver as a module, choose M here: the
980 Say Y here if you have an Freescale MC13783 PMIC on your
985 To compile this driver as a module, choose M here: the
1078 Say Y here if you have an EasyTouch USB Touch controller.
1085 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1089 To compile this driver as a module, choose M here: the
1098 Say Y here if you have a touchscreen on a TS-4800 board.
1105 To compile this driver as a module, choose M here: the
1112 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1117 To compile this driver as a module, choose M here: the
1129 Say Y here if you have a TSC2004 based touchscreen.
1133 To compile this driver as a module, choose M here: the
1142 Say Y here if you have a TSC2005 based touchscreen.
1146 To compile this driver as a module, choose M here: the
1153 Say Y here if you have a TSC2007 based touchscreen.
1157 To compile this driver as a module, choose M here: the
1165 Saying Y here adds an iio interface to the tsc2007 which
1174 Say Y here if you have a Motorola EZX telephone and
1177 To compile this driver as a module, choose M here: the
1185 Say Y here if you have Raydium series I2C touchscreen,
1190 To compile this driver as a module, choose M here: the
1197 Say Y here if you have the Silead touchscreen connected to
1202 To compile this driver as a module, choose M here: the
1215 To compile this driver as a module, choose M here: the
1222 Say Y here if you want to support the Sitronix ST1232
1227 To compile this driver as a module, choose M here: the
1235 Say Y here if you want support for STMicroelectronics
1238 To compile this driver as a module, choose M here: the
1246 Say Y here if you want support for STMicroelectronics
1249 To compile this driver as a module, choose M here: the
1261 To compile this driver as a module, choose M here: the
1270 Say Y here if you want support for the Samsung SUR40 touchscreen
1273 To compile this driver as a module, choose M here: the
1281 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1286 To compile this driver as a module, choose M here: the
1293 Say Y here if you have a Semtech SX8654 touchscreen controller.
1297 To compile this driver as a module, choose M here: the
1304 Say Y here if you have a TPS6507x based touchscreen
1309 To compile this driver as a module, choose M here: the
1316 Say Y here if you have a touchscreen using Zeitec ZET6223
1320 To compile this driver as a module, choose M here: the
1328 Say Y here if you have a touchscreen using the zforce
1333 To compile this driver as a module, choose M here: the
1341 Say Y here if you have a Colibri VF50 and plan to use
1346 To compile this driver as a module, choose M here: the
1353 Say Y here if you have a touchscreen using ROHM BU21023/24.
1357 To compile this driver as a module, choose M here: the
1367 To compile this driver as a module, choose M here: the
1374 Say Y here if you have a touchscreen using Zinitix bt541,
1379 To compile this driver as a module, choose M here: the