Lines Matching refs:queues
26 - TX queues must be rated starting from txq0 that has highest priority
28 - CBS shapers should be used with rated queues
30 potential incoming rate, thus, rate of all incoming tx queues has
150 // Add 4 tx queues, for interface Eth0, and 1 tx queue for Eth1
156 // Check if num of queues is set correctly:
172 // TX queues must be rated starting from 0, so set bws for tx0 and tx1
175 // Leave last 2 tx queues not rated.
176 $ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
177 $ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
181 // Check maximum rate of tx (cpdma) queues:
182 $ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
196 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1
200 // As two interface sharing same set of tx queues, assign all traffic
206 map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@4 hw 0
380 // Add 8 tx queues, for interface Eth0, but they are common, so are accessed
387 // Check if num of queues is set correctly:
403 // TX queues must be rated starting from 0, so set bws for tx0 and tx1 for Eth0
407 // Leave last 4 tx queues as not rated
408 $ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
409 $ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
410 $ echo 30 > /sys/class/net/eth1/queues/tx-2/tx_maxrate
411 $ echo 10 > /sys/class/net/eth1/queues/tx-3/tx_maxrate
415 // Check maximum rate of tx (cpdma) queues:
416 $ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
433 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@4 hw 1
492 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@2 1@3 2@6 hw 1