Lines Matching refs:attributes

67 as well as all sysfs attributes attached to the hwmon device.
77 attributes in the hardware monitoring core, letting the driver focus on reading
78 from and writing to the chip instead of having to bother with sysfs attributes.
165     is optional, but must be provided if any readable attributes exist.
169     optional, but must be provided if any writeable attributes exist.
187      hwmon_chip		A virtual sensor type, used to describe attributes
202     describing the attributes supposed by a single sensor.
266 HWMON_C_xxxx	Chip attributes, for use with hwmon_chip.
267 HWMON_T_xxxx	Temperature attributes, for use with hwmon_temp.
268 HWMON_I_xxxx	Voltage attributes, for use with hwmon_in.
269 HWMON_C_xxxx	Current attributes, for use with hwmon_curr.
270 		Notice the prefix overlap with chip attributes.
271 HWMON_P_xxxx	Power attributes, for use with hwmon_power.
272 HWMON_E_xxxx	Energy attributes, for use with hwmon_energy.
273 HWMON_H_xxxx	Humidity attributes, for use with hwmon_humidity.
274 HWMON_F_xxxx	Fan speed attributes, for use with hwmon_fan.
275 HWMON_PWM_xxxx	PWM control attributes, for use with hwmon_pwm.
351 Driver-provided sysfs attributes
356 it is most likely not necessary to provide sysfs attributes. Only additional
357 non-standard sysfs attributes need to be provided when one of those registration
361 declare and use hardware monitoring sysfs attributes.
364 DEVICE_ATTR_{RW,RO,WO} to declare such attributes. This is feasible if an
369 SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 can be used to define attributes