Lines Matching refs:Host
34 This driver supports all present BusLogic MultiMaster Host Adapters, and should
36 recently, BusLogic introduced the FlashPoint Host Adapters, which are less
38 Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
43 analogous to the firmware on the MultiMaster Host Adapters. Thanks to their
44 having provided the SCCB Manager, this driver now supports the FlashPoint Host
48 to achieve the full performance that BusLogic SCSI Host Adapters and modern
55 The latest information on Linux support for BusLogic SCSI Host Adapters, as
69 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
70 Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since
146 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
210 On systems that support shared interrupts, any number of BusLogic Host
214 Supported Host Adapters
217 The following list comprises the supported BusLogic SCSI Host Adapters as of
219 Host Adapter not in the following table contact the author beforehand to verify
222 FlashPoint Series PCI Host Adapters:
236 MultiMaster "W" Series Host Adapters:
244 MultiMaster "C" Series Host Adapters:
256 MultiMaster "S" Series Host Adapters:
267 MultiMaster "A" Series Host Adapters:
273 AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
276 BusLogic SCSI Host Adapters are available packaged both as bare boards and as
289 FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
301 FlashPoint Host Adapters ship with their configuration set to "Factory
316 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
325 that previous BusLogic SCSI Host Adapters respond to. This driver supports
343 In systems with multiple BusLogic PCI Host Adapters, the order in which the
399 The "NoProbe" option disables all probing and therefore no BusLogic Host
405 Space and therefore only ISA Multimaster Host Adapters will be detected, as
406 well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
411 The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
417 The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
418 before FlashPoint Host Adapters. By default, if both FlashPoint and PCI
419 MultiMaster Host Adapters are present, this driver will probe for
420 FlashPoint Host Adapters first unless the BIOS primary disk is controlled
421 by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host
426 The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
427 before MultiMaster Host Adapters.
433 presented for execution (either to the Host Adapter or Target Device). Note
445 on the Host Adapter's Total Queue Depth and the number, type, speed, and
461 based on the firmware version of the BusLogic Host Adapter and based on
467 all Target Devices on this Host Adapter, overriding any limitation that
468 would otherwise be imposed based on the Host Adapter firmware version.
473 for all Target Devices on this Host Adapter.
491 seconds. The Bus Settle Time is the amount of time to wait between a Host
498 Target Devices or Inquire Installed Devices command on MultiMaster Host
506 The "TraceProbe" option enables tracing of Host Adapter Probing.
510 The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
515 The "TraceConfiguration" option enables tracing of Host Adapter
579 for BusLogic SCSI Host Adapters. To join the mailing list, send a message to