Lines Matching refs:parameters

48     % echo 2000 > /sys/module/dmatest/parameters/timeout
49     % echo 1 > /sys/module/dmatest/parameters/iterations
50     % echo dma0chan0 > /sys/module/dmatest/parameters/channel
51     % echo 1 > /sys/module/dmatest/parameters/run
60     % echo 2000 > /sys/module/dmatest/parameters/timeout
61     % echo 1 > /sys/module/dmatest/parameters/iterations
62     % echo dma0chan0 > /sys/module/dmatest/parameters/channel
63     % echo dma0chan1 > /sys/module/dmatest/parameters/channel
64     % echo dma0chan2 > /sys/module/dmatest/parameters/channel
65     % echo 1 > /sys/module/dmatest/parameters/run
69   the channel parameter(s) must be set after all other parameters. It is at
71   thread(s). All other parameters are shared. Therefore, if changes are made
72   to any of the other parameters, and an additional channel specified, the
73   (shared) parameters used for all threads will use the new values.
90     % cat /sys/module/dmatest/parameters/run
95 /sys/module/dmatest/parameters/wait waits for any running test to complete
108     % cat /sys/module/dmatest/parameters/wait
114 The module parameters that is supplied to the kernel command line will be used
116 re-run with the same or different parameters. For the details see the above
119 In both cases the module parameters are used as the actual values for the test
122     % grep -H . /sys/module/dmatest/parameters/*
162     % echo 1 > /sys/module/dmatest/parameters/run
170     % echo dma0chan2 > /sys/module/dmatest/parameters/channel
178     % echo dma0chan1 > /sys/module/dmatest/parameters/channel
180     % echo dma0chan2 > /sys/module/dmatest/parameters/channel
182     % cat /sys/module/dmatest/parameters/channel
190     % echo "" > /sys/module/dmatest/parameters/channel
204     % cat /sys/module/dmatest/parameters/test_list
223     % echo dma0chan1 > /sys/module/dmatest/parameters/channel
227     % echo 0 > /sys/module/dmatest/parameters/run