Lines Matching refs:NVRAM
51 10.2.11 Serial NVRAM
58 12. Serial NVRAM support (by Richard Waltham)
60 17.2 Symbios NVRAM layout
61 17.3 Tekram NVRAM layout
194 :Serial NVRAM: Symbios and Tekram formats
270 If your controller has NVRAM, you can configure this feature per target
286 If your controller does not have NVRAM or if it is managed by the SDMS
586 If a host SCSI id is available from the NVRAM, the driver will ignore
642 10.2.11 Serial NVRAM
648 nvram=n do not look for serial NVRAM
649 nvram=y test controllers for onboard serial NVRAM
657 0x01 look for NVRAM (equivalent to nvram=y)
658 0x02 ignore NVRAM "Synchronous negotiation" parameters for all devices
659 0x04 ignore NVRAM "Wide negotiation" parameter for all devices
660 0x08 ignore NVRAM "Scan at boot time" parameter for all devices
661 0x80 also attach controllers set to OFF in the NVRAM (sym53c8xx only)
723 driver or devices in the NVRAM with minimal features.
827 17. Serial NVRAM (added by Richard Waltham: dormouse@farsrobt.demon.co.uk)
833 Enabling serial NVRAM support enables detection of the serial NVRAM included
835 serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
838 The Symbios NVRAM also holds data on the boot order of host adaptors in a
842 Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
852 The parameters the driver is able to get from the NVRAM depend on the
888 17.2 Symbios NVRAM layout
891 typical data at NVRAM address 0x100 (53c810a NVRAM)::
948 NVRAM layout details
951 NVRAM Address
1003 default set up is identical for 53c810a and 53c875 NVRAM
1026 default set up is identical for 53c810a and 53c875 NVRAM
1054 | | -- ?? max sync offset (0x08 in NVRAM on 53c810a)
1055 | | (0x10 in NVRAM on 53c875)
1070 default set up for 53c810a NVRAM
1071 default set up for 53c875 NVRAM
1084 default set up is identical for 53c810a and 53c875 NVRAM
1092 default set up is identical for 53c810a and 53c875 NVRAM
1094 17.3 Tekram NVRAM layout