160 #define DEV_LABEL "lanai"  macro
165 	printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
169 			printk(KERN_ERR DEV_LABEL ": " format, ##args); \
181 	printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
559 	printk(KERN_ERR DEV_LABEL  in sram_test_word()
797 			printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "  in lanai_shutdown_tx_vci()
852 	printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",  in eeprom_read()
923 	printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",  in eeprom_read()
966 		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "  in eeprom_validate()
973 		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "  in eeprom_validate()
981 			printk(KERN_ERR DEV_LABEL  in eeprom_validate()
993 		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "  in eeprom_validate()
1003 		printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "  in eeprom_validate()
1010 		printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "  in eeprom_validate()
1071 	printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",  in status_message()
1092 	printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);  in pcistatus_got()
1101 		printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "  in pcistatus_check()
1112 		printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "  in pcistatus_check()
1257 			printk(KERN_ERR DEV_LABEL "(itf %d): butt register "  in lanai_endtx()
1348 	printk(KERN_INFO DEV_LABEL  in vcc_tx_unqueue_aal0()
1355 	printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");  in vcc_tx_aal0()
1400 		printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "  in vcc_rx_aal5()
1424 	printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");  in vcc_rx_aal0()
1490 		printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "  in lanai_get_sized_buffer()
1562 	printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not "  in lanai_reset()
1683 		printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "  in handle_service()
1825 		printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "  in lanai_int_1()
1834 		printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",  in lanai_int_1()
1842 		printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",  in lanai_int_1()
1847 		printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "  in lanai_int_1()
1854 		printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "  in lanai_int_1()
1919 		printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "  in check_board_id_and_rev()
1936 		printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "  in lanai_pci_start()
1942 		printk(KERN_WARNING DEV_LABEL  in lanai_pci_start()
1952 		printk(KERN_ERR DEV_LABEL "(itf %d): can't write "  in lanai_pci_start()
2138 		printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");  in lanai_dev_open()
2197 	    DEV_LABEL, lanai)) != 0) {  in lanai_dev_open()
2198 		printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");  in lanai_dev_open()
2216 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u "  in lanai_dev_open()
2219 	printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "  in lanai_dev_open()
2251 	printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",  in lanai_dev_close()
2327 	DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,  in lanai_open()
2448 		return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "  in lanai_proc_read()
2560 		printk(KERN_ERR DEV_LABEL  in lanai_init_one()
2565 	atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);  in lanai_init_one()
2567 		printk(KERN_ERR DEV_LABEL  in lanai_init_one()
2594 	.name     = DEV_LABEL,