Lines Matching refs:cable

26 LapLink null-printer cable [can also work in turbo mode, with a PLIP
27 cable]. [The protocol used to pack IP packages, is a simple one
35 The PLIP cable is all that's needed to connect two Linux boxes, and it
72 PLIP driver is signaled whenever data is sent to it via the cable, such that
118 printer "null" cable to transfer data four bits at a time using
129 The cable for the first transfer mode is a standard
130 printer "null" cable which transfers data four bits at a time using
137 A cable that implements this protocol is available commercially as a
138 "Null Printer" or "Turbo Laplink" cable.  It can be constructed with
156 If the cable you are using has a metallic shield it should be
165 nibbles into bytes.  This cable should not be used on unidirectional
170 The cable for this transfer mode should be constructed as follows::
190 Once again, if the cable you are using has a metallic shield it should