Lines Matching refs:here
8 Say Y here, and a list of miscellaneous input drivers will be displayed.
9 Everything that didn't fit into the other categories is here. This option
23 To compile this driver as a module, choose M here: the module
33 To compile this driver as a module, choose M here: the module
40 Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
43 To compile this driver as a module, choose M here: the module
49 Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
53 To compile this driver as a module, choose M here: the
61 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
63 To compile this driver as a module, choose M here: the
71 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
73 To compile this driver as a module, choose M here: the
84 To compile this driver as a module, choose M here: the module
94 To compile this driver as a module, choose M here: the
105 To compile this driver as a module, choose M here: the
113 Say Y here if an Atmel Capacitive Touch Button device which
119 To compile this driver as a module, choose M here: the
126 Say Y here if you have Bosch Sensortec's BMA150 or SMB380
129 To compile this driver as a module, choose M here: the
136 Say Y here to enable support for the NI Ettus Research
139 To compile this driver as a module, choose M here: the
146 Say Y here if you want the standard PC Speaker to be used for
151 To compile this driver as a module, choose M here: the
158 Say Y here if you want support for the power key usually found
163 To compile this driver as a module, choose M here: the module
175 To compile this driver as module, choose M here: the
182 Say Y here if you want support for the PMIC8XXX power key.
186 To compile this driver as a module, choose M here: the
193 Say Y here if you want the standard Speaker on Sparc PCI systems
198 To compile this driver as a module, choose M here: the
211 To compile this driver as a module, choose M here: the module
222 To compile this driver as module, choose M here: the
232 To compile this driver as a module, choose M here: the module
244 To compile this driver as module, choose M here: the
254 To compile this driver as a module, choose M here: the module
261 Say Y here if you want to support Freescale's MMA8450 Accelerometer
264 To compile this driver as a module, choose M here: the
272 Say Y here for support of the Application Panel buttons, used on
277 To compile this driver as a module, choose M here: the module will
284 Say Y here if you have a beeper connected to a GPIO pin.
286 To compile this driver as a module, choose M here: the
293 Say Y here if you want driver to read status of multiple GPIO
297 To compile this driver as a module, choose M here: the module
305 Say Y here to get support for GPIO based vibrator devices.
309 To compile this driver as a module, choose M here: the module will be
316 Say Y here if you want to support MIPS Cobalt button interface.
318 To compile this driver as a module, choose M here: the
325 Say Y here if you want to enable power key reporting via the
328 To compile this driver as a module, choose M here. The module will
339 Say Y here for support of Wistron laptop button interfaces, used on
343 To compile this driver as a module, choose M here: the module will
350 Say Y here for support of Atlas wallmount touchscreen buttons.
353 To compile this driver as a module, choose M here: the module will
361 Say Y here if you want to use an ATI or Philips USB RF remote control.
368 To compile this driver as a module, choose M here: the module will be
376 Say Y here if you want to use a Keyspan DMR USB remote control.
383 To compile this driver as a module, choose M here: the module will
390 Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
393 To compile this driver as a module, choose M here: the module will
401 Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
409 To compile this driver as a module, choose M here: the
417 Say Y here if you want to enable keyboard and LCD functions of the
424 To compile this driver as a module, choose M here: the module will be
432 Say Y here if you want to enable keyboard and buzzer functions of the
436 To compile this driver as a module, choose M here: the module will be
448 To compile this driver as a module, choose M here: the
455 Say Y here if you want to enable power key reporting via the
458 To compile this driver as a module, choose M here. The module will
465 Say Y here if you want to enable power button reporting for
468 To compile this driver as a module, choose M here. The module will
475 Say Y here if you want to enable power key reporting via the
478 To compile this driver as a module, choose M here. The module will
486 Say Y here if you want to enable power key reporting via the
489 To compile this driver as a module, choose M here. The module will
500 To compile this driver as a module, choose M here. The module will
510 To compile this driver as a module, choose M here. The module will
516 Say Y here if you want to support user level drivers for input
519 To compile this driver as a module, choose M here: the
526 Say Y here if you want to support SGI Indy/O2 volume button interface.
528 To compile this driver as a module, choose M here: the
536 Say Y here if you want to support the built-in real time clock
543 Say Y here if you want to enable power key reporting via the
546 To compile this driver as a module, choose M here. The module will
560 Say Y here if you want to support a keypad connected via I2C
563 To compile this driver as a module, choose M here: the
570 Say Y here to get support for PWM based beeper devices.
574 To compile this driver as a module, choose M here: the module will be
582 Say Y here to get support for PWM based vibrator devices.
586 To compile this driver as a module, choose M here: the module will be
597 To compile this driver as a module, choose M here: the module will be
604 Say Y here to add support for rotary encoders connected to GPIO lines.
608 To compile this driver as a module, choose M here: the
616 Say Y here if you want support for the S1 button built into
619 To compile this driver as a module, choose M here: the
631 To compile this driver as a module, choose M here: the
641 To compile this driver as a module, choose M here: the
651 To compile this driver as a module, choose M here: the module
662 To compile this driver as a module, choose M here: the module
673 To compile this driver as a module, choose M here: the
683 To compile this driver as a module, choose M here: the module
690 Say Y here if you want to use Power key and Headphone button
693 To compile this driver as a module, choose M here: the
700 Say Y here if you have a Accelerometer interface using the
710 To compile this driver as a module, choose M here: the
718 Say Y here if you have ADXL345/6 hooked to an I2C bus.
720 To compile this driver as a module, choose M here: the
728 Say Y here if you have ADXL345/6 hooked to a SPI bus.
730 To compile this driver as a module, choose M here: the
737 Say Y here if you have an IBM Operation Panel connected to your system
748 To compile this driver as a module, choose M here: the module will be
756 Say Y here if you have system with IMS Rave Passenger Control Unit.
758 To compile this driver as a module, choose M here: the module will be
769 To compile this driver as a module, choose M here: the
780 To compile this driver as a module, choose M here: the
790 To compile this driver as a module, choose M here: the
796 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
804 To compile this driver as a module, choose M here: the
811 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
814 To compile this driver as a module, choose M here: the
827 To compile this driver as a module, choose M here: the
835 Say Y here if you have an IdeaPad laptop with a slidebar.
837 To compile this driver as a module, choose M here: the
844 Say Y here if you have a SoC-based tablet that originally runs
847 To compile this driver as a module, choose M here: the
859 To compile this driver as a module, choose M here: the
870 To compile this driver as a module, choose M here: the
881 To compile this driver as a module, choose M here: the
890 To compile this driver as a module, choose M here: the
897 Say Y here if you want to enable power key reporting from RAVE SP
899 To compile this driver as a module, choose M here: the
909 To compile this driver as a module, choose M here. The module will
918 To compile this driver as a module, choose M here. the module will
929 To compile this driver as a module, choose M here: the