Lines Matching refs:EEPROM

155 stored in an on-board EEPROM. You must use the DOS-based CS8900/20 Setup
156 Utility if you want to change the adapter's configuration in EEPROM.
159 configuration parameters on the command-line to override the EEPROM's settings
160 or for interface configuration when an EEPROM is not used. (CS8920-based
161 adapters must use an EEPROM.) See Section 3.0 LOADING THE DRIVER AS A MODULE.
221 provides a means to override the EEPROM's settings or for interface
222 configuration when an EEPROM is not used.
250 a) If an EEPROM is present, any specified command-line parameter
252    EEPROM.
271 e) The minimum command-line configuration required if an EEPROM is
279    used with no EEPROM or command-line argument).
330    from the card's EEPROM.
433    * EEPROM Test
435      The EEPROM test insures the EEPROM can be read.
642 For use in embedded environments with no cs89x0 EEPROM, the kernel boot